3641 lines
94 KiB
C
3641 lines
94 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* QLogic Fibre Channel HBA Driver
|
|
* Copyright (c) 2003-2014 QLogic Corporation
|
|
*/
|
|
#include "qla_def.h"
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
/*
|
|
* NVRAM support routines
|
|
*/
|
|
|
|
/**
|
|
* qla2x00_lock_nvram_access() -
|
|
* @ha: HA context
|
|
*/
|
|
static void
|
|
qla2x00_lock_nvram_access(struct qla_hw_data *ha)
|
|
{
|
|
uint16_t data;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
|
|
data = rd_reg_word(®->nvram);
|
|
while (data & NVR_BUSY) {
|
|
udelay(100);
|
|
data = rd_reg_word(®->nvram);
|
|
}
|
|
|
|
/* Lock resource */
|
|
wrt_reg_word(®->u.isp2300.host_semaphore, 0x1);
|
|
rd_reg_word(®->u.isp2300.host_semaphore);
|
|
udelay(5);
|
|
data = rd_reg_word(®->u.isp2300.host_semaphore);
|
|
while ((data & BIT_0) == 0) {
|
|
/* Lock failed */
|
|
udelay(100);
|
|
wrt_reg_word(®->u.isp2300.host_semaphore, 0x1);
|
|
rd_reg_word(®->u.isp2300.host_semaphore);
|
|
udelay(5);
|
|
data = rd_reg_word(®->u.isp2300.host_semaphore);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* qla2x00_unlock_nvram_access() -
|
|
* @ha: HA context
|
|
*/
|
|
static void
|
|
qla2x00_unlock_nvram_access(struct qla_hw_data *ha)
|
|
{
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
|
|
wrt_reg_word(®->u.isp2300.host_semaphore, 0);
|
|
rd_reg_word(®->u.isp2300.host_semaphore);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* qla2x00_nv_write() - Prepare for NVRAM read/write operation.
|
|
* @ha: HA context
|
|
* @data: Serial interface selector
|
|
*/
|
|
static void
|
|
qla2x00_nv_write(struct qla_hw_data *ha, uint16_t data)
|
|
{
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
wrt_reg_word(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
NVRAM_DELAY();
|
|
wrt_reg_word(®->nvram, data | NVR_SELECT | NVR_CLOCK |
|
|
NVR_WRT_ENABLE);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
NVRAM_DELAY();
|
|
wrt_reg_word(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
NVRAM_DELAY();
|
|
}
|
|
|
|
/**
|
|
* qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
|
|
* NVRAM.
|
|
* @ha: HA context
|
|
* @nv_cmd: NVRAM command
|
|
*
|
|
* Bit definitions for NVRAM command:
|
|
*
|
|
* Bit 26 = start bit
|
|
* Bit 25, 24 = opcode
|
|
* Bit 23-16 = address
|
|
* Bit 15-0 = write data
|
|
*
|
|
* Returns the word read from nvram @addr.
|
|
*/
|
|
static uint16_t
|
|
qla2x00_nvram_request(struct qla_hw_data *ha, uint32_t nv_cmd)
|
|
{
|
|
uint8_t cnt;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
uint16_t data = 0;
|
|
uint16_t reg_data;
|
|
|
|
/* Send command to NVRAM. */
|
|
nv_cmd <<= 5;
|
|
for (cnt = 0; cnt < 11; cnt++) {
|
|
if (nv_cmd & BIT_31)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
else
|
|
qla2x00_nv_write(ha, 0);
|
|
nv_cmd <<= 1;
|
|
}
|
|
|
|
/* Read data from NVRAM. */
|
|
for (cnt = 0; cnt < 16; cnt++) {
|
|
wrt_reg_word(®->nvram, NVR_SELECT | NVR_CLOCK);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
NVRAM_DELAY();
|
|
data <<= 1;
|
|
reg_data = rd_reg_word(®->nvram);
|
|
if (reg_data & NVR_DATA_IN)
|
|
data |= BIT_0;
|
|
wrt_reg_word(®->nvram, NVR_SELECT);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
NVRAM_DELAY();
|
|
}
|
|
|
|
/* Deselect chip. */
|
|
wrt_reg_word(®->nvram, NVR_DESELECT);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
NVRAM_DELAY();
|
|
|
|
return data;
|
|
}
|
|
|
|
|
|
/**
|
|
* qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
|
|
* request routine to get the word from NVRAM.
|
|
* @ha: HA context
|
|
* @addr: Address in NVRAM to read
|
|
*
|
|
* Returns the word read from nvram @addr.
|
|
*/
|
|
static uint16_t
|
|
qla2x00_get_nvram_word(struct qla_hw_data *ha, uint32_t addr)
|
|
{
|
|
uint16_t data;
|
|
uint32_t nv_cmd;
|
|
|
|
nv_cmd = addr << 16;
|
|
nv_cmd |= NV_READ_OP;
|
|
data = qla2x00_nvram_request(ha, nv_cmd);
|
|
|
|
return (data);
|
|
}
|
|
|
|
/**
|
|
* qla2x00_nv_deselect() - Deselect NVRAM operations.
|
|
* @ha: HA context
|
|
*/
|
|
static void
|
|
qla2x00_nv_deselect(struct qla_hw_data *ha)
|
|
{
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
wrt_reg_word(®->nvram, NVR_DESELECT);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
NVRAM_DELAY();
|
|
}
|
|
|
|
/**
|
|
* qla2x00_write_nvram_word() - Write NVRAM data.
|
|
* @ha: HA context
|
|
* @addr: Address in NVRAM to write
|
|
* @data: word to program
|
|
*/
|
|
static void
|
|
qla2x00_write_nvram_word(struct qla_hw_data *ha, uint32_t addr, __le16 data)
|
|
{
|
|
int count;
|
|
uint16_t word;
|
|
uint32_t nv_cmd, wait_cnt;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
|
|
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
qla2x00_nv_write(ha, 0);
|
|
qla2x00_nv_write(ha, 0);
|
|
|
|
for (word = 0; word < 8; word++)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Write data */
|
|
nv_cmd = (addr << 16) | NV_WRITE_OP;
|
|
nv_cmd |= (__force u16)data;
|
|
nv_cmd <<= 5;
|
|
for (count = 0; count < 27; count++) {
|
|
if (nv_cmd & BIT_31)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
else
|
|
qla2x00_nv_write(ha, 0);
|
|
|
|
nv_cmd <<= 1;
|
|
}
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Wait for NVRAM to become ready */
|
|
wrt_reg_word(®->nvram, NVR_SELECT);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
wait_cnt = NVR_WAIT_CNT;
|
|
do {
|
|
if (!--wait_cnt) {
|
|
ql_dbg(ql_dbg_user, vha, 0x708d,
|
|
"NVRAM didn't go ready...\n");
|
|
break;
|
|
}
|
|
NVRAM_DELAY();
|
|
word = rd_reg_word(®->nvram);
|
|
} while ((word & NVR_DATA_IN) == 0);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Disable writes */
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
for (count = 0; count < 10; count++)
|
|
qla2x00_nv_write(ha, 0);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
}
|
|
|
|
static int
|
|
qla2x00_write_nvram_word_tmo(struct qla_hw_data *ha, uint32_t addr,
|
|
__le16 data, uint32_t tmo)
|
|
{
|
|
int ret, count;
|
|
uint16_t word;
|
|
uint32_t nv_cmd;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
ret = QLA_SUCCESS;
|
|
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
qla2x00_nv_write(ha, 0);
|
|
qla2x00_nv_write(ha, 0);
|
|
|
|
for (word = 0; word < 8; word++)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Write data */
|
|
nv_cmd = (addr << 16) | NV_WRITE_OP;
|
|
nv_cmd |= (__force u16)data;
|
|
nv_cmd <<= 5;
|
|
for (count = 0; count < 27; count++) {
|
|
if (nv_cmd & BIT_31)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
else
|
|
qla2x00_nv_write(ha, 0);
|
|
|
|
nv_cmd <<= 1;
|
|
}
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Wait for NVRAM to become ready */
|
|
wrt_reg_word(®->nvram, NVR_SELECT);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
do {
|
|
NVRAM_DELAY();
|
|
word = rd_reg_word(®->nvram);
|
|
if (!--tmo) {
|
|
ret = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
} while ((word & NVR_DATA_IN) == 0);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Disable writes */
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
for (count = 0; count < 10; count++)
|
|
qla2x00_nv_write(ha, 0);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* qla2x00_clear_nvram_protection() -
|
|
* @ha: HA context
|
|
*/
|
|
static int
|
|
qla2x00_clear_nvram_protection(struct qla_hw_data *ha)
|
|
{
|
|
int ret, stat;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
uint32_t word, wait_cnt;
|
|
__le16 wprot, wprot_old;
|
|
scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
|
|
|
|
/* Clear NVRAM write protection. */
|
|
ret = QLA_FUNCTION_FAILED;
|
|
|
|
wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
|
|
stat = qla2x00_write_nvram_word_tmo(ha, ha->nvram_base,
|
|
cpu_to_le16(0x1234), 100000);
|
|
wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
|
|
if (stat != QLA_SUCCESS || wprot != cpu_to_le16(0x1234)) {
|
|
/* Write enable. */
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
qla2x00_nv_write(ha, 0);
|
|
qla2x00_nv_write(ha, 0);
|
|
for (word = 0; word < 8; word++)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Enable protection register. */
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE);
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE);
|
|
for (word = 0; word < 8; word++)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Clear protection register (ffff is cleared). */
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
|
|
for (word = 0; word < 8; word++)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Wait for NVRAM to become ready. */
|
|
wrt_reg_word(®->nvram, NVR_SELECT);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
wait_cnt = NVR_WAIT_CNT;
|
|
do {
|
|
if (!--wait_cnt) {
|
|
ql_dbg(ql_dbg_user, vha, 0x708e,
|
|
"NVRAM didn't go ready...\n");
|
|
break;
|
|
}
|
|
NVRAM_DELAY();
|
|
word = rd_reg_word(®->nvram);
|
|
} while ((word & NVR_DATA_IN) == 0);
|
|
|
|
if (wait_cnt)
|
|
ret = QLA_SUCCESS;
|
|
} else
|
|
qla2x00_write_nvram_word(ha, ha->nvram_base, wprot_old);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
qla2x00_set_nvram_protection(struct qla_hw_data *ha, int stat)
|
|
{
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
uint32_t word, wait_cnt;
|
|
scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
|
|
|
|
if (stat != QLA_SUCCESS)
|
|
return;
|
|
|
|
/* Set NVRAM write protection. */
|
|
/* Write enable. */
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
qla2x00_nv_write(ha, 0);
|
|
qla2x00_nv_write(ha, 0);
|
|
for (word = 0; word < 8; word++)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Enable protection register. */
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE);
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE);
|
|
for (word = 0; word < 8; word++)
|
|
qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Enable protection register. */
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE);
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
|
|
for (word = 0; word < 8; word++)
|
|
qla2x00_nv_write(ha, NVR_PR_ENABLE);
|
|
|
|
qla2x00_nv_deselect(ha);
|
|
|
|
/* Wait for NVRAM to become ready. */
|
|
wrt_reg_word(®->nvram, NVR_SELECT);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
wait_cnt = NVR_WAIT_CNT;
|
|
do {
|
|
if (!--wait_cnt) {
|
|
ql_dbg(ql_dbg_user, vha, 0x708f,
|
|
"NVRAM didn't go ready...\n");
|
|
break;
|
|
}
|
|
NVRAM_DELAY();
|
|
word = rd_reg_word(®->nvram);
|
|
} while ((word & NVR_DATA_IN) == 0);
|
|
}
|
|
|
|
|
|
/*****************************************************************************/
|
|
/* Flash Manipulation Routines */
|
|
/*****************************************************************************/
|
|
|
|
static inline uint32_t
|
|
flash_conf_addr(struct qla_hw_data *ha, uint32_t faddr)
|
|
{
|
|
return ha->flash_conf_off + faddr;
|
|
}
|
|
|
|
static inline uint32_t
|
|
flash_data_addr(struct qla_hw_data *ha, uint32_t faddr)
|
|
{
|
|
return ha->flash_data_off + faddr;
|
|
}
|
|
|
|
static inline uint32_t
|
|
nvram_conf_addr(struct qla_hw_data *ha, uint32_t naddr)
|
|
{
|
|
return ha->nvram_conf_off + naddr;
|
|
}
|
|
|
|
static inline uint32_t
|
|
nvram_data_addr(struct qla_hw_data *ha, uint32_t naddr)
|
|
{
|
|
return ha->nvram_data_off + naddr;
|
|
}
|
|
|
|
static int
|
|
qla24xx_read_flash_dword(struct qla_hw_data *ha, uint32_t addr, uint32_t *data)
|
|
{
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
ulong cnt = 30000;
|
|
|
|
wrt_reg_dword(®->flash_addr, addr & ~FARX_DATA_FLAG);
|
|
|
|
while (cnt--) {
|
|
if (rd_reg_dword(®->flash_addr) & FARX_DATA_FLAG) {
|
|
*data = rd_reg_dword(®->flash_data);
|
|
return QLA_SUCCESS;
|
|
}
|
|
udelay(10);
|
|
cond_resched();
|
|
}
|
|
|
|
ql_log(ql_log_warn, pci_get_drvdata(ha->pdev), 0x7090,
|
|
"Flash read dword at %x timeout.\n", addr);
|
|
*data = 0xDEADDEAD;
|
|
return QLA_FUNCTION_TIMEOUT;
|
|
}
|
|
|
|
int
|
|
qla24xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
|
|
uint32_t dwords)
|
|
{
|
|
ulong i;
|
|
int ret = QLA_SUCCESS;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
/* Dword reads to flash. */
|
|
faddr = flash_data_addr(ha, faddr);
|
|
for (i = 0; i < dwords; i++, faddr++, dwptr++) {
|
|
ret = qla24xx_read_flash_dword(ha, faddr, dwptr);
|
|
if (ret != QLA_SUCCESS)
|
|
break;
|
|
cpu_to_le32s(dwptr);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qla24xx_write_flash_dword(struct qla_hw_data *ha, uint32_t addr, uint32_t data)
|
|
{
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
ulong cnt = 500000;
|
|
|
|
wrt_reg_dword(®->flash_data, data);
|
|
wrt_reg_dword(®->flash_addr, addr | FARX_DATA_FLAG);
|
|
|
|
while (cnt--) {
|
|
if (!(rd_reg_dword(®->flash_addr) & FARX_DATA_FLAG))
|
|
return QLA_SUCCESS;
|
|
udelay(10);
|
|
cond_resched();
|
|
}
|
|
|
|
ql_log(ql_log_warn, pci_get_drvdata(ha->pdev), 0x7090,
|
|
"Flash write dword at %x timeout.\n", addr);
|
|
return QLA_FUNCTION_TIMEOUT;
|
|
}
|
|
|
|
static void
|
|
qla24xx_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
|
|
uint8_t *flash_id)
|
|
{
|
|
uint32_t faddr, ids = 0;
|
|
|
|
*man_id = *flash_id = 0;
|
|
|
|
faddr = flash_conf_addr(ha, 0x03ab);
|
|
if (!qla24xx_read_flash_dword(ha, faddr, &ids)) {
|
|
*man_id = LSB(ids);
|
|
*flash_id = MSB(ids);
|
|
}
|
|
|
|
/* Check if man_id and flash_id are valid. */
|
|
if (ids != 0xDEADDEAD && (*man_id == 0 || *flash_id == 0)) {
|
|
/* Read information using 0x9f opcode
|
|
* Device ID, Mfg ID would be read in the format:
|
|
* <Ext Dev Info><Device ID Part2><Device ID Part 1><Mfg ID>
|
|
* Example: ATMEL 0x00 01 45 1F
|
|
* Extract MFG and Dev ID from last two bytes.
