597 lines
13 KiB
C
597 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2016 MediaTek Inc.
|
|
*
|
|
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
|
|
*/
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_wakeirq.h>
|
|
|
|
#include "mtu3.h"
|
|
#include "mtu3_dr.h"
|
|
#include "mtu3_debug.h"
|
|
|
|
/* u2-port0 should be powered on and enabled; */
|
|
int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks)
|
|
{
|
|
void __iomem *ibase = ssusb->ippc_base;
|
|
u32 value, check_val;
|
|
int ret;
|
|
|
|
check_val = ex_clks | SSUSB_SYS125_RST_B_STS | SSUSB_SYSPLL_STABLE |
|
|
SSUSB_REF_RST_B_STS;
|
|
|
|
ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
|
|
(check_val == (value & check_val)), 100, 20000);
|
|
if (ret) {
|
|
dev_err(ssusb->dev, "clks of sts1 are not stable!\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS2, value,
|
|
(value & SSUSB_U2_MAC_SYS_RST_B_STS), 100, 10000);
|
|
if (ret) {
|
|
dev_err(ssusb->dev, "mac2 clock is not stable\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wait_for_ip_sleep(struct ssusb_mtk *ssusb)
|
|
{
|
|
bool sleep_check = true;
|
|
u32 value;
|
|
int ret;
|
|
|
|
if (!ssusb->is_host)
|
|
sleep_check = ssusb_gadget_ip_sleep_check(ssusb);
|
|
|
|
if (!sleep_check)
|
|
return 0;
|
|
|
|
/* wait for ip enter sleep mode */
|
|
ret = readl_poll_timeout(ssusb->ippc_base + U3D_SSUSB_IP_PW_STS1, value,
|
|
(value & SSUSB_IP_SLEEP_STS), 100, 100000);
|
|
if (ret) {
|
|
dev_err(ssusb->dev, "ip sleep failed!!!\n");
|
|
ret = -EBUSY;
|
|
} else {
|
|
/* workaround: avoid wrong wakeup signal latch for some soc */
|
|
usleep_range(100, 200);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ssusb_phy_init(struct ssusb_mtk *ssusb)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < ssusb->num_phys; i++) {
|
|
ret = phy_init(ssusb->phys[i]);
|
|
if (ret)
|
|
goto exit_phy;
|
|
}
|
|
return 0;
|
|
|
|
exit_phy:
|
|
for (; i > 0; i--)
|
|
phy_exit(ssusb->phys[i - 1]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ssusb_phy_exit(struct ssusb_mtk *ssusb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ssusb->num_phys; i++)
|
|
phy_exit(ssusb->phys[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssusb_phy_power_on(struct ssusb_mtk *ssusb)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < ssusb->num_phys; i++) {
|
|
ret = phy_power_on(ssusb->phys[i]);
|
|
if (ret)
|
|
goto power_off_phy;
|
|
}
|
|
return 0;
|
|
|
|
power_off_phy:
|
|
for (; i > 0; i--)
|
|
phy_power_off(ssusb->phys[i - 1]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ssusb_phy_power_off(struct ssusb_mtk *ssusb)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ssusb->num_phys; i++)
|
|
phy_power_off(ssusb->phys[i]);
|
|
}
|
|
|
|
static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = regulator_enable(ssusb->vusb33);
|
|
if (ret) {
|
|
dev_err(ssusb->dev, "failed to enable vusb33\n");
|
|
goto vusb33_err;
|
|
}
|
|
|
|
ret = clk_bulk_prepare_enable(BULK_CLKS_CNT, ssusb->clks);
|
|
if (ret)
|
|
goto clks_err;
|
|
|
|
ret = ssusb_phy_init(ssusb);
|
|
if (ret) {
|
|
dev_err(ssusb->dev, "failed to init phy\n");
|
|
goto phy_init_err;
|
|
}
|
|
|
|
ret = ssusb_phy_power_on(ssusb);
|
|
if (ret) {
|
|
dev_err(ssusb->dev, "failed to power on phy\n");
|
|
goto phy_err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
phy_err:
|
|
ssusb_phy_exit(ssusb);
|
|
phy_init_err:
|
|
clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
|
|
clks_err:
|
|
regulator_disable(ssusb->vusb33);
|
|
vusb33_err:
|
|
return ret;
|
|
}
|
|
|
|
static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
|
|
{
|
|
clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
