2761 lines
77 KiB
C
2761 lines
77 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* ispccdc.c
|
|
*
|
|
* TI OMAP3 ISP - CCDC module
|
|
*
|
|
* Copyright (C) 2009-2010 Nokia Corporation
|
|
* Copyright (C) 2009 Texas Instruments, Inc.
|
|
*
|
|
* Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
* Sakari Ailus <sakari.ailus@iki.fi>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <media/v4l2-event.h>
|
|
|
|
#include "isp.h"
|
|
#include "ispreg.h"
|
|
#include "ispccdc.h"
|
|
|
|
#define CCDC_MIN_WIDTH 32
|
|
#define CCDC_MIN_HEIGHT 32
|
|
|
|
static struct v4l2_mbus_framefmt *
|
|
__ccdc_get_format(struct isp_ccdc_device *ccdc,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad, enum v4l2_subdev_format_whence which);
|
|
|
|
static const unsigned int ccdc_fmts[] = {
|
|
MEDIA_BUS_FMT_Y8_1X8,
|
|
MEDIA_BUS_FMT_Y10_1X10,
|
|
MEDIA_BUS_FMT_Y12_1X12,
|
|
MEDIA_BUS_FMT_SGRBG8_1X8,
|
|
MEDIA_BUS_FMT_SRGGB8_1X8,
|
|
MEDIA_BUS_FMT_SBGGR8_1X8,
|
|
MEDIA_BUS_FMT_SGBRG8_1X8,
|
|
MEDIA_BUS_FMT_SGRBG10_1X10,
|
|
MEDIA_BUS_FMT_SRGGB10_1X10,
|
|
MEDIA_BUS_FMT_SBGGR10_1X10,
|
|
MEDIA_BUS_FMT_SGBRG10_1X10,
|
|
MEDIA_BUS_FMT_SGRBG12_1X12,
|
|
MEDIA_BUS_FMT_SRGGB12_1X12,
|
|
MEDIA_BUS_FMT_SBGGR12_1X12,
|
|
MEDIA_BUS_FMT_SGBRG12_1X12,
|
|
MEDIA_BUS_FMT_YUYV8_2X8,
|
|
MEDIA_BUS_FMT_UYVY8_2X8,
|
|
};
|
|
|
|
/*
|
|
* ccdc_print_status - Print current CCDC Module register values.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*
|
|
* Also prints other debug information stored in the CCDC module.
|
|
*/
|
|
#define CCDC_PRINT_REGISTER(isp, name)\
|
|
dev_dbg(isp->dev, "###CCDC " #name "=0x%08x\n", \
|
|
isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_##name))
|
|
|
|
static void ccdc_print_status(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
dev_dbg(isp->dev, "-------------CCDC Register dump-------------\n");
|
|
|
|
CCDC_PRINT_REGISTER(isp, PCR);
|
|
CCDC_PRINT_REGISTER(isp, SYN_MODE);
|
|
CCDC_PRINT_REGISTER(isp, HD_VD_WID);
|
|
CCDC_PRINT_REGISTER(isp, PIX_LINES);
|
|
CCDC_PRINT_REGISTER(isp, HORZ_INFO);
|
|
CCDC_PRINT_REGISTER(isp, VERT_START);
|
|
CCDC_PRINT_REGISTER(isp, VERT_LINES);
|
|
CCDC_PRINT_REGISTER(isp, CULLING);
|
|
CCDC_PRINT_REGISTER(isp, HSIZE_OFF);
|
|
CCDC_PRINT_REGISTER(isp, SDOFST);
|
|
CCDC_PRINT_REGISTER(isp, SDR_ADDR);
|
|
CCDC_PRINT_REGISTER(isp, CLAMP);
|
|
CCDC_PRINT_REGISTER(isp, DCSUB);
|
|
CCDC_PRINT_REGISTER(isp, COLPTN);
|
|
CCDC_PRINT_REGISTER(isp, BLKCMP);
|
|
CCDC_PRINT_REGISTER(isp, FPC);
|
|
CCDC_PRINT_REGISTER(isp, FPC_ADDR);
|
|
CCDC_PRINT_REGISTER(isp, VDINT);
|
|
CCDC_PRINT_REGISTER(isp, ALAW);
|
|
CCDC_PRINT_REGISTER(isp, REC656IF);
|
|
CCDC_PRINT_REGISTER(isp, CFG);
|
|
