Solution: if a PING message contains a context, echo it back in the
PONG message. In order to do so, create the PONG message when PING
is received and store it in the engine.
After the PING the engine goes straight to encoding and sending, so
there can always be at most one pending PING.
Add tests for various contexts.
Solution: revert the revert!
Revert "Problem: regression in 4.2.3 went unnoticed, want to release 4.2.5"
This reverts commit 5f17e26fa4c60c3de0282d1b6ad1e8b7037ed57a.
Solution: revert DRAFT -> STABLE API transition so that we can do a
bugfix-only 4.2.5 release.
Will be re-reverted once tagged.
Revert "Problem: ZMQ_BINDTODEVICE has met STABLE conditions"
This reverts commit 3cb79f5042cf32cdb7b1b58d4acf17eba85ec9f7.
Revert "Problem: ZMQ_MSG_GSSAPI_* have met STABLE conditions"
This reverts commit 374da4207b8034b0fcd67a2cc2165d50e09b9387.
Revert "Problem: ZMQ_MSG_T_SIZE has met STABLE conditions"
This reverts commit 6411c4a247c08ead50919d16b30eb030eaf44a7e.
Revert "Problem: docs say STABLE API still in DRAFT"
This reverts commit 9f2f30b7ffa09acc51d3b87251a47e83b435d5d4.
Solution: like for other mechanism, do not enforce strict ZAP protocol
adherence unless the specific socket option is enabled with NULL auth.
Add test to exercise this functionality, and fix ZAP test to set the
socket option when it uses NULL auth.
See: https://github.com/zeromq/pyzmq/pull/1152
Lets the application set per-connection metadata.
Metadata is specified as "X-key:value" and set using zmq_setsockopt, eg:
zmq_setsockopt (s, ZMQ_METADATA, "X-key:value", 11);
The peer can then obtain the metadata from a received message:
char *data = zmq_msg_gets(msg, "X-key");
* Problem: TIPC availability check is too strict
Solution: at build time only check if the API is available. In the tests
do a first check and a skip if the functionality is not available.
TIPC needs an in-tree but not loaded by default kernel module, tipc.ko
to be loaded, which requires root, so it is unlikely to be available on
any build system by default.
This will allow most distributions to ship with TIPC support built in,
and to avoid tests failure if the module is not there.
* Problem: no Travis tests for TIPC
Solution: mark one job with sudo: required and load the kernel module
* Problem: CMake fails when test returns 77 (skip)
Solution: set property to let it mark the test as skipped as intended
* Tests for different TIPC address types and code cleanup
* Adds tests for binding/connecting with different TIPC address types
using Unity
* Adds error checking for address type misuse
The zero copy decoding strategy implemented for 4.2.0 can lead to a large
increase of main memory usage in some cases (I have seen one program go up to
40G from 10G after upgrading from 4.1.4). This commit adds a new option to
contexts, called ZMQ_ZERO_COPY_RECV, which allows one to switch to the old
decoding strategy.
Solution: set 0 linger on the sockets immediately after creating them
rather than immediately before closing them.
Running through helgrind/drd highlights a few race conditions, one of
which is the setting of linger vs checking it when closing the socket.
Work around it by setting it immediately to fix the test hangs.
Solution: print unsigned integers instead of size_t to avoid the error:
error: ISO C++ does not support the 'z' gnu_printf length modifier
due to very old version of GCC.
* Background thread scheduling
- add ZMQ_THREAD_AFFINITY ctx option; set all thread scheduling options
from the context of the secondary thread instead of using the main
process thread context!
- change ZMQ_THREAD_PRIORITY to support setting NICE of the background
thread when using SCHED_OTHER
Solution: add ZMQ_ZAP_ENFORCE_DOMAIN to hide backward incompatible
change and make it disabled by default.
In a future release that breaks API compatibility we can then switch
the default to enabled in order to achieve full RFC compatibility.
Fixes#2762
Solution: when a connection breaks and ZMQ_RECONNECT_IVL is set to -1,
which means a reconnection will not be attempted, send a message from
the I/O thread to the application thread to make the socket call
term_endpoint, which is the equivalent of manually calling
zmq_disconnect.
This way subsequent zmq_connect call to the same endpoint will attempt
again to do a connection.
Otherwise, for some socket types like SUBs, those new connects will
fail as the endpoint is recorded, despite the connection having been
permanently closed.
