This uses “static” at function scope to avoid making local copies, even
in cases where the compiler can’t see that the local copy is
unnecessary. “constexpr” adds additional safety in that it prevents
global state from being initialized from any runtime dependencies, which
would be undesirable.
At namespace scope, “constexpr” is also used where appropriate.
For the most part, this was a mechanical transformation for things
matching '(^| )const [^=]*\['.
Similar transformations could be applied to non-arrays in some cases,
but there’s limited practical impact in most non-array cases relative to
arrays, there are far more use sites, and much more manual intervention
would be required.
Change-Id: I3513b739ee8b0be026f8285475cddc5f9cc81152
Reviewed-on: https://chromium-review.googlesource.com/583997
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Leonard Mosescu <mosescu@chromium.org>
The "file-limit" annotation will be used to confirm the theory that
certain crashes are caused by systems at or near their file descriptor
table size limits.
The annotation records the system-wide kern.num_files and kern.maxfiles
values, and the process-specific current and maximum file descriptor
limits.
The annotation will be set on crashpad_handler startup, and will be
refreshed every time an exception is handled and every time the upload
thread processes a pending report.
It’s expected that this annotation will be removed after enough data has
been collected to confirm the theory. However, the principle is useful
enough that we may want to provide this feature more generally under
bugs 19 or 21.
Bug: crashpad:180
Change-Id: I3bb78fae60e0567bc4ac2625716e0abe0ddae08c
Reviewed-on: https://chromium-review.googlesource.com/479914
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Self-monitoring revealed this CHECK was being hit in the wild:
base::debug::BreakDebugger() debugger_posix.cc:260
logging::LogMessage::~LogMessage() logging.cc:759
logging::MachLogMessage::~MachLogMessage() mach_logging.cc:45
crashpad::ExceptionHandlerServer::Run() exception_handler_server.cc:108
crashpad::HandlerMain() handler_main.cc:744
The MACH_CHECK() was:
108 MACH_CHECK(mr == MACH_MSG_SUCCESS, mr) << "MachMessageServer::Run";
Crash reports captured the full message, including the value of mr:
[0418/015158.777231:FATAL:exception_handler_server.cc(108)] Check failed: mr == MACH_MSG_SUCCESS. MachMessageServer::Run: (ipc/send) invalid destination port (0x10000003)
0x10000003 = MACH_SEND_INVALID_DEST.
This can happen when attempting to send a Mach message to a dead name.
Send (and send-once) rights become dead names when the corresponding
receive right dies. This would not normally happen for exception
requests originating in the kernel. It can happen for requests
originating from a user task: when the user task dies, the receive right
dies with it. All it takes to trigger this CHECK() in crashpad_handler
is for a Crashpad client to die (or be killed) while the handler is
processing a SimulateCrash() that the client originated.
Accept MACH_SEND_INVALID_DEST as a valid return value for
MachMessageServer::Run().
Note that MachMessageServer’s test coverage was already aware of this
behavior. MachMessageServer::Run()’s documentation is updated to reflect
it too.
Change-Id: I483c065d3c5f9a7da410ef3ad54db45ee53aa3c2
Reviewed-on: https://chromium-review.googlesource.com/479093
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Robert Sesek <rsesek@chromium.org>
76a67a37b1d0 adds crashpad_handler’s --monitor-self argument, which
results in a second crashpad_handler instance running out of the same
database as the initial crashpad_handler instance that it monitors. The
two handlers start at nearly the same time, and will initially be on
precisely the same schedule for periodic tasks such as scanning for new
reports to upload and pruning the database. This is an unnecessary
duplication of effort.
This adds a new --no-periodic-tasks argument to crashpad_handler. When
the first instance of crashpad_handler starts a second to monitor it, it
will use this argument, which prevents the second instance from
performing these tasks.
When --no-periodic-tasks is in effect, crashpad_handler will still be
able to upload crash reports that it knows about by virtue of having
written them itself, but it will not scan the database for other pending
reports to upload.
Bug: crashpad:143
Test: crashpad_util_test ThreadSafeVector.ThreadSafeVector
Change-Id: I7b249dd7b6d5782448d8071855818f986b98ab5a
Reviewed-on: https://chromium-review.googlesource.com/473827
Reviewed-by: Robert Sesek <rsesek@chromium.org>
With multiple crashpad_handlers running out of the same database, it was
possible for more than one to attempt to upload the same report. Nothing
ensured that the reports remained pending between the calls to
CrashReportDatabaseMac::GetPendingReports() and
CrashReportDatabaseMac::GetReportForUploading().
The Windows equivalent did not share this bug, but it would return
kBusyError. kReportNotFound is a better code.
Test: crashpad_client_test CrashReportDatabaseTest.*
Change-Id: Ieaee7f94ca8e6f2606d000bd2ba508d3cfa2fe07
Reviewed-on: https://chromium-review.googlesource.com/473928
Reviewed-by: Robert Sesek <rsesek@chromium.org>
--monitor-self-annotations allows the Crashpad-using application to push
module-level annotations in to crashpad_handler. These annotations will
appear in any crash report written for that handler by --monitor-self.
Bug: crashpad:143
Change-Id: If47395da75a90be4f4bdce0630ce95ea93f9fcf3
Reviewed-on: https://chromium-review.googlesource.com/467746
Reviewed-by: Scott Graham <scottmg@chromium.org>
https://crbug.com/678959 added “fallback” crash reporting for
crashpad_handler on Windows, in a Chrome- and Windows-specific way. This
implements a more general self-monitor mechanism that will work on
multiple platforms and in the absence of Chrome.
When starting crashpad_handler (let’s call it the “first instance”) with
--monitor-self, it will start another crashpad_handler (the “second
instance”). The second instance monitors the first one for crashes. The
second instance will be started in mostly the same way as the first
instance, except --monitor-self will not be provided to the second
instance.
Bug: crashpad:143
Change-Id: I76f3f47d1762d8ecae1814357cb672c8b7bd5e95
Reviewed-on: https://chromium-review.googlesource.com/466267
Reviewed-by: Sigurður Ásgeirsson <siggi@chromium.org>
Reviewed-by: Scott Graham <scottmg@chromium.org>
This supports the “double handler” or “double handler with low
probability” models from https://crashpad.chromium.org/bug/143.
