3party/mongoose
0
0
Fork 0
mirror of https://github.com/cesanta/mongoose.git synced 2024-12-26 22:41:03 +08:00
Code Issues Projects Releases Wiki Activity
mongoose/examples/esp32/uart-bridge/README.md
Sergio R. Caprile 4245a6d04d update
2023-03-08 11:44:34 -03:00

1.6 KiB
Raw Permalink Blame History

A UART to network bridge for ESP32

Flash pre-built firmware

You can flash a pre-built firmware to the ESP32 device using the following instructions:

  1. Connect your ESP32 device to the workstation. It should be accessible via a serial port
  2. Download and unzip ESP32 flashing tool from https://mongoose.ws/downloads/esputil.zip
  3. Download a prebuilt firmware https://mongoose.ws/downloads/uart-bridge.hex into the unzipped directory
  4. Start command prompt (or terminal on Mac/Linux). Run cd PATH/TO/esputil to go into the unzipped esputil/ directory. After that, run the following command (change COMPORT to the board's serial port):
OS Command
Windows 
.\windows\esputil -p COMPORT flash uart-bridge.hex
Linux 
./linux/esputil -p COMPORT flash uart-bridge.hex
MacOS 
./macos/esputil -p COMPORT flash uart-bridge.hex

Next step is to monitor and follow the instructions.

esputil -p COMPORT monitor

Note: if monitor command shows constant restarts, the flash parameters settings can be wrong. Reflash your device with -fp ... flash parameters settings. For example, WROOM-32 based boards use -fp 0x220:

esputil -p COMPORT -fp 0x220 flash uart-bridge.hex

For more on possible options for flash parameters, see https://github.com/cpq/esputil#flash-parameters