|
|
*/
|
|
faddr = flash_conf_addr(ha, 0x009f);
|
|
if (!qla24xx_read_flash_dword(ha, faddr, &ids)) {
|
|
*man_id = LSB(ids);
|
|
*flash_id = MSB(ids);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
qla2xxx_find_flt_start(scsi_qla_host_t *vha, uint32_t *start)
|
|
{
|
|
const char *loc, *locations[] = { "DEF", "PCI" };
|
|
uint32_t pcihdr, pcids;
|
|
uint16_t cnt, chksum;
|
|
__le16 *wptr;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct req_que *req = ha->req_q_map[0];
|
|
struct qla_flt_location *fltl = (void *)req->ring;
|
|
uint32_t *dcode = (uint32_t *)req->ring;
|
|
uint8_t *buf = (void *)req->ring, *bcode, last_image;
|
|
|
|
/*
|
|
* FLT-location structure resides after the last PCI region.
|
|
*/
|
|
|
|
/* Begin with sane defaults. */
|
|
loc = locations[0];
|
|
*start = 0;
|
|
if (IS_QLA24XX_TYPE(ha))
|
|
*start = FA_FLASH_LAYOUT_ADDR_24;
|
|
else if (IS_QLA25XX(ha))
|
|
*start = FA_FLASH_LAYOUT_ADDR;
|
|
else if (IS_QLA81XX(ha))
|
|
*start = FA_FLASH_LAYOUT_ADDR_81;
|
|
else if (IS_P3P_TYPE(ha)) {
|
|
*start = FA_FLASH_LAYOUT_ADDR_82;
|
|
goto end;
|
|
} else if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
|
|
*start = FA_FLASH_LAYOUT_ADDR_83;
|
|
goto end;
|
|
} else if (IS_QLA28XX(ha)) {
|
|
*start = FA_FLASH_LAYOUT_ADDR_28;
|
|
goto end;
|
|
}
|
|
|
|
/* Begin with first PCI expansion ROM header. */
|
|
pcihdr = 0;
|
|
do {
|
|
/* Verify PCI expansion ROM header. */
|
|
qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
|
|
bcode = buf + (pcihdr % 4);
|
|
if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa)
|
|
goto end;
|
|
|
|
/* Locate PCI data structure. */
|
|
pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
|
|
qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
|
|
bcode = buf + (pcihdr % 4);
|
|
|
|
/* Validate signature of PCI data structure. */
|
|
if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
|
|
bcode[0x2] != 'I' || bcode[0x3] != 'R')
|
|
goto end;
|
|
|
|
last_image = bcode[0x15] & BIT_7;
|
|
|
|
/* Locate next PCI expansion ROM. */
|
|
pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
|
|
} while (!last_image);
|
|
|
|
/* Now verify FLT-location structure. */
|
|
qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, sizeof(*fltl) >> 2);
|
|
if (memcmp(fltl->sig, "QFLT", 4))
|
|
goto end;
|
|
|
|
wptr = (__force __le16 *)req->ring;
|
|
cnt = sizeof(*fltl) / sizeof(*wptr);
|
|
for (chksum = 0; cnt--; wptr++)
|
|
chksum += le16_to_cpu(*wptr);
|
|
if (chksum) {
|
|
ql_log(ql_log_fatal, vha, 0x0045,
|
|
"Inconsistent FLTL detected: checksum=0x%x.\n", chksum);
|
|
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010e,
|
|
fltl, sizeof(*fltl));
|
|
return QLA_FUNCTION_FAILED;
|
|
}
|
|
|
|
/* Good data. Use specified location. */
|
|
loc = locations[1];
|
|
*start = (le16_to_cpu(fltl->start_hi) << 16 |
|
|
le16_to_cpu(fltl->start_lo)) >> 2;
|
|
end:
|
|
ql_dbg(ql_dbg_init, vha, 0x0046,
|
|
"FLTL[%s] = 0x%x.\n",
|
|
loc, *start);
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
static void
|
|
qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
|
|
{
|
|
const char *locations[] = { "DEF", "FLT" }, *loc = locations[1];
|
|
const uint32_t def_fw[] =
|
|
{ FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR_81 };
|
|
const uint32_t def_boot[] =
|
|
{ FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR_81 };
|
|
const uint32_t def_vpd_nvram[] =
|
|
{ FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR_81 };
|
|
const uint32_t def_vpd0[] =
|
|
{ 0, 0, FA_VPD0_ADDR_81 };
|
|
const uint32_t def_vpd1[] =
|
|
{ 0, 0, FA_VPD1_ADDR_81 };
|
|
const uint32_t def_nvram0[] =
|
|
{ 0, 0, FA_NVRAM0_ADDR_81 };
|
|
const uint32_t def_nvram1[] =
|
|
{ 0, 0, FA_NVRAM1_ADDR_81 };
|
|
const uint32_t def_fdt[] =
|
|
{ FA_FLASH_DESCR_ADDR_24, FA_FLASH_DESCR_ADDR,
|
|
FA_FLASH_DESCR_ADDR_81 };
|
|
const uint32_t def_npiv_conf0[] =
|
|
{ FA_NPIV_CONF0_ADDR_24, FA_NPIV_CONF0_ADDR,
|
|
FA_NPIV_CONF0_ADDR_81 };
|
|
const uint32_t def_npiv_conf1[] =
|
|
{ FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR,
|
|
FA_NPIV_CONF1_ADDR_81 };
|
|
const uint32_t fcp_prio_cfg0[] =
|
|
{ FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25,
|
|
0 };
|
|
const uint32_t fcp_prio_cfg1[] =
|
|
{ FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25,
|
|
0 };
|
|
|
|
struct qla_hw_data *ha = vha->hw;
|
|
uint32_t def = IS_QLA81XX(ha) ? 2 : IS_QLA25XX(ha) ? 1 : 0;
|
|
struct qla_flt_header *flt = ha->flt;
|
|
struct qla_flt_region *region = &flt->region[0];
|
|
__le16 *wptr;
|
|
uint16_t cnt, chksum;
|
|
uint32_t start;
|
|
|
|
/* Assign FCP prio region since older adapters may not have FLT, or
|
|
FCP prio region in it's FLT.
|
|
*/
|
|
ha->flt_region_fcp_prio = (ha->port_no == 0) ?
|
|
fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
|
|
|
|
ha->flt_region_flt = flt_addr;
|
|
wptr = (__force __le16 *)ha->flt;
|
|
ha->isp_ops->read_optrom(vha, flt, flt_addr << 2,
|
|
(sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE));
|
|
|
|
if (le16_to_cpu(*wptr) == 0xffff)
|
|
goto no_flash_data;
|
|
if (flt->version != cpu_to_le16(1)) {
|
|
ql_log(ql_log_warn, vha, 0x0047,
|
|
"Unsupported FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
|
|
le16_to_cpu(flt->version), le16_to_cpu(flt->length),
|
|
le16_to_cpu(flt->checksum));
|
|
goto no_flash_data;
|
|
}
|
|
|
|
cnt = (sizeof(*flt) + le16_to_cpu(flt->length)) / sizeof(*wptr);
|
|
for (chksum = 0; cnt--; wptr++)
|
|
chksum += le16_to_cpu(*wptr);
|
|
if (chksum) {
|
|
ql_log(ql_log_fatal, vha, 0x0048,
|
|
"Inconsistent FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
|
|
le16_to_cpu(flt->version), le16_to_cpu(flt->length),
|
|
le16_to_cpu(flt->checksum));
|
|
goto no_flash_data;
|
|
}
|
|
|
|
cnt = le16_to_cpu(flt->length) / sizeof(*region);
|
|
for ( ; cnt; cnt--, region++) {
|
|
/* Store addresses as DWORD offsets. */
|
|
start = le32_to_cpu(region->start) >> 2;
|
|
ql_dbg(ql_dbg_init, vha, 0x0049,
|
|
"FLT[%#x]: start=%#x end=%#x size=%#x.\n",
|
|
le16_to_cpu(region->code), start,
|
|
le32_to_cpu(region->end) >> 2,
|
|
le32_to_cpu(region->size) >> 2);
|
|
if (region->attribute)
|
|
ql_log(ql_dbg_init, vha, 0xffff,
|
|
"Region %x is secure\n", region->code);
|
|
|
|
switch (le16_to_cpu(region->code)) {
|
|
case FLT_REG_FCOE_FW:
|
|
if (!IS_QLA8031(ha))
|
|
break;
|
|
ha->flt_region_fw = start;
|
|
break;
|
|
case FLT_REG_FW:
|
|
if (IS_QLA8031(ha))
|
|
break;
|
|
ha->flt_region_fw = start;
|
|
break;
|
|
case FLT_REG_BOOT_CODE:
|
|
ha->flt_region_boot = start;
|
|
break;
|
|
case FLT_REG_VPD_0:
|
|
if (IS_QLA8031(ha))
|
|
break;
|
|
ha->flt_region_vpd_nvram = start;
|
|
if (IS_P3P_TYPE(ha))
|
|
break;
|
|
if (ha->port_no == 0)
|
|
ha->flt_region_vpd = start;
|
|
break;
|
|
case FLT_REG_VPD_1:
|
|
if (IS_P3P_TYPE(ha) || IS_QLA8031(ha))
|
|
break;
|
|
if (ha->port_no == 1)
|
|
ha->flt_region_vpd = start;
|
|
break;
|
|
case FLT_REG_VPD_2:
|
|
if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
|
|
break;
|
|
if (ha->port_no == 2)
|
|
ha->flt_region_vpd = start;
|
|
break;
|
|
case FLT_REG_VPD_3:
|
|
if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
|
|
break;
|
|
if (ha->port_no == 3)
|
|
ha->flt_region_vpd = start;
|
|
break;
|
|
case FLT_REG_NVRAM_0:
|
|
if (IS_QLA8031(ha))
|
|
break;
|
|
if (ha->port_no == 0)
|
|
ha->flt_region_nvram = start;
|
|
break;
|
|
case FLT_REG_NVRAM_1:
|
|
if (IS_QLA8031(ha))
|
|
break;
|
|
if (ha->port_no == 1)
|
|
ha->flt_region_nvram = start;
|
|
break;
|
|
case FLT_REG_NVRAM_2:
|
|
if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
|
|
break;
|
|
if (ha->port_no == 2)
|
|
ha->flt_region_nvram = start;
|
|
break;
|
|
case FLT_REG_NVRAM_3:
|
|
if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
|
|
break;
|
|
if (ha->port_no == 3)
|
|
ha->flt_region_nvram = start;
|
|
break;
|
|
case FLT_REG_FDT:
|
|
ha->flt_region_fdt = start;
|
|
break;
|
|
case FLT_REG_NPIV_CONF_0:
|
|
if (ha->port_no == 0)
|
|
ha->flt_region_npiv_conf = start;
|
|
break;
|
|
case FLT_REG_NPIV_CONF_1:
|
|
if (ha->port_no == 1)
|
|
ha->flt_region_npiv_conf = start;
|
|
break;
|
|
case FLT_REG_GOLD_FW:
|
|
ha->flt_region_gold_fw = start;
|
|
break;
|
|
case FLT_REG_FCP_PRIO_0:
|
|
if (ha->port_no == 0)
|
|
ha->flt_region_fcp_prio = start;
|
|
break;
|
|
case FLT_REG_FCP_PRIO_1:
|
|
if (ha->port_no == 1)
|
|
ha->flt_region_fcp_prio = start;
|
|
break;
|
|
case FLT_REG_BOOT_CODE_82XX:
|
|
ha->flt_region_boot = start;
|
|
break;
|
|
case FLT_REG_BOOT_CODE_8044:
|
|
if (IS_QLA8044(ha))
|
|
ha->flt_region_boot = start;
|
|
break;
|
|
case FLT_REG_FW_82XX:
|
|
ha->flt_region_fw = start;
|
|
break;
|
|
case FLT_REG_CNA_FW:
|
|
if (IS_CNA_CAPABLE(ha))
|
|
ha->flt_region_fw = start;
|
|
break;
|
|
case FLT_REG_GOLD_FW_82XX:
|
|
ha->flt_region_gold_fw = start;
|
|
break;
|
|
case FLT_REG_BOOTLOAD_82XX:
|
|
ha->flt_region_bootload = start;
|
|
break;
|
|
case FLT_REG_VPD_8XXX:
|
|
if (IS_CNA_CAPABLE(ha))
|
|
ha->flt_region_vpd = start;
|
|
break;
|
|
case FLT_REG_FCOE_NVRAM_0:
|
|
if (!(IS_QLA8031(ha) || IS_QLA8044(ha)))
|
|
break;
|
|
if (ha->port_no == 0)
|
|
ha->flt_region_nvram = start;
|
|
break;
|
|
case FLT_REG_FCOE_NVRAM_1:
|
|
if (!(IS_QLA8031(ha) || IS_QLA8044(ha)))
|
|
break;
|
|
if (ha->port_no == 1)
|
|
ha->flt_region_nvram = start;
|
|
break;
|
|
case FLT_REG_IMG_PRI_27XX:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
ha->flt_region_img_status_pri = start;
|
|
break;
|
|
case FLT_REG_IMG_SEC_27XX:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
ha->flt_region_img_status_sec = start;
|
|
break;
|
|
case FLT_REG_FW_SEC_27XX:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
ha->flt_region_fw_sec = start;
|
|
break;
|
|
case FLT_REG_BOOTLOAD_SEC_27XX:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
ha->flt_region_boot_sec = start;
|
|
break;
|
|
case FLT_REG_AUX_IMG_PRI_28XX:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
ha->flt_region_aux_img_status_pri = start;
|
|
break;
|
|
case FLT_REG_AUX_IMG_SEC_28XX:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
ha->flt_region_aux_img_status_sec = start;
|
|
break;
|
|
case FLT_REG_NVRAM_SEC_28XX_0:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
if (ha->port_no == 0)
|
|
ha->flt_region_nvram_sec = start;
|
|
break;
|
|
case FLT_REG_NVRAM_SEC_28XX_1:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
if (ha->port_no == 1)
|
|
ha->flt_region_nvram_sec = start;
|
|
break;
|
|
case FLT_REG_NVRAM_SEC_28XX_2:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
if (ha->port_no == 2)
|
|
ha->flt_region_nvram_sec = start;
|
|
break;
|
|
case FLT_REG_NVRAM_SEC_28XX_3:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
if (ha->port_no == 3)
|
|
ha->flt_region_nvram_sec = start;
|
|
break;
|
|
case FLT_REG_VPD_SEC_27XX_0:
|
|
case FLT_REG_VPD_SEC_28XX_0:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
|
|
ha->flt_region_vpd_nvram_sec = start;
|
|
if (ha->port_no == 0)
|
|
ha->flt_region_vpd_sec = start;
|
|
}
|
|
break;
|
|
case FLT_REG_VPD_SEC_27XX_1:
|
|
case FLT_REG_VPD_SEC_28XX_1:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
if (ha->port_no == 1)
|
|
ha->flt_region_vpd_sec = start;
|
|
break;
|
|
case FLT_REG_VPD_SEC_27XX_2:
|
|
case FLT_REG_VPD_SEC_28XX_2:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
if (ha->port_no == 2)
|
|
ha->flt_region_vpd_sec = start;
|
|
break;
|
|
case FLT_REG_VPD_SEC_27XX_3:
|
|
case FLT_REG_VPD_SEC_28XX_3:
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
if (ha->port_no == 3)
|
|
ha->flt_region_vpd_sec = start;
|
|
break;
|
|
}
|
|
}
|
|
goto done;
|
|
|
|
no_flash_data:
|
|
/* Use hardcoded defaults. */
|
|
loc = locations[0];
|
|
ha->flt_region_fw = def_fw[def];
|
|
ha->flt_region_boot = def_boot[def];
|
|
ha->flt_region_vpd_nvram = def_vpd_nvram[def];
|
|
ha->flt_region_vpd = (ha->port_no == 0) ?
|
|
def_vpd0[def] : def_vpd1[def];
|
|
ha->flt_region_nvram = (ha->port_no == 0) ?
|
|
def_nvram0[def] : def_nvram1[def];
|
|
ha->flt_region_fdt = def_fdt[def];
|
|
ha->flt_region_npiv_conf = (ha->port_no == 0) ?