For crashpad_handler to be become its own client, it needs access to its
own executable path to pass to CrashpadClient::StartHandler(). This was
formerly available in the test-only test::Paths::Executable(). Bring
that function’s implementation to the non-test Paths::Executable() in
util/misc, and rename test::Paths to test::TestPaths to avoid future
confusion.
test::TestPaths must still be used to access TestDataRoot(), which does
not make any sense to non-test code.
test::TestPaths::Executable() is retained for use by tests, which most
likely prefer the fatal semantics of that function. Paths::Executable()
is not fatal because for the purposes of implementing the double
handler, a failure to locate the executable path (which may happen on
some systems in deeply-nested directory hierarchies) shouldn’t cause the
initial crashpad_handler to abort, even if it does prevent a second
crashpad_handler from being started.
Bug: crashpad:143
Test: crashpad_util_test Paths.*, crashpad_test_test TestPaths.*
Change-Id: I9f75bf61839ce51e33c9f7c0d7031cebead6a156
Reviewed-on: https://chromium-review.googlesource.com/466346
Reviewed-by: Scott Graham <scottmg@chromium.org>
Commit-Queue: Mark Mentovai <mark@chromium.org>
This is like 270490ff79df, but for things run by end_to_end_test.py, and
things run for it by crash_other_program.exe.
Change-Id: Iabf3c762c50f41eb61ab31f714c646364196e745
Reviewed-on: https://chromium-review.googlesource.com/458822
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Scott Graham <scottmg@chromium.org>
ReadFile() attempted to continue reading after a short read. In most
cases, this is fine. However, ReadFile() would keep trying to fill a
partially-filled buffer until experiencing a 0-length read(), signaling
end-of-file. For certain weird file descriptors like terminal input, EOF
is an ephemeral condition, and attempting to read beyond EOF doesn’t
actually return 0 (EOF) provided that they remain open, it will block
waiting for more input. Consequently, ReadFile() and anything based on
ReadFile() had an undocumented and quirky interface, which was that any
short read that it returned (not an underlying short read) actually
indicated EOF.
This facet of ReadFile() was unexpected, so it’s being removed. The new
behavior is that ReadFile() will return an underlying short read. The
behavior of FileReaderInterface::Read() is updated in accordance with
this change.
Upon experiencing a short read, the caller can determine the best
action. Most callers were already prepared for this behavior. Outside of
util/file, only crashpad_database_util properly implemented EOF
detection according to previous semantics, and adapting it to new
semantics is trivial.
Callers who require an exact-length read can use the new
ReadFileExactly(), or the newly renamed LoggingReadFileExactly() or
CheckedReadFileExactly(). These functions will retry following a short
read. The renamed functions were previously called LoggingReadFile() and
CheckedReadFile(), but those names implied that they were simply
wrapping ReadFile(), which is not the case. They wrapped ReadFile() and
further, insisted on a full read. Since ReadFile()’s semantics are now
changing but these functions’ are not, they’re now even more distinct
from ReadFile(), and must be renamed to avoid confusion.
Test: *
Change-Id: I06b77e0d6ad8719bd2eb67dab93a8740542dd908
Reviewed-on: https://chromium-review.googlesource.com/456676
Reviewed-by: Robert Sesek <rsesek@chromium.org>
BUG=crashpad:165, chromium:696721
Change-Id: I85c6740955fdbdfd7f17208c095a4685e28bfacc
Reviewed-on: https://chromium-review.googlesource.com/448960
Commit-Queue: Sigurður Ásgeirsson <siggi@chromium.org>
Reviewed-by: Mark Mentovai <mark@chromium.org>
Reviewed-by: Scott Graham <scottmg@chromium.org>
Use these utilities for signal handling in crashpad_handler
BUG=crashpad:30
TEST=crashpad_util_test Signals.*
Change-Id: I6c9a1de35c4a81b58d77768c4753bdba5ebea4df
Reviewed-on: https://chromium-review.googlesource.com/446917
Commit-Queue: Mark Mentovai <mark@chromium.org>
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Chromium has many build configurations. One important configuration
that’s not tested by its commit queue doesn’t use |condition| in
DLOG_IF(severity, condition) or any of the D*LOG_IF macros, resulting in
errors such as
…/handler/handler_main.cc:166:7: error: unused variable 'rv' [-Werror,-Wunused-variable]
int rv = sigaction(sig, &sa, nullptr);
^
BUG=chromium:695314
Change-Id: I09a57379e8276b5ffa7f8f81706581a802d76809
Reviewed-on: https://chromium-review.googlesource.com/446559
Reviewed-by: Robert Sesek <rsesek@chromium.org>
It could be useful to put our existing Crashpad.HandlerCrashed metrics
into context by getting a sense of handler starts, clean exits, and
other types of exits.
BUG=crashpad:100
Change-Id: I8982075158ea6d210eb2ddad678302e339a42192
Reviewed-on: https://chromium-review.googlesource.com/444124
Reviewed-by: Scott Graham <scottmg@chromium.org>
This adds zlib to Crashpad. By default in standalone Crashpad builds,
the system zlib will be used where available. A copy of Chromium’s zlib
(currently a slightly patched 1.2.11) is checked out via DEPS into
third_party for use on Windows, which does not have a system zlib.
zlib is used to produce gzip streams for HTTP upload request bodies sent
by crashpad_handler by default. The Content-Encoding: gzip header is set
for these compressed request bodies. Compression can be disabled for
upload to servers without corresponding decompression support by
starting crashpad_handler with the --no-upload-gzip option.
Most minidumps compress quite well with zlib. A size reduction of 90% is
not uncommon.
BUG=crashpad:157
TEST=crashpad_util_test GzipHTTPBodyStream.*:HTTPTransport.*
Change-Id: I99b86db3952c3685cd78f5dc858a60b54399c513
Reviewed-on: https://chromium-review.googlesource.com/438585
Reviewed-by: Robert Sesek <rsesek@chromium.org>
This installs signal handlers in the crashpad_handler process to log
these crashes via the Crashpad.HandlerCrash.ExceptionCode.Mac histogram.