CCDC_PRINT_REGISTER(isp, FMTCFG);
|
|
CCDC_PRINT_REGISTER(isp, FMT_HORZ);
|
|
CCDC_PRINT_REGISTER(isp, FMT_VERT);
|
|
CCDC_PRINT_REGISTER(isp, PRGEVEN0);
|
|
CCDC_PRINT_REGISTER(isp, PRGEVEN1);
|
|
CCDC_PRINT_REGISTER(isp, PRGODD0);
|
|
CCDC_PRINT_REGISTER(isp, PRGODD1);
|
|
CCDC_PRINT_REGISTER(isp, VP_OUT);
|
|
CCDC_PRINT_REGISTER(isp, LSC_CONFIG);
|
|
CCDC_PRINT_REGISTER(isp, LSC_INITIAL);
|
|
CCDC_PRINT_REGISTER(isp, LSC_TABLE_BASE);
|
|
CCDC_PRINT_REGISTER(isp, LSC_TABLE_OFFSET);
|
|
|
|
dev_dbg(isp->dev, "--------------------------------------------\n");
|
|
}
|
|
|
|
/*
|
|
* omap3isp_ccdc_busy - Get busy state of the CCDC.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*/
|
|
int omap3isp_ccdc_busy(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
return isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PCR) &
|
|
ISPCCDC_PCR_BUSY;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Lens Shading Compensation
|
|
*/
|
|
|
|
/*
|
|
* ccdc_lsc_validate_config - Check that LSC configuration is valid.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @lsc_cfg: the LSC configuration to check.
|
|
*
|
|
* Returns 0 if the LSC configuration is valid, or -EINVAL if invalid.
|
|
*/
|
|
static int ccdc_lsc_validate_config(struct isp_ccdc_device *ccdc,
|
|
struct omap3isp_ccdc_lsc_config *lsc_cfg)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
struct v4l2_mbus_framefmt *format;
|
|
unsigned int paxel_width, paxel_height;
|
|
unsigned int paxel_shift_x, paxel_shift_y;
|
|
unsigned int min_width, min_height, min_size;
|
|
unsigned int input_width, input_height;
|
|
|
|
paxel_shift_x = lsc_cfg->gain_mode_m;
|
|
paxel_shift_y = lsc_cfg->gain_mode_n;
|
|
|
|
if ((paxel_shift_x < 2) || (paxel_shift_x > 6) ||
|
|
(paxel_shift_y < 2) || (paxel_shift_y > 6)) {
|
|
dev_dbg(isp->dev, "CCDC: LSC: Invalid paxel size\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (lsc_cfg->offset & 3) {
|
|
dev_dbg(isp->dev,
|
|
"CCDC: LSC: Offset must be a multiple of 4\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((lsc_cfg->initial_x & 1) || (lsc_cfg->initial_y & 1)) {
|
|
dev_dbg(isp->dev, "CCDC: LSC: initial_x and y must be even\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
format = __ccdc_get_format(ccdc, NULL, CCDC_PAD_SINK,
|
|
V4L2_SUBDEV_FORMAT_ACTIVE);
|
|
input_width = format->width;
|
|
input_height = format->height;
|
|
|
|
/* Calculate minimum bytesize for validation */
|
|
paxel_width = 1 << paxel_shift_x;
|
|
min_width = ((input_width + lsc_cfg->initial_x + paxel_width - 1)
|
|
>> paxel_shift_x) + 1;
|
|
|
|
paxel_height = 1 << paxel_shift_y;
|
|
min_height = ((input_height + lsc_cfg->initial_y + paxel_height - 1)
|
|