Add test cases to exercise this corner case with TCP and IPC.
receive an ERROR (probably because the connection is closed before)
Solution: wait for client-side monitor events before closing the client
socket
Fixes#2705
Solution: added tests for CURVE, add emitting of client-side event in curve_client_t; add ZAP code 300/500 tests for all mechanisms; suppress sending an error message for ZAP code 300
Solution: do it to avoid leaks. Even though they are below 33 bytes so
it's all allocated on the stack, the small message size might change in
the future.
* Problem: no test case with CURVE encryption and large identity
Solution: added test case (currently crashing)
* Problem: possible buffer overflow in mechanism_t::add_property
Solution: add target buffer length parameter and check the buffer is sufficiently large
* Problem: test cases accidentally excluded from build
Solution: remove #if/#endif
* Problem: possible buffer overruns related to metadata at various locations
Solution: allocate buffer large enough for actual metadata, reduce code duplication
* Problem: syntax error related to pointer type conversion
Solution: change argument type of make_command_with_basic_properties to const char *
* Problem: large metadata may cause an assertion in produce_initiate
Solution: Allow metadata of arbitrary size in produce_initiate
* Extracted connect_vanilla_socket function
* Problem: no tests for ZMTP-CURVE protocol errors
Solution: added two test cases with erroneous HELLO commands
* Problem: insufficient tests for ZMTP-CURVE protocol errors
Solution: added two test cases with erroneous HELLO command version
* Problem: test HELLO message is invalid apart from deliberate errors
Solution: create cryptographically correct HELLO message
add tweetnacl.c to test_security_curve
* Problem: nonce is incorrect, build fails with GCC
Solution: use correct non prefix
* Problem: make builds are failing
Solution: transfer CMake changes to (auto)make files
* Problem: nonce is incorrect, build fails with GCC
Solution: use correct non prefix
* Problem: make builds are failing
Solution: transfer CMake changes to (auto)make files
* Problem: no test with INITIATE command with invalid length
Solution: added test case
* Problem: code duplication between test_security_curve.cpp and curve_client.cpp
Solution: extracted parts of zmq::curve_client_t::produce_hello into reusable function
* Problem: code duplication between test_security_curve.cpp and curve_client.cpp
Solution: extracted further parts of zmq::curve_client_t into reusable functions
added missing file
* Problem: mechanism_t::add_property can be declared static
Solution: declare mechanism_t::add_property static
* Problem: intermediate crypto data needs to be passed between static function calls to curve_client_tools_t
Solution: add non-static member functions
* Problem: msg_t instance may be closed twice
Solution: remove offending close
* Problem: prepare_hello uses static curve_client_tools_t::produce_hello
Solution: Use non-static curve_client_tools_t::produce_hello
* Problem: no test with invalid command name where INITIATE command is expected
Solution: added test case
* Problem: make builds are failing due to curve_client_tools.hpp not being found
Solution: add curve_client_tools.hpp to list of source files
* Problem: wrong initializer order in zmq::curve_client_t
Solution: reorder
* Problem: under non-Windows systems, test fails because random_open was not called
Solution: call random_open/random_close within test
* Problem: conflict between custom function htonll and macro definition on Darwin
Solution: define htonll function only if not defined as a macro
* Problem: nullptr not defined on all platforms
Solution: replace nullptr by NULL
* Problem: libsodium builds not working
Solution: adapt compile and link file sets for libsodium builds
* Problem: Makefile.am broken
Solution: Fix syntax
* Problem: no tests for garbage encrypted cookie or content in INITIATE
Solution: added test cases
* Problem: test cases accidentally excluded from build
Solution: remove #if/#endif
* Solution: some error cases are unreachable
Problem: for the time being, added some comments without changing the code
* Added comments on hard-to-test cases
* Problem: missing test for status code 300, inadequate assertion for status code 500
Solution: add test, change assertion (currently test fails)
* Problem: gcc compiler error deprecated conversion from string constant
Solution: declare variable as const
* Problem: in case of ZAP handler returning a status code other than 200, no appropriate event is emitted
Solution: immediately emit event after receiving reply from ZAP handler