|
|
def_npiv_conf0[def] : def_npiv_conf1[def];
|
|
done:
|
|
ql_dbg(ql_dbg_init, vha, 0x004a,
|
|
"FLT[%s]: boot=0x%x fw=0x%x vpd_nvram=0x%x vpd=0x%x nvram=0x%x "
|
|
"fdt=0x%x flt=0x%x npiv=0x%x fcp_prif_cfg=0x%x.\n",
|
|
loc, ha->flt_region_boot, ha->flt_region_fw,
|
|
ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram,
|
|
ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf,
|
|
ha->flt_region_fcp_prio);
|
|
}
|
|
|
|
static void
|
|
qla2xxx_get_fdt_info(scsi_qla_host_t *vha)
|
|
{
|
|
#define FLASH_BLK_SIZE_4K 0x1000
|
|
#define FLASH_BLK_SIZE_32K 0x8000
|
|
#define FLASH_BLK_SIZE_64K 0x10000
|
|
const char *loc, *locations[] = { "MID", "FDT" };
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct req_que *req = ha->req_q_map[0];
|
|
uint16_t cnt, chksum;
|
|
__le16 *wptr = (__force __le16 *)req->ring;
|
|
struct qla_fdt_layout *fdt = (struct qla_fdt_layout *)req->ring;
|
|
uint8_t man_id, flash_id;
|
|
uint16_t mid = 0, fid = 0;
|
|
|
|
ha->isp_ops->read_optrom(vha, fdt, ha->flt_region_fdt << 2,
|
|
OPTROM_BURST_DWORDS);
|
|
if (le16_to_cpu(*wptr) == 0xffff)
|
|
goto no_flash_data;
|
|
if (memcmp(fdt->sig, "QLID", 4))
|
|
goto no_flash_data;
|
|
|
|
for (cnt = 0, chksum = 0; cnt < sizeof(*fdt) >> 1; cnt++, wptr++)
|
|
chksum += le16_to_cpu(*wptr);
|
|
if (chksum) {
|
|
ql_dbg(ql_dbg_init, vha, 0x004c,
|
|
"Inconsistent FDT detected:"
|
|
" checksum=0x%x id=%c version0x%x.\n", chksum,
|
|
fdt->sig[0], le16_to_cpu(fdt->version));
|
|
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0113,
|
|
fdt, sizeof(*fdt));
|
|
goto no_flash_data;
|
|
}
|
|
|
|
loc = locations[1];
|
|
mid = le16_to_cpu(fdt->man_id);
|
|
fid = le16_to_cpu(fdt->id);
|
|
ha->fdt_wrt_disable = fdt->wrt_disable_bits;
|
|
ha->fdt_wrt_enable = fdt->wrt_enable_bits;
|
|
ha->fdt_wrt_sts_reg_cmd = fdt->wrt_sts_reg_cmd;
|
|
if (IS_QLA8044(ha))
|
|
ha->fdt_erase_cmd = fdt->erase_cmd;
|
|
else
|
|
ha->fdt_erase_cmd =
|
|
flash_conf_addr(ha, 0x0300 | fdt->erase_cmd);
|
|
ha->fdt_block_size = le32_to_cpu(fdt->block_size);
|
|
if (fdt->unprotect_sec_cmd) {
|
|
ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0300 |
|
|
fdt->unprotect_sec_cmd);
|
|
ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
|
|
flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd) :
|
|
flash_conf_addr(ha, 0x0336);
|
|
}
|
|
goto done;
|
|
no_flash_data:
|
|
loc = locations[0];
|
|
if (IS_P3P_TYPE(ha)) {
|
|
ha->fdt_block_size = FLASH_BLK_SIZE_64K;
|
|
goto done;
|
|
}
|
|
qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
|
|
mid = man_id;
|
|
fid = flash_id;
|
|
ha->fdt_wrt_disable = 0x9c;
|
|
ha->fdt_erase_cmd = flash_conf_addr(ha, 0x03d8);
|
|
switch (man_id) {
|
|
case 0xbf: /* STT flash. */
|
|
if (flash_id == 0x8e)
|
|
ha->fdt_block_size = FLASH_BLK_SIZE_64K;
|
|
else
|
|
ha->fdt_block_size = FLASH_BLK_SIZE_32K;
|
|
|
|
if (flash_id == 0x80)
|
|
ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0352);
|
|
break;
|
|
case 0x13: /* ST M25P80. */
|
|
ha->fdt_block_size = FLASH_BLK_SIZE_64K;
|
|
break;
|
|
case 0x1f: /* Atmel 26DF081A. */
|
|
ha->fdt_block_size = FLASH_BLK_SIZE_4K;
|
|
ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0320);
|
|
ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0339);
|
|
ha->fdt_protect_sec_cmd = flash_conf_addr(ha, 0x0336);
|
|
break;
|
|
default:
|
|
/* Default to 64 kb sector size. */
|
|
ha->fdt_block_size = FLASH_BLK_SIZE_64K;
|
|
break;
|
|
}
|
|
done:
|
|
ql_dbg(ql_dbg_init, vha, 0x004d,
|
|
"FDT[%s]: (0x%x/0x%x) erase=0x%x "
|
|
"pr=%x wrtd=0x%x blk=0x%x.\n",
|
|
loc, mid, fid,
|
|
ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd,
|
|
ha->fdt_wrt_disable, ha->fdt_block_size);
|
|
|
|
}
|
|
|
|
static void
|
|
qla2xxx_get_idc_param(scsi_qla_host_t *vha)
|
|
{
|
|
#define QLA82XX_IDC_PARAM_ADDR 0x003e885c
|
|
__le32 *wptr;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct req_que *req = ha->req_q_map[0];
|
|
|
|
if (!(IS_P3P_TYPE(ha)))
|
|
return;
|
|
|
|
wptr = (__force __le32 *)req->ring;
|
|
ha->isp_ops->read_optrom(vha, req->ring, QLA82XX_IDC_PARAM_ADDR, 8);
|
|
|
|
if (*wptr == cpu_to_le32(0xffffffff)) {
|
|
ha->fcoe_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT;
|
|
ha->fcoe_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT;
|
|
} else {
|
|
ha->fcoe_dev_init_timeout = le32_to_cpu(*wptr);
|
|
wptr++;
|
|
ha->fcoe_reset_timeout = le32_to_cpu(*wptr);
|
|
}
|
|
ql_dbg(ql_dbg_init, vha, 0x004e,
|
|
"fcoe_dev_init_timeout=%d "
|
|
"fcoe_reset_timeout=%d.\n", ha->fcoe_dev_init_timeout,
|
|
ha->fcoe_reset_timeout);
|
|
return;
|
|
}
|
|
|
|
int
|
|
qla2xxx_get_flash_info(scsi_qla_host_t *vha)
|
|
{
|
|
int ret;
|
|
uint32_t flt_addr;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
|
|
!IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha) &&
|
|
!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
|
|
return QLA_SUCCESS;
|
|
|
|
ret = qla2xxx_find_flt_start(vha, &flt_addr);
|
|
if (ret != QLA_SUCCESS)
|
|
return ret;
|
|
|
|
qla2xxx_get_flt_info(vha, flt_addr);
|
|
qla2xxx_get_fdt_info(vha);
|
|
qla2xxx_get_idc_param(vha);
|
|
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
void
|
|
qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
|
|
{
|
|
#define NPIV_CONFIG_SIZE (16*1024)
|
|
void *data;
|
|
__le16 *wptr;
|
|
uint16_t cnt, chksum;
|
|
int i;
|
|
struct qla_npiv_header hdr;
|
|
struct qla_npiv_entry *entry;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
|
|
!IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha))
|
|
return;
|
|
|
|
if (ha->flags.nic_core_reset_hdlr_active)
|
|
return;
|
|
|
|
if (IS_QLA8044(ha))
|
|
return;
|
|
|
|
ha->isp_ops->read_optrom(vha, &hdr, ha->flt_region_npiv_conf << 2,
|
|
sizeof(struct qla_npiv_header));
|
|
if (hdr.version == cpu_to_le16(0xffff))
|
|
return;
|
|
if (hdr.version != cpu_to_le16(1)) {
|
|
ql_dbg(ql_dbg_user, vha, 0x7090,
|
|
"Unsupported NPIV-Config "
|
|
"detected: version=0x%x entries=0x%x checksum=0x%x.\n",
|
|
le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
|
|
le16_to_cpu(hdr.checksum));
|
|
return;
|
|
}
|
|
|
|
data = kmalloc(NPIV_CONFIG_SIZE, GFP_KERNEL);
|
|
if (!data) {
|
|
ql_log(ql_log_warn, vha, 0x7091,
|
|
"Unable to allocate memory for data.\n");
|
|
return;
|
|
}
|
|
|
|
ha->isp_ops->read_optrom(vha, data, ha->flt_region_npiv_conf << 2,
|
|
NPIV_CONFIG_SIZE);
|
|
|
|
cnt = (sizeof(hdr) + le16_to_cpu(hdr.entries) * sizeof(*entry)) >> 1;
|
|
for (wptr = data, chksum = 0; cnt--; wptr++)
|
|
chksum += le16_to_cpu(*wptr);
|
|
if (chksum) {
|
|
ql_dbg(ql_dbg_user, vha, 0x7092,
|
|
"Inconsistent NPIV-Config "
|
|
"detected: version=0x%x entries=0x%x checksum=0x%x.\n",
|
|
le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
|
|
le16_to_cpu(hdr.checksum));
|
|
goto done;
|
|
}
|
|
|
|
entry = data + sizeof(struct qla_npiv_header);
|
|
cnt = le16_to_cpu(hdr.entries);
|
|
for (i = 0; cnt; cnt--, entry++, i++) {
|
|
uint16_t flags;
|
|
struct fc_vport_identifiers vid;
|
|
struct fc_vport *vport;
|
|
|
|
memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
|
|
|
|
flags = le16_to_cpu(entry->flags);
|
|
if (flags == 0xffff)
|
|
continue;
|
|
if ((flags & BIT_0) == 0)
|
|
continue;
|
|
|
|
memset(&vid, 0, sizeof(vid));
|
|
vid.roles = FC_PORT_ROLE_FCP_INITIATOR;
|
|
vid.vport_type = FC_PORTTYPE_NPIV;
|
|
vid.disable = false;
|
|
vid.port_name = wwn_to_u64(entry->port_name);
|
|
vid.node_name = wwn_to_u64(entry->node_name);
|
|
|
|
ql_dbg(ql_dbg_user, vha, 0x7093,
|
|
"NPIV[%02x]: wwpn=%llx wwnn=%llx vf_id=%#x Q_qos=%#x F_qos=%#x.\n",
|
|
cnt, vid.port_name, vid.node_name,
|
|
le16_to_cpu(entry->vf_id),
|
|
entry->q_qos, entry->f_qos);
|
|
|
|
if (i < QLA_PRECONFIG_VPORTS) {
|
|
vport = fc_vport_create(vha->host, 0, &vid);
|
|
if (!vport)
|
|
ql_log(ql_log_warn, vha, 0x7094,
|
|
"NPIV-Config Failed to create vport [%02x]: wwpn=%llx wwnn=%llx.\n",
|
|
cnt, vid.port_name, vid.node_name);
|
|
}
|
|
}
|
|
done:
|
|
kfree(data);
|
|
}
|
|
|
|
static int
|
|
qla24xx_unprotect_flash(scsi_qla_host_t *vha)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
|
|
if (ha->flags.fac_supported)
|
|
return qla81xx_fac_do_write_enable(vha, 1);
|
|
|
|
/* Enable flash write. */
|
|
wrt_reg_dword(®->ctrl_status,
|
|
rd_reg_dword(®->ctrl_status) | CSRX_FLASH_ENABLE);
|
|
rd_reg_dword(®->ctrl_status); /* PCI Posting. */
|
|
|
|
if (!ha->fdt_wrt_disable)
|
|
goto done;
|
|
|
|
/* Disable flash write-protection, first clear SR protection bit */
|
|
qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
|
|
/* Then write zero again to clear remaining SR bits.*/
|
|
qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
|
|
done:
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
static int
|
|
qla24xx_protect_flash(scsi_qla_host_t *vha)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
ulong cnt = 300;
|
|
uint32_t faddr, dword;
|
|
|
|
if (ha->flags.fac_supported)
|
|
return qla81xx_fac_do_write_enable(vha, 0);
|
|
|
|
if (!ha->fdt_wrt_disable)
|
|
goto skip_wrt_protect;
|
|
|
|
/* Enable flash write-protection and wait for completion. */
|
|
faddr = flash_conf_addr(ha, 0x101);
|
|
qla24xx_write_flash_dword(ha, faddr, ha->fdt_wrt_disable);
|
|
faddr = flash_conf_addr(ha, 0x5);
|
|
while (cnt--) {
|
|
if (!qla24xx_read_flash_dword(ha, faddr, &dword)) {
|
|
if (!(dword & BIT_0))
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
skip_wrt_protect:
|
|
/* Disable flash write. */
|
|
wrt_reg_dword(®->ctrl_status,
|
|
rd_reg_dword(®->ctrl_status) & ~CSRX_FLASH_ENABLE);
|
|
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
static int
|
|
qla24xx_erase_sector(scsi_qla_host_t *vha, uint32_t fdata)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
uint32_t start, finish;
|
|
|
|
if (ha->flags.fac_supported) {
|
|
start = fdata >> 2;
|
|
finish = start + (ha->fdt_block_size >> 2) - 1;
|
|
return qla81xx_fac_erase_sector(vha, flash_data_addr(ha,
|
|
start), flash_data_addr(ha, finish));
|
|
}
|
|
|
|
return qla24xx_write_flash_dword(ha, ha->fdt_erase_cmd,
|
|
(fdata & 0xff00) | ((fdata << 16) & 0xff0000) |
|
|
((fdata >> 16) & 0xff));
|
|
}
|
|
|
|
static int
|
|
qla24xx_write_flash_data(scsi_qla_host_t *vha, __le32 *dwptr, uint32_t faddr,
|
|
uint32_t dwords)
|
|
{
|
|
int ret;
|
|
ulong liter;
|
|
ulong dburst = OPTROM_BURST_DWORDS; /* burst size in dwords */
|
|
uint32_t sec_mask, rest_addr, fdata;
|
|
dma_addr_t optrom_dma;
|
|
void *optrom = NULL;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
|
|
!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
|
|
goto next;
|
|
|
|
/* Allocate dma buffer for burst write */
|
|
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
|
|
&optrom_dma, GFP_KERNEL);
|
|
if (!optrom) {
|
|
ql_log(ql_log_warn, vha, 0x7095,
|
|
"Failed allocate burst (%x bytes)\n", OPTROM_BURST_SIZE);
|
|
}
|
|
|
|
next:
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
|
|
"Unprotect flash...\n");
|
|
ret = qla24xx_unprotect_flash(vha);
|
|
if (ret) {
|
|
ql_log(ql_log_warn, vha, 0x7096,
|
|
"Failed to unprotect flash.\n");
|
|
goto done;
|
|
}
|
|
|
|
rest_addr = (ha->fdt_block_size >> 2) - 1;
|
|
sec_mask = ~rest_addr;
|
|
for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
|
|
fdata = (faddr & sec_mask) << 2;
|
|
|
|
/* Are we at the beginning of a sector? */
|
|
if (!(faddr & rest_addr)) {
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
|
|
"Erase sector %#x...\n", faddr);
|
|
|
|
ret = qla24xx_erase_sector(vha, fdata);
|
|
if (ret) {
|
|
ql_dbg(ql_dbg_user, vha, 0x7007,
|
|
"Failed to erase sector %x.\n", faddr);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (optrom) {
|
|
/* If smaller than a burst remaining */
|
|
if (dwords - liter < dburst)
|
|
dburst = dwords - liter;
|
|
|
|
/* Copy to dma buffer */
|
|
memcpy(optrom, dwptr, dburst << 2);
|
|
|
|
/* Burst write */
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
|
|
"Write burst (%#lx dwords)...\n", dburst);
|
|
ret = qla2x00_load_ram(vha, optrom_dma,
|
|
flash_data_addr(ha, faddr), dburst);
|
|
if (!ret) {
|
|
liter += dburst - 1;
|
|
faddr += dburst - 1;
|
|
dwptr += dburst - 1;
|
|
continue;
|
|
}
|
|
|
|
ql_log(ql_log_warn, vha, 0x7097,
|
|
"Failed burst-write at %x (%p/%#llx)....\n",
|
|
flash_data_addr(ha, faddr), optrom,
|
|
(u64)optrom_dma);
|
|
|
|
dma_free_coherent(&ha->pdev->dev,