This is roughly the same mechanism that’s used for Windows.
The signal handler tries fairly hard to avoid swallowing signals, so
that things appear to outside observers (including debuggers and crash
handlers) identically to how they would look if no signal handler was
present.
The signal handler uses a different mapping schema than the existing
Crashpad.ExceptionCode.Mac histogram for reasons explained in code
comments. Because the mappings should not overlap, the new values may be
added to the existing CrashpadMacExceptionCodes enum.
BUG=crashpad:100
Change-Id: I9b8bda1c59d0a180501c285cdc672840a54f5efc
Reviewed-on: https://chromium-review.googlesource.com/435451
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Previously, only the top-level exception code was reported via the
Crashpad.ExceptionCode.Mac histogram. Making this histogram work
(https://crbug.com/678720) has revealed that Chrome is triggering
EXC_RESOURCE exceptions at a rate in excess of 4x that of ordinary
crashes. These exceptions were not previously visible because they are
not uploaded unless the system treats them as fatal, which it does not
normally do absent an explicit request.
In order to learn more about the problem, this change augments the data
reported via the Crashpad.ExceptionCode.Mac histogram to report (at
least) second-level exception data. This means that we will no longer
see just EXC_RESOURCE, but potentially more useful information such as
EXC_RESOURCE / RESOURCE_TYPE_IO / FLAVOR_IO_PHYSICAL_WRITES. This also
applies to other exception types, so that the majority of crashes
currently falling into the EXC_CRASH bucket will now have additional
information decoded and will be reported as, for example, EXC_BAD_ACCESS
/ KERN_INVALID_ADDRESS, EXC_BAD_INSTRUCTION / EXC_I386_INVOP, and
EXC_CRASH / SIGABRT.
Because the old mechanism was only live (in an “it works” sense) for
several days, and the new mechanism does not overlap with histogram
values used by the old one, there’s no need to invent a new histogram
name.
BUG=chromium:684051
Change-Id: Ia0a372b4127f7b3b2e7dbbaac9304cce3b5aadfe
Reviewed-on: https://chromium-review.googlesource.com/430933
Reviewed-by: Scott Graham <scottmg@chromium.org>
I haven't been able to reproduce this locally, but we see errors in
crash dumps where the unloaded module list consists of a number of
modules with invalid names and implausible addresses. My assumption is
that RTL_UNLOAD_EVENT_TRACE isn't correct for some OS levels. Instead of
trying to finesse and test that, use RtlGetUnloadEventTraceEx() instead
of RtlGetUnloadEventTrace(), which returns an element size. (This
function is Vista+ which is why it wasn't used the first time around.)
R=mark@chromium.org
BUG=chromium:620175
Change-Id: I4d7080a03623276f9c1c038d6e7329af70e4a64c
Reviewed-on: https://chromium-review.googlesource.com/421564
Reviewed-by: Mark Mentovai <mark@chromium.org>
The strangest discovery relates to the # <h1> title in navbar.md.
Gitiles renders it small unless there’s a [home] reference, so use that.
This should only affect wrapping the site logo in the [home] link, but
it appears to control the size of the navbar title too. See
https://code.google.com/p/gitiles/issues/detail?id=130.
BUG=crashpad:138,gitiles:130
Change-Id: I11b3a79f045efa22358b3c3ef4b50ce2e6b3282e
Reviewed-on: https://chromium-review.googlesource.com/408458
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Most of the world, including the Chromium universe, seems to be
standardizing on Markdown for documentation. Markdown provides the
benefit of automatic rendering on Gitiles (Gerrit), and on GitHub
mirrors as well. Crashpad should fit in with its surroundings.
There are two quirks that I was unable to resolve.
- Markdown does not allow **emphasis** within a ```code fence```
region. In blocks showing interactive examples, the AsciiDoc
documentation used this to highlight what the user was expected to
type.
- Markdown does not have a “definition list” (<dl>). This would have
been nice in man pages for the Options and Exit Status sections.
In its place, I used unnumbered lists. This is a little ugly, but
it’s not the end of the world.
The new Markdown-formatted documentation is largely identical to the
AsciiDoc that it replaces. Minor editorial revisions were made.
References to Mac OS X now mention macOS, and tool man pages describing
tools that that access task ports now mention System Integrity
Protection (SIP).
The AppEngine-based https://crashpad.chromium.org/ app in doc/appengine
is still necessary to serve Doxygen-generated documentation. This app is
updated to redirect existing generated-HTML URLs to Gitiles’ automatic
Markdown rendering.
Scripts in doc/support are updated to adapt to this change. All AsciiDoc
support files in doc/support have been removed.
BUG=crashpad:138
Change-Id: I15ad423d5b7aa1b7aa2ed1d2cb72639eec7c81aa
Reviewed-on: https://chromium-review.googlesource.com/408256
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Reviewed-by: Scott Graham <scottmg@chromium.org>
The Windows 10 loader starts a few extra threads before main(). In a few
of the test cases, the tests were relying on thread ordering (generally,
the test thread being at index #1). Instead, use other signals to find
the correct thread to verify.
R=mark@chromium.org
Change-Id: Icb1f5a8fdf3a0ea6d82ab65960dbcb650965f269
Reviewed-on: https://chromium-review.googlesource.com/407073
Reviewed-by: Mark Mentovai <mark@chromium.org>
Not surprisingly,
"0x278,0x27c,0x280,0x274,0x288,0x978a70,0x978a80,0x978a90" is not a
valid directory to store metrics in.
Fortunately --metrics was processed before --initial-client-data in a
local build, otherwise this could have lurked for a long time. :(
R=mark@chromium.org
BUG=655788,656800
Change-Id: I3ac3d1b487f55ddf0172bac51f8d9efc411c3329
Reviewed-on: https://chromium-review.googlesource.com/406938
Reviewed-by: Mark Mentovai <mark@chromium.org>
Previously, StartHandler() launched the handler process, then connected
over a pipe to register for crash handling. Instead, the initial client
can create and inherit handles to the handler and pass those handle
values and other data (addresses, etc.) on the command line.