* Problem: endpoint address is not included in zap-reply monitor event
Solution: added functions to retrieve endpoint address in zmq::i_engine and zmq::session_base_t
removed unused code block in zmq::stream_engine_t::next_handshake_command
* Problem: wrong formatting
Solution: fix formatting
* Problem: test fails because of EPIPE
Solution: add EPIPE/ECONNRESET/ECONNAGAIN handling for more test cases
* Problem: CI failure on Appveyor with err==ECONNRESET
Solution: ignore ECONNRESET analogous to EPIPE
* Problem: blocking test execution
Solution: added more debug output, do not wait for monitor infinitely without output
Solution: refactor the ZAP thread to avoid creating the socket in the
main thread and using it in the ZAP thread, and also to eliminate
races at shutdown use another inproc control socket to signal
termination to the thread
Solution: ignore ECONNRESET as with EPIPE - it can happen on very
slow machines when the engine sends data to the peer and then tries
to read from the TCP socket before the peer has read
Solution: removed code duplication
improved global variable naming
added assertions on number of ZAP requests handled
added assertion on monitor event to test_curve_security_with_plain_client_credentials
* Problem: no tests for ZAP protocol errors
Solution: added first test for a bogus version number in ZAP reply
* Problem: no tests for ZAP protocol errors
Solution: added more test cases
* Problem: cannot compile without ZMQ_BUILD_DRAFT_API
Solution: conditionally compile parts that depend on draft API
* Problem: test_security_curve times out in CI
Solution: Increase timeout for this test to 20 seconds
* Fixing #2002 one way of doing it
* Mechanisms can implement a new method `error_detail()`
* This error detail have three values for the moment: no_detail
(default), protocol, encryption.
+ generic enough to make sense for all mechanisms.
- low granularity level on information.
* Fixing #2002: implementation of the error details
The ZMQ_EVENT_HANDSHAKE_FAILED event carries the error details
as value.
* Removed Microsoft extenstion for enum member access
This was leading to compilation error under linux.
* Adaptation of CURVE test cases
* Monitoring event: changed API for detailed events
Removed ZMQ_EVENT_HANDSHAKE_FAILED and replaced it by:
- ZMQ_EVENT_HANDSHAKE_FAILED_NO_DETAIL,
- ZMQ_EVENT_HANDSHAKE_FAILED_PROTOCOL,
- ZMQ_EVENT_HANDSHAKE_FAILED_ENCRYPTION
Adaptation of text case `security_curve`
* Removed event value comparison
This was introduced for the previous API model adaptation
* Removed the prints in std output and added missing details
`current_error_detail` was not set in every protocol error cases
* Fixed initialization of current_error_detail
* Fixed error in greeting test case
The handshake failure due to mechanism mismatch in greeting is actually
a protocol error. The error handling method consider it like so and
send a protocol handshake failure monitoring event instead of no_detail.
Fixed the test_security_curve expectation as well.
* Upgraded tests of monitoring events
The tests check the number of monitoring events received
* Problem: does not build under Linux or without ZMQ_DRAFT_API
Solution:
- properly use ZMQ_DRAFT_API conditional compilation
- use receive timeouts instead of Sleep
* Problem: duplicate definition of variable 'timeout'
Solution: merged definitions
* Problem: inconsistent timing dependencies
Solution: reduce timing dependency by using timeouts at more places
* Problem: assertion failure under Linux due to unexpected monitor event
Solution: output event type to aid debugging
* Problem: erroneous assertion code
* Problem: assertion failure with a garbage server key due to an extra third event
Solution: changed assertion to expect three events (needs to be checked)
* Problem: extra include directive to non-existent file
Solution: removed include directive
* Problem: assertion failure on appveyor for unknown reason
Solution: improve debug output
* Problem: no build with libsodium and draft api
Solution: add build configurations with libsodium and draft api
* Problem: assertion failure on CI
Solution: change assertion to reflect actual behaviour on CI (at least temporarily)
* Problem: error in condition in assertion code
* Problem: assertion failure on CI
Solution: generalize assertion to match behavior on CI
* Problem: assertion failures on CI
Solution: removed inconsistent assertion on no monitor events before flushing
improved debuggability by converting function into macro
* Problem: diverging test code for three analogous test cases with garbage key
