* vulkan: scalar flash attention implementation
* vulkan: always use fp32 for scalar flash attention
* vulkan: use vector loads in scalar flash attention shader
* vulkan: remove PV matrix, helps with register usage
* vulkan: reduce register usage in scalar FA, but perf may be slightly worse
* vulkan: load each Q value once. optimize O reduction. more tuning
* vulkan: support q4_0/q8_0 KV in scalar FA
* CI: increase timeout to accommodate newly-supported tests
* vulkan: for scalar FA, select between 1 and 8 rows
* vulkan: avoid using Float16 capability in scalar FA
* sycl : Implemented reorder Q4_0 mmvq
Signed-off-by: Alberto Cabrera <alberto.cabrera@codeplay.com>
* sycl : Fixed mmvq being called when reorder is disabled
* sycl : Improved comments in the quants header
Signed-off-by: Alberto Cabrera <alberto.cabrera@codeplay.com>
* Use static_assert
* safe_div -> ceil_div
* Clarify qi comment
* change the reorder tensor from init to execute OP
* dbg
* Undo changes to test-backend-ops
* Refactor changes on top of q4_0 reorder fix
* Missing Reverts
* Refactored opt_for_reorder logic to simplify code path
* Explicit inlining and unroll
* Renamed mul_mat_algo enum for consistency
---------
Signed-off-by: Alberto Cabrera <alberto.cabrera@codeplay.com>
Co-authored-by: romain.biessy <romain.biessy@codeplay.com>
This assert fired running Qwen_Qwen3-30B-A3B-Q2_K.gguf:
GGML_ASSERT(nei0 * nei1 <= 3072);
The tensor is 8 x 512. Increase this array size to accommodate.
* ggml : remove MSVC warnings pragmas
This commit removes the MSVC-specific pragmas as these are now handled
in ggml/CMakeLists.txt.
* whisper : remove MSVC warning pragmas
This commit removes the MSVC-specific pragmas. These are now handled in
the ggml/CMakeLists.txt file.
This patch upstreams llamafile's cpu matrix multiplication kernels for ppc64le using MMA builtins for BF16 data type.
This change results in 9x - 40x gains
in total speed S t/s (ie all tokens/total time), across various batch sizes tested using llama-batched-bench benchmark.
The patch is tested with Meta-Lllama-3-8B,
and Mistral-7B models (BF16 models generated by using llama-quantize from corresponding FP32 models) on an IBM POWER10 machine.
Signed-off-by: Shalini Salomi Bodapati <Shalini.Salomi.Bodapati@ibm.com>
The following scenario will cause an assertion failure in the graph
allocator:
- Build and allocate a graph containing a tensor with a non-NULL data
pointer
- Build and allocate a new graph where that data is NULL
Result:
ggml-alloc.c:819: GGML_ASSERT(talloc->buffer_id >= 0) failed
This happens during revalidation because we think that memory should
have been previously allocated based on the current graph but in
reality the previous graph was different. In this situation, we
should do a full reallocation pass.
* vulkan: Add bfloat16 support
This adds bfloat16 matrix multiply support based on VK_KHR_shader_bfloat16.
The extension is required for coopmat multiply support, but matrix-vector
multiply trivially promotes bf16 to fp32 and doesn't require the extension.
The copy/get_rows shaders also don't require the extension.
It's probably possible to fall back to non-coopmat and promote to fp32 when
the extension isn't supported, but this change doesn't do that.
The coopmat support also requires a glslc that supports the extension, which
currently requires a custom build.
* vulkan: Support bf16 tensors without the bf16 extension or coopmat support
Compile a variant of the scalar mul_mm shader that will promote the bf16
values to float, and use that when either the bf16 extension or the coopmat
extensions aren't available.
* vulkan: bfloat16 fixes (really works without bfloat16 support now)
* vulkan: fix spirv-val failure and reenable -O
This commit adds a check to makes sure that the target exists before
trying to add compile options to ignore warnings when using MSVC.
The motivation for this is currently the build is broken depending on
the cmake options provided. With this fix it should be possible to build
even if the targets are not actually available.
Refs: https://github.com/ggml-org/whisper.cpp/pull/3090#issuecomment-2842760104
* whisper: suppress Windows compiler warnings
This commit disables compiler warnings on window using MSVC.
The motivation for these changes is that some compilers generate
warnings for these conversion, for example Windows MSVC, and
there are quite a few of them. This makes it a little difficult to
spot new warnings that may be introduced and also can be difficult
for users/embedders of ggml where these warnings are hard to separate
from their own warnings.
* squash! whisper: suppress Windows compiler warnings
Move ggml related warnings into ggml. This commit also fixes the
indentation and adds a missing whitespace to the if statement.
Build fails with compilation error on power pc.
This patch fixes the same.