This should improve startup time as there's no need to synchronize with
the process at startup, and allows avoiding a call to CreateProcess()
directly in StartHandler(), which is important for registration for
crash reporting from DllMain().
Incidentally adds new utility functions for string/number conversion and
string splitting.
Note: API change; UseHandler() is removed for all platforms.
BUG=chromium:567850,chromium:656800
Change-Id: I1602724183cb107f805f109674c53e95841b24fd
Reviewed-on: https://chromium-review.googlesource.com/400015
Reviewed-by: Mark Mentovai <mark@chromium.org>
Three new metrics:
- counting upload success/failure;
- enum tracking the reason upload was skipped;
- enum describing how an upload got to the pending state.
R=mark@chromium.org, asvitkine@chromium.org
BUG=crashpad:100
Change-Id: I5e0cbc1ac3424e974f3a51560e5cdad484ffc038
Reviewed-on: https://chromium-review.googlesource.com/388855
Reviewed-by: Mark Mentovai <mark@chromium.org>
Includes mini_chromium DEPS roll for:
88e0a3e Add stub of sparse_histogram.h
R=mark@chromium.org
BUG=crashpad:100
Change-Id: I4c541a33be0f7f47e972af638d4765bd06682acf
Reviewed-on: https://chromium-review.googlesource.com/386385
Reviewed-by: Mark Mentovai <mark@chromium.org>
In order to allow on-demand uploads for crash reports, adding a
upload_explicitly_requested bit on 'pending' state and necessary support
for it.
BUG=chromium:620762
Change-Id: Ida38e483fe8d0e48eb5cbe95e8b8bfd96a2f8f00
Reviewed-on: https://chromium-review.googlesource.com/367328
Reviewed-by: Mark Mentovai <mark@chromium.org>
Reviewed-by: Robert Sesek <rsesek@chromium.org>
This switches the default behaviour of crashpad_handler.exe to be a
/subsystem:windows app, so that normal usage won't cause a console to be
popped up. At the same time, creates a copy of crashpad_handler.exe in
the output dir named crashpad_handler.com. The .com doesn't affect
normal operation, as the way StartHandler() uses CreateProcess()
requires a real path to a file. However, when run from a command prompt,
.com are found before .exe, so editbin the .com to be to a console app,
which will be run in preference to the exe when run as just
"crashpad_handler", as one tends to do from a command prompt when
debugging. That is:
d:\src\crashpad\crashpad\out\Debug>where crashpad_handler
d:\src\crashpad\crashpad\out\Debug\crashpad_handler.com
d:\src\crashpad\crashpad\out\Debug\crashpad_handler.exe
d:\src\crashpad\crashpad\out\Debug>crashpad_handler --help
Usage: crashpad_handler [OPTION]...
...
d:\src\crashpad\crashpad\out\Debug>crashpad_handler.exe --help
<no output>
d:\src\crashpad\crashpad\out\Debug>crashpad_handler.com --help
Usage: crashpad_handler.com [OPTION]...
...
We also use the .com file in test invocations so that output streams
will be visible.
R=mark@chromium.org
Change-Id: I1a27f88472d491b2a1d76e63c45e6415d9f679c0
Reviewed-on: https://chromium-review.googlesource.com/371578
Reviewed-by: Mark Mentovai <mark@chromium.org>
Because DumpAndCrashTargetProcess() suspends the process, the thread
suspend count is one too high for all threads other than the injection
one in the thread snapshots. Compensate for this when we detect this
type of exception.
BUG=crashpad:103
Change-Id: Ib77112fddf5324fc0e43f598604e56f77d67ff54
Reviewed-on: https://chromium-review.googlesource.com/340372
Reviewed-by: Mark Mentovai <mark@chromium.org>
Adds a new client API which allows causing an exception in another
process. This is accomplished by injecting a thread that calls
RaiseException(). A special exception code is used that indicates to the
handler that the exception arguments contain a thread id and exception
code, which are in turn used to fabricate an exception record. This is
so that the API can allow the client to "blame" a particular thread in
the target process.
The target process must also be a registered Crashpad client, as the
normal exception mechanism is used to handle the exception.
The injection of a thread is used instead of DebugBreakProcess() which
does not cause the UnhandledExceptionFilter() to be executed.
NtCreateThreadEx() is used in lieu of CreateRemoteThread() as it allows
passing of a flag which avoids calling DllMain()s. This is necessary to
allow thread creation to succeed even when the target process is
deadlocked on the loader lock.
BUG=crashpad:103
Change-Id: I797007bd2b1e3416afe3f37a6566c0cdb259b106
Reviewed-on: https://chromium-review.googlesource.com/339263
Reviewed-by: Mark Mentovai <mark@chromium.org>
Add a user-configurable cap on the amount of memory that is gathered by
dereferencing thread stacks. (SyzyAsan stores a tremendously large
number of pointers on the stack, so the dumps were ending up in the ~25M
range.)
Also reduce the range around pointers somewhat.
Change-Id: I6bce57d86bd2f6a796e1580c530909e089ec00ed
Reviewed-on: https://chromium-review.googlesource.com/338463
Reviewed-by: Mark Mentovai <mark@chromium.org>
This augments the standalone and in-Chromium models with an external
model, in which the dependencies and Crashpad are checked out as
siblings in the same directory, organized according to this structure:
root/crashpad[/README]
root/gmock[/include/gmock/gmock.h]
root/gtest[/include/gtest/gtest.h]
root/gyp[/pylib/gyp]
root/mini_chromium[/build/common.gypi]
This is the directory structure used in google3.
Change-Id: Ie300ead7cd085265933e4ed891509ce050e995e2
Reviewed-on: https://chromium-review.googlesource.com/324230
Reviewed-by: Robert Sesek <rsesek@chromium.org>
Reviewed-by: Scott Graham <scottmg@chromium.org>
The previous approach was nice for its simplicity, but unfortunately
didn't work when the compiler decided to do some of its confounded
"optimization".
R=mark@chromium.org
BUG=crashpad:86, chromium:571144
Review URL: https://codereview.chromium.org/1563273004 .