Solution: extract common code into function
* Problem: does not build without ZMQ_BUILD_DRAFT_API
Solution: introduce dummy variable
* Attempt to remove workaround regarding ZMQ_EVENT_HANDSHAKE_FAILED_NO_DETAIL again
* Problem: EAGAIN error after handshake complete if there is no more data in inbuffer
Solution: Skip tcp_read attempt in that case
* Problem: handshaking event emitted after handshaking failed
Solution: use stream_engine_t::handshaking instead of mechanism_t::status() to determine whether still handshaking
* Include error code in debug output
* Improve debugging output: output flushed events
* Split up ZMQ_EVENT_HANDSHAKE_FAILED_PROTOCOL into ZMQ_EVENT_HANDSHAKE_FAILED_ZMTP and ZMQ_EVENT_HANDSHAKE_FAILED_ZAP
* Fixed compilation without ZMQ_BUILD_DRAFT_API
* Renamed ZMQ_EVENT_HANDSHAKE_SUCCEED to ZMQ_EVENT_HANDSHAKE_SUCCEEDED for language consistency
* Renamed ZMQ_EVENT_HANDSHAKE_SUCCEED to ZMQ_EVENT_HANDSHAKE_SUCCEEDED for language consistency
* Renamed ZMQ_EVENT_HANDSHAKE_SUCCEED to ZMQ_EVENT_HANDSHAKE_SUCCEEDED for language consistency
* Fixed assert_monitor_event (require event instead of allowing no event)
Reverted erroneous change to handshaking condition
Renamed test_wrong_key to test_garbage_key
Generalized assumption in test_garbage_key to allow for ZMQ_EVENT_HANDSHAKE_FAILED_NO_DETAIL with error == EPIPE
* Better isolate test cases from each other by providing a fresh context & server for each
* Added diagnostic output
* Changed assertion to reflect actual behavior on CI
* Fixed formatting, observe maximum line length
* Fixed formatting, observe maximum line length
* Increase timeout to check if this fixes valgrind run
* Close server with close_zero_linger
* Increase timeout to check if this fixes valgrind run
* Increase timeout to check if this fixes valgrind run
* Generalize assertion to also work with valgrind
* Fixed formatting
* Add more diagnostic output
* Generalize assertion to also work with valgrind
Linux now supports Virtual Routing and Forwarding (VRF) as per:
https://www.kernel.org/doc/Documentation/networking/vrf.txt
In order for an application to bind or connect to a socket with an
address in a VRF, they need to first bind the socket to the VRF device:
setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, dev, strlen(dev)+1);
Note "dev" is the VRF device, eg. VRF "blue", rather than an interface
enslaved to the VRF.
Add a new socket option, ZMQ_BINDTODEVICE, to bind a socket to a device.
In general, if a socket is bound to a device, eg. an interface, only
packets received from that particular device are processed by the socket.
If device is a VRF device, then subsequent binds/connects to that socket
use addresses in the VRF routing table.
Solution: remove the pipe from the real trie when a peer disconnects.
Also add a unit test that exercises the behaviour by reconnecting
a different socket and sending a message that matches.
Fixes#2601 and introduced by #2042
Solution: use lower case ws2_32.lib to enable cross compilation
from platforms with case-sensitive filesystems.
When cross compiling the tests with Mingw-w64, CMake cannot
locate Ws2_32.lib
Solution: revert change that made ZAP mandatory.
The "Stonehouse" pattern, where CURVE is used only for encryption and
without authentication, is a valid use case so we should still
support it.
Also restore CURVE testing in the test_heartbeat.
Fixes#2594
Solution: roll back the pipe if writing messages other than the
first fails in router::xsend. Roll it back also when the pipe is
terminating.
Also add test case that reproduces the memory leak when ran with
valgrind.
Fixes#2567
Solution: roll back the pipe if writing messages other than the
first fails in router::xsend.
Also add test case that reproduces the memory leak when ran with
valgrind.
Fixes#2567
Solution: use either a wildcard IPC, or where the codepath needs to
be tested a file named after the test, so that it is unique and there
is no clash on the filesystem, allowing parallel test runs.
Solution: use ZMQ_LAST_ENDPOINT in most places. This alllows running
tests in paralle, and on over-booked shared machines where many of
the ports would be already in use.
Keep 3 tests with an hardcoded port, as there are some code paths that
require it (eg: connect before bind), but list those ports in
tests/testutil.hpp as macros so that they do not overlap and still
allow parallel runs.
These changes were inspired by a patch uploaded to Ubuntu by the
package maintainer, Steve Langasek <steve.langasek@ubuntu.com>.
Thank you Steve!
Problem: there is no test coverage for GSSAPI.
Solution: add a test structured like the CURVE test.
