sed -i '' -E -e 's/Copyright (.+) The Crashpad Authors\. All rights reserved\.$/Copyright \1 The Crashpad Authors/' $(git grep -El 'Copyright (.+) The Crashpad Authors\. All rights reserved\.$')
Bug: chromium:1098010
Change-Id: I8d6138469ddbe3d281a5d83f64cf918ec2491611
Reviewed-on: https://chromium-review.googlesource.com/c/crashpad/crashpad/+/3878262
Reviewed-by: Joshua Peraza <jperaza@chromium.org>
Commit-Queue: Mark Mentovai <mark@chromium.org>
This change was partially scripted and partially done manually with vim
regex + manually placing the deleted constructors.
The script change looked for destructors in the public: section of a
class, if that existed the deleted constructors would go before the
destructor.
For manual placement I looked for any constructor in the public: section
of the corresponding class. If there wasn't one, then it would ideally
have gone as the first entry except below enums, classes and typedefs.
This may not have been perfect, but is hopefully good enough. Fingers
crossed.
#include "base/macros.h" is removed from files that don't use
ignore_result, which is the only other thing defined in base/macros.h.
Bug: chromium:1010217
Change-Id: I099526255a40b1ac1264904b4ece2f3f503c9418
Reviewed-on: https://chromium-review.googlesource.com/c/crashpad/crashpad/+/3171034
Reviewed-by: Mark Mentovai <mark@chromium.org>
Commit-Queue: Peter Boström <pbos@chromium.org>
As of
00a0654929,
crashpad_util_test is able to run in Chromium. It uses Chromium’s own
base::TestLauncher rather than gtest’s RUN_ALL_TESTS() for proper
integration with Swarming.
Launching WinMultiprocess test children out of the same test executable
via WinChildProcess is not compatible with Chromium’s parallel, shardy,
Swarmy test launcher. When running these children, the standard gtest
RUN_ALL_TESTS() launcher will now be used, even in Chromium.
Two tests disabled in Chromium are now enabled:
ExceptionHandlerServerTest.MultipleConnections and
ScopedProcessSuspend.ScopedProcessSuspend.
As part of this work, I discovered that disabled tests chosen to run via
--gtest_also_run_disabled_tests did not actually work for
WinMultiprocess-based tests, because gtest’s test launcher would refuse
to run the child side of the test, believing it was disabled. This is
fixed by always supplying --gtest_also_run_disabled_tests to
WinChildProcess children, on the basis that if the parent is managing to
run and it’s disabled, disabled tests must actually be enabled.
Bug: crashpad:205
Change-Id: Ied22f16b9329ee13b6b07fd29de704f6fe2a058e
Reviewed-on: https://chromium-review.googlesource.com/742462
Reviewed-by: Scott Graham <scottmg@chromium.org>
This upstreams part of
00a0654929.
The gmock_main and gtest_main test launchers detect via a
CRASHPAD_IN_CHROMIUM macro that they are building as part of Chromium,
and use Chromium’s custom test launcher rather than gtest’s
RUN_ALL_TESTS(). This enables parallelism, sharding, and integration
with Swarming.
WinMultiprocess-based tests are not compatible with this test launcher
or with the Swarming test design, and must be disabled when
CRASHPAD_IN_CHROMIUM is set. This is covered by
https://crashpad.chromium.org/bug/205.
CRASHPAD_IN_CHROMIUM is never defined during Crashpad’s own standalone
build, it’s only defined when building in Chromium.
Change-Id: I969c5d376f86ab4b3f4cc85c97d4452b53b35063
Reviewed-on: https://chromium-review.googlesource.com/740988
Reviewed-by: Nico Weber <thakis@chromium.org>
Reviewed-by: Robert Sesek <rsesek@chromium.org>
gtest used to require (expected, actual) ordering for arguments to
EXPECT_EQ and ASSERT_EQ, and in failed test assertions would identify
each side as “expected” or “actual.” Tests in Crashpad adhered to this
traditional ordering. After a gtest change in February 2016, it is now
agnostic with respect to the order of these arguments.
