331 lines
9.1 KiB
C
331 lines
9.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* SQ905C subdriver
|
|
*
|
|
* Copyright (C) 2009 Theodore Kilgore
|
|
*/
|
|
|
|
/*
|
|
*
|
|
* This driver uses work done in
|
|
* libgphoto2/camlibs/digigr8, Copyright (C) Theodore Kilgore.
|
|
*
|
|
* This driver has also used as a base the sq905c driver
|
|
* and may contain code fragments from it.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#define MODULE_NAME "sq905c"
|
|
|
|
#include <linux/workqueue.h>
|
|
#include <linux/slab.h>
|
|
#include "gspca.h"
|
|
|
|
MODULE_AUTHOR("Theodore Kilgore <kilgota@auburn.edu>");
|
|
MODULE_DESCRIPTION("GSPCA/SQ905C USB Camera Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* Default timeouts, in ms */
|
|
#define SQ905C_CMD_TIMEOUT 500
|
|
#define SQ905C_DATA_TIMEOUT 1000
|
|
|
|
/* Maximum transfer size to use. */
|
|
#define SQ905C_MAX_TRANSFER 0x8000
|
|
|
|
#define FRAME_HEADER_LEN 0x50
|
|
|
|
/* Commands. These go in the "value" slot. */
|
|
#define SQ905C_CLEAR 0xa0 /* clear everything */
|
|
#define SQ905C_GET_ID 0x14f4 /* Read version number */
|
|
#define SQ905C_CAPTURE_LOW 0xa040 /* Starts capture at 160x120 */
|
|
#define SQ905C_CAPTURE_MED 0x1440 /* Starts capture at 320x240 */
|
|
#define SQ905C_CAPTURE_HI 0x2840 /* Starts capture at 320x240 */
|
|
|
|
/* For capture, this must go in the "index" slot. */
|
|
#define SQ905C_CAPTURE_INDEX 0x110f
|
|
|
|
/* Structure to hold all of our device specific stuff */
|
|
struct sd {
|
|
struct gspca_dev gspca_dev; /* !! must be the first item */
|
|
const struct v4l2_pix_format *cap_mode;
|
|
/* Driver stuff */
|
|
struct work_struct work_struct;
|
|
struct workqueue_struct *work_thread;
|
|
};
|
|
|
|
/*
|
|
* Most of these cameras will do 640x480 and 320x240. 160x120 works
|
|
* in theory but gives very poor output. Therefore, not supported.
|
|
* The 0x2770:0x9050 cameras have max resolution of 320x240.
|
|
*/
|
|
static struct v4l2_pix_format sq905c_mode[] = {
|
|
{ 320, 240, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
|
|
.bytesperline = 320,
|
|
.sizeimage = 320 * 240,
|
|
.colorspace = V4L2_COLORSPACE_SRGB,
|
|
.priv = 0},
|
|
{ 640, 480, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
|
|
.bytesperline = 640,
|
|
.sizeimage = 640 * 480,
|
|
.colorspace = V4L2_COLORSPACE_SRGB,
|
|
.priv = 0}
|
|
};
|
|
|
|
/* Send a command to the camera. */
|
|
static int sq905c_command(struct gspca_dev *gspca_dev, u16 command, u16 index)
|
|
{
|
|
int ret;
|
|
|
|
ret = usb_control_msg(gspca_dev->dev,
|
|
usb_sndctrlpipe(gspca_dev->dev, 0),
|
|
USB_REQ_SYNCH_FRAME, /* request */
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
command, index, NULL, 0,
|
|
SQ905C_CMD_TIMEOUT);
|
|
if (ret < 0) {
|
|
pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sq905c_read(struct gspca_dev *gspca_dev, u16 command, u16 index,
|
|
int size)
|
|
{
|
|
int ret;
|
|
|
|
ret = usb_control_msg(gspca_dev->dev,
|
|
usb_rcvctrlpipe(gspca_dev->dev, 0),
|
|
USB_REQ_SYNCH_FRAME, /* request */
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
command, index, gspca_dev->usb_buf, size,
|
|
SQ905C_CMD_TIMEOUT);
|
|
if (ret < 0) {
|
|
pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function is called as a workqueue function and runs whenever the camera
|
|
* is streaming data. Because it is a workqueue function it is allowed to sleep
|
|
* so we can use synchronous USB calls. To avoid possible collisions with other
|
|
* threads attempting to use gspca_dev->usb_buf we take the usb_lock when
|
|
* performing USB operations using it. In practice we don't really need this
|
|
* as the camera doesn't provide any controls.