The test is not built if libzmq is not configured with
--with-libgssapi_krb5. It will report SKIPPED status
if the required environment is missing (see below).
Environment: KRB5_KTNAME and KRB5_CLIENT_KTNAME
environment variables must point to a keytab file
containing creds for a host-based test principal
(see comment at top of source for details).
Kerberos must be configured and a KDC containing the
test principal must be running, otherwise the test
will fail/hang.
N.B. For now, the test must use the same principal for
both client and server roles because it seems impossible
to set them to different principals when they are
threads in the same process. Once one principal is
cached in credential cache, attempts to acquire creds
for a different "desired name" seem to be ignored and
the cached principal is used instead.
Remove the `build/msvc` include path from the test project to fix a
problem with the order of the include paths. Additionally remove the
unnecessary `include_directories` from the master project.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Solution:
Revert "Problem with ZMQ_ROUTER_MANDATORY option when peer lost"
This partially reverts commit 06740b5d8c1fbf13205c9b6c63ba7e7ef4350a04.
The change in the mentioned commit was fixed to be backward
compatible so test changes are no longer necessary.
Partially revert the commit, leaving only the bug fix and taking out
the test change and the superfluous change in socket_base.
indention
Revert "indention"
This reverts commit a6e7e192ac2d089ac9f7dc0d31d4b1fd10de982e.
indention
indention
Fix Failure in tests
Check both pipe full and pipe close
* Problem: zmq_z85_decode does not validate its input
Solution: added checks for invalid characters and overflows
* Added tests, added further check for range overflow, removed (multiple) calls to strlen
* Problem: gcc fails to build
Solution: added missing include directive
* Added VS2015 test_utils_z85 project
* Fixed indentation and copyright notice
* Resolved garbage from merge
* Revert "Added VS2015 test_utils_z85 project"
This reverts commit c58b3c664c144326e77135aa1184b6f0dee11143.
* Problem: test calls zmq_z85_decode with a NULL dest
Solution: call zmq_z85_decode with a properly sized buffer
* Problem: tests for zmq_z85_* scattered over two files
Solution: merged files
* Removed reference to removed test file from CMakeLists.txt
* Problem: Missing include directive to stdint.h
Solution: Added include directive
* Define __STDC_LIMIT_MACROS before including stdint.h
* Problem: Wrong variable is checked for invalid character marker
Solution: Use correct variable
Solution: wrap the event triggering in the DRAFT ifdef as well as the
defines. This ensures that the event are returned only if the
library was built with DRAFTs enabled.
Also update the test case to expect the new events since it uses
the catch-all mask. Although the sequence of event is different and
this might be considered as an API breakage, using the catch-all
ZMQ_EVENT_ALL mask implies that, well, all events are monitored so
it's normal that new ones will be added.
Users that don't want this kind of behaviour to change can simply
monitor only the event that they care about.
Solution: during a connect with a TCP endpoint if a source address is
passed set the SO_REUSEADDR flag on the socket before the bind system
call.
Add unit test to cover this case for both IPv4 and IPv6.
Solution: check if the connecting inproc socket has been closed
before trying to send the identity.
Otherwise the pipe will be in waiting_for_delimiter state causing
writes to fail and the connect to assert when the context is being
torn down and the pending inproc connects are resolved.
Add test case that covers this behaviour.
Solution: allow for '[' character when doing the basic sanity check
on the TCP endpoint.
Also add unit tests for both IPv4 and IPv6 source;dest format.
only if the library is found at a specific path
Solution: Search for libzmq.lib in ../bin/Win32/Debug/v120/dynamic, don't
know how to automatically search in correct path based on current build
configuration
Solution:
- Add checks for **poller_p_ to ensure that we do not segfault when either it
or the value within it are NULL
- Add tests for the above and increase error state coverage
Solution:
- Add error state coverage for zmq_ctx_term(), zmq_term() and
zmq_ctx_shutdown(); zmq_ctx_destroy() is already covered since it only
calls zmq_ctx_term()
- Add coverage for zmq_term()
The TIPC protocol bindings in ZeroMQ defaults to a lookup domain
of 1.0.0 to prevent 'closest first' search, and instead always
do round robin if several sockets in the network or node have
the same name published. In retrospect, this might have been a
bad idea because it won't work on standalone configurations.