This change mechanically updates all uses of these macros to (actual,
expected) by reversing them. This provides consistency with our use of
the logging CHECK_EQ and DCHECK_EQ macros, and makes for better
readability by ordinary native speakers. The rough (but working!)
conversion tool is
https://chromium-review.googlesource.com/c/466727/1/rewrite_expectassert_eq.py,
and “git cl format” cleaned up its output.
EXPECT_NE and ASSERT_NE never had a preferred ordering. gtest never made
a judgment that one side or the other needed to provide an “unexpected”
value. Consequently, some code used (unexpected, actual) while other
code used (actual, unexpected). For consistency with the new EXPECT_EQ
and ASSERT_EQ usage, as well as consistency with CHECK_NE and DCHECK_NE,
this change also updates these use sites to (actual, unexpected) where
one side can be called “unexpected” as, for example, std::string::npos
can be. Unfortunately, this portion was a manual conversion.
References:
https://github.com/google/googletest/blob/master/googletest/docs/Primer.md#binary-comparison77d6b17338https://github.com/google/googletest/pull/713
Change-Id: I978fef7c94183b8b1ef63f12f5ab4d6693626be3
Reviewed-on: https://chromium-review.googlesource.com/466727
Reviewed-by: Scott Graham <scottmg@chromium.org>
ReadFile() attempted to continue reading after a short read. In most
cases, this is fine. However, ReadFile() would keep trying to fill a
partially-filled buffer until experiencing a 0-length read(), signaling
end-of-file. For certain weird file descriptors like terminal input, EOF
is an ephemeral condition, and attempting to read beyond EOF doesn’t
actually return 0 (EOF) provided that they remain open, it will block
waiting for more input. Consequently, ReadFile() and anything based on
ReadFile() had an undocumented and quirky interface, which was that any
short read that it returned (not an underlying short read) actually
indicated EOF.
This facet of ReadFile() was unexpected, so it’s being removed. The new
behavior is that ReadFile() will return an underlying short read. The
behavior of FileReaderInterface::Read() is updated in accordance with
this change.
Upon experiencing a short read, the caller can determine the best
action. Most callers were already prepared for this behavior. Outside of
util/file, only crashpad_database_util properly implemented EOF
detection according to previous semantics, and adapting it to new
semantics is trivial.
Callers who require an exact-length read can use the new
ReadFileExactly(), or the newly renamed LoggingReadFileExactly() or
CheckedReadFileExactly(). These functions will retry following a short
read. The renamed functions were previously called LoggingReadFile() and
CheckedReadFile(), but those names implied that they were simply
wrapping ReadFile(), which is not the case. They wrapped ReadFile() and
further, insisted on a full read. Since ReadFile()’s semantics are now
changing but these functions’ are not, they’re now even more distinct
from ReadFile(), and must be renamed to avoid confusion.
Test: *
Change-Id: I06b77e0d6ad8719bd2eb67dab93a8740542dd908
Reviewed-on: https://chromium-review.googlesource.com/456676
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Previously, StartHandler() launched the handler process, then connected
over a pipe to register for crash handling. Instead, the initial client
can create and inherit handles to the handler and pass those handle
values and other data (addresses, etc.) on the command line.
This should improve startup time as there's no need to synchronize with
the process at startup, and allows avoiding a call to CreateProcess()
directly in StartHandler(), which is important for registration for
crash reporting from DllMain().
Incidentally adds new utility functions for string/number conversion and
string splitting.
Note: API change; UseHandler() is removed for all platforms.
BUG=chromium:567850,chromium:656800
Change-Id: I1602724183cb107f805f109674c53e95841b24fd
Reviewed-on: https://chromium-review.googlesource.com/400015
Reviewed-by: Mark Mentovai <mark@chromium.org>
This was done in Chromium’s local copy of Crashpad in 562827afb599. This
change is similar to that one, except more care was taken to avoid
including headers from a .cc or _test.cc when already included by the
associated .h. Rather than using <stddef.h> for size_t, Crashpad has
always used <sys/types.h>, so that’s used here as well.
This updates mini_chromium to 8a2363f486e3a0dc562a68884832d06d28d38dcc,
which removes base/basictypes.h.
e128dcf10122 Remove base/move.h; use std::move() instead of Pass()
8a2363f486e3 Move basictypes.h to macros.h
R=avi@chromium.org
Review URL: https://codereview.chromium.org/1566713002 .
