302 lines
8.1 KiB
C
302 lines
8.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Meson GXL and GXM USB2 PHY driver
|
|
*
|
|
* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/* bits [31:27] are read-only */
|
|
#define U2P_R0 0x0
|
|
#define U2P_R0_BYPASS_SEL BIT(0)
|
|
#define U2P_R0_BYPASS_DM_EN BIT(1)
|
|
#define U2P_R0_BYPASS_DP_EN BIT(2)
|
|
#define U2P_R0_TXBITSTUFF_ENH BIT(3)
|
|
#define U2P_R0_TXBITSTUFF_EN BIT(4)
|
|
#define U2P_R0_DM_PULLDOWN BIT(5)
|
|
#define U2P_R0_DP_PULLDOWN BIT(6)
|
|
#define U2P_R0_DP_VBUS_VLD_EXT_SEL BIT(7)
|
|
#define U2P_R0_DP_VBUS_VLD_EXT BIT(8)
|
|
#define U2P_R0_ADP_PRB_EN BIT(9)
|
|
#define U2P_R0_ADP_DISCHARGE BIT(10)
|
|
#define U2P_R0_ADP_CHARGE BIT(11)
|
|
#define U2P_R0_DRV_VBUS BIT(12)
|
|
#define U2P_R0_ID_PULLUP BIT(13)
|
|
#define U2P_R0_LOOPBACK_EN_B BIT(14)
|
|
#define U2P_R0_OTG_DISABLE BIT(15)
|
|
#define U2P_R0_COMMON_ONN BIT(16)
|
|
#define U2P_R0_FSEL_MASK GENMASK(19, 17)
|
|
#define U2P_R0_REF_CLK_SEL_MASK GENMASK(21, 20)
|
|
#define U2P_R0_POWER_ON_RESET BIT(22)
|
|
#define U2P_R0_V_ATE_TEST_EN_B_MASK GENMASK(24, 23)
|
|
#define U2P_R0_ID_SET_ID_DQ BIT(25)
|
|
#define U2P_R0_ATE_RESET BIT(26)
|
|
#define U2P_R0_FSV_MINUS BIT(27)
|
|
#define U2P_R0_FSV_PLUS BIT(28)
|
|
#define U2P_R0_BYPASS_DM_DATA BIT(29)
|
|
#define U2P_R0_BYPASS_DP_DATA BIT(30)
|
|
|
|
#define U2P_R1 0x4
|
|
#define U2P_R1_BURN_IN_TEST BIT(0)
|
|
#define U2P_R1_ACA_ENABLE BIT(1)
|
|
#define U2P_R1_DCD_ENABLE BIT(2)
|
|
#define U2P_R1_VDAT_SRC_EN_B BIT(3)
|
|
#define U2P_R1_VDAT_DET_EN_B BIT(4)
|
|
#define U2P_R1_CHARGES_SEL BIT(5)
|
|
#define U2P_R1_TX_PREEMP_PULSE_TUNE BIT(6)
|
|
#define U2P_R1_TX_PREEMP_AMP_TUNE_MASK GENMASK(8, 7)
|
|
#define U2P_R1_TX_RES_TUNE_MASK GENMASK(10, 9)
|
|
#define U2P_R1_TX_RISE_TUNE_MASK GENMASK(12, 11)
|
|
#define U2P_R1_TX_VREF_TUNE_MASK GENMASK(16, 13)
|
|
#define U2P_R1_TX_FSLS_TUNE_MASK GENMASK(20, 17)
|
|
#define U2P_R1_TX_HSXV_TUNE_MASK GENMASK(22, 21)
|
|
#define U2P_R1_OTG_TUNE_MASK GENMASK(25, 23)
|
|
#define U2P_R1_SQRX_TUNE_MASK GENMASK(28, 26)
|
|
#define U2P_R1_COMP_DIS_TUNE_MASK GENMASK(31, 29)
|
|
|
|
/* bits [31:14] are read-only */
|
|
#define U2P_R2 0x8
|
|
#define U2P_R2_TESTDATA_IN_MASK GENMASK(7, 0)
|
|
#define U2P_R2_TESTADDR_MASK GENMASK(11, 8)
|
|
#define U2P_R2_TESTDATA_OUT_SEL BIT(12)
|
|
#define U2P_R2_TESTCLK BIT(13)
|
|
#define U2P_R2_TESTDATA_OUT_MASK GENMASK(17, 14)
|
|
#define U2P_R2_ACA_PIN_RANGE_C BIT(18)
|
|
#define U2P_R2_ACA_PIN_RANGE_B BIT(19)
|
|
#define U2P_R2_ACA_PIN_RANGE_A BIT(20)
|
|
#define U2P_R2_ACA_PIN_GND BIT(21)
|
|
#define U2P_R2_ACA_PIN_FLOAT BIT(22)
|
|
#define U2P_R2_CHARGE_DETECT BIT(23)
|
|
#define U2P_R2_DEVICE_SESSION_VALID BIT(24)
|
|
#define U2P_R2_ADP_PROBE BIT(25)
|
|
#define U2P_R2_ADP_SENSE BIT(26)
|
|
#define U2P_R2_SESSION_END BIT(27)
|
|
#define U2P_R2_VBUS_VALID BIT(28)
|
|
#define U2P_R2_B_VALID BIT(29)
|
|
#define U2P_R2_A_VALID BIT(30)
|
|
#define U2P_R2_ID_DIG BIT(31)
|
|
|
|
#define U2P_R3 0xc
|
|
|
|
#define RESET_COMPLETE_TIME 500
|
|
|
|
struct phy_meson_gxl_usb2_priv {
|
|
struct regmap *regmap;
|
|
enum phy_mode mode;
|
|
int is_enabled;
|
|
struct clk *clk;
|
|
struct reset_control *reset;
|
|
};
|
|
|
|
static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = {
|
|
.reg_bits = 8,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = U2P_R3,
|
|
};
|
|
|
|
static int phy_meson_gxl_usb2_init(struct phy *phy)
|
|
{
|
|
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
|
|
int ret;
|
|
|
|
ret = reset_control_reset(priv->reset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret) {
|
|
reset_control_rearm(priv->reset);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_gxl_usb2_exit(struct phy *phy)
|
|
{
|
|
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
reset_control_rearm(priv->reset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_gxl_usb2_reset(struct phy *phy)
|
|
{
|
|
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