This is a temporary measure to try to account for lower than expected
upload volume from Chrome in the wild. So this doesn't fix bug 23, but
is related. The ability to delimit the upload rate is useful when
testing locally too.
R=mark@chromium.org
BUG=crashpad:23
Review URL: https://codereview.chromium.org/1563683002 .
This was done in Chromium’s local copy of Crashpad in 562827afb599. This
change is similar to that one, except more care was taken to avoid
including headers from a .cc or _test.cc when already included by the
associated .h. Rather than using <stddef.h> for size_t, Crashpad has
always used <sys/types.h>, so that’s used here as well.
This updates mini_chromium to 8a2363f486e3a0dc562a68884832d06d28d38dcc,
which removes base/basictypes.h.
e128dcf10122 Remove base/move.h; use std::move() instead of Pass()
8a2363f486e3 Move basictypes.h to macros.h
R=avi@chromium.org
Review URL: https://codereview.chromium.org/1566713002 .
../../handler/crash_report_upload_thread.cc:142:7: error: field 'database_' will be initialized after field 'thread_' [-Werror,-Wreorder]
database_(database),
^
1 error generated.
And:
..\util\thread\worker_thread_test.cc(25) : warning C4244: 'initializing' : conversion from 'double' to 'const uint64_t', possible loss of data
BUG=crashpad:22
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1556043005 .
This more-natural spelling doesn’t require Crashpad developers to have
to remember anything special when writing code in Crashpad. It’s easier
to grep for and it’s easier to remove the “compat” part when pre-C++11
libraries are no longer relevant.
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1513573005 .
Previously, there was a window after starting the upload thread but
before the SIGTERM handler was installed, where receipt of SIGTERM
could have interrupted an in-progress upload. There was also the
possibility that a second SIGTERM sent after the exception handler
stopped running would interrupt an in-progress upload. By pulling the
signal handler out of ExceptionHandlerServer and into the main
function, these races are avoided.
BUG=crashpad:25
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1429353002 .
I've heard/lived enough horror stories about AV, outbound-blocking
firewalls, etc. on Windows, that I think the best approach is to have
chrome.exe embed the majority of crashpad_handler and jump to it as
early as possible when running in that mode.
So, move most of crashpad_handler into a static_library with just main()
in the executable target.
R=mark@chromium.org
BUG=chromium:546288, crashpad:27
Review URL: https://codereview.chromium.org/1416873016 .
This consolidates all of the twisted casts and comments that discuss how
HANDLEs are really only 32 bits wide even in 64-bit processes on 64-bit
operating systems into a single location.
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1422503015 .
Allowing the client to create its own pipe name string caused a race
between client and server. Instead, in this mode, the server now creates
the pipe name along with a pipe, and returns it to its client via a
--handshake-handle. This guarantees that by the time the client gets the
pipe name, the server has already created it.
Ephemeral mode is now implied by --handshake-handle. The --persistent
option is gone. --persistent mode is enabled when using --pipe-name.
BUG=crashpad:69
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1432563003 .
By invoking crashpad_handler with --mach-service instead of
--handshake-fd, the handler will run as a well-behaved launchd job. The
launchd job may be as a launch agent or launch daemon, or be submitted
to launchd by on_demand_service_tool.
BUG=crashpad:25
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1414533006 .
I considered writing the CodeView records to the minidump, but I didn't
find a ton of docs and debugging is only lightly supported (e.g.
http://www.debuginfo.com/articles/gendebuginfo.html#debuggersandformats
and it doesn't attempt to load at all on more recent Visual Studios).
As we won't be generating symbols in this format, and we don't expect to
have symbols for any weird modules that get injected into us in the
wild, it seems like we don't lose anything by just ignoring them.
R=mark@chromium.org
BUG=crashpad:47
Review URL: https://codereview.chromium.org/1430773003 .
Each routine in this implementation returns MIG_BAD_ID. These routines
may be overridden.
Most things that implement NotifyServer::Interface will only need to
implement one of the interface routines. Since another user of
NotifyServer will be added soon, it makes sense to provide a default
no-op implementation rather than forcing everyone to write the same
no-op boilerplate repeatedly.
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1414413006 .
Previously, crashpad_handler made its own receive right, and transferred
a corresponding send right to its client. There are two advantages to
making the receive right in the client:
- It is possible to monitor the receive right for a port-destroyed
notificaiton in the client, allowing the handler to be restarted if
it dies.
- For the future run-from-launchd mode (bug crashpad:25), the handler
will obtain its receive right from the bootstrap server instead of
making its own. Having the handler get its receive right from
different sources allows more code to be shared than if it were to
sometimes get a receive right and sometimes make a receive right and
transfer a send right.
This includes a restructuring in crashpad_client_mac.cc that will make
it easier to give it an option to restart crashpad_handler if it dies.
The handler starting logic should all behave the same as before.
BUG=crashpad:68
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1409073013 .
This allows better code sharing in crashpad_handler’s main(). It doesn’t
look like much of an improvement now, but a separate change will cause
the Mac ExceptionHandlerServer() to be constructed with an argument. It
will be beneficial for Mac and Windows to be able to share the Run()
call.
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1402333004 .
The intended use is to flip the client-server relationship in
CrashpadClient so that the initial client (parent process) furnishes the
handler process with a receive right. The parent can optionally receive
a port-destroyed notification allowing it to restart the handler if it
exits prematurely.
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1408473002 .
In https://codereview.chromium.org/1411523006, the Mach port scopers are
becoming better ScopedGenerics and are losing the type conversion
operators in the process. This is needed to adapt to that change. get()
is ugly, but being explicit about conversion isn’t a bad thing, and
these scopers will gain functionality such as Pass() as part of the
switch.
As a bonus, some would-be uses of get() to check for valid port rights
are becoming a more descriptive is_valid().
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1405273002 .
I thought I had confirmed that this still allocated and ignored the flag
on older OSs, but I must have not had the PLOG active yet? I'm not sure
what I did. (I might try to blame VMware as it has an annoying habit of
caching old binaries when you use it's "Shared Folders" feature to point
at the dev machine's build dir.)
I confirmed that it does work on Win8 and Win10 but doesn't on Win XP
and Win 7.