>> paxel_shift_y) + 1;
|
|
|
|
min_size = 4 * min_width * min_height;
|
|
if (min_size > lsc_cfg->size) {
|
|
dev_dbg(isp->dev, "CCDC: LSC: too small table\n");
|
|
return -EINVAL;
|
|
}
|
|
if (lsc_cfg->offset < (min_width * 4)) {
|
|
dev_dbg(isp->dev, "CCDC: LSC: Offset is too small\n");
|
|
return -EINVAL;
|
|
}
|
|
if ((lsc_cfg->size / lsc_cfg->offset) < min_height) {
|
|
dev_dbg(isp->dev, "CCDC: LSC: Wrong size/offset combination\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ccdc_lsc_program_table - Program Lens Shading Compensation table address.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*/
|
|
static void ccdc_lsc_program_table(struct isp_ccdc_device *ccdc,
|
|
dma_addr_t addr)
|
|
{
|
|
isp_reg_writel(to_isp_device(ccdc), addr,
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_TABLE_BASE);
|
|
}
|
|
|
|
/*
|
|
* ccdc_lsc_setup_regs - Configures the lens shading compensation module
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*/
|
|
static void ccdc_lsc_setup_regs(struct isp_ccdc_device *ccdc,
|
|
struct omap3isp_ccdc_lsc_config *cfg)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
int reg;
|
|
|
|
isp_reg_writel(isp, cfg->offset, OMAP3_ISP_IOMEM_CCDC,
|
|
ISPCCDC_LSC_TABLE_OFFSET);
|
|
|
|
reg = 0;
|
|
reg |= cfg->gain_mode_n << ISPCCDC_LSC_GAIN_MODE_N_SHIFT;
|
|
reg |= cfg->gain_mode_m << ISPCCDC_LSC_GAIN_MODE_M_SHIFT;
|
|
reg |= cfg->gain_format << ISPCCDC_LSC_GAIN_FORMAT_SHIFT;
|
|
isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG);
|
|
|
|
reg = 0;
|
|
reg &= ~ISPCCDC_LSC_INITIAL_X_MASK;
|
|
reg |= cfg->initial_x << ISPCCDC_LSC_INITIAL_X_SHIFT;
|
|
reg &= ~ISPCCDC_LSC_INITIAL_Y_MASK;
|
|
reg |= cfg->initial_y << ISPCCDC_LSC_INITIAL_Y_SHIFT;
|
|
isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_CCDC,
|
|
ISPCCDC_LSC_INITIAL);
|
|
}
|
|
|
|
static int ccdc_lsc_wait_prefetch(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
unsigned int wait;
|
|
|
|
isp_reg_writel(isp, IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ,
|
|
OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS);
|
|
|
|
/* timeout 1 ms */
|
|
for (wait = 0; wait < 1000; wait++) {
|
|
if (isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS) &
|
|
IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ) {
|
|
isp_reg_writel(isp, IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ,
|
|
OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS);
|
|
return 0;
|
|
}
|
|
|
|
rmb();
|
|
udelay(1);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/*
|
|
* __ccdc_lsc_enable - Enables/Disables the Lens Shading Compensation module.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @enable: 0 Disables LSC, 1 Enables LSC.