Allowing the client to create its own pipe name string caused a race
between client and server. Instead, in this mode, the server now creates
the pipe name along with a pipe, and returns it to its client via a
--handshake-handle. This guarantees that by the time the client gets the
pipe name, the server has already created it.
Ephemeral mode is now implied by --handshake-handle. The --persistent
option is gone. --persistent mode is enabled when using --pipe-name.
BUG=crashpad:69
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1432563003 .
Previously, crashpad_handler made its own receive right, and transferred
a corresponding send right to its client. There are two advantages to
making the receive right in the client:
- It is possible to monitor the receive right for a port-destroyed
notificaiton in the client, allowing the handler to be restarted if
it dies.
- For the future run-from-launchd mode (bug crashpad:25), the handler
will obtain its receive right from the bootstrap server instead of
making its own. Having the handler get its receive right from
different sources allows more code to be shared than if it were to
sometimes get a receive right and sometimes make a receive right and
transfer a send right.
This includes a restructuring in crashpad_client_mac.cc that will make
it easier to give it an option to restart crashpad_handler if it dies.
The handler starting logic should all behave the same as before.
BUG=crashpad:68
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1409073013 .
This allows better code sharing in crashpad_handler’s main(). It doesn’t
look like much of an improvement now, but a separate change will cause
the Mac ExceptionHandlerServer() to be constructed with an argument. It
will be beneficial for Mac and Windows to be able to share the Run()
call.
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1402333004 .
Capture the memory for the loader lock (can be inspected by !cs), as
well as all locks that were created with .DebugInfo which can be viewed
with !locks.
e.g.
0:000> !cs ntdll!LdrpLoaderLock
-----------------------------------------
Critical section = 0x778d6410 (ntdll!LdrpLoaderLock+0x0)
DebugInfo = 0x778d6b6c
NOT LOCKED
LockSemaphore = 0x0
SpinCount = 0x04000000
0:000> !locks -v
CritSec ntdll!RtlpProcessHeapsListLock+0 at 778d7620
LockCount NOT LOCKED
RecursionCount 0
OwningThread 0
EntryCount 0
ContentionCount 0
CritSec +7a0248 at 007a0248
LockCount NOT LOCKED
RecursionCount 0
OwningThread 0
EntryCount 0
ContentionCount 0
CritSec crashy_program!g_critical_section_with_debug_info+0 at 01342c48
LockCount NOT LOCKED
RecursionCount 0
OwningThread 0
EntryCount 0
ContentionCount 0
CritSec crashy_program!crashpad::`anonymous namespace'::g_test_critical_section+0 at 01342be0
WaiterWoken No
LockCount 0
RecursionCount 1
OwningThread 34b8
EntryCount 0
ContentionCount 0
*** Locked
Scanned 4 critical sections
R=mark@chromium.org
BUG=crashpad:52
Review URL: https://codereview.chromium.org/1392093003 .
This replaces the registration server, and adds dispatch to a delegate
on crash requests.
(As you are already aware) we went around in circles on trying to come
up with a slightly-too-fancy threading design. All of them seemed to
have problems when it comes to out of order events, and orderly
shutdown, so I've gone back to something not-too-fancy.
Two named pipe instances (that clients connect to) are created. These
are used only for registration (which should take <1ms), so 2 should be
sufficient to avoid any waits. When a client registers, we duplicate
an event to it, which is used to signal when it wants a dump taken.
The server registers threadpool waits on that event, and also on the
process handle (which will be signalled when the client process exits).
These requests (in particular the taking of the dump) are serviced
on the threadpool, which avoids us needing to manage those threads,
but still allows parallelism in taking dumps. On process termination,
we use an IO Completion Port to post a message back to the main thread
to request cleanup. This complexity is necessary so that we can
unregister the threadpool waits without being on the threadpool, which
we need to do synchronously so that we can be sure that no further
callbacks will execute (and expect to have the client data around
still).
In a followup, I will readd support for DumpWithoutCrashing -- I don't
think it will be too difficult now that we have an orderly way to
clean up client records in the server.
R=cpu@chromium.org, mark@chromium.org, jschuh@chromium.org
BUG=crashpad:1,crashpad:45
Review URL: https://codereview.chromium.org/1301853002 .