R=mark@chromium.org
BUG=crashpad:52
Review URL: https://codereview.chromium.org/1405243002 .
Capture the memory for the loader lock (can be inspected by !cs), as
well as all locks that were created with .DebugInfo which can be viewed
with !locks.
e.g.
0:000> !cs ntdll!LdrpLoaderLock
-----------------------------------------
Critical section = 0x778d6410 (ntdll!LdrpLoaderLock+0x0)
DebugInfo = 0x778d6b6c
NOT LOCKED
LockSemaphore = 0x0
SpinCount = 0x04000000
0:000> !locks -v
CritSec ntdll!RtlpProcessHeapsListLock+0 at 778d7620
LockCount NOT LOCKED
RecursionCount 0
OwningThread 0
EntryCount 0
ContentionCount 0
CritSec +7a0248 at 007a0248
LockCount NOT LOCKED
RecursionCount 0
OwningThread 0
EntryCount 0
ContentionCount 0
CritSec crashy_program!g_critical_section_with_debug_info+0 at 01342c48
LockCount NOT LOCKED
RecursionCount 0
OwningThread 0
EntryCount 0
ContentionCount 0
CritSec crashy_program!crashpad::`anonymous namespace'::g_test_critical_section+0 at 01342be0
WaiterWoken No
LockCount 0
RecursionCount 1
OwningThread 34b8
EntryCount 0
ContentionCount 0
*** Locked
Scanned 4 critical sections
R=mark@chromium.org
BUG=crashpad:52
Review URL: https://codereview.chromium.org/1392093003 .
I’ve accidentally created Crashpad databases when running
crashpad_database_util by mistyping the argument to --database. Typical
users of crashpad_database_util probably don’t want the database to be
created.
This adds a new --create option to crashpad_database_util that is
required to get it to create a database. If not present, a database will
not be created if it does not already exist.
TEST=crashpad_client_test CrashReportDatabaseTest.*
R=rsesek@chromium.org, scottmg@chromium.org
Review URL: https://codereview.chromium.org/1395653002 .
This is a weird option that causes crashpad_handler to discard the crash
handler it inherited and replace it with the system default. Its use is
not recommended.
BUG=chromium:538373
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1391463002 .
launchd actually does set the EXC_RESOURCE and EXC_GUARD handlers
exactly the same way that it sets the EXC_CRASH handler. See 10.9.5
launchd-842.92.1/src/core.c job_setup_exception_port().
Cases where an EXC_CRASH handler is set but EXC_RESOURCE and EXC_GUARD
handlers are not set occur when the exception ports are set by
/usr/bin/login instead of launchd. login looks up the
exception-reporting service by name and sets the exception port without
including EXC_MASK_RESOURCE or EXC_MASK_GUARD in the mask. See 10.10.5
system_cmds-643.30.1/login.tproj/login.c main().
login is a setuid executable, so it does not inherit its parent process’
exception handlers. See 10.10.5 xnu-2782.40.9/osfmk/kern/ipc_tt.c
ipc_task_reset().
Terminal.app executes login when establishing its command-line
environment, so the exception handlers set for Terminal.app itself
(including EXC_MASK_CRASH, EXC_MASK_RESOURCE, and EXC_MASK_GUARD) are
discarded, and then login sets an exception handler only for
EXC_MASK_CRASH. The same thing occurs for any other process descended
from login, including SSH sessions, because sshd executes login.
This is a bug in login filed as Apple radar 22978644. This bug led to a
misunderstanding about the use of EXC_RESOURCE and EXC_GUARD. Comments
that discuss this behavior are now reworded to be accurate, and
non-fatal EXC_RESOURCE exceptions are made eligible for forwarding to
the user ReportCrash (because it would normally handle them in the
absence of Crashpad) while Crashpad itself will still skip processing
them.
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1391453002 .
Chrome’s relauncher process needs a way to sever ties with the
crashpad_handler instance running from the disk image in order to cause
that instance to exit so that the disk image may be unmounted. This new
function is otherwise not thought to be interesting, and its use is not
recommended.
This comes with a small refactoring to create a
SystemCrashReporterHandler() function, and a fix for a minor port leak
in CrashReportExceptionHandler::CatchMachException().
BUG=chromium:538373
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1375573005 .
CrashReportExceptionHandler::CatchMachException() must always set a
valid new_state. Failing to do so appears to trigger corpse generation
on OS X 10.11. This is addressed by calling ExcServerCopyState().
Previously, this was not done for exceptions forwarded to the user
ReportCrash, under the apparent mistaken assumption that ReportCrash
would do it. However, ReportCrash is given copies of out-parameters like
new_state to explicitly prevent it from influencing Crashpad’s returned
state.
ExcServerSuccessfulReturnValue() must not return MACH_RCV_PORT_DIED for
an EXC_CRASH handler on OS X 10.11. This appears to trigger corpse
generation. This is addressed by always returning KERN_SUCCESS from
EXC_CRASH handlers on OS X 10.11.
This also adds generic EXC_CORPSE_NOTIFY support throughout Crashpad.
The crashpad_handler does not listen for this exception type, but it is
now possible to work with this exception type using tools like
exception_port_tool and catch_exception_tool.
BUG=crashpad:48
TEST=Crashes handled by crashpad_handler do not result in the generation
of reports in the root /Library/Logs/DiagnosticReports.
R=kerrnel@chromium.org, rsesek@chromium.org
Review URL: https://codereview.chromium.org/1305893010 .
This replaces the registration server, and adds dispatch to a delegate
on crash requests.
(As you are already aware) we went around in circles on trying to come
up with a slightly-too-fancy threading design. All of them seemed to
have problems when it comes to out of order events, and orderly
shutdown, so I've gone back to something not-too-fancy.
Two named pipe instances (that clients connect to) are created. These
are used only for registration (which should take <1ms), so 2 should be
sufficient to avoid any waits. When a client registers, we duplicate
an event to it, which is used to signal when it wants a dump taken.
The server registers threadpool waits on that event, and also on the
process handle (which will be signalled when the client process exits).