|
|
OPTROM_BURST_SIZE, optrom, optrom_dma);
|
|
optrom = NULL;
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
break;
|
|
ql_log(ql_log_warn, vha, 0x7098,
|
|
"Reverting to slow write...\n");
|
|
}
|
|
|
|
/* Slow write */
|
|
ret = qla24xx_write_flash_dword(ha,
|
|
flash_data_addr(ha, faddr), le32_to_cpu(*dwptr));
|
|
if (ret) {
|
|
ql_dbg(ql_dbg_user, vha, 0x7006,
|
|
"Failed slow write %x (%x)\n", faddr, *dwptr);
|
|
break;
|
|
}
|
|
}
|
|
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
|
|
"Protect flash...\n");
|
|
ret = qla24xx_protect_flash(vha);
|
|
if (ret)
|
|
ql_log(ql_log_warn, vha, 0x7099,
|
|
"Failed to protect flash\n");
|
|
done:
|
|
if (optrom)
|
|
dma_free_coherent(&ha->pdev->dev,
|
|
OPTROM_BURST_SIZE, optrom, optrom_dma);
|
|
|
|
return ret;
|
|
}
|
|
|
|
uint8_t *
|
|
qla2x00_read_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
|
|
uint32_t bytes)
|
|
{
|
|
uint32_t i;
|
|
__le16 *wptr;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
/* Word reads to NVRAM via registers. */
|
|
wptr = buf;
|
|
qla2x00_lock_nvram_access(ha);
|
|
for (i = 0; i < bytes >> 1; i++, naddr++)
|
|
wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
|
|
naddr));
|
|
qla2x00_unlock_nvram_access(ha);
|
|
|
|
return buf;
|
|
}
|
|
|
|
uint8_t *
|
|
qla24xx_read_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
|
|
uint32_t bytes)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
uint32_t *dwptr = buf;
|
|
uint32_t i;
|
|
|
|
if (IS_P3P_TYPE(ha))
|
|
return buf;
|
|
|
|
/* Dword reads to flash. */
|
|
naddr = nvram_data_addr(ha, naddr);
|
|
bytes >>= 2;
|
|
for (i = 0; i < bytes; i++, naddr++, dwptr++) {
|
|
if (qla24xx_read_flash_dword(ha, naddr, dwptr))
|
|
break;
|
|
cpu_to_le32s(dwptr);
|
|
}
|
|
|
|
return buf;
|
|
}
|
|
|
|
int
|
|
qla2x00_write_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
|
|
uint32_t bytes)
|
|
{
|
|
int ret, stat;
|
|
uint32_t i;
|
|
uint16_t *wptr;
|
|
unsigned long flags;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
ret = QLA_SUCCESS;
|
|
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
qla2x00_lock_nvram_access(ha);
|
|
|
|
/* Disable NVRAM write-protection. */
|
|
stat = qla2x00_clear_nvram_protection(ha);
|
|
|
|
wptr = (uint16_t *)buf;
|
|
for (i = 0; i < bytes >> 1; i++, naddr++) {
|
|
qla2x00_write_nvram_word(ha, naddr,
|
|
cpu_to_le16(*wptr));
|
|
wptr++;
|
|
}
|
|
|
|
/* Enable NVRAM write-protection. */
|
|
qla2x00_set_nvram_protection(ha, stat);
|
|
|
|
qla2x00_unlock_nvram_access(ha);
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
qla24xx_write_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
|
|
uint32_t bytes)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
__le32 *dwptr = buf;
|
|
uint32_t i;
|
|
int ret;
|
|
|
|
ret = QLA_SUCCESS;
|
|
|
|
if (IS_P3P_TYPE(ha))
|
|
return ret;
|
|
|
|
/* Enable flash write. */
|
|
wrt_reg_dword(®->ctrl_status,
|
|
rd_reg_dword(®->ctrl_status) | CSRX_FLASH_ENABLE);
|
|
rd_reg_dword(®->ctrl_status); /* PCI Posting. */
|
|
|
|
/* Disable NVRAM write-protection. */
|
|
qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
|
|
qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
|
|
|
|
/* Dword writes to flash. */
|
|
naddr = nvram_data_addr(ha, naddr);
|
|
bytes >>= 2;
|
|
for (i = 0; i < bytes; i++, naddr++, dwptr++) {
|
|
if (qla24xx_write_flash_dword(ha, naddr, le32_to_cpu(*dwptr))) {
|
|
ql_dbg(ql_dbg_user, vha, 0x709a,
|
|
"Unable to program nvram address=%x data=%x.\n",
|
|
naddr, *dwptr);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Enable NVRAM write-protection. */
|
|
qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0x8c);
|
|
|
|
/* Disable flash write. */
|
|
wrt_reg_dword(®->ctrl_status,
|
|
rd_reg_dword(®->ctrl_status) & ~CSRX_FLASH_ENABLE);
|
|
rd_reg_dword(®->ctrl_status); /* PCI Posting. */
|
|
|
|
return ret;
|
|
}
|
|
|
|
uint8_t *
|
|
qla25xx_read_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
|
|
uint32_t bytes)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
uint32_t *dwptr = buf;
|
|
uint32_t i;
|
|
|
|
/* Dword reads to flash. */
|
|
naddr = flash_data_addr(ha, ha->flt_region_vpd_nvram | naddr);
|
|
bytes >>= 2;
|
|
for (i = 0; i < bytes; i++, naddr++, dwptr++) {
|
|
if (qla24xx_read_flash_dword(ha, naddr, dwptr))
|
|
break;
|
|
|
|
cpu_to_le32s(dwptr);
|
|
}
|
|
|
|
return buf;
|
|
}
|
|
|
|
#define RMW_BUFFER_SIZE (64 * 1024)
|
|
int
|
|
qla25xx_write_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
|
|
uint32_t bytes)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
uint8_t *dbuf = vmalloc(RMW_BUFFER_SIZE);
|
|
|
|
if (!dbuf)
|
|
return QLA_MEMORY_ALLOC_FAILED;
|
|
ha->isp_ops->read_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
|
|
RMW_BUFFER_SIZE);
|
|
memcpy(dbuf + (naddr << 2), buf, bytes);
|
|
ha->isp_ops->write_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
|
|
RMW_BUFFER_SIZE);
|
|
vfree(dbuf);
|
|
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
static inline void
|
|
qla2x00_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
|
|
{
|
|
if (IS_QLA2322(ha)) {
|
|
/* Flip all colors. */
|
|
if (ha->beacon_color_state == QLA_LED_ALL_ON) {
|
|
/* Turn off. */
|
|
ha->beacon_color_state = 0;
|
|
*pflags = GPIO_LED_ALL_OFF;
|
|
} else {
|
|
/* Turn on. */
|
|
ha->beacon_color_state = QLA_LED_ALL_ON;
|
|
*pflags = GPIO_LED_RGA_ON;
|
|
}
|
|
} else {
|
|
/* Flip green led only. */
|
|
if (ha->beacon_color_state == QLA_LED_GRN_ON) {
|
|
/* Turn off. */
|
|
ha->beacon_color_state = 0;
|
|
*pflags = GPIO_LED_GREEN_OFF_AMBER_OFF;
|
|
} else {
|
|
/* Turn on. */
|
|
ha->beacon_color_state = QLA_LED_GRN_ON;
|
|
*pflags = GPIO_LED_GREEN_ON_AMBER_OFF;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define PIO_REG(h, r) ((h)->pio_address + offsetof(struct device_reg_2xxx, r))
|
|
|
|
void
|
|
qla2x00_beacon_blink(struct scsi_qla_host *vha)
|
|
{
|
|
uint16_t gpio_enable;
|
|
uint16_t gpio_data;
|
|
uint16_t led_color = 0;
|
|
unsigned long flags;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
if (IS_P3P_TYPE(ha))
|
|
return;
|
|
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
|
|
/* Save the Original GPIOE. */
|
|
if (ha->pio_address) {
|
|
gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
|
|
gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
|
|
} else {
|
|
gpio_enable = rd_reg_word(®->gpioe);
|
|
gpio_data = rd_reg_word(®->gpiod);
|
|
}
|
|
|
|
/* Set the modified gpio_enable values */
|
|
gpio_enable |= GPIO_LED_MASK;
|
|
|
|
if (ha->pio_address) {
|
|
WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
|
|
} else {
|
|
wrt_reg_word(®->gpioe, gpio_enable);
|
|
rd_reg_word(®->gpioe);
|
|
}
|
|
|
|
qla2x00_flip_colors(ha, &led_color);
|
|
|
|
/* Clear out any previously set LED color. */
|
|
gpio_data &= ~GPIO_LED_MASK;
|
|
|
|
/* Set the new input LED color to GPIOD. */
|
|
gpio_data |= led_color;
|
|
|
|
/* Set the modified gpio_data values */
|
|
if (ha->pio_address) {
|
|
WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
|
|
} else {
|
|
wrt_reg_word(®->gpiod, gpio_data);
|
|
rd_reg_word(®->gpiod);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
}
|
|
|
|
int
|
|
qla2x00_beacon_on(struct scsi_qla_host *vha)
|
|
{
|
|
uint16_t gpio_enable;
|
|
uint16_t gpio_data;
|
|
unsigned long flags;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
|
|
ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
|
|
|
|
if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0x709b,
|
|
"Unable to update fw options (beacon on).\n");
|
|
return QLA_FUNCTION_FAILED;
|
|
}
|
|
|
|
/* Turn off LEDs. */
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
if (ha->pio_address) {
|
|
gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
|
|
gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
|
|
} else {
|
|
gpio_enable = rd_reg_word(®->gpioe);
|
|
gpio_data = rd_reg_word(®->gpiod);
|
|
}
|
|
gpio_enable |= GPIO_LED_MASK;
|
|
|
|
/* Set the modified gpio_enable values. */
|
|
if (ha->pio_address) {
|
|
WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
|
|
} else {
|
|
wrt_reg_word(®->gpioe, gpio_enable);
|
|
rd_reg_word(®->gpioe);
|
|
}
|
|
|
|
/* Clear out previously set LED colour. */
|
|
gpio_data &= ~GPIO_LED_MASK;
|
|
if (ha->pio_address) {
|
|
WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
|
|
} else {
|
|
wrt_reg_word(®->gpiod, gpio_data);
|
|
rd_reg_word(®->gpiod);
|
|
}
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
|
|
/*
|
|
* Let the per HBA timer kick off the blinking process based on
|
|
* the following flags. No need to do anything else now.
|
|
*/
|
|
ha->beacon_blink_led = 1;
|
|
ha->beacon_color_state = 0;
|
|
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
int
|
|
qla2x00_beacon_off(struct scsi_qla_host *vha)
|
|
{
|
|
int rval = QLA_SUCCESS;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
ha->beacon_blink_led = 0;
|
|
|
|
/* Set the on flag so when it gets flipped it will be off. */
|
|
if (IS_QLA2322(ha))
|
|
ha->beacon_color_state = QLA_LED_ALL_ON;
|
|
else
|
|
ha->beacon_color_state = QLA_LED_GRN_ON;
|
|
|
|
ha->isp_ops->beacon_blink(vha); /* This turns green LED off */
|
|
|
|
ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
|
|
ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
|
|
|
|
rval = qla2x00_set_fw_options(vha, ha->fw_options);
|
|
if (rval != QLA_SUCCESS)
|
|
ql_log(ql_log_warn, vha, 0x709c,
|
|
"Unable to update fw options (beacon off).\n");
|
|
return rval;
|
|
}
|
|
|
|
|
|
static inline void
|
|
qla24xx_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
|
|
{
|
|
/* Flip all colors. */
|
|
if (ha->beacon_color_state == QLA_LED_ALL_ON) {
|
|
/* Turn off. */
|
|
ha->beacon_color_state = 0;
|
|
*pflags = 0;
|
|
} else {
|
|
/* Turn on. */
|
|
ha->beacon_color_state = QLA_LED_ALL_ON;
|
|
*pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON;
|
|
}
|
|
}
|
|
|
|
void
|
|
qla24xx_beacon_blink(struct scsi_qla_host *vha)
|
|
{
|
|
uint16_t led_color = 0;
|
|
uint32_t gpio_data;
|
|
unsigned long flags;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
|
|
/* Save the Original GPIOD. */
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
gpio_data = rd_reg_dword(®->gpiod);
|
|
|
|
/* Enable the gpio_data reg for update. */
|
|
gpio_data |= GPDX_LED_UPDATE_MASK;
|
|
|
|
wrt_reg_dword(®->gpiod, gpio_data);
|
|
gpio_data = rd_reg_dword(®->gpiod);
|
|
|
|
/* Set the color bits. */
|
|
qla24xx_flip_colors(ha, &led_color);
|
|
|
|
/* Clear out any previously set LED color. */
|
|
gpio_data &= ~GPDX_LED_COLOR_MASK;
|
|
|
|
/* Set the new input LED color to GPIOD. */
|
|
gpio_data |= led_color;
|
|
|
|
/* Set the modified gpio_data values. */
|
|
wrt_reg_dword(®->gpiod, gpio_data);
|
|
gpio_data = rd_reg_dword(®->gpiod);
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
}
|
|
|
|
static uint32_t
|
|
qla83xx_select_led_port(struct qla_hw_data *ha)
|
|
{
|
|
uint32_t led_select_value = 0;
|
|
|
|
if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
|
|
goto out;
|
|
|
|
if (ha->port_no == 0)
|
|
led_select_value = QLA83XX_LED_PORT0;
|
|
else
|
|
led_select_value = QLA83XX_LED_PORT1;
|
|
|
|
out:
|
|
return led_select_value;
|
|
}
|
|
|
|
void
|
|
qla83xx_beacon_blink(struct scsi_qla_host *vha)
|
|
{
|
|
uint32_t led_select_value;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
uint16_t led_cfg[6];
|
|
uint16_t orig_led_cfg[6];
|
|
uint32_t led_10_value, led_43_value;
|
|
|
|
if (!IS_QLA83XX(ha) && !IS_QLA81XX(ha) && !IS_QLA27XX(ha) &&
|
|
!IS_QLA28XX(ha))
|
|
return;
|
|
|
|
if (!ha->beacon_blink_led)
|
|
return;
|
|
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
|
|
qla2x00_write_ram_word(vha, 0x1003, 0x40000230);
|
|
qla2x00_write_ram_word(vha, 0x1004, 0x40000230);
|
|
} else if (IS_QLA2031(ha)) {
|
|
led_select_value = qla83xx_select_led_port(ha);
|
|
|
|
qla83xx_wr_reg(vha, led_select_value, 0x40000230);
|
|
qla83xx_wr_reg(vha, led_select_value + 4, 0x40000230);
|
|
} else if (IS_QLA8031(ha)) {
|
|
led_select_value = qla83xx_select_led_port(ha);
|
|
|
|
qla83xx_rd_reg(vha, led_select_value, &led_10_value);
|
|
qla83xx_rd_reg(vha, led_select_value + 0x10, &led_43_value);
|
|
qla83xx_wr_reg(vha, led_select_value, 0x01f44000);
|
|
msleep(500);
|
|
qla83xx_wr_reg(vha, led_select_value, 0x400001f4);