|
|
*/
|
|
static void sq905c_dostream(struct work_struct *work)
|
|
{
|
|
struct sd *dev = container_of(work, struct sd, work_struct);
|
|
struct gspca_dev *gspca_dev = &dev->gspca_dev;
|
|
int bytes_left; /* bytes remaining in current frame. */
|
|
int data_len; /* size to use for the next read. */
|
|
int act_len;
|
|
int packet_type;
|
|
int ret;
|
|
u8 *buffer;
|
|
|
|
buffer = kmalloc(SQ905C_MAX_TRANSFER, GFP_KERNEL);
|
|
if (!buffer) {
|
|
pr_err("Couldn't allocate USB buffer\n");
|
|
goto quit_stream;
|
|
}
|
|
|
|
while (gspca_dev->present && gspca_dev->streaming) {
|
|
#ifdef CONFIG_PM
|
|
if (gspca_dev->frozen)
|
|
break;
|
|
#endif
|
|
/* Request the header, which tells the size to download */
|
|
ret = usb_bulk_msg(gspca_dev->dev,
|
|
usb_rcvbulkpipe(gspca_dev->dev, 0x81),
|
|
buffer, FRAME_HEADER_LEN, &act_len,
|
|
SQ905C_DATA_TIMEOUT);
|
|
gspca_dbg(gspca_dev, D_STREAM,
|
|
"Got %d bytes out of %d for header\n",
|
|
act_len, FRAME_HEADER_LEN);
|
|
if (ret < 0 || act_len < FRAME_HEADER_LEN)
|
|
goto quit_stream;
|
|
/* size is read from 4 bytes starting 0x40, little endian */
|
|
bytes_left = buffer[0x40]|(buffer[0x41]<<8)|(buffer[0x42]<<16)
|
|
|(buffer[0x43]<<24);
|
|
gspca_dbg(gspca_dev, D_STREAM, "bytes_left = 0x%x\n",
|
|
bytes_left);
|
|
/* We keep the header. It has other information, too. */
|
|
packet_type = FIRST_PACKET;
|
|
gspca_frame_add(gspca_dev, packet_type,
|
|
buffer, FRAME_HEADER_LEN);
|
|
while (bytes_left > 0 && gspca_dev->present) {
|
|
data_len = bytes_left > SQ905C_MAX_TRANSFER ?
|
|
SQ905C_MAX_TRANSFER : bytes_left;
|
|
ret = usb_bulk_msg(gspca_dev->dev,
|
|
usb_rcvbulkpipe(gspca_dev->dev, 0x81),
|
|
buffer, data_len, &act_len,
|
|
SQ905C_DATA_TIMEOUT);
|
|
if (ret < 0 || act_len < data_len)
|
|
goto quit_stream;
|
|
gspca_dbg(gspca_dev, D_STREAM,
|
|
"Got %d bytes out of %d for frame\n",
|
|
data_len, bytes_left);
|
|
bytes_left -= data_len;
|
|
if (bytes_left == 0)
|
|
packet_type = LAST_PACKET;
|
|
else
|
|
packet_type = INTER_PACKET;
|
|
gspca_frame_add(gspca_dev, packet_type,
|
|
buffer, data_len);
|
|
}
|
|
}
|
|
quit_stream:
|
|
if (gspca_dev->present) {
|
|
mutex_lock(&gspca_dev->usb_lock);
|
|
sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
|
|
mutex_unlock(&gspca_dev->usb_lock);
|
|
}
|
|
kfree(buffer);
|
|
}
|
|
|
|
/* This function is called at probe time just before sd_init */
|
|
static int sd_config(struct gspca_dev *gspca_dev,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct cam *cam = &gspca_dev->cam;
|
|
struct sd *dev = (struct sd *) gspca_dev;
|
|
int ret;
|
|
|
|
gspca_dbg(gspca_dev, D_PROBE,
|
|
"SQ9050 camera detected (vid/pid 0x%04X:0x%04X)\n",
|
|
id->idVendor, id->idProduct);
|
|
|
|
ret = sq905c_command(gspca_dev, SQ905C_GET_ID, 0);
|
|
if (ret < 0) {
|
|
gspca_err(gspca_dev, "Get version command failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = sq905c_read(gspca_dev, 0xf5, 0, 20);
|
|
if (ret < 0) {
|
|
gspca_err(gspca_dev, "Reading version command failed\n");
|
|
return ret;
|
|
}
|
|
/* Note we leave out the usb id and the manufacturing date */
|
|
gspca_dbg(gspca_dev, D_PROBE,
|
|
"SQ9050 ID string: %02x - %*ph\n",
|
|
gspca_dev->usb_buf[3], 6, gspca_dev->usb_buf + 14);