These requests (in particular the taking of the dump) are serviced
on the threadpool, which avoids us needing to manage those threads,
but still allows parallelism in taking dumps. On process termination,
we use an IO Completion Port to post a message back to the main thread
to request cleanup. This complexity is necessary so that we can
unregister the threadpool waits without being on the threadpool, which
we need to do synchronously so that we can be sure that no further
callbacks will execute (and expect to have the client data around
still).
In a followup, I will readd support for DumpWithoutCrashing -- I don't
think it will be too difficult now that we have an orderly way to
clean up client records in the server.
R=cpu@chromium.org, mark@chromium.org, jschuh@chromium.org
BUG=crashpad:1,crashpad:45
Review URL: https://codereview.chromium.org/1301853002 .
Chromium builds with a newer clang than the Crashpad buildbot, and it
reports:
../../../handler/crash_report_upload_thread.cc:148:16: error: 'ThreadMain' overrides a member function but is not marked 'override' [-Werror,-Winconsistent-missing-override]
virtual void ThreadMain() {
^
../../../util/thread/thread.h:46:16: note: overridden virtual function is here
virtual void ThreadMain() = 0;
^
1 error generated.
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1302833002 .
The main goal was to get the beginnings of module iteration and retrieval
of CrashpadInfo in snapshot. The main change for that is to move
crashpad_info_client_options[_test] down out of mac/.
This also requires adding some of the supporting code of snapshot in
ProcessReaderWin, ProcessSnapshotWin, and ModuleSnapshotWin. These are
partially copied from Mac or stubbed out with lots of TODO annotations.
This is a bit unfortunate, but seemed like the most productive way to
make progress incrementally. That is, it's mostly placeholder at the
moment, but hopefully has the right shape for things to come.
R=mark@chromium.org
BUG=crashpad:1
Review URL: https://codereview.chromium.org/1052813002
This adds IsExceptionNonfatalResource() and its test, and uses it in
crashpad_handler. When non-fatal resource exceptions are encountered, no
crash report is generated. crashpad_handler swallows these exceptions.
Alternatively, it could allow them to be sent to the system’s host-level
resource exception handler, normally com.apple.ReportCrash.root, which
would allow them to be processed in the same way as when Crashpad is not
in use. I’m not sure which option is better. I chose to swallow them
because there doesn’t appear to be much value in letting
com.apple.ReportCrash.root and spindump look at them.
This also moves ExcCrashRecoverOriginalException() to the new file as a
sibling of IsExceptionNonfatalResource(). This provides better
organization.
BUG=crashpad:35, chromium:474163, chromium:474326
TEST=crashpad_util_test ExceptionTypes.IsExceptionNonfatalResource
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1066243002
These two exception types use all 64 bits of the code[0] field. The
ExceptionSnapshot was unprepared to stuff this into a 32-bit field. To
resolve the discrepancy, the more-significant data is taken from the
high 32 bits of code[0]. No information is lost because the full code[0]
is made available as part of the Codes() vector.
BUG=crashpad:34
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1050313003
The wiki existed at https://code.google.com/p/crashpad/wiki, but given
Google Code Project Hosting’s impending shutdown[1], it’s prudent to
move wiki documents into the source code repository.
This change moves the existing contents of doc into doc/support, to make
way for documentation in doc. The two existing wiki pages, ProjectStatus
and DevelopingCrashpad, are converted to AsciiDoc format (a fairly
straightforward conversion) and checked in to doc. generate_asciidoc.sh
is updated to produce HTML output from these files. The generated HTML
will show up at http://docs.crashpad.googlecode.com/git/doc/. Note that
generated HTML is still hosted on Google Code Project Hosting, but it’ll
be easy to find a new home for them.
[1]
http://google-opensource.blogspot.com/2015/03/farewell-to-google-code.htmlR=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1055523002
ExcServerCopyState() properly sets the new_state and new_state_count
out-parameters for exception handler routines that may deal with
state-carrying exceptions.
This used to exist inline in catch_exception_tool, but that
implementation had a bug caught by the new test.
TEST=crashpad_util_test ExcServerVariants.ExcServerCopyState and others
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1049023003
Add MapInsertOrReplace<>() to insert a key-value pair into a map if the
key is not already present, or replace the existing value for key if the
key is present. The original value can optionally be returned to the
caller in this case.
Map insertions now use either MapInsertOrReplace<>() or
std::map<>::insert() directly.
Use MapInsertOrReplace<>() when the map should be updated to contain a
mapping from a key to a value regardless of whether the key is already
present.
Use std::map<>::insert() to insert a mapping from a key to a value
without replacing any existing mapping from a key, if present. If it is
important to know whether an existing mapping from a key was present,
use the returned std::pair<>.second. If it is important to know the
existing value, use the returned std::pair<>.first->second.
This change has a slight positive impact on performance.
TEST=crashpad_util_test MapInsert.MapInsertOrReplace and others
BUG=
R=scottmg@chromium.org
Review URL: https://codereview.chromium.org/1044273002
configuration.
When depending on shared libraries such as libbase.dylib,
crashpad_handler must have an LC_RPATH pointing to the
out/{Debug,Release} directory relative to its home deep within
Chromium.app.
BUG=chromium:466964
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1009633002
Now that Chrome’s about:crashes displays the crash report UUID, I wanted
to add it to the minidump. In the future, we may be able to index these
on the server. This will also help identify dumps that correspond to the
same event once we’re equipped to convert between different formats.
Ideally, this new field is populated with the same UUID used locally in
the crash report database. To make this work,
CrashReportDatabase::NewReport must carry the UUID. This was actually
part of CrashReportDatabaseWin’s private extension to NewReport, so that
extension subclass can now be cleaned up.
TEST=crashpad_minidump_test MinidumpCrashpadInfoWriter.*,
crashpad_client_test CrashReportDatabaseTest.NewCrashReport
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1000263003
This makes it easier for clients to start the Crashpad handler, instead
of requiring them to know how to construct arguments for the handler
themselves. Note in the TEST that -a is no longer required.
TEST=run_with_crashpad --handler crashpad_handler \
--database=/tmp/crashpad_db \
--url=https://clients2.google.com/cr/staging_report \
--annotation=prod=crashpad \
--annotation=ver=0.7.0 \
crashy_program
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1001993002
origin.