|
|
msleep(1000);
|
|
qla83xx_wr_reg(vha, led_select_value, led_10_value);
|
|
qla83xx_wr_reg(vha, led_select_value + 0x10, led_43_value);
|
|
} else if (IS_QLA81XX(ha)) {
|
|
int rval;
|
|
|
|
/* Save Current */
|
|
rval = qla81xx_get_led_config(vha, orig_led_cfg);
|
|
/* Do the blink */
|
|
if (rval == QLA_SUCCESS) {
|
|
if (IS_QLA81XX(ha)) {
|
|
led_cfg[0] = 0x4000;
|
|
led_cfg[1] = 0x2000;
|
|
led_cfg[2] = 0;
|
|
led_cfg[3] = 0;
|
|
led_cfg[4] = 0;
|
|
led_cfg[5] = 0;
|
|
} else {
|
|
led_cfg[0] = 0x4000;
|
|
led_cfg[1] = 0x4000;
|
|
led_cfg[2] = 0x4000;
|
|
led_cfg[3] = 0x2000;
|
|
led_cfg[4] = 0;
|
|
led_cfg[5] = 0x2000;
|
|
}
|
|
rval = qla81xx_set_led_config(vha, led_cfg);
|
|
msleep(1000);
|
|
if (IS_QLA81XX(ha)) {
|
|
led_cfg[0] = 0x4000;
|
|
led_cfg[1] = 0x2000;
|
|
led_cfg[2] = 0;
|
|
} else {
|
|
led_cfg[0] = 0x4000;
|
|
led_cfg[1] = 0x2000;
|
|
led_cfg[2] = 0x4000;
|
|
led_cfg[3] = 0x4000;
|
|
led_cfg[4] = 0;
|
|
led_cfg[5] = 0x2000;
|
|
}
|
|
rval = qla81xx_set_led_config(vha, led_cfg);
|
|
}
|
|
/* On exit, restore original (presumes no status change) */
|
|
qla81xx_set_led_config(vha, orig_led_cfg);
|
|
}
|
|
}
|
|
|
|
int
|
|
qla24xx_beacon_on(struct scsi_qla_host *vha)
|
|
{
|
|
uint32_t gpio_data;
|
|
unsigned long flags;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
|
|
if (IS_P3P_TYPE(ha))
|
|
return QLA_SUCCESS;
|
|
|
|
if (IS_QLA8031(ha) || IS_QLA81XX(ha))
|
|
goto skip_gpio; /* let blink handle it */
|
|
|
|
if (ha->beacon_blink_led == 0) {
|
|
/* Enable firmware for update */
|
|
ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
|
|
|
|
if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS)
|
|
return QLA_FUNCTION_FAILED;
|
|
|
|
if (qla2x00_get_fw_options(vha, ha->fw_options) !=
|
|
QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0x7009,
|
|
"Unable to update fw options (beacon on).\n");
|
|
return QLA_FUNCTION_FAILED;
|
|
}
|
|
|
|
if (IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
goto skip_gpio;
|
|
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
gpio_data = rd_reg_dword(®->gpiod);
|
|
|
|
/* Enable the gpio_data reg for update. */
|
|
gpio_data |= GPDX_LED_UPDATE_MASK;
|
|
wrt_reg_dword(®->gpiod, gpio_data);
|
|
rd_reg_dword(®->gpiod);
|
|
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
}
|
|
|
|
/* So all colors blink together. */
|
|
ha->beacon_color_state = 0;
|
|
|
|
skip_gpio:
|
|
/* Let the per HBA timer kick off the blinking process. */
|
|
ha->beacon_blink_led = 1;
|
|
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
int
|
|
qla24xx_beacon_off(struct scsi_qla_host *vha)
|
|
{
|
|
uint32_t gpio_data;
|
|
unsigned long flags;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
|
|
|
|
if (IS_P3P_TYPE(ha))
|
|
return QLA_SUCCESS;
|
|
|
|
if (!ha->flags.fw_started)
|
|
return QLA_SUCCESS;
|
|
|
|
ha->beacon_blink_led = 0;
|
|
|
|
if (IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
goto set_fw_options;
|
|
|
|
if (IS_QLA8031(ha) || IS_QLA81XX(ha))
|
|
return QLA_SUCCESS;
|
|
|
|
ha->beacon_color_state = QLA_LED_ALL_ON;
|
|
|
|
ha->isp_ops->beacon_blink(vha); /* Will flip to all off. */
|
|
|
|
/* Give control back to firmware. */
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
gpio_data = rd_reg_dword(®->gpiod);
|
|
|
|
/* Disable the gpio_data reg for update. */
|
|
gpio_data &= ~GPDX_LED_UPDATE_MASK;
|
|
wrt_reg_dword(®->gpiod, gpio_data);
|
|
rd_reg_dword(®->gpiod);
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
|
|
set_fw_options:
|
|
ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
|
|
|
|
if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0x704d,
|
|
"Unable to update fw options (beacon on).\n");
|
|
return QLA_FUNCTION_FAILED;
|
|
}
|
|
|
|
if (qla2x00_get_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0x704e,
|
|
"Unable to update fw options (beacon on).\n");
|
|
return QLA_FUNCTION_FAILED;
|
|
}
|
|
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
|
|
/*
|
|
* Flash support routines
|
|
*/
|
|
|
|
/**
|
|
* qla2x00_flash_enable() - Setup flash for reading and writing.
|
|
* @ha: HA context
|
|
*/
|
|
static void
|
|
qla2x00_flash_enable(struct qla_hw_data *ha)
|
|
{
|
|
uint16_t data;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
data = rd_reg_word(®->ctrl_status);
|
|
data |= CSR_FLASH_ENABLE;
|
|
wrt_reg_word(®->ctrl_status, data);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
}
|
|
|
|
/**
|
|
* qla2x00_flash_disable() - Disable flash and allow RISC to run.
|
|
* @ha: HA context
|
|
*/
|
|
static void
|
|
qla2x00_flash_disable(struct qla_hw_data *ha)
|
|
{
|
|
uint16_t data;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
data = rd_reg_word(®->ctrl_status);
|
|
data &= ~(CSR_FLASH_ENABLE);
|
|
wrt_reg_word(®->ctrl_status, data);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
}
|
|
|
|
/**
|
|
* qla2x00_read_flash_byte() - Reads a byte from flash
|
|
* @ha: HA context
|
|
* @addr: Address in flash to read
|
|
*
|
|
* A word is read from the chip, but, only the lower byte is valid.
|
|
*
|
|
* Returns the byte read from flash @addr.
|
|
*/
|
|
static uint8_t
|
|
qla2x00_read_flash_byte(struct qla_hw_data *ha, uint32_t addr)
|
|
{
|
|
uint16_t data;
|
|
uint16_t bank_select;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
bank_select = rd_reg_word(®->ctrl_status);
|
|
|
|
if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
|
|
/* Specify 64K address range: */
|
|
/* clear out Module Select and Flash Address bits [19:16]. */
|
|
bank_select &= ~0xf8;
|
|
bank_select |= addr >> 12 & 0xf0;
|
|
bank_select |= CSR_FLASH_64K_BANK;
|
|
wrt_reg_word(®->ctrl_status, bank_select);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
|
|
wrt_reg_word(®->flash_address, (uint16_t)addr);
|
|
data = rd_reg_word(®->flash_data);
|
|
|
|
return (uint8_t)data;
|
|
}
|
|
|
|
/* Setup bit 16 of flash address. */
|
|
if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
|
|
bank_select |= CSR_FLASH_64K_BANK;
|
|
wrt_reg_word(®->ctrl_status, bank_select);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
} else if (((addr & BIT_16) == 0) &&
|
|
(bank_select & CSR_FLASH_64K_BANK)) {
|
|
bank_select &= ~(CSR_FLASH_64K_BANK);
|
|
wrt_reg_word(®->ctrl_status, bank_select);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
}
|
|
|
|
/* Always perform IO mapped accesses to the FLASH registers. */
|
|
if (ha->pio_address) {
|
|
uint16_t data2;
|
|
|
|
WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
|
|
do {
|
|
data = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
|
|
barrier();
|
|
cpu_relax();
|
|
data2 = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
|
|
} while (data != data2);
|
|
} else {
|
|
wrt_reg_word(®->flash_address, (uint16_t)addr);
|
|
data = qla2x00_debounce_register(®->flash_data);
|
|
}
|
|
|
|
return (uint8_t)data;
|
|
}
|
|
|
|
/**
|
|
* qla2x00_write_flash_byte() - Write a byte to flash
|
|
* @ha: HA context
|
|
* @addr: Address in flash to write
|
|
* @data: Data to write
|
|
*/
|
|
static void
|
|
qla2x00_write_flash_byte(struct qla_hw_data *ha, uint32_t addr, uint8_t data)
|
|
{
|
|
uint16_t bank_select;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
bank_select = rd_reg_word(®->ctrl_status);
|
|
if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
|
|
/* Specify 64K address range: */
|
|
/* clear out Module Select and Flash Address bits [19:16]. */
|
|
bank_select &= ~0xf8;
|
|
bank_select |= addr >> 12 & 0xf0;
|
|
bank_select |= CSR_FLASH_64K_BANK;
|
|
wrt_reg_word(®->ctrl_status, bank_select);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
|
|
wrt_reg_word(®->flash_address, (uint16_t)addr);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
wrt_reg_word(®->flash_data, (uint16_t)data);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
|
|
return;
|
|
}
|
|
|
|
/* Setup bit 16 of flash address. */
|
|
if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
|
|
bank_select |= CSR_FLASH_64K_BANK;
|
|
wrt_reg_word(®->ctrl_status, bank_select);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
} else if (((addr & BIT_16) == 0) &&
|
|
(bank_select & CSR_FLASH_64K_BANK)) {
|
|
bank_select &= ~(CSR_FLASH_64K_BANK);
|
|
wrt_reg_word(®->ctrl_status, bank_select);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
}
|
|
|
|
/* Always perform IO mapped accesses to the FLASH registers. */
|
|
if (ha->pio_address) {
|
|
WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
|
|
WRT_REG_WORD_PIO(PIO_REG(ha, flash_data), (uint16_t)data);
|
|
} else {
|
|
wrt_reg_word(®->flash_address, (uint16_t)addr);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
wrt_reg_word(®->flash_data, (uint16_t)data);
|
|
rd_reg_word(®->ctrl_status); /* PCI Posting. */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* qla2x00_poll_flash() - Polls flash for completion.
|
|
* @ha: HA context
|
|
* @addr: Address in flash to poll
|
|
* @poll_data: Data to be polled
|
|
* @man_id: Flash manufacturer ID
|
|
* @flash_id: Flash ID
|
|
*
|
|
* This function polls the device until bit 7 of what is read matches data
|
|
* bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed
|
|
* out (a fatal error). The flash book recommeds reading bit 7 again after
|
|
* reading bit 5 as a 1.
|
|
*
|
|
* Returns 0 on success, else non-zero.
|
|
*/
|
|
static int
|
|
qla2x00_poll_flash(struct qla_hw_data *ha, uint32_t addr, uint8_t poll_data,
|
|
uint8_t man_id, uint8_t flash_id)
|
|
{
|
|
int status;
|
|
uint8_t flash_data;
|
|
uint32_t cnt;
|
|
|
|
status = 1;
|
|
|
|
/* Wait for 30 seconds for command to finish. */
|
|
poll_data &= BIT_7;
|
|
for (cnt = 3000000; cnt; cnt--) {
|
|
flash_data = qla2x00_read_flash_byte(ha, addr);
|
|
if ((flash_data & BIT_7) == poll_data) {
|
|
status = 0;
|
|
break;
|
|
}
|
|
|
|
if (man_id != 0x40 && man_id != 0xda) {
|
|
if ((flash_data & BIT_5) && cnt > 2)
|
|
cnt = 2;
|
|
}
|
|
udelay(10);
|
|
barrier();
|
|
cond_resched();
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* qla2x00_program_flash_address() - Programs a flash address
|
|
* @ha: HA context
|
|
* @addr: Address in flash to program
|
|
* @data: Data to be written in flash
|
|
* @man_id: Flash manufacturer ID
|
|
* @flash_id: Flash ID
|
|
*
|
|
* Returns 0 on success, else non-zero.
|
|
*/
|
|
static int
|
|
qla2x00_program_flash_address(struct qla_hw_data *ha, uint32_t addr,
|
|
uint8_t data, uint8_t man_id, uint8_t flash_id)
|
|
{
|
|
/* Write Program Command Sequence. */
|
|
if (IS_OEM_001(ha)) {
|
|
qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x555, 0x55);
|
|
qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
|
|
qla2x00_write_flash_byte(ha, addr, data);
|
|
} else {
|
|
if (man_id == 0xda && flash_id == 0xc1) {
|
|
qla2x00_write_flash_byte(ha, addr, data);
|
|
if (addr & 0x7e)
|
|
return 0;
|
|
} else {
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
|
|
qla2x00_write_flash_byte(ha, addr, data);
|
|
}
|
|
}
|
|
|
|
udelay(150);
|
|
|
|
/* Wait for write to complete. */
|
|
return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
|
|
}
|
|
|
|
/**
|
|
* qla2x00_erase_flash() - Erase the flash.
|
|
* @ha: HA context
|
|
* @man_id: Flash manufacturer ID
|
|
* @flash_id: Flash ID
|
|
*
|
|
* Returns 0 on success, else non-zero.
|
|
*/
|
|
static int
|
|
qla2x00_erase_flash(struct qla_hw_data *ha, uint8_t man_id, uint8_t flash_id)
|
|
{
|
|
/* Individual Sector Erase Command Sequence */
|
|
if (IS_OEM_001(ha)) {
|
|
qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x555, 0x55);
|
|
qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
|
|
qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x555, 0x55);
|
|
qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
|
|
} else {
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0x80);
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0x10);
|
|
}
|
|
|
|
udelay(150);
|
|
|
|
/* Wait for erase to complete. */
|
|
return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
|
|
}
|
|
|
|
/**
|
|
* qla2x00_erase_flash_sector() - Erase a flash sector.
|
|
* @ha: HA context
|
|
* @addr: Flash sector to erase
|
|
* @sec_mask: Sector address mask
|
|
* @man_id: Flash manufacturer ID
|
|
* @flash_id: Flash ID
|
|
*
|
|
* Returns 0 on success, else non-zero.