|
|
regulator_disable(ssusb->vusb33);
|
|
ssusb_phy_power_off(ssusb);
|
|
ssusb_phy_exit(ssusb);
|
|
}
|
|
|
|
static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
|
|
{
|
|
/* reset whole ip (xhci & u3d) */
|
|
mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
|
|
udelay(1);
|
|
mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
|
|
|
|
/*
|
|
* device ip may be powered on in firmware/BROM stage before entering
|
|
* kernel stage;
|
|
* power down device ip, otherwise ip-sleep will fail when working as
|
|
* host only mode
|
|
*/
|
|
mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
|
|
}
|
|
|
|
static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
|
|
struct clk_bulk_data *clks = ssusb->clks;
|
|
struct device *dev = &pdev->dev;
|
|
int i;
|
|
int ret;
|
|
|
|
ssusb->vusb33 = devm_regulator_get(dev, "vusb33");
|
|
if (IS_ERR(ssusb->vusb33)) {
|
|
dev_err(dev, "failed to get vusb33\n");
|
|
return PTR_ERR(ssusb->vusb33);
|
|
}
|
|
|
|
clks[0].id = "sys_ck";
|
|
clks[1].id = "ref_ck";
|
|
clks[2].id = "mcu_ck";
|
|
clks[3].id = "dma_ck";
|
|
ret = devm_clk_bulk_get_optional(dev, BULK_CLKS_CNT, clks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ssusb->num_phys = of_count_phandle_with_args(node,
|
|
"phys", "#phy-cells");
|
|
if (ssusb->num_phys > 0) {
|
|
ssusb->phys = devm_kcalloc(dev, ssusb->num_phys,
|
|
sizeof(*ssusb->phys), GFP_KERNEL);
|
|
if (!ssusb->phys)
|
|
return -ENOMEM;
|
|
} else {
|
|
ssusb->num_phys = 0;
|
|
}
|
|
|
|
for (i = 0; i < ssusb->num_phys; i++) {
|
|
ssusb->phys[i] = devm_of_phy_get_by_index(dev, node, i);
|
|
if (IS_ERR(ssusb->phys[i])) {
|
|
dev_err(dev, "failed to get phy-%d\n", i);
|
|
return PTR_ERR(ssusb->phys[i]);
|
|
}
|
|
}
|
|
|
|
ssusb->ippc_base = devm_platform_ioremap_resource_byname(pdev, "ippc");
|
|
if (IS_ERR(ssusb->ippc_base))
|
|
return PTR_ERR(ssusb->ippc_base);
|
|
|
|
ssusb->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
|
|
if (ssusb->wakeup_irq == -EPROBE_DEFER)
|
|
return ssusb->wakeup_irq;
|
|
|
|
ssusb->dr_mode = usb_get_dr_mode(dev);
|
|
if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN)
|
|
ssusb->dr_mode = USB_DR_MODE_OTG;
|
|
|
|
if (ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
|
|
goto out;
|
|
|
|
/* if host role is supported */
|
|
ret = ssusb_wakeup_of_property_parse(ssusb, node);
|
|
if (ret) {
|
|
dev_err(dev, "failed to parse uwk property\n");
|
|
return ret;
|
|
}
|
|
|
|
/* optional property, ignore the error if it does not exist */
|
|
of_property_read_u32(node, "mediatek,u3p-dis-msk",
|
|
&ssusb->u3p_dis_msk);
|
|
of_property_read_u32(node, "mediatek,u2p-dis-msk",
|
|
&ssusb->u2p_dis_msk);
|
|
|
|
otg_sx->vbus = devm_regulator_get(dev, "vbus");
|
|
if (IS_ERR(otg_sx->vbus)) {
|
|
dev_err(dev, "failed to get vbus\n");
|
|
return PTR_ERR(otg_sx->vbus);
|
|
}
|
|
|
|
if (ssusb->dr_mode == USB_DR_MODE_HOST)
|
|
goto out;
|
|
|
|
/* if dual-role mode is supported */
|
|
otg_sx->is_u3_drd = of_property_read_bool(node, "mediatek,usb3-drd");
|
|
otg_sx->manual_drd_enabled =
|
|
of_property_read_bool(node, "enable-manual-drd");
|
|
otg_sx->role_sw_used = of_property_read_bool(node, "usb-role-switch");
|
|
|
|
/* can't disable port0 when use dual-role mode */
|
|
ssusb->u2p_dis_msk &= ~0x1;
|
|
|
|
if (otg_sx->role_sw_used || otg_sx->manual_drd_enabled)
|
|
goto out;
|
|
|
|
if (of_property_read_bool(node, "extcon")) {
|
|
otg_sx->edev = extcon_get_edev_by_phandle(ssusb->dev, 0);
|
|
if (IS_ERR(otg_sx->edev)) {
|
|
return dev_err_probe(dev, PTR_ERR(otg_sx->edev),
|
|
"couldn't get extcon device\n");
|
|
}
|
|
}
|
|
|
|
out:
|
|
dev_info(dev, "dr_mode: %d, is_u3_dr: %d, drd: %s\n",