This adds AuditPIDFromMachMessageTrailer() to get the process ID of a
Mach message’s sender. Exception messages are considered suspicious when
not sent by the kernel or the exception process.
TEST=crashpad_util_test
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/1001943002
The client ID is added to a new field, MinidumpCrashpadInfo::client_id,
in each minidump file that is written. The ProcessSnapshot::ClientID()
gives access to value at the snapshot level. In the upload thread,
client IDs are retrieved from minidump files and used to populate the
“guid” HTTP form parameter.
The Breakpad client supplies these values at upload without hyphens and
with all capital letters. Currently, the Crashpad client uses hyphens
and lowercase letters when communicating with a Breakpad server.
TEST=crashpad_minidump_test MinidumpCrashpadInfoWriter.*,
crashpad_snapshot_test ProcessSnapshotMinidump.*,
run_with_crashpad --handler crashpad_handler \
-a --database=/tmp/crashpad_db \
-a --url=https://clients2.google.com/cr/staging_report \
-a --annotation=prod=crashpad \
-a --annotation=ver=0.7.0 \
crashy_program
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/998033002
disabled.
ClientInfo::set_system_crash_reporter_forwarding() can be used to
disable forwarding. The first module that is found with a non-default
value in this field will dictate whether forwarding is enabled or
disabled. It is possible to enable or disable reporting with this call,
as well as reset it to default, which will allow later modules a chance
to influence the behavior.
ClientInfo::set_crashpad_handler_behavior() is also provided, which can
be used to disable Crashpad’s handling of the exception. Most users
should not call this, but should use Settings::SetUploadsEnabled()
instead.
TEST=crashpad_snapshot_test \
CrashpadInfoClientOptions.*:MachOImageReader.Self_DyldImages; \
run_with_crashpad --handler crashpad_handler \
-a --database=/tmp/crashpad_db \
-a --url=https://clients2.google.com/cr/staging_report \
-a --annotation=prod=crashpad \
-a --annotation=ver=0.7.0 \
crashy_program
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/997713002
upload attempts to no more than 1 per hour.
The rate limiting is simplistic but duplicates the existing Breakpad
client’s behavior, and is suitable for the time being.
TEST=run_with_crashpad --handler crashpad_handler \
-a --database=/tmp/crashpad_db \
-a --url=https://clients2.google.com/cr/staging_report \
-a --annotation=prod=crashpad \
-a --annotation=ver=0.7.0 \
crashy_program
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/992303002
When building in the Chromium tree, this swaps out Crashpad’s copies of
mini_chromium, gtest, and gmock for the equivalents provided by
Chromium. A GYP variable, crashpad_in_chromium, is used to determine the
behavior.
gclient doesn’t sync sub-DEPS, so when doing an in-Chromium build,
Crashpad’s copies of mini_chromium, gtest, and gmock are not available.
BUG=crashpad:12
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/986033002
In Chromium, many targets are built, sharing a single output directory.
Collisions are likely. When integrating Crashpad into Chromium, the
ui/snapshot library and Crashpad’s snapshot library were found to
conflict.
This change gives most Crashpad targets a “crashpad_” prefix to avoid
conflicts. All library and test targets are given a target_name with
this prefix. Existing tools are not likely to conflict with anything
else and are not given a prefix.
BUG=crashpad:12
R=rsesek@chromium.org, scottmg@chromium.org
Review URL: https://codereview.chromium.org/990553003
When building in the Chromium tree, chromium_code is necessary to apply
Chromium’s build/filename_rules.gypi. Crashpad’s build depends on these
rules. chromium_code also enables a high warning level, which is
desirable for Crashpad.
BUG=crashpad:12
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/986873002
A couple of the problems related to not having a C++11 library:
- You can’t put const elements into a std::vector<>, so
CrashReportDatabase::GetPendingReports() and
CrashReportDatabase::GetCompletedReports() need to change. There was
no data-safety benefit to const elements.
- std::string::pop_back() does not exist, another mechanism must be
used to trim strings in BreakpadHTTPFormParametersFromMinidump().
One relates to a feature that does not exist in 10.6:
- The O_CLOEXEC flag to open() was introduced in 10.7. Although it
would be possible to use fcntl(..., F_SETFD, FD_CLOEXEC) on 10.6, the
O_CLOEXEC behavior is just removed from
CrashReportDatabaseMac::ObtainReportLock(), in line with other open()
calls in Crashpad.
And one was a real bug:
- #define __STDC_FORMAT_MACROS before #including <inttypes.h> to get
format macros like SCNx32, used in UUID::InitializeFromString().
TEST=* (gyp_crashpad.py -Dmac_sdk=10.6 -Dmac_deployment_target=10.6)
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/987693004
The handler is now capable of uploading crash reports from the database.
At present, only one upload attempt is made, and the report will be
moved to “completed” in the database after the attempt, regardless of
whether it succeeded or failed.
The handler also has support to push annotations from its command line
into the process annotations map of each crash report it writes. This is
intended to set basic information about each crash report, such as the
product ID and version. Each potentially crashy process can’t be relied
on to maintain this information on their own.
With this change, Crashpad is now 100% capable of running a handler that
maintains a database and uploads crash reports to a Breakpad-type server
such that Breakpad properly interprets the reports. This is all possible
from the command line.
TEST=run_with_crashpad --handler crashpad_handler \
-a --database=/tmp/crashpad_db \
-a --url=https://clients2.google.com/cr/staging_report \
-a --annotation=prod=crashpad \
-a --annotation=ver=0.6.0 \
crashy_program
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/982613002
Upload isn’t actually hooked up yet, but this establishes the upload
thread and provides all of the plumbing to process pending reports. For
the time being, SkipReportUpload() is called for all pending reports.
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/918743002
crashpad_handler is Crashpad’s exception handler server.
Currently, it runs a loop to receive exceptions, and exits when it no
longer has any clients. In the future, this will be extended to write
and potentially upload dumps.
The handler is expected to be started by its initial client via the
CrashpadClient interface.
R=rsesek@chromium.org
Review URL: https://codereview.chromium.org/789693005