|
|
*/
|
|
static int
|
|
qla2x00_erase_flash_sector(struct qla_hw_data *ha, uint32_t addr,
|
|
uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
|
|
{
|
|
/* Individual Sector Erase Command Sequence */
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0x80);
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
|
|
if (man_id == 0x1f && flash_id == 0x13)
|
|
qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
|
|
else
|
|
qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
|
|
|
|
udelay(150);
|
|
|
|
/* Wait for erase to complete. */
|
|
return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
|
|
}
|
|
|
|
/**
|
|
* qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
|
|
* @ha: host adapter
|
|
* @man_id: Flash manufacturer ID
|
|
* @flash_id: Flash ID
|
|
*/
|
|
static void
|
|
qla2x00_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
|
|
uint8_t *flash_id)
|
|
{
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0x90);
|
|
*man_id = qla2x00_read_flash_byte(ha, 0x0000);
|
|
*flash_id = qla2x00_read_flash_byte(ha, 0x0001);
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
|
|
qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
|
|
}
|
|
|
|
static void
|
|
qla2x00_read_flash_data(struct qla_hw_data *ha, uint8_t *tmp_buf,
|
|
uint32_t saddr, uint32_t length)
|
|
{
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
uint32_t midpoint, ilength;
|
|
uint8_t data;
|
|
|
|
midpoint = length / 2;
|
|
|
|
wrt_reg_word(®->nvram, 0);
|
|
rd_reg_word(®->nvram);
|
|
for (ilength = 0; ilength < length; saddr++, ilength++, tmp_buf++) {
|
|
if (ilength == midpoint) {
|
|
wrt_reg_word(®->nvram, NVR_SELECT);
|
|
rd_reg_word(®->nvram);
|
|
}
|
|
data = qla2x00_read_flash_byte(ha, saddr);
|
|
if (saddr % 100)
|
|
udelay(10);
|
|
*tmp_buf = data;
|
|
cond_resched();
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
qla2x00_suspend_hba(struct scsi_qla_host *vha)
|
|
{
|
|
int cnt;
|
|
unsigned long flags;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
/* Suspend HBA. */
|
|
scsi_block_requests(vha->host);
|
|
ha->isp_ops->disable_intrs(ha);
|
|
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
|
|
|
|
/* Pause RISC. */
|
|
spin_lock_irqsave(&ha->hardware_lock, flags);
|
|
wrt_reg_word(®->hccr, HCCR_PAUSE_RISC);
|
|
rd_reg_word(®->hccr);
|
|
if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
|
|
for (cnt = 0; cnt < 30000; cnt++) {
|
|
if ((rd_reg_word(®->hccr) & HCCR_RISC_PAUSE) != 0)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
} else {
|
|
udelay(10);
|
|
}
|
|
spin_unlock_irqrestore(&ha->hardware_lock, flags);
|
|
}
|
|
|
|
static inline void
|
|
qla2x00_resume_hba(struct scsi_qla_host *vha)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
/* Resume HBA. */
|
|
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
|
|
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
|
|
qla2xxx_wake_dpc(vha);
|
|
qla2x00_wait_for_chip_reset(vha);
|
|
scsi_unblock_requests(vha->host);
|
|
}
|
|
|
|
void *
|
|
qla2x00_read_optrom_data(struct scsi_qla_host *vha, void *buf,
|
|
uint32_t offset, uint32_t length)
|
|
{
|
|
uint32_t addr, midpoint;
|
|
uint8_t *data;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
/* Suspend HBA. */
|
|
qla2x00_suspend_hba(vha);
|
|
|
|
/* Go with read. */
|
|
midpoint = ha->optrom_size / 2;
|
|
|
|
qla2x00_flash_enable(ha);
|
|
wrt_reg_word(®->nvram, 0);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
for (addr = offset, data = buf; addr < length; addr++, data++) {
|
|
if (addr == midpoint) {
|
|
wrt_reg_word(®->nvram, NVR_SELECT);
|
|
rd_reg_word(®->nvram); /* PCI Posting. */
|
|
}
|
|
|
|
*data = qla2x00_read_flash_byte(ha, addr);
|
|
}
|
|
qla2x00_flash_disable(ha);
|
|
|
|
/* Resume HBA. */
|
|
qla2x00_resume_hba(vha);
|
|
|
|
return buf;
|
|
}
|
|
|
|
int
|
|
qla2x00_write_optrom_data(struct scsi_qla_host *vha, void *buf,
|
|
uint32_t offset, uint32_t length)
|
|
{
|
|
|
|
int rval;
|
|
uint8_t man_id, flash_id, sec_number, *data;
|
|
uint16_t wd;
|
|
uint32_t addr, liter, sec_mask, rest_addr;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
|
|
|
|
/* Suspend HBA. */
|
|
qla2x00_suspend_hba(vha);
|
|
|
|
rval = QLA_SUCCESS;
|
|
sec_number = 0;
|
|
|
|
/* Reset ISP chip. */
|
|
wrt_reg_word(®->ctrl_status, CSR_ISP_SOFT_RESET);
|
|
pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
|
|
|
|
/* Go with write. */
|
|
qla2x00_flash_enable(ha);
|
|
do { /* Loop once to provide quick error exit */
|
|
/* Structure of flash memory based on manufacturer */
|
|
if (IS_OEM_001(ha)) {
|
|
/* OEM variant with special flash part. */
|
|
man_id = flash_id = 0;
|
|
rest_addr = 0xffff;
|
|
sec_mask = 0x10000;
|
|
goto update_flash;
|
|
}
|
|
qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
|
|
switch (man_id) {
|
|
case 0x20: /* ST flash. */
|
|
if (flash_id == 0xd2 || flash_id == 0xe3) {
|
|
/*
|
|
* ST m29w008at part - 64kb sector size with
|
|
* 32kb,8kb,8kb,16kb sectors at memory address
|
|
* 0xf0000.
|
|
*/
|
|
rest_addr = 0xffff;
|
|
sec_mask = 0x10000;
|
|
break;
|
|
}
|
|
/*
|
|
* ST m29w010b part - 16kb sector size
|
|
* Default to 16kb sectors
|
|
*/
|
|
rest_addr = 0x3fff;
|
|
sec_mask = 0x1c000;
|
|
break;
|
|
case 0x40: /* Mostel flash. */
|
|
/* Mostel v29c51001 part - 512 byte sector size. */
|
|
rest_addr = 0x1ff;
|
|
sec_mask = 0x1fe00;
|
|
break;
|
|
case 0xbf: /* SST flash. */
|
|
/* SST39sf10 part - 4kb sector size. */
|
|
rest_addr = 0xfff;
|
|
sec_mask = 0x1f000;
|
|
break;
|
|
case 0xda: /* Winbond flash. */
|
|
/* Winbond W29EE011 part - 256 byte sector size. */
|
|
rest_addr = 0x7f;
|
|
sec_mask = 0x1ff80;
|
|
break;
|
|
case 0xc2: /* Macronix flash. */
|
|
/* 64k sector size. */
|
|
if (flash_id == 0x38 || flash_id == 0x4f) {
|
|
rest_addr = 0xffff;
|
|
sec_mask = 0x10000;
|
|
break;
|
|
}
|
|
fallthrough;
|
|
|
|
case 0x1f: /* Atmel flash. */
|
|
/* 512k sector size. */
|
|
if (flash_id == 0x13) {
|
|
rest_addr = 0x7fffffff;
|
|
sec_mask = 0x80000000;
|
|
break;
|
|
}
|
|
fallthrough;
|
|
|
|
case 0x01: /* AMD flash. */
|
|
if (flash_id == 0x38 || flash_id == 0x40 ||
|
|
flash_id == 0x4f) {
|
|
/* Am29LV081 part - 64kb sector size. */
|
|
/* Am29LV002BT part - 64kb sector size. */
|
|
rest_addr = 0xffff;
|
|
sec_mask = 0x10000;
|
|
break;
|
|
} else if (flash_id == 0x3e) {
|
|
/*
|
|
* Am29LV008b part - 64kb sector size with
|
|
* 32kb,8kb,8kb,16kb sector at memory address
|
|
* h0xf0000.
|
|
*/
|
|
rest_addr = 0xffff;
|
|
sec_mask = 0x10000;
|
|
break;
|
|
} else if (flash_id == 0x20 || flash_id == 0x6e) {
|
|
/*
|
|
* Am29LV010 part or AM29f010 - 16kb sector
|
|
* size.
|
|
*/
|
|
rest_addr = 0x3fff;
|
|
sec_mask = 0x1c000;
|
|
break;
|
|
} else if (flash_id == 0x6d) {
|
|
/* Am29LV001 part - 8kb sector size. */
|
|
rest_addr = 0x1fff;
|
|
sec_mask = 0x1e000;
|
|
break;
|
|
}
|
|
fallthrough;
|
|
default:
|
|
/* Default to 16 kb sector size. */
|
|
rest_addr = 0x3fff;
|
|
sec_mask = 0x1c000;
|
|
break;
|
|
}
|
|
|
|
update_flash:
|
|
if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
|
|
if (qla2x00_erase_flash(ha, man_id, flash_id)) {
|
|
rval = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
}
|
|
|
|
for (addr = offset, liter = 0; liter < length; liter++,
|
|
addr++) {
|
|
data = buf + liter;
|
|
/* Are we at the beginning of a sector? */
|
|
if ((addr & rest_addr) == 0) {
|
|
if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
|
|
if (addr >= 0x10000UL) {
|
|
if (((addr >> 12) & 0xf0) &&
|
|
((man_id == 0x01 &&
|
|
flash_id == 0x3e) ||
|
|
(man_id == 0x20 &&
|
|
flash_id == 0xd2))) {
|
|
sec_number++;
|
|
if (sec_number == 1) {
|
|
rest_addr =
|
|
0x7fff;
|
|
sec_mask =
|
|
0x18000;
|
|
} else if (
|
|
sec_number == 2 ||
|
|
sec_number == 3) {
|
|
rest_addr =
|
|
0x1fff;
|
|
sec_mask =
|
|
0x1e000;
|
|
} else if (
|
|
sec_number == 4) {
|
|
rest_addr =
|
|
0x3fff;
|
|
sec_mask =
|
|
0x1c000;
|
|
}
|
|
}
|
|
}
|
|
} else if (addr == ha->optrom_size / 2) {
|
|
wrt_reg_word(®->nvram, NVR_SELECT);
|
|
rd_reg_word(®->nvram);
|
|
}
|
|
|
|
if (flash_id == 0xda && man_id == 0xc1) {
|
|
qla2x00_write_flash_byte(ha, 0x5555,
|
|
0xaa);
|
|
qla2x00_write_flash_byte(ha, 0x2aaa,
|
|
0x55);
|
|
qla2x00_write_flash_byte(ha, 0x5555,
|
|
0xa0);
|
|
} else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
|
|
/* Then erase it */
|
|
if (qla2x00_erase_flash_sector(ha,
|
|
addr, sec_mask, man_id,
|
|
flash_id)) {
|
|
rval = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
if (man_id == 0x01 && flash_id == 0x6d)
|
|
sec_number++;
|
|
}
|
|
}
|
|
|
|
if (man_id == 0x01 && flash_id == 0x6d) {
|
|
if (sec_number == 1 &&
|
|
addr == (rest_addr - 1)) {
|
|
rest_addr = 0x0fff;
|
|
sec_mask = 0x1f000;
|
|
} else if (sec_number == 3 && (addr & 0x7ffe)) {
|
|
rest_addr = 0x3fff;
|
|
sec_mask = 0x1c000;
|
|
}
|
|
}
|
|
|
|
if (qla2x00_program_flash_address(ha, addr, *data,
|
|
man_id, flash_id)) {
|
|
rval = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
cond_resched();
|
|
}
|
|
} while (0);
|
|
qla2x00_flash_disable(ha);
|
|
|
|
/* Resume HBA. */
|
|
qla2x00_resume_hba(vha);
|
|
|
|
return rval;
|
|
}
|
|
|
|
void *
|
|
qla24xx_read_optrom_data(struct scsi_qla_host *vha, void *buf,
|
|
uint32_t offset, uint32_t length)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
/* Suspend HBA. */
|
|
scsi_block_requests(vha->host);
|
|
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
|
|
|
|
/* Go with read. */
|
|
qla24xx_read_flash_data(vha, buf, offset >> 2, length >> 2);
|
|
|
|
/* Resume HBA. */
|
|
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
|
|
scsi_unblock_requests(vha->host);
|
|
|
|
return buf;
|
|
}
|
|
|
|
static int
|
|
qla28xx_extract_sfub_and_verify(struct scsi_qla_host *vha, __le32 *buf,
|
|
uint32_t len, uint32_t buf_size_without_sfub, uint8_t *sfub_buf)
|
|
{
|
|
uint32_t check_sum = 0;
|
|
__le32 *p;
|
|
int i;
|
|
|
|
p = buf + buf_size_without_sfub;
|
|
|
|
/* Extract SFUB from end of file */
|
|
memcpy(sfub_buf, (uint8_t *)p,
|
|
sizeof(struct secure_flash_update_block));
|
|
|
|
for (i = 0; i < (sizeof(struct secure_flash_update_block) >> 2); i++)
|
|
check_sum += le32_to_cpu(p[i]);
|
|
|
|
check_sum = (~check_sum) + 1;
|
|
|
|
if (check_sum != le32_to_cpu(p[i])) {
|
|
ql_log(ql_log_warn, vha, 0x7097,
|
|
"SFUB checksum failed, 0x%x, 0x%x\n",
|
|
check_sum, le32_to_cpu(p[i]));
|
|
return QLA_COMMAND_ERROR;
|
|
}
|
|
|
|
return QLA_SUCCESS;
|
|
}
|
|
|
|
static int
|
|
qla28xx_get_flash_region(struct scsi_qla_host *vha, uint32_t start,
|
|
struct qla_flt_region *region)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
struct qla_flt_header *flt = ha->flt;
|
|
struct qla_flt_region *flt_reg = &flt->region[0];
|
|
uint16_t cnt;
|
|
int rval = QLA_FUNCTION_FAILED;
|
|
|
|
if (!ha->flt)
|
|
return QLA_FUNCTION_FAILED;
|
|
|
|
cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region);
|
|
for (; cnt; cnt--, flt_reg++) {
|
|
if (le32_to_cpu(flt_reg->start) == start) {
|
|
memcpy((uint8_t *)region, flt_reg,
|
|
sizeof(struct qla_flt_region));
|
|
rval = QLA_SUCCESS;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rval;
|
|
}
|
|
|
|
static int
|
|
qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
|
|
uint32_t dwords)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
ulong liter;
|
|
ulong dburst = OPTROM_BURST_DWORDS; /* burst size in dwords */
|
|
uint32_t sec_mask, rest_addr, fdata;
|
|
void *optrom = NULL;
|
|
dma_addr_t optrom_dma;
|
|
int rval, ret;
|
|
struct secure_flash_update_block *sfub;
|
|
dma_addr_t sfub_dma;
|
|
uint32_t offset = faddr << 2;
|
|
uint32_t buf_size_without_sfub = 0;
|
|
struct qla_flt_region region;
|
|
bool reset_to_rom = false;
|
|
uint32_t risc_size, risc_attr = 0;
|
|
__be32 *fw_array = NULL;
|
|
|
|
/* Retrieve region info - must be a start address passed in */
|
|
rval = qla28xx_get_flash_region(vha, offset, ®ion);
|
|
|
|
if (rval != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0xffff,
|
|