|
|
*/
|
|
static int __ccdc_lsc_enable(struct isp_ccdc_device *ccdc, int enable)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
const struct v4l2_mbus_framefmt *format =
|
|
__ccdc_get_format(ccdc, NULL, CCDC_PAD_SINK,
|
|
V4L2_SUBDEV_FORMAT_ACTIVE);
|
|
|
|
if ((format->code != MEDIA_BUS_FMT_SGRBG10_1X10) &&
|
|
(format->code != MEDIA_BUS_FMT_SRGGB10_1X10) &&
|
|
(format->code != MEDIA_BUS_FMT_SBGGR10_1X10) &&
|
|
(format->code != MEDIA_BUS_FMT_SGBRG10_1X10))
|
|
return -EINVAL;
|
|
|
|
if (enable)
|
|
omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CCDC_LSC_READ);
|
|
|
|
isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG,
|
|
ISPCCDC_LSC_ENABLE, enable ? ISPCCDC_LSC_ENABLE : 0);
|
|
|
|
if (enable) {
|
|
if (ccdc_lsc_wait_prefetch(ccdc) < 0) {
|
|
isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC,
|
|
ISPCCDC_LSC_CONFIG, ISPCCDC_LSC_ENABLE);
|
|
ccdc->lsc.state = LSC_STATE_STOPPED;
|
|
dev_warn(to_device(ccdc), "LSC prefetch timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
ccdc->lsc.state = LSC_STATE_RUNNING;
|
|
} else {
|
|
ccdc->lsc.state = LSC_STATE_STOPPING;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ccdc_lsc_busy(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
return isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG) &
|
|
ISPCCDC_LSC_BUSY;
|
|
}
|
|
|
|
/*
|
|
* __ccdc_lsc_configure - Apply a new configuration to the LSC engine
|
|
* @ccdc: Pointer to ISP CCDC device
|
|
* @req: New configuration request
|
|
*/
|
|
static int __ccdc_lsc_configure(struct isp_ccdc_device *ccdc,
|
|
struct ispccdc_lsc_config_req *req)
|
|
{
|
|
if (!req->enable)
|
|
return -EINVAL;
|
|
|
|
if (ccdc_lsc_validate_config(ccdc, &req->config) < 0) {
|
|
dev_dbg(to_device(ccdc), "Discard LSC configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ccdc_lsc_busy(ccdc))
|
|
return -EBUSY;
|
|
|
|
ccdc_lsc_setup_regs(ccdc, &req->config);
|
|
ccdc_lsc_program_table(ccdc, req->table.dma);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ccdc_lsc_error_handler - Handle LSC prefetch error scenario.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*
|
|
* Disables LSC, and defers enablement to shadow registers update time.
|
|
*/
|
|
static void ccdc_lsc_error_handler(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
/*
|
|
* From OMAP3 TRM: When this event is pending, the module
|
|
* goes into transparent mode (output =input). Normal
|
|
* operation can be resumed at the start of the next frame
|
|
* after:
|
|
* 1) Clearing this event
|
|
* 2) Disabling the LSC module
|
|
* 3) Enabling it
|
|
*/
|
|
isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG,
|
|
ISPCCDC_LSC_ENABLE);
|
|
ccdc->lsc.state = LSC_STATE_STOPPED;
|
|
}
|
|
|
|
static void ccdc_lsc_free_request(struct isp_ccdc_device *ccdc,
|
|
struct ispccdc_lsc_config_req *req)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
if (req == NULL)
|
|
return;
|
|
|
|
if (req->table.addr) {
|
|
sg_free_table(&req->table.sgt);
|
|
dma_free_coherent(isp->dev, req->config.size, req->table.addr,
|
|
req->table.dma);
|
|
}
|
|
|
|
kfree(req);
|
|
}
|
|
|
|
static void ccdc_lsc_free_queue(struct isp_ccdc_device *ccdc,
|
|
struct list_head *queue)
|
|
{
|
|
struct ispccdc_lsc_config_req *req, *n;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
|
|
list_for_each_entry_safe(req, n, queue, list) {
|
|
list_del(&req->list);
|
|
spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
|
|
ccdc_lsc_free_request(ccdc, req);
|
|
spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
|
|
}
|
|
spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
|
|
}
|
|
|
|
static void ccdc_lsc_free_table_work(struct work_struct *work)
|
|
{
|
|
struct isp_ccdc_device *ccdc;
|
|
struct ispccdc_lsc *lsc;
|
|
|
|
lsc = container_of(work, struct ispccdc_lsc, table_work);
|
|
ccdc = container_of(lsc, struct isp_ccdc_device, lsc);
|
|
|
|
ccdc_lsc_free_queue(ccdc, &lsc->free_queue);
|
|
}
|
|
|
|
/*
|
|
* ccdc_lsc_config - Configure the LSC module from a userspace request
|
|
*
|
|
* Store the request LSC configuration in the LSC engine request pointer. The
|
|
* configuration will be applied to the hardware when the CCDC will be enabled,
|
|
* or at the next LSC interrupt if the CCDC is already running.