We solve this by allowing an optional domain suffix to be provided
in the address, and 0.0.0 should be used in that case, or if the
TIPC address range in the cluster configuration is defined to some
other value. Domain suffixes are only relevant for connecting
addresses.
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Solution:
- Add file for testing ancillary API methods and any misc internal machinery
- Add tests for zmq_version(3) and zmq_strerror(3)
- Add test file into gitignore, Autotools and CMake build files
- Increase test coverage
Note:
MSVC solution files have not been updated.
Solution:
- Add check for the [count] parameter in zmq_sendiov() and zmq_recviov()
- Use and add test for zmq_sendiov() in tests/test_iov.cpp
- Add error state tests for zmq_sendiov() in tests/test_iov.cpp
- Add error state tests for zmq_recviov() in tests/test_iov.cpp
- Cleanup tests/test_iov.cpp for style, consistency and clarity
- Generally improve test coverage for both API methods
Hat-tip:
@somdoron, @bluca
Solution:
- Adjust test_xpub_proxy_unsubscribe_disconnect() to support different
protocol types
- Exclude the IPC tests on Windows and OpenVMS
H/T: @somdoron
Solution: PR #1906 did not solve this problem properly; subsequent Travis CI
indicated that the issue happens with Clang/LLVM, so make sure to fix the
issue by detecting if Cmake CMake is using Clang for building the tests.
Solution: add macro in ZMQSourceRunChecks.cmake and optionally
include the TIPC sources if the support is available.
More importantly, only run the TIPC tests if the support is there.
Problem:
A per-test Linker search path was added in commit a911fa4 to CMakeLists.txt as
part of fixing Windows builds. Whilst this is silently ignored by ld(1) on
Linux, it doesn't settle well with OS X. Spurious warnings are generated about
missing directories leading to convoluted build logs.
Solution:
Make per-Test LINK_DIRECTORIES() conditional for non-Apple platforms.
Solution: try to resolve the TCP endpoint passed by the user in the
zmq_unbind call before giving up, if it doesn't match.
This fixes a breakage in the API, where after a call to
zmq_bind(s, "tcp://127.0.0.1:9999") with IPv6 enabled on s would
result in the call to zmq_unbind(s, "tcp://127.0.0.1:9999") failing.
Add more test cases to increase coverage on all combinations of TCP
endpoints.
Solution: add helper function is_ipv6_available to testutil.hpp to
test if IPv6 is available on the building platform.
This function will try to open and bind a socket to ::1:*, as it's
the ultimate way of knowing if, at least on the loopback, IPv6 is
enabled.
Move tests specific to Linux under a platform conditional thereby eliminating
unnecessary builds and fixing "make test" on Mac OS X and possibly other
non-Linux systems.
Tests specific to Linux:
- abstract namespace support for AF_UNIX sockets
- TIPC support (AF_TIPC)
Test success rate jumps from 90% to 100% on Mac OS X after this change.
Solution: return -1 (no event) instead of 0 (event)
For some reason, this just returns 0 if there are no sockets registered
on the poller. Usually this would mean there has been an event. So the
caller would have to check the return value AND the event, or write code
that takes the number of registered sockets into consideration.
By returning -1 and setting errno = ETIMEDOUT like in the usual timeout
cases, it's more consistent and convenient.
Test case included.
Problem: Since pull request #1730 was merged, protocol for REQ socket is
checked at the session level and this check does not take into account
the possibility of a request_id being part of the message. Thus the option
ZMQ_REQ_CORRELATE would no longer work.
This is now fixed: the possiblity of a 4 bytes integer being present
before the delimiter frame is taken into account (whether or not this
breaks the REQ/REP RFC is another issue).
Problem: when using ZMQ_REQ_RELAXED + ZMQ_REQ_CORRELATE and two 'send' are
executed in a row and no server is available at the time of the sends,
then the internal request_id used to identify messages gets corrupted and
the two messages end up with the same request_id. The correlation no
longer works in that case and you may end up with the wrong message.
Solution: make a copy of the request_id instance member before sending it
down the pipe.
Solution: remove temporarily until proper message limits have been
implemented, then a more granular test case can be added without
such high requirements which are problematic in embedded environment,
build systems, VMs and CI systems
Solution: Add precompiled flags to CMakeList.txt for faster compiles
+ bonus - removed compilation warning on Windows by adding
add_definitions (-D_WINSOCK_DEPRECATED_NO_WARNINGS)
Solution: Modified CMakelist.txt to build correctly for Windows
- corrected CMake required version to make sure it builds in
Ubuntu 14.04 LTS with no warnings.