"Invalid address %x - not a region start address\n",
|
|
offset);
|
|
goto done;
|
|
}
|
|
|
|
/* Allocate dma buffer for burst write */
|
|
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
|
|
&optrom_dma, GFP_KERNEL);
|
|
if (!optrom) {
|
|
ql_log(ql_log_warn, vha, 0x7095,
|
|
"Failed allocate burst (%x bytes)\n", OPTROM_BURST_SIZE);
|
|
rval = QLA_COMMAND_ERROR;
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* If adapter supports secure flash and region is secure
|
|
* extract secure flash update block (SFUB) and verify
|
|
*/
|
|
if (ha->flags.secure_adapter && region.attribute) {
|
|
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
|
|
"Region %x is secure\n", le16_to_cpu(region.code));
|
|
|
|
switch (le16_to_cpu(region.code)) {
|
|
case FLT_REG_FW:
|
|
case FLT_REG_FW_SEC_27XX:
|
|
case FLT_REG_MPI_PRI_28XX:
|
|
case FLT_REG_MPI_SEC_28XX:
|
|
fw_array = (__force __be32 *)dwptr;
|
|
|
|
/* 1st fw array */
|
|
risc_size = be32_to_cpu(fw_array[3]);
|
|
risc_attr = be32_to_cpu(fw_array[9]);
|
|
|
|
buf_size_without_sfub = risc_size;
|
|
fw_array += risc_size;
|
|
|
|
/* 2nd fw array */
|
|
risc_size = be32_to_cpu(fw_array[3]);
|
|
|
|
buf_size_without_sfub += risc_size;
|
|
fw_array += risc_size;
|
|
|
|
/* 1st dump template */
|
|
risc_size = be32_to_cpu(fw_array[2]);
|
|
|
|
/* skip header and ignore checksum */
|
|
buf_size_without_sfub += risc_size;
|
|
fw_array += risc_size;
|
|
|
|
if (risc_attr & BIT_9) {
|
|
/* 2nd dump template */
|
|
risc_size = be32_to_cpu(fw_array[2]);
|
|
|
|
/* skip header and ignore checksum */
|
|
buf_size_without_sfub += risc_size;
|
|
fw_array += risc_size;
|
|
}
|
|
break;
|
|
|
|
case FLT_REG_PEP_PRI_28XX:
|
|
case FLT_REG_PEP_SEC_28XX:
|
|
fw_array = (__force __be32 *)dwptr;
|
|
|
|
/* 1st fw array */
|
|
risc_size = be32_to_cpu(fw_array[3]);
|
|
risc_attr = be32_to_cpu(fw_array[9]);
|
|
|
|
buf_size_without_sfub = risc_size;
|
|
fw_array += risc_size;
|
|
break;
|
|
|
|
default:
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha,
|
|
0xffff, "Secure region %x not supported\n",
|
|
le16_to_cpu(region.code));
|
|
rval = QLA_COMMAND_ERROR;
|
|
goto done;
|
|
}
|
|
|
|
sfub = dma_alloc_coherent(&ha->pdev->dev,
|
|
sizeof(struct secure_flash_update_block), &sfub_dma,
|
|
GFP_KERNEL);
|
|
if (!sfub) {
|
|
ql_log(ql_log_warn, vha, 0xffff,
|
|
"Unable to allocate memory for SFUB\n");
|
|
rval = QLA_COMMAND_ERROR;
|
|
goto done;
|
|
}
|
|
|
|
rval = qla28xx_extract_sfub_and_verify(vha, (__le32 *)dwptr,
|
|
dwords, buf_size_without_sfub, (uint8_t *)sfub);
|
|
|
|
if (rval != QLA_SUCCESS)
|
|
goto done;
|
|
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
|
|
"SFUB extract and verify successful\n");
|
|
}
|
|
|
|
rest_addr = (ha->fdt_block_size >> 2) - 1;
|
|
sec_mask = ~rest_addr;
|
|
|
|
/* Lock semaphore */
|
|
rval = qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_LOCK);
|
|
if (rval != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0xffff,
|
|
"Unable to lock flash semaphore.");
|
|
goto done;
|
|
}
|
|
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
|
|
"Unprotect flash...\n");
|
|
rval = qla24xx_unprotect_flash(vha);
|
|
if (rval) {
|
|
qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_UNLOCK);
|
|
ql_log(ql_log_warn, vha, 0x7096, "Failed unprotect flash\n");
|
|
goto done;
|
|
}
|
|
|
|
for (liter = 0; liter < dwords; liter++, faddr++) {
|
|
fdata = (faddr & sec_mask) << 2;
|
|
|
|
/* If start of sector */
|
|
if (!(faddr & rest_addr)) {
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
|
|
"Erase sector %#x...\n", faddr);
|
|
rval = qla24xx_erase_sector(vha, fdata);
|
|
if (rval) {
|
|
ql_dbg(ql_dbg_user, vha, 0x7007,
|
|
"Failed erase sector %#x\n", faddr);
|
|
goto write_protect;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ha->flags.secure_adapter) {
|
|
/*
|
|
* If adapter supports secure flash but FW doesn't,
|
|
* disable write protect, release semaphore and reset
|
|
* chip to execute ROM code in order to update region securely
|
|
*/
|
|
if (!ha->flags.secure_fw) {
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
|
|
"Disable Write and Release Semaphore.");
|
|
rval = qla24xx_protect_flash(vha);
|
|
if (rval != QLA_SUCCESS) {
|
|
qla81xx_fac_semaphore_access(vha,
|
|
FAC_SEMAPHORE_UNLOCK);
|
|
ql_log(ql_log_warn, vha, 0xffff,
|
|
"Unable to protect flash.");
|
|
goto done;
|
|
}
|
|
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
|
|
"Reset chip to ROM.");
|
|
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
|
|
set_bit(ISP_ABORT_TO_ROM, &vha->dpc_flags);
|
|
qla2xxx_wake_dpc(vha);
|
|
rval = qla2x00_wait_for_chip_reset(vha);
|
|
if (rval != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0xffff,
|
|
"Unable to reset to ROM code.");
|
|
goto done;
|
|
}
|
|
reset_to_rom = true;
|
|
ha->flags.fac_supported = 0;
|
|
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
|
|
"Lock Semaphore");
|
|
rval = qla2xxx_write_remote_register(vha,
|
|
FLASH_SEMAPHORE_REGISTER_ADDR, 0x00020002);
|
|
if (rval != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0xffff,
|
|
"Unable to lock flash semaphore.");
|
|
goto done;
|
|
}
|
|
|
|
/* Unprotect flash */
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
|
|
"Enable Write.");
|
|
rval = qla2x00_write_ram_word(vha, 0x7ffd0101, 0);
|
|
if (rval) {
|
|
ql_log(ql_log_warn, vha, 0x7096,
|
|
"Failed unprotect flash\n");
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
/* If region is secure, send Secure Flash MB Cmd */
|
|
if (region.attribute && buf_size_without_sfub) {
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
|
|
"Sending Secure Flash MB Cmd\n");
|
|
rval = qla28xx_secure_flash_update(vha, 0,
|
|
le16_to_cpu(region.code),
|
|
buf_size_without_sfub, sfub_dma,
|
|
sizeof(struct secure_flash_update_block) >> 2);
|
|
if (rval != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0xffff,
|
|
"Secure Flash MB Cmd failed %x.", rval);
|
|
goto write_protect;
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/* re-init flash offset */
|
|
faddr = offset >> 2;
|
|
|
|
for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
|
|
fdata = (faddr & sec_mask) << 2;
|
|
|
|
/* If smaller than a burst remaining */
|
|
if (dwords - liter < dburst)
|
|
dburst = dwords - liter;
|
|
|
|
/* Copy to dma buffer */
|
|
memcpy(optrom, dwptr, dburst << 2);
|
|
|
|
/* Burst write */
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
|
|
"Write burst (%#lx dwords)...\n", dburst);
|
|
rval = qla2x00_load_ram(vha, optrom_dma,
|
|
flash_data_addr(ha, faddr), dburst);
|
|
if (rval != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0x7097,
|
|
"Failed burst write at %x (%p/%#llx)...\n",
|
|
flash_data_addr(ha, faddr), optrom,
|
|
(u64)optrom_dma);
|
|
break;
|
|
}
|
|
|
|
liter += dburst - 1;
|
|
faddr += dburst - 1;
|
|
dwptr += dburst - 1;
|
|
}
|
|
|
|
write_protect:
|
|
ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
|
|
"Protect flash...\n");
|
|
ret = qla24xx_protect_flash(vha);
|
|
if (ret) {
|
|
qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_UNLOCK);
|
|
ql_log(ql_log_warn, vha, 0x7099,
|
|
"Failed protect flash\n");
|
|
rval = QLA_COMMAND_ERROR;
|
|
}
|
|
|
|
if (reset_to_rom == true) {
|
|
/* Schedule DPC to restart the RISC */
|
|
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
|
|
qla2xxx_wake_dpc(vha);
|
|
|
|
ret = qla2x00_wait_for_hba_online(vha);
|
|
if (ret != QLA_SUCCESS) {
|
|
ql_log(ql_log_warn, vha, 0xffff,
|
|
"Adapter did not come out of reset\n");
|
|
rval = QLA_COMMAND_ERROR;
|
|
}
|
|
}
|
|
|
|
done:
|
|
if (optrom)
|
|
dma_free_coherent(&ha->pdev->dev,
|
|
OPTROM_BURST_SIZE, optrom, optrom_dma);
|
|
|
|
return rval;
|
|
}
|
|
|
|
int
|
|
qla24xx_write_optrom_data(struct scsi_qla_host *vha, void *buf,
|
|
uint32_t offset, uint32_t length)
|
|
{
|
|
int rval;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
/* Suspend HBA. */
|
|
scsi_block_requests(vha->host);
|
|
set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
|
|
|
|
/* Go with write. */
|
|
if (IS_QLA28XX(ha))
|
|
rval = qla28xx_write_flash_data(vha, buf, offset >> 2,
|
|
length >> 2);
|
|
else
|
|
rval = qla24xx_write_flash_data(vha, buf, offset >> 2,
|
|
length >> 2);
|
|
|
|
clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
|
|
scsi_unblock_requests(vha->host);
|
|
|
|
return rval;
|
|
}
|
|
|
|
void *
|
|
qla25xx_read_optrom_data(struct scsi_qla_host *vha, void *buf,
|
|
uint32_t offset, uint32_t length)
|
|
{
|
|
int rval;
|
|
dma_addr_t optrom_dma;
|
|
void *optrom;
|
|
uint8_t *pbuf;
|
|
uint32_t faddr, left, burst;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
|
|
IS_QLA27XX(ha) || IS_QLA28XX(ha))
|
|
goto try_fast;
|
|
if (offset & 0xfff)
|
|
goto slow_read;
|
|
if (length < OPTROM_BURST_SIZE)
|
|
goto slow_read;
|
|
|
|
try_fast:
|
|
if (offset & 0xff)
|
|
goto slow_read;
|
|
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
|
|
&optrom_dma, GFP_KERNEL);
|
|
if (!optrom) {
|
|
ql_log(ql_log_warn, vha, 0x00cc,
|
|
"Unable to allocate memory for optrom burst read (%x KB).\n",
|
|
OPTROM_BURST_SIZE / 1024);
|
|
goto slow_read;
|
|
}
|
|
|
|
pbuf = buf;
|
|
faddr = offset >> 2;
|
|
left = length >> 2;
|
|
burst = OPTROM_BURST_DWORDS;
|
|
while (left != 0) {
|
|
if (burst > left)
|
|
burst = left;
|
|
|
|
rval = qla2x00_dump_ram(vha, optrom_dma,
|
|
flash_data_addr(ha, faddr), burst);
|
|
if (rval) {
|
|
ql_log(ql_log_warn, vha, 0x00f5,
|
|
"Unable to burst-read optrom segment (%x/%x/%llx).\n",
|
|
rval, flash_data_addr(ha, faddr),
|
|
(unsigned long long)optrom_dma);
|
|
ql_log(ql_log_warn, vha, 0x00f6,
|
|
"Reverting to slow-read.\n");
|
|
|
|
dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
|
|
optrom, optrom_dma);
|
|
goto slow_read;
|
|
}
|
|
|
|
memcpy(pbuf, optrom, burst * 4);
|
|
|
|
left -= burst;
|
|
faddr += burst;
|
|
pbuf += burst * 4;
|
|
}
|
|
|
|
dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, optrom,
|
|
optrom_dma);
|
|
|
|
return buf;
|
|
|
|
slow_read:
|
|
return qla24xx_read_optrom_data(vha, buf, offset, length);
|
|
}
|
|
|
|
/**
|
|
* qla2x00_get_fcode_version() - Determine an FCODE image's version.
|
|
* @ha: HA context
|
|
* @pcids: Pointer to the FCODE PCI data structure
|
|
*
|
|
* The process of retrieving the FCODE version information is at best
|
|
* described as interesting.
|
|
*
|
|
* Within the first 100h bytes of the image an ASCII string is present
|
|
* which contains several pieces of information including the FCODE
|
|
* version. Unfortunately it seems the only reliable way to retrieve
|
|
* the version is by scanning for another sentinel within the string,
|
|
* the FCODE build date:
|
|
*
|
|
* ... 2.00.02 10/17/02 ...
|
|
*
|
|
* Returns QLA_SUCCESS on successful retrieval of version.
|
|
*/
|
|
static void
|
|
qla2x00_get_fcode_version(struct qla_hw_data *ha, uint32_t pcids)
|
|
{
|
|
int ret = QLA_FUNCTION_FAILED;
|
|
uint32_t istart, iend, iter, vend;
|
|
uint8_t do_next, rbyte, *vbyte;
|
|
|
|
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
|
|
|
|
/* Skip the PCI data structure. */
|
|
istart = pcids +
|
|
((qla2x00_read_flash_byte(ha, pcids + 0x0B) << 8) |
|
|
qla2x00_read_flash_byte(ha, pcids + 0x0A));
|
|
iend = istart + 0x100;
|
|
do {
|
|
/* Scan for the sentinel date string...eeewww. */
|
|
do_next = 0;
|
|
iter = istart;
|
|
while ((iter < iend) && !do_next) {
|
|
iter++;
|
|
if (qla2x00_read_flash_byte(ha, iter) == '/') {
|
|
if (qla2x00_read_flash_byte(ha, iter + 2) ==
|
|
'/')
|
|
do_next++;
|
|
else if (qla2x00_read_flash_byte(ha,
|
|
iter + 3) == '/')
|
|
do_next++;
|
|
}
|
|
}
|
|
if (!do_next)
|
|
break;
|
|
|
|
/* Backtrack to previous ' ' (space). */
|
|
do_next = 0;
|
|
while ((iter > istart) && !do_next) {
|
|
iter--;
|
|
if (qla2x00_read_flash_byte(ha, iter) == ' ')
|
|
do_next++;
|
|
}
|
|
if (!do_next)
|
|
break;
|
|
|
|
/*
|
|
* Mark end of version tag, and find previous ' ' (space) or
|
|
* string length (recent FCODE images -- major hack ahead!!!).