|
|
*/
|
|
static int ccdc_lsc_config(struct isp_ccdc_device *ccdc,
|
|
struct omap3isp_ccdc_update_config *config)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
struct ispccdc_lsc_config_req *req;
|
|
unsigned long flags;
|
|
u16 update;
|
|
int ret;
|
|
|
|
update = config->update &
|
|
(OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC);
|
|
if (!update)
|
|
return 0;
|
|
|
|
if (update != (OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC)) {
|
|
dev_dbg(to_device(ccdc),
|
|
"%s: Both LSC configuration and table need to be supplied\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
req = kzalloc(sizeof(*req), GFP_KERNEL);
|
|
if (req == NULL)
|
|
return -ENOMEM;
|
|
|
|
if (config->flag & OMAP3ISP_CCDC_CONFIG_LSC) {
|
|
if (copy_from_user(&req->config, config->lsc_cfg,
|
|
sizeof(req->config))) {
|
|
ret = -EFAULT;
|
|
goto done;
|
|
}
|
|
|
|
req->enable = 1;
|
|
|
|
req->table.addr = dma_alloc_coherent(isp->dev, req->config.size,
|
|
&req->table.dma,
|
|
GFP_KERNEL);
|
|
if (req->table.addr == NULL) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
ret = dma_get_sgtable(isp->dev, &req->table.sgt,
|
|
req->table.addr, req->table.dma,
|
|
req->config.size);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
dma_sync_sg_for_cpu(isp->dev, req->table.sgt.sgl,
|
|
req->table.sgt.nents, DMA_TO_DEVICE);
|
|
|
|
if (copy_from_user(req->table.addr, config->lsc,
|
|
req->config.size)) {
|
|
ret = -EFAULT;
|
|
goto done;
|
|
}
|
|
|
|
dma_sync_sg_for_device(isp->dev, req->table.sgt.sgl,
|
|
req->table.sgt.nents, DMA_TO_DEVICE);
|
|
}
|
|
|
|
spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
|
|
if (ccdc->lsc.request) {
|
|
list_add_tail(&ccdc->lsc.request->list, &ccdc->lsc.free_queue);
|
|
schedule_work(&ccdc->lsc.table_work);
|
|
}
|
|
ccdc->lsc.request = req;
|
|
spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
|
|
|
|
ret = 0;
|
|
|
|
done:
|
|
if (ret < 0)
|
|
ccdc_lsc_free_request(ccdc, req);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int ccdc_lsc_is_configured(struct isp_ccdc_device *ccdc)
|
|
{
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
|
|
ret = ccdc->lsc.active != NULL;
|
|
spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ccdc_lsc_enable(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct ispccdc_lsc *lsc = &ccdc->lsc;
|
|
|
|
if (lsc->state != LSC_STATE_STOPPED)
|
|
return -EINVAL;
|
|
|
|
if (lsc->active) {
|
|
list_add_tail(&lsc->active->list, &lsc->free_queue);
|
|
lsc->active = NULL;
|
|
}
|
|
|
|
if (__ccdc_lsc_configure(ccdc, lsc->request) < 0) {
|
|
omap3isp_sbl_disable(to_isp_device(ccdc),
|
|
OMAP3_ISP_SBL_CCDC_LSC_READ);
|
|
list_add_tail(&lsc->request->list, &lsc->free_queue);
|
|
lsc->request = NULL;
|
|
goto done;
|
|
}
|
|
|
|
lsc->active = lsc->request;
|
|
lsc->request = NULL;
|
|
__ccdc_lsc_enable(ccdc, 1);
|
|
|
|
done:
|
|
if (!list_empty(&lsc->free_queue))
|
|
schedule_work(&lsc->table_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Parameters configuration
|
|
*/
|
|
|
|
/*
|
|
* ccdc_configure_clamp - Configure optical-black or digital clamping
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*
|
|
* The CCDC performs either optical-black or digital clamp. Configure and enable
|
|
* the selected clamp method.