|
|
|
|
if (priv->is_enabled) {
|
|
/* reset the PHY and wait until settings are stabilized */
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
|
|
U2P_R0_POWER_ON_RESET);
|
|
udelay(RESET_COMPLETE_TIME);
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
|
|
0);
|
|
udelay(RESET_COMPLETE_TIME);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
|
|
enum phy_mode mode, int submode)
|
|
{
|
|
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
|
|
|
|
switch (mode) {
|
|
case PHY_MODE_USB_HOST:
|
|
case PHY_MODE_USB_OTG:
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
|
|
U2P_R0_DM_PULLDOWN);
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
|
|
U2P_R0_DP_PULLDOWN);
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
|
|
U2P_R0_ID_PULLUP);
|
|
break;
|
|
|
|
case PHY_MODE_USB_DEVICE:
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
|
|
0);
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
|
|
0);
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
|
|
U2P_R0_ID_PULLUP);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
phy_meson_gxl_usb2_reset(phy);
|
|
|
|
priv->mode = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_gxl_usb2_power_off(struct phy *phy)
|
|
{
|
|
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
|
|
|
|
priv->is_enabled = 0;
|
|
|
|
/* power off the PHY by putting it into reset mode */
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
|
|
U2P_R0_POWER_ON_RESET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_gxl_usb2_power_on(struct phy *phy)
|
|
{
|
|
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
|
|
int ret;
|
|
|
|
priv->is_enabled = 1;
|
|
|
|
/* power on the PHY by taking it out of reset mode */
|
|
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0);
|
|
|
|
ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode, 0);
|
|
if (ret) {
|
|
phy_meson_gxl_usb2_power_off(phy);
|
|
|
|
dev_err(&phy->dev, "Failed to initialize PHY with mode %d\n",
|
|
priv->mode);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops phy_meson_gxl_usb2_ops = {
|
|
.init = phy_meson_gxl_usb2_init,
|
|
.exit = phy_meson_gxl_usb2_exit,
|
|
.power_on = phy_meson_gxl_usb2_power_on,
|
|
.power_off = phy_meson_gxl_usb2_power_off,
|
|
.set_mode = phy_meson_gxl_usb2_set_mode,
|
|
.reset = phy_meson_gxl_usb2_reset,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct phy_provider *phy_provider;
|
|
struct phy_meson_gxl_usb2_priv *priv;
|
|
struct phy *phy;
|
|
void __iomem *base;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
/* start in host mode */
|
|
priv->mode = PHY_MODE_USB_HOST;
|
|
|
|
priv->regmap = devm_regmap_init_mmio(dev, base,
|
|
&phy_meson_gxl_usb2_regmap_conf);
|
|
if (IS_ERR(priv->regmap))
|
|
return PTR_ERR(priv->regmap);
|
|
|
|
priv->clk = devm_clk_get_optional(dev, "phy");
|
|
if (IS_ERR(priv->clk))
|
|
return PTR_ERR(priv->clk);
|
|
|
|
priv->reset = devm_reset_control_get_optional_shared(dev, "phy");
|
|
if (IS_ERR(priv->reset))
|
|
return PTR_ERR(priv->reset);
|
|
|
|
phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops);
|
|
if (IS_ERR(phy)) {
|
|
ret = PTR_ERR(phy);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to create PHY\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
phy_set_drvdata(phy, priv);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static const struct of_device_id phy_meson_gxl_usb2_of_match[] = {
|
|
{ .compatible = "amlogic,meson-gxl-usb2-phy", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb2_of_match);
|
|
|
|
static struct platform_driver phy_meson_gxl_usb2_driver = {
|
|
.probe = phy_meson_gxl_usb2_probe,
|
|
.driver = {
|
|
.name = "phy-meson-gxl-usb2",
|
|
.of_match_table = phy_meson_gxl_usb2_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(phy_meson_gxl_usb2_driver);
|
|
|
|
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
|
|
MODULE_DESCRIPTION("Meson GXL and GXM USB2 PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|