Solution: add msleep (SETTLE_TIME) to test_immediate, test_spec_rep
and test_spec_router after the sockets are created and connected to
avoid failing when running in slower environment like through
Valgrind in underpowered VMs.
Solution: use msleep (SETTLE_TIME) everywhere when waiting for the
connections/sockets to be settled instead of a variety of patterns
and functions to make tests more coherent.
There were numerous small issues with test cases:
- some lacked the right source file header
- some were not portable at all
- some were using internal libzmq APIs (headers)
Solution: fixed and cleaned up.
There were numerous small issues with test cases:
- some lacked the right source file header
- some were not portable at all
- some were using internal libzmq APIs (headers)
Solution: fixed and cleaned up.
Solution: it's a lot of work to define the tests in project.gyp
so I did this using gsl to generate the JSON, from a small XML
list of the test cases.
To keep this, and the hundreds of .mk files, away from the root
directory, I've moved the gyp files into builds/gyp, where you
would run them.
It all seems to work now. Next up, OS/X and Windows :)
It's unclear which we need and in the source code, conditional code
treats tweetnacl as a subclass of libsodium, which is inaccurate.
Solution: redesign the configure/cmake API for this:
* tweetnacl is present by default and cannot be enabled
* libsodium can be enabled using --with-libsodium, which replaces
the built-in tweetnacl
* CURVE encryption can be disabled entirely using --enable-curve=no
The macros we define in platform.hpp are:
ZMQ_HAVE_CURVE 1 // When CURVE is enabled
HAVE_LIBSODIUM 1 // When we are using libsodium
HAVE_TWEETNACL 1 // When we're using tweetnacl (default)
As of this patch, the default build of libzmq always has CURVE
security, and always uses tweetnacl.
And I'm on a reasonably sized laptop. I think allocating INT_MAX
memory is dangerous in a test case.
Solution: expose this as a context option. I've used ZMQ_MAX_MSGSZ
and documented it and implemented the API. However I don't know how
to get the parent context for a socket, so the code in zmq.cpp is
still unfinished.
Solution: be more explicit in the code, and in the zmq_recv man
page (which is the most unobvious case). Assert if length is not
zero and buffer is nonetheless null.
It is poor style for test cases to use the internal API (i.e.
libzmq classes or header files), as this code serves the purpose
of teaching developers how to use the library (it doesn't do this
very well, it's an ambition).
Also, including headers in src/ creates problems when compiling.
Solution: remove use of src/macros.hpp.
Solution: parse the value set by the ZMQ_PRE_ALLOCATED_FD sockopt
when creating a new TCP socket and use it if valid.
Add new tests/test_pre_allocated_fd_tcp.cpp unit test.
Solution: parse the value set by the ZMQ_PRE_ALLOCATED_FD sockopt
when creating a new IPC socket and use it if valid.
Add new tests/test_pre_allocated_fd_ipc.cpp unit test.
Solution: add new [set|get]sockopt ZMQ_PRE_ALLOCATED_FD to allow
users to let ZMQ use a pre-allocated file descriptor instead of
allocating a new one. Update [set|get]sockopt documentation and
test accordingly.
The main use case for this feature is a socket-activated systemd
service. For more information about this feature see:
http://0pointer.de/blog/projects/socket-activation.html
This commit addresses the following warnings reported on gcc 5.2.1. In
the future, this will help reduce the "noise" and help catch warnings
revealing a serious problem.
8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---
/path/to/libzmq/tests/test_stream_exceeds_buffer.cpp: In function ‘int main()’:
/path/to/libzmq/tests/test_stream_exceeds_buffer.cpp:19:9: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc = setsockopt(server_sock, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(enable));
^
8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---
This commit fixes the author warnings reported below. These tests
have originally been introduced in zeromq/libzmq@5ebfd17 and
zeromq/libzmq@5fe75f0.
8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---
CMake Warning (dev) at tests/CMakeLists.txt:133 (message):
Test 'test_udp' is not known to CTest.
This warning is for project developers. Use -Wno-dev to suppress it.
CMake Warning (dev) at tests/CMakeLists.txt:133 (message):
Test 'test_large_msg' is not known to CTest.
This warning is for project developers. Use -Wno-dev to suppress it.
8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---8<---