|
|
*/
|
|
static void ccdc_configure_clamp(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
u32 clamp;
|
|
|
|
if (ccdc->obclamp) {
|
|
clamp = ccdc->clamp.obgain << ISPCCDC_CLAMP_OBGAIN_SHIFT;
|
|
clamp |= ccdc->clamp.oblen << ISPCCDC_CLAMP_OBSLEN_SHIFT;
|
|
clamp |= ccdc->clamp.oblines << ISPCCDC_CLAMP_OBSLN_SHIFT;
|
|
clamp |= ccdc->clamp.obstpixel << ISPCCDC_CLAMP_OBST_SHIFT;
|
|
isp_reg_writel(isp, clamp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CLAMP);
|
|
} else {
|
|
isp_reg_writel(isp, ccdc->clamp.dcsubval,
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_DCSUB);
|
|
}
|
|
|
|
isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CLAMP,
|
|
ISPCCDC_CLAMP_CLAMPEN,
|
|
ccdc->obclamp ? ISPCCDC_CLAMP_CLAMPEN : 0);
|
|
}
|
|
|
|
/*
|
|
* ccdc_configure_fpc - Configure Faulty Pixel Correction
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*/
|
|
static void ccdc_configure_fpc(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC, ISPCCDC_FPC_FPCEN);
|
|
|
|
if (!ccdc->fpc_en)
|
|
return;
|
|
|
|
isp_reg_writel(isp, ccdc->fpc.dma, OMAP3_ISP_IOMEM_CCDC,
|
|
ISPCCDC_FPC_ADDR);
|
|
/* The FPNUM field must be set before enabling FPC. */
|
|
isp_reg_writel(isp, (ccdc->fpc.fpnum << ISPCCDC_FPC_FPNUM_SHIFT),
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC);
|
|
isp_reg_writel(isp, (ccdc->fpc.fpnum << ISPCCDC_FPC_FPNUM_SHIFT) |
|
|
ISPCCDC_FPC_FPCEN, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC);
|
|
}
|
|
|
|
/*
|
|
* ccdc_configure_black_comp - Configure Black Level Compensation.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*/
|
|
static void ccdc_configure_black_comp(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
u32 blcomp;
|
|
|
|
blcomp = ccdc->blcomp.b_mg << ISPCCDC_BLKCMP_B_MG_SHIFT;
|
|
blcomp |= ccdc->blcomp.gb_g << ISPCCDC_BLKCMP_GB_G_SHIFT;
|
|
blcomp |= ccdc->blcomp.gr_cy << ISPCCDC_BLKCMP_GR_CY_SHIFT;
|
|
blcomp |= ccdc->blcomp.r_ye << ISPCCDC_BLKCMP_R_YE_SHIFT;
|
|
|
|
isp_reg_writel(isp, blcomp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_BLKCMP);
|
|
}
|
|
|
|
/*
|
|
* ccdc_configure_lpf - Configure Low-Pass Filter (LPF).
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*/
|
|
static void ccdc_configure_lpf(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE,
|
|
ISPCCDC_SYN_MODE_LPF,
|
|
ccdc->lpf ? ISPCCDC_SYN_MODE_LPF : 0);
|
|
}
|
|
|
|
/*
|
|
* ccdc_configure_alaw - Configure A-law compression.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*/
|
|
static void ccdc_configure_alaw(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
const struct isp_format_info *info;
|
|
u32 alaw = 0;
|
|
|
|
info = omap3isp_video_format_info(ccdc->formats[CCDC_PAD_SINK].code);
|
|
|
|
switch (info->width) {
|
|
case 8:
|
|
return;
|
|
|
|
case 10:
|
|
alaw = ISPCCDC_ALAW_GWDI_9_0;
|
|
break;
|
|
case 11:
|
|
alaw = ISPCCDC_ALAW_GWDI_10_1;
|
|
break;
|
|
case 12:
|
|
alaw = ISPCCDC_ALAW_GWDI_11_2;
|
|
break;
|
|
case 13:
|
|
alaw = ISPCCDC_ALAW_GWDI_12_3;
|
|
break;
|
|
}
|
|
|
|
if (ccdc->alaw)
|
|
alaw |= ISPCCDC_ALAW_CCDTBL;
|
|
|
|
isp_reg_writel(isp, alaw, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_ALAW);
|
|
}
|
|
|
|
/*
|
|
* ccdc_config_imgattr - Configure sensor image specific attributes.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @colptn: Color pattern of the sensor.