|
|
ssusb->dr_mode, otg_sx->is_u3_drd,
|
|
otg_sx->manual_drd_enabled ? "manual" : "auto");
|
|
dev_info(dev, "u2p_dis_msk: %x, u3p_dis_msk: %x\n",
|
|
ssusb->u2p_dis_msk, ssusb->u3p_dis_msk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtu3_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
struct ssusb_mtk *ssusb;
|
|
int ret = -ENOMEM;
|
|
|
|
/* all elements are set to ZERO as default value */
|
|
ssusb = devm_kzalloc(dev, sizeof(*ssusb), GFP_KERNEL);
|
|
if (!ssusb)
|
|
return -ENOMEM;
|
|
|
|
ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
dev_err(dev, "No suitable DMA config available\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ssusb);
|
|
ssusb->dev = dev;
|
|
|
|
ret = get_ssusb_rscs(pdev, ssusb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ssusb_debugfs_create_root(ssusb);
|
|
|
|
/* enable power domain */
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_use_autosuspend(dev);
|
|
pm_runtime_set_autosuspend_delay(dev, 4000);
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_get_sync(dev);
|
|
|
|
device_init_wakeup(dev, true);
|
|
|
|
ret = ssusb_rscs_init(ssusb);
|
|
if (ret)
|
|
goto comm_init_err;
|
|
|
|
if (ssusb->wakeup_irq > 0) {
|
|
ret = dev_pm_set_dedicated_wake_irq(dev, ssusb->wakeup_irq);
|
|
if (ret) {
|
|
dev_err(dev, "failed to set wakeup irq %d\n", ssusb->wakeup_irq);
|
|
goto comm_exit;
|
|
}
|
|
dev_info(dev, "wakeup irq %d\n", ssusb->wakeup_irq);
|
|
}
|
|
|
|
ssusb_ip_sw_reset(ssusb);
|
|
|
|
if (IS_ENABLED(CONFIG_USB_MTU3_HOST))
|
|
ssusb->dr_mode = USB_DR_MODE_HOST;
|
|
else if (IS_ENABLED(CONFIG_USB_MTU3_GADGET))
|
|
ssusb->dr_mode = USB_DR_MODE_PERIPHERAL;
|
|
|
|
/* default as host */
|
|
ssusb->is_host = !(ssusb->dr_mode == USB_DR_MODE_PERIPHERAL);
|
|
|
|
switch (ssusb->dr_mode) {
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
ret = ssusb_gadget_init(ssusb);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize gadget\n");
|
|
goto comm_exit;
|
|
}
|
|
break;
|
|
case USB_DR_MODE_HOST:
|
|
ret = ssusb_host_init(ssusb, node);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize host\n");
|
|
goto comm_exit;
|
|
}
|
|
break;
|
|
case USB_DR_MODE_OTG:
|
|
ret = ssusb_gadget_init(ssusb);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize gadget\n");
|
|
goto comm_exit;
|
|
}
|
|
|
|
ret = ssusb_host_init(ssusb, node);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize host\n");
|
|
goto gadget_exit;
|
|
}
|
|
|
|
ret = ssusb_otg_switch_init(ssusb);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize switch\n");
|
|
goto host_exit;
|
|
}
|
|
break;
|
|
default:
|
|
dev_err(dev, "unsupported mode: %d\n", ssusb->dr_mode);
|
|
ret = -EINVAL;
|
|
goto comm_exit;
|
|
}
|
|
|
|
device_enable_async_suspend(dev);
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
pm_runtime_forbid(dev);
|
|
|
|
return 0;
|
|
|
|
host_exit:
|
|
ssusb_host_exit(ssusb);
|
|
gadget_exit:
|
|
ssusb_gadget_exit(ssusb);
|
|
comm_exit:
|
|
ssusb_rscs_exit(ssusb);
|
|
comm_init_err:
|
|
pm_runtime_put_noidle(dev);
|
|
pm_runtime_disable(dev);
|
|
ssusb_debugfs_remove_root(ssusb);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mtu3_remove(struct platform_device *pdev)
|
|
{
|
|
struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
|
|
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
|
|
switch (ssusb->dr_mode) {
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
ssusb_gadget_exit(ssusb);
|
|
break;
|
|
case USB_DR_MODE_HOST:
|
|
ssusb_host_exit(ssusb);
|
|
break;
|
|
case USB_DR_MODE_OTG:
|
|
ssusb_otg_switch_exit(ssusb);
|
|
ssusb_gadget_exit(ssusb);
|
|