|
|
*/
|
|
vend = iter - 1;
|
|
do_next = 0;
|
|
while ((iter > istart) && !do_next) {
|
|
iter--;
|
|
rbyte = qla2x00_read_flash_byte(ha, iter);
|
|
if (rbyte == ' ' || rbyte == 0xd || rbyte == 0x10)
|
|
do_next++;
|
|
}
|
|
if (!do_next)
|
|
break;
|
|
|
|
/* Mark beginning of version tag, and copy data. */
|
|
iter++;
|
|
if ((vend - iter) &&
|
|
((vend - iter) < sizeof(ha->fcode_revision))) {
|
|
vbyte = ha->fcode_revision;
|
|
while (iter <= vend) {
|
|
*vbyte++ = qla2x00_read_flash_byte(ha, iter);
|
|
iter++;
|
|
}
|
|
ret = QLA_SUCCESS;
|
|
}
|
|
} while (0);
|
|
|
|
if (ret != QLA_SUCCESS)
|
|
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
|
|
}
|
|
|
|
int
|
|
qla2x00_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
|
|
{
|
|
int ret = QLA_SUCCESS;
|
|
uint8_t code_type, last_image;
|
|
uint32_t pcihdr, pcids;
|
|
uint8_t *dbyte;
|
|
uint16_t *dcode;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
if (!ha->pio_address || !mbuf)
|
|
return QLA_FUNCTION_FAILED;
|
|
|
|
memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
|
|
memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
|
|
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
|
|
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
|
|
|
|
qla2x00_flash_enable(ha);
|
|
|
|
/* Begin with first PCI expansion ROM header. */
|
|
pcihdr = 0;
|
|
last_image = 1;
|
|
do {
|
|
/* Verify PCI expansion ROM header. */
|
|
if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 ||
|
|
qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) {
|
|
/* No signature */
|
|
ql_log(ql_log_fatal, vha, 0x0050,
|
|
"No matching ROM signature.\n");
|
|
ret = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
|
|
/* Locate PCI data structure. */
|
|
pcids = pcihdr +
|
|
((qla2x00_read_flash_byte(ha, pcihdr + 0x19) << 8) |
|
|
qla2x00_read_flash_byte(ha, pcihdr + 0x18));
|
|
|
|
/* Validate signature of PCI data structure. */
|
|
if (qla2x00_read_flash_byte(ha, pcids) != 'P' ||
|
|
qla2x00_read_flash_byte(ha, pcids + 0x1) != 'C' ||
|
|
qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' ||
|
|
qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') {
|
|
/* Incorrect header. */
|
|
ql_log(ql_log_fatal, vha, 0x0051,
|
|
"PCI data struct not found pcir_adr=%x.\n", pcids);
|
|
ret = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
|
|
/* Read version */
|
|
code_type = qla2x00_read_flash_byte(ha, pcids + 0x14);
|
|
switch (code_type) {
|
|
case ROM_CODE_TYPE_BIOS:
|
|
/* Intel x86, PC-AT compatible. */
|
|
ha->bios_revision[0] =
|
|
qla2x00_read_flash_byte(ha, pcids + 0x12);
|
|
ha->bios_revision[1] =
|
|
qla2x00_read_flash_byte(ha, pcids + 0x13);
|
|
ql_dbg(ql_dbg_init, vha, 0x0052,
|
|
"Read BIOS %d.%d.\n",
|
|
ha->bios_revision[1], ha->bios_revision[0]);
|
|
break;
|
|
case ROM_CODE_TYPE_FCODE:
|
|
/* Open Firmware standard for PCI (FCode). */
|
|
/* Eeeewww... */
|
|
qla2x00_get_fcode_version(ha, pcids);
|
|
break;
|
|
case ROM_CODE_TYPE_EFI:
|
|
/* Extensible Firmware Interface (EFI). */
|
|
ha->efi_revision[0] =
|
|
qla2x00_read_flash_byte(ha, pcids + 0x12);
|
|
ha->efi_revision[1] =
|
|
qla2x00_read_flash_byte(ha, pcids + 0x13);
|
|
ql_dbg(ql_dbg_init, vha, 0x0053,
|
|
"Read EFI %d.%d.\n",
|
|
ha->efi_revision[1], ha->efi_revision[0]);
|
|
break;
|
|
default:
|
|
ql_log(ql_log_warn, vha, 0x0054,
|
|
"Unrecognized code type %x at pcids %x.\n",
|
|
code_type, pcids);
|
|
break;
|
|
}
|
|
|
|
last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7;
|
|
|
|
/* Locate next PCI expansion ROM. */
|
|
pcihdr += ((qla2x00_read_flash_byte(ha, pcids + 0x11) << 8) |
|
|
qla2x00_read_flash_byte(ha, pcids + 0x10)) * 512;
|
|
} while (!last_image);
|
|
|
|
if (IS_QLA2322(ha)) {
|
|
/* Read firmware image information. */
|
|
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
|
|
dbyte = mbuf;
|
|
memset(dbyte, 0, 8);
|
|
dcode = (uint16_t *)dbyte;
|
|
|
|
qla2x00_read_flash_data(ha, dbyte, ha->flt_region_fw * 4 + 10,
|
|
8);
|
|
ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010a,
|
|
"Dumping fw "
|
|
"ver from flash:.\n");
|
|
ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010b,
|
|
dbyte, 32);
|
|
|
|
if ((dcode[0] == 0xffff && dcode[1] == 0xffff &&
|
|
dcode[2] == 0xffff && dcode[3] == 0xffff) ||
|
|
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
|
|
dcode[3] == 0)) {
|
|
ql_log(ql_log_warn, vha, 0x0057,
|
|
"Unrecognized fw revision at %x.\n",
|
|
ha->flt_region_fw * 4);
|
|
} else {
|
|
/* values are in big endian */
|
|
ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1];
|
|
ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3];
|
|
ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5];
|
|
ql_dbg(ql_dbg_init, vha, 0x0058,
|
|
"FW Version: "
|
|
"%d.%d.%d.\n", ha->fw_revision[0],
|
|
ha->fw_revision[1], ha->fw_revision[2]);
|
|
}
|
|
}
|
|
|
|
qla2x00_flash_disable(ha);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
qla82xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
|
|
{
|
|
int ret = QLA_SUCCESS;
|
|
uint32_t pcihdr, pcids;
|
|
uint32_t *dcode = mbuf;
|
|
uint8_t *bcode = mbuf;
|
|
uint8_t code_type, last_image;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
if (!mbuf)
|
|
return QLA_FUNCTION_FAILED;
|
|
|
|
memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
|
|
memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
|
|
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
|
|
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
|
|
|
|
/* Begin with first PCI expansion ROM header. */
|
|
pcihdr = ha->flt_region_boot << 2;
|
|
last_image = 1;
|
|
do {
|
|
/* Verify PCI expansion ROM header. */
|
|
ha->isp_ops->read_optrom(vha, dcode, pcihdr, 0x20 * 4);
|
|
bcode = mbuf + (pcihdr % 4);
|
|
if (memcmp(bcode, "\x55\xaa", 2)) {
|
|
/* No signature */
|
|
ql_log(ql_log_fatal, vha, 0x0154,
|
|
"No matching ROM signature.\n");
|
|
ret = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
|
|
/* Locate PCI data structure. */
|
|
pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
|
|
|
|
ha->isp_ops->read_optrom(vha, dcode, pcids, 0x20 * 4);
|
|
bcode = mbuf + (pcihdr % 4);
|
|
|
|
/* Validate signature of PCI data structure. */
|
|
if (memcmp(bcode, "PCIR", 4)) {
|
|
/* Incorrect header. */
|
|
ql_log(ql_log_fatal, vha, 0x0155,
|
|
"PCI data struct not found pcir_adr=%x.\n", pcids);
|
|
ret = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
|
|
/* Read version */
|
|
code_type = bcode[0x14];
|
|
switch (code_type) {
|
|
case ROM_CODE_TYPE_BIOS:
|
|
/* Intel x86, PC-AT compatible. */
|
|
ha->bios_revision[0] = bcode[0x12];
|
|
ha->bios_revision[1] = bcode[0x13];
|
|
ql_dbg(ql_dbg_init, vha, 0x0156,
|
|
"Read BIOS %d.%d.\n",
|
|
ha->bios_revision[1], ha->bios_revision[0]);
|
|
break;
|
|
case ROM_CODE_TYPE_FCODE:
|
|
/* Open Firmware standard for PCI (FCode). */
|
|
ha->fcode_revision[0] = bcode[0x12];
|
|
ha->fcode_revision[1] = bcode[0x13];
|
|
ql_dbg(ql_dbg_init, vha, 0x0157,
|
|
"Read FCODE %d.%d.\n",
|
|
ha->fcode_revision[1], ha->fcode_revision[0]);
|
|
break;
|
|
case ROM_CODE_TYPE_EFI:
|
|
/* Extensible Firmware Interface (EFI). */
|
|
ha->efi_revision[0] = bcode[0x12];
|
|
ha->efi_revision[1] = bcode[0x13];
|
|
ql_dbg(ql_dbg_init, vha, 0x0158,
|
|
"Read EFI %d.%d.\n",
|
|
ha->efi_revision[1], ha->efi_revision[0]);
|
|
break;
|
|
default:
|
|
ql_log(ql_log_warn, vha, 0x0159,
|
|
"Unrecognized code type %x at pcids %x.\n",
|
|
code_type, pcids);
|
|
break;
|
|
}
|
|
|
|
last_image = bcode[0x15] & BIT_7;
|
|
|
|
/* Locate next PCI expansion ROM. */
|
|
pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
|
|
} while (!last_image);
|
|
|
|
/* Read firmware image information. */
|
|
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
|
|
dcode = mbuf;
|
|
ha->isp_ops->read_optrom(vha, dcode, ha->flt_region_fw << 2, 0x20);
|
|
bcode = mbuf + (pcihdr % 4);
|
|
|
|
/* Validate signature of PCI data structure. */
|
|
if (bcode[0x0] == 0x3 && bcode[0x1] == 0x0 &&
|
|
bcode[0x2] == 0x40 && bcode[0x3] == 0x40) {
|
|
ha->fw_revision[0] = bcode[0x4];
|
|
ha->fw_revision[1] = bcode[0x5];
|
|
ha->fw_revision[2] = bcode[0x6];
|
|
ql_dbg(ql_dbg_init, vha, 0x0153,
|
|
"Firmware revision %d.%d.%d\n",
|
|
ha->fw_revision[0], ha->fw_revision[1],
|
|
ha->fw_revision[2]);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
qla24xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
|
|
{
|
|
int ret = QLA_SUCCESS;
|
|
uint32_t pcihdr = 0, pcids = 0;
|
|
uint32_t *dcode = mbuf;
|
|
uint8_t *bcode = mbuf;
|
|
uint8_t code_type, last_image;
|
|
int i;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
uint32_t faddr = 0;
|
|
struct active_regions active_regions = { };
|
|
|
|
if (IS_P3P_TYPE(ha))
|
|
return ret;
|
|
|
|
if (!mbuf)
|
|
return QLA_FUNCTION_FAILED;
|
|
|
|
memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
|
|
memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
|
|
memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
|
|
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
|
|
|
|
pcihdr = ha->flt_region_boot << 2;
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
|
|
qla27xx_get_active_image(vha, &active_regions);
|
|
if (active_regions.global == QLA27XX_SECONDARY_IMAGE) {
|
|
pcihdr = ha->flt_region_boot_sec << 2;
|
|
}
|
|
}
|
|
|
|
do {
|
|
/* Verify PCI expansion ROM header. */
|
|
qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
|
|
bcode = mbuf + (pcihdr % 4);
|
|
if (memcmp(bcode, "\x55\xaa", 2)) {
|
|
/* No signature */
|
|
ql_log(ql_log_fatal, vha, 0x0059,
|
|
"No matching ROM signature.\n");
|
|
ret = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
|
|
/* Locate PCI data structure. */
|
|
pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
|
|
|
|
qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
|
|
bcode = mbuf + (pcihdr % 4);
|
|
|
|
/* Validate signature of PCI data structure. */
|
|
if (memcmp(bcode, "PCIR", 4)) {
|
|
/* Incorrect header. */
|
|
ql_log(ql_log_fatal, vha, 0x005a,
|
|
"PCI data struct not found pcir_adr=%x.\n", pcids);
|
|
ql_dump_buffer(ql_dbg_init, vha, 0x0059, dcode, 32);
|
|
ret = QLA_FUNCTION_FAILED;
|
|
break;
|
|
}
|
|
|
|
/* Read version */
|
|
code_type = bcode[0x14];
|
|
switch (code_type) {
|
|
case ROM_CODE_TYPE_BIOS:
|
|
/* Intel x86, PC-AT compatible. */
|
|
ha->bios_revision[0] = bcode[0x12];
|
|
ha->bios_revision[1] = bcode[0x13];
|
|
ql_dbg(ql_dbg_init, vha, 0x005b,
|
|
"Read BIOS %d.%d.\n",
|
|
ha->bios_revision[1], ha->bios_revision[0]);
|
|
break;
|
|
case ROM_CODE_TYPE_FCODE:
|
|
/* Open Firmware standard for PCI (FCode). */
|
|
ha->fcode_revision[0] = bcode[0x12];
|
|
ha->fcode_revision[1] = bcode[0x13];
|
|
ql_dbg(ql_dbg_init, vha, 0x005c,
|
|
"Read FCODE %d.%d.\n",
|
|
ha->fcode_revision[1], ha->fcode_revision[0]);
|
|
break;
|
|
case ROM_CODE_TYPE_EFI:
|
|
/* Extensible Firmware Interface (EFI). */
|
|
ha->efi_revision[0] = bcode[0x12];
|
|
ha->efi_revision[1] = bcode[0x13];
|
|
ql_dbg(ql_dbg_init, vha, 0x005d,
|
|
"Read EFI %d.%d.\n",
|
|
ha->efi_revision[1], ha->efi_revision[0]);
|
|
break;
|
|
default:
|
|
ql_log(ql_log_warn, vha, 0x005e,
|
|
"Unrecognized code type %x at pcids %x.\n",
|
|
code_type, pcids);
|
|
break;
|
|
}
|
|
|
|
last_image = bcode[0x15] & BIT_7;
|
|
|
|
/* Locate next PCI expansion ROM. */
|
|
pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
|
|
} while (!last_image);
|
|
|
|
/* Read firmware image information. */
|
|
memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
|
|
faddr = ha->flt_region_fw;
|
|
if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
|
|
qla27xx_get_active_image(vha, &active_regions);
|
|
if (active_regions.global == QLA27XX_SECONDARY_IMAGE)
|
|
faddr = ha->flt_region_fw_sec;
|
|
}
|
|
|
|
qla24xx_read_flash_data(vha, dcode, faddr, 8);
|
|
if (qla24xx_risc_firmware_invalid(dcode)) {
|
|
ql_log(ql_log_warn, vha, 0x005f,
|
|
"Unrecognized fw revision at %x.\n",
|
|
ha->flt_region_fw * 4);
|
|
ql_dump_buffer(ql_dbg_init, vha, 0x005f, dcode, 32);
|
|
} else {
|
|
for (i = 0; i < 4; i++)
|
|
ha->fw_revision[i] =
|
|
be32_to_cpu((__force __be32)dcode[4+i]);
|
|
ql_dbg(ql_dbg_init, vha, 0x0060,
|
|
"Firmware revision (flash) %u.%u.%u (%x).\n",
|
|
ha->fw_revision[0], ha->fw_revision[1],
|
|
ha->fw_revision[2], ha->fw_revision[3]);
|
|
}
|
|
|
|
/* Check for golden firmware and get version if available */
|
|
if (!IS_QLA81XX(ha)) {
|
|
/* Golden firmware is not present in non 81XX adapters */
|
|
return ret;
|
|
}
|
|
|
|
memset(ha->gold_fw_version, 0, sizeof(ha->gold_fw_version));
|
|
faddr = ha->flt_region_gold_fw;
|
|
qla24xx_read_flash_data(vha, dcode, ha->flt_region_gold_fw, 8);
|
|
if (qla24xx_risc_firmware_invalid(dcode)) {
|
|
ql_log(ql_log_warn, vha, 0x0056,
|
|
"Unrecognized golden fw at %#x.\n", faddr);
|
|
ql_dump_buffer(ql_dbg_init, vha, 0x0056, dcode, 32);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < 4; i++)
|
|
ha->gold_fw_version[i] =
|
|
be32_to_cpu((__force __be32)dcode[4+i]);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qla2xxx_is_vpd_valid(uint8_t *pos, uint8_t *end)
|
|
{
|
|
if (pos >= end || *pos != 0x82)
|
|
return 0;
|
|
|
|
pos += 3 + pos[1];
|
|
if (pos >= end || *pos != 0x90)
|
|
return 0;
|
|
|
|
pos += 3 + pos[1];
|
|
if (pos >= end || *pos != 0x78)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
qla2xxx_get_vpd_field(scsi_qla_host_t *vha, char *key, char *str, size_t size)
|
|
{
|
|
struct qla_hw_data *ha = vha->hw;
|
|
uint8_t *pos = ha->vpd;
|
|
uint8_t *end = pos + ha->vpd_size;
|
|
int len = 0;
|
|
|
|
if (!IS_FWI2_CAPABLE(ha) || !qla2xxx_is_vpd_valid(pos, end))
|
|
return 0;
|
|
|
|
while (pos < end && *pos != 0x78) {
|
|
len = (*pos == 0x82) ? pos[1] : pos[2];
|
|
|
|
if (!strncmp(pos, key, strlen(key)))
|
|
break;
|
|
|
|
if (*pos != 0x90 && *pos != 0x91)
|
|
pos += len;
|
|
|
|
pos += 3;
|
|
}
|
|
|
|
if (pos < end - len && *pos != 0x78)
|
|
return scnprintf(str, size, "%.*s", len, pos + 3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha)
|
|
{
|
|
int len, max_len;
|
|
uint32_t fcp_prio_addr;
|
|
struct qla_hw_data *ha = vha->hw;
|
|
|
|
if (!ha->fcp_prio_cfg) {
|
|
ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
|
|
if (!ha->fcp_prio_cfg) {
|
|
ql_log(ql_log_warn, vha, 0x00d5,
|
|
"Unable to allocate memory for fcp priority data (%x).\n",
|
|
FCP_PRIO_CFG_SIZE);
|
|
return QLA_FUNCTION_FAILED;
|
|
}
|
|
}
|
|
memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
|
|
|
|
fcp_prio_addr = ha->flt_region_fcp_prio;
|
|
|
|
/* first read the fcp priority data header from flash */
|
|
ha->isp_ops->read_optrom(vha, ha->fcp_prio_cfg,
|
|
fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE);
|
|
|
|
if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 0))
|
|
goto fail;
|
|
|
|
/* read remaining FCP CMD config data from flash */
|
|
fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2);
|
|
len = ha->fcp_prio_cfg->num_entries * sizeof(struct qla_fcp_prio_entry);
|
|
max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE;
|
|
|
|
ha->isp_ops->read_optrom(vha, &ha->fcp_prio_cfg->entry[0],
|
|
fcp_prio_addr << 2, (len < max_len ? len : max_len));
|
|
|
|
/* revalidate the entire FCP priority config data, including entries */
|
|
if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 1))
|
|
goto fail;
|
|
|
|
ha->flags.fcp_prio_enabled = 1;
|
|
return QLA_SUCCESS;
|
|
fail:
|
|
vfree(ha->fcp_prio_cfg);
|
|
ha->fcp_prio_cfg = NULL;
|
|
return QLA_FUNCTION_FAILED;
|
|
}
|