|
|
*/
|
|
static void ccdc_config_imgattr(struct isp_ccdc_device *ccdc, u32 colptn)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
isp_reg_writel(isp, colptn, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_COLPTN);
|
|
}
|
|
|
|
/*
|
|
* ccdc_config - Set CCDC configuration from userspace
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @ccdc_struct: Structure containing CCDC configuration sent from userspace.
|
|
*
|
|
* Returns 0 if successful, -EINVAL if the pointer to the configuration
|
|
* structure is null, or the copy_from_user function fails to copy user space
|
|
* memory to kernel space memory.
|
|
*/
|
|
static int ccdc_config(struct isp_ccdc_device *ccdc,
|
|
struct omap3isp_ccdc_update_config *ccdc_struct)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ccdc->lock, flags);
|
|
ccdc->shadow_update = 1;
|
|
spin_unlock_irqrestore(&ccdc->lock, flags);
|
|
|
|
if (OMAP3ISP_CCDC_ALAW & ccdc_struct->update) {
|
|
ccdc->alaw = !!(OMAP3ISP_CCDC_ALAW & ccdc_struct->flag);
|
|
ccdc->update |= OMAP3ISP_CCDC_ALAW;
|
|
}
|
|
|
|
if (OMAP3ISP_CCDC_LPF & ccdc_struct->update) {
|
|
ccdc->lpf = !!(OMAP3ISP_CCDC_LPF & ccdc_struct->flag);
|
|
ccdc->update |= OMAP3ISP_CCDC_LPF;
|
|
}
|
|
|
|
if (OMAP3ISP_CCDC_BLCLAMP & ccdc_struct->update) {
|
|
if (copy_from_user(&ccdc->clamp, ccdc_struct->bclamp,
|
|
sizeof(ccdc->clamp))) {
|
|
ccdc->shadow_update = 0;
|
|
return -EFAULT;
|
|
}
|
|
|
|
ccdc->obclamp = !!(OMAP3ISP_CCDC_BLCLAMP & ccdc_struct->flag);
|
|
ccdc->update |= OMAP3ISP_CCDC_BLCLAMP;
|
|
}
|
|
|
|
if (OMAP3ISP_CCDC_BCOMP & ccdc_struct->update) {
|
|
if (copy_from_user(&ccdc->blcomp, ccdc_struct->blcomp,
|
|
sizeof(ccdc->blcomp))) {
|
|
ccdc->shadow_update = 0;
|
|
return -EFAULT;
|
|
}
|
|
|
|
ccdc->update |= OMAP3ISP_CCDC_BCOMP;
|
|
}
|
|
|
|
ccdc->shadow_update = 0;
|
|
|
|
if (OMAP3ISP_CCDC_FPC & ccdc_struct->update) {
|
|
struct omap3isp_ccdc_fpc fpc;
|
|
struct ispccdc_fpc fpc_old = { .addr = NULL, };
|
|
struct ispccdc_fpc fpc_new;
|
|
u32 size;
|
|
|
|
if (ccdc->state != ISP_PIPELINE_STREAM_STOPPED)
|
|
return -EBUSY;
|
|
|
|
ccdc->fpc_en = !!(OMAP3ISP_CCDC_FPC & ccdc_struct->flag);
|
|
|
|
if (ccdc->fpc_en) {
|
|
if (copy_from_user(&fpc, ccdc_struct->fpc, sizeof(fpc)))
|
|
return -EFAULT;
|
|
|
|
size = fpc.fpnum * 4;
|
|
|
|
/*
|
|
* The table address must be 64-bytes aligned, which is
|
|
* guaranteed by dma_alloc_coherent().
|
|
*/
|
|
fpc_new.