ssusb_host_exit(ssusb);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ssusb_rscs_exit(ssusb);
|
|
ssusb_debugfs_remove_root(ssusb);
|
|
pm_runtime_disable(&pdev->dev);
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
pm_runtime_set_suspended(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int resume_ip_and_ports(struct ssusb_mtk *ssusb, pm_message_t msg)
|
|
{
|
|
switch (ssusb->dr_mode) {
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
ssusb_gadget_resume(ssusb, msg);
|
|
break;
|
|
case USB_DR_MODE_HOST:
|
|
ssusb_host_resume(ssusb, false);
|
|
break;
|
|
case USB_DR_MODE_OTG:
|
|
ssusb_host_resume(ssusb, !ssusb->is_host);
|
|
if (!ssusb->is_host)
|
|
ssusb_gadget_resume(ssusb, msg);
|
|
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtu3_suspend_common(struct device *dev, pm_message_t msg)
|
|
{
|
|
struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
switch (ssusb->dr_mode) {
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
ret = ssusb_gadget_suspend(ssusb, msg);
|
|
if (ret)
|
|
goto err;
|
|
|
|
break;
|
|
case USB_DR_MODE_HOST:
|
|
ssusb_host_suspend(ssusb);
|
|
break;
|
|
case USB_DR_MODE_OTG:
|
|
if (!ssusb->is_host) {
|
|
ret = ssusb_gadget_suspend(ssusb, msg);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
ssusb_host_suspend(ssusb);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = wait_for_ip_sleep(ssusb);
|
|
if (ret)
|
|
goto sleep_err;
|
|
|
|
ssusb_phy_power_off(ssusb);
|
|
clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
|
|
ssusb_wakeup_set(ssusb, true);
|
|
return 0;
|
|
|
|
sleep_err:
|
|
resume_ip_and_ports(ssusb, msg);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int mtu3_resume_common(struct device *dev, pm_message_t msg)
|
|
{
|
|
struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
ssusb_wakeup_set(ssusb, false);
|
|
ret = clk_bulk_prepare_enable(BULK_CLKS_CNT, ssusb->clks);
|
|
if (ret)
|
|
goto clks_err;
|
|
|
|
ret = ssusb_phy_power_on(ssusb);
|
|
if (ret)
|
|
goto phy_err;
|
|
|
|
return resume_ip_and_ports(ssusb, msg);
|
|
|
|
phy_err:
|
|
clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
|
|
clks_err:
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused mtu3_suspend(struct device *dev)
|
|
{
|
|
return mtu3_suspend_common(dev, PMSG_SUSPEND);
|
|
}
|
|
|
|
static int __maybe_unused mtu3_resume(struct device *dev)
|
|
{
|
|
return mtu3_resume_common(dev, PMSG_SUSPEND);
|
|
}
|
|
|
|
static int __maybe_unused mtu3_runtime_suspend(struct device *dev)
|
|
{
|
|
if (!device_may_wakeup(dev))
|
|
return 0;
|
|
|
|
return mtu3_suspend_common(dev, PMSG_AUTO_SUSPEND);
|
|
}
|
|
|
|
static int __maybe_unused mtu3_runtime_resume(struct device *dev)
|
|
{
|
|
if (!device_may_wakeup(dev))
|
|
return 0;
|
|
|
|
return mtu3_resume_common(dev, PMSG_AUTO_SUSPEND);
|
|
}
|
|
|
|
static const struct dev_pm_ops mtu3_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(mtu3_suspend, mtu3_resume)
|
|
SET_RUNTIME_PM_OPS(mtu3_runtime_suspend,
|
|
mtu3_runtime_resume, NULL)
|
|
};
|
|
|
|
#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &mtu3_pm_ops : NULL)
|
|
|
|
static const struct of_device_id mtu3_of_match[] = {
|
|
{.compatible = "mediatek,mt8173-mtu3",},
|
|
{.compatible = "mediatek,mtu3",},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mtu3_of_match);
|
|
|
|
static struct platform_driver mtu3_driver = {
|
|
.probe = mtu3_probe,
|
|
.remove = mtu3_remove,
|
|
.driver = {
|
|
.name = MTU3_DRIVER_NAME,
|
|
.pm = DEV_PM_OPS,
|
|
.of_match_table = mtu3_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(mtu3_driver);
|
|
|
|
MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("MediaTek USB3 DRD Controller Driver");
|