Tested with unit tests run via
--build <build_dir> && cd <build_dir> && make test
Signed-off-by: Shalini Salomi Bodapati <Shalini.Salomi.Bodapati@ibm.com>
* fix(rpc): Improve input validation and error handling
The `rpc-server` was vulnerable to Denial of Service attacks via
several RPC commands (`SET_TENSOR`, `GRAPH_COMPUTE`, etc.). Malformed
messages could trigger failed assertions (e.g., invalid `ggml_type`)
or out-of-bounds reads/writes leading to `GGML_ABORT` calls,
crashing the server process.
This PR introduces robust input validation and replaces `abort()`
calls with graceful error handling:
- **Type Validation:** `deserialize_tensor` now checks if the
`tensor->type` is within the valid `GGML_TYPE_COUNT` range
*before* calling `ggml_new_tensor_4d`. Returns `nullptr` on
invalid type.
- **Bounds Checks:** Replaced `GGML_ABORT` in `set_tensor`,
`set_tensor_hash`, and `get_tensor` handlers with error
logging and returning `false` when data/offset parameters
are out of buffer bounds.
- **Size Checks:** Added safe arithmetic checks (for overflow) in
`graph_compute` when calculating required message sizes based
on client-provided `n_nodes` and `n_tensors`. Returns early
if the reported sizes conflict with the actual message size or
would lead to overflow.
- **Error Propagation:**
- `create_node` now checks for `nullptr` return values from
`deserialize_tensor` and its recursive calls, propagating
`nullptr` upwards on failure. Uses `find` instead of `at`
for safer map access.
- `copy_tensor` now checks for `nullptr` from `deserialize_tensor`
and sets the response status to failure if deserialization
or bounds checks fail.
- `graph_compute` now checks for `nullptr` return from
`create_node` and returns failure status correctly. The final
return value now reflects the actual computation status.
These changes improve the RPC server's resilience
against malformed client requests, preventing crashes and ensuring
errors are handled more gracefully.
Signed-off-by: Ville Vesilehto <ville@vesilehto.fi>
* refactor(rpc): address pr comments
removed comments and unnecessary returns
Signed-off-by: Ville Vesilehto <ville@vesilehto.fi>
* refactor(rpc): ambiguous nullptr from create_node
rpc_server::create_node could previously return nullptr if the input ID
was 0 (valid) or if an internal error (deserialization, recursion
failure) occurred (invalid). This ambiguity made error handling
difficult for the caller (`graph_compute`).
This commit clarifies the meaning of nullptr:
- `graph_compute` now checks if the input 'id' was non-zero when
`create_node` returns nullptr, correctly identifying failures
versus intentional null links.
- `create_node` avoids recursive calls for zero IDs and propagates
nullptr unambiguously on failure during recursion.
Signed-off-by: Ville Vesilehto <ville@vesilehto.fi>
* refactor(rpc): initial zero check in create_node
The caller (`graph_compute`) already checks `id != 0` when handling
a `nullptr` return from `create_node`, correctly distinguishing
intentional null links from actual errors. This makes the initial
`if (id == 0)` check redundant.
Also removes the log message when a tensor ID is not found in the
provided map which was added in this branch.
Signed-off-by: Ville Vesilehto <ville@vesilehto.fi>
* fix(rpc): Handle get_alloc_size failure in server
Check the return value of `server.get_alloc_size` in the RPC server
loop. If the call fails, return early to close the connection.
Signed-off-by: Ville Vesilehto <ville@vesilehto.fi>
* refactor(rpc): input size validation in graph_compute
Removes detailed, step-by-step size calculations and overflow
checks in favor of simpler direct comparisons, assuming 64-bit
overflow is unlikely.
Signed-off-by: Ville Vesilehto <ville@vesilehto.fi>
* refactor(rpc): remove extra status code setting
Removes the explicit setting of `response.result = GGML_STATUS_FAILED`
when `create_node` returns `nullptr` within `graph_compute`.
Primary signal is the `false` return value in case of failure.
Signed-off-by: Ville Vesilehto <ville@vesilehto.fi>
* refactor(rpc): remove redundant check for tensor->type
Breaks CI on ubuntu-cpu-make. Tensor type is uint32_t, thus
the check is not needed.
Signed-off-by: Ville Vesilehto <ville@vesilehto.fi>
---------
Signed-off-by: Ville Vesilehto <ville@vesilehto.fi>
* SYCL: Add all missing unary kernels
ggml-ci
* decouple kernel launch range from data size using strided loop
* use ciel_div helper for num_blocks
ggml-ci
* clean auto imported header files
RPC_CMD_SET_TENSOR always returns an empty response and we send this 4
times per token. We can improve TG speed if we don't wait for this empty
response.
The performance impact of this change depends on the network latency.