|
|
|
|
cam->cam_mode = sq905c_mode;
|
|
cam->nmodes = 2;
|
|
if (gspca_dev->usb_buf[15] == 0)
|
|
cam->nmodes = 1;
|
|
/* We don't use the buffer gspca allocates so make it small. */
|
|
cam->bulk_size = 32;
|
|
cam->bulk = 1;
|
|
INIT_WORK(&dev->work_struct, sq905c_dostream);
|
|
return 0;
|
|
}
|
|
|
|
/* called on streamoff with alt==0 and on disconnect */
|
|
/* the usb_lock is held at entry - restore on exit */
|
|
static void sd_stop0(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *dev = (struct sd *) gspca_dev;
|
|
|
|
/* wait for the work queue to terminate */
|
|
mutex_unlock(&gspca_dev->usb_lock);
|
|
/* This waits for sq905c_dostream to finish */
|
|
destroy_workqueue(dev->work_thread);
|
|
dev->work_thread = NULL;
|
|
mutex_lock(&gspca_dev->usb_lock);
|
|
}
|
|
|
|
/* this function is called at probe and resume time */
|
|
static int sd_init(struct gspca_dev *gspca_dev)
|
|
{
|
|
/* connect to the camera and reset it. */
|
|
return sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
|
|
}
|
|
|
|
/* Set up for getting frames. */
|
|
static int sd_start(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *dev = (struct sd *) gspca_dev;
|
|
int ret;
|
|
|
|
dev->cap_mode = gspca_dev->cam.cam_mode;
|
|
/* "Open the shutter" and set size, to start capture */
|
|
switch (gspca_dev->pixfmt.width) {
|
|
case 640:
|
|
gspca_dbg(gspca_dev, D_STREAM, "Start streaming at high resolution\n");
|
|
dev->cap_mode++;
|
|
ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_HI,
|
|
SQ905C_CAPTURE_INDEX);
|
|
break;
|
|
default: /* 320 */
|
|
gspca_dbg(gspca_dev, D_STREAM, "Start streaming at medium resolution\n");
|
|
ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_MED,
|
|
SQ905C_CAPTURE_INDEX);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
gspca_err(gspca_dev, "Start streaming command failed\n");
|
|
return ret;
|
|
}
|
|
/* Start the workqueue function to do the streaming */
|
|
dev->work_thread = create_singlethread_workqueue(MODULE_NAME);
|
|
if (!dev->work_thread)
|
|
return -ENOMEM;
|
|
|
|
queue_work(dev->work_thread, &dev->work_struct);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Table of supported USB devices */
|
|
static const struct usb_device_id device_table[] = {
|
|
{USB_DEVICE(0x2770, 0x905c)},
|
|
{USB_DEVICE(0x2770, 0x9050)},
|
|
{USB_DEVICE(0x2770, 0x9051)},
|
|
{USB_DEVICE(0x2770, 0x9052)},
|
|
{USB_DEVICE(0x2770, 0x913d)},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, device_table);
|
|
|
|
/* sub-driver description */
|
|
static const struct sd_desc sd_desc = {
|
|
.name = MODULE_NAME,
|
|
.config = sd_config,
|
|
.init = sd_init,
|
|
.start = sd_start,
|
|
.stop0 = sd_stop0,
|
|
};
|
|
|
|
/* -- device connect -- */
|
|
static int sd_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
return gspca_dev_probe(intf, id,
|
|
&sd_desc,
|
|
sizeof(struct sd),
|
|
THIS_MODULE);
|
|
}
|
|
|
|
static struct usb_driver sd_driver = {
|
|
.name = MODULE_NAME,
|
|
.id_table = device_table,
|
|
.probe = sd_probe,
|
|
.disconnect = gspca_disconnect,
|
|
#ifdef CONFIG_PM
|
|
.suspend = gspca_suspend,
|
|
.resume = gspca_resume,
|
|
.reset_resume = gspca_resume,
|
|
#endif
|
|
};
|
|
|
|
module_usb_driver(sd_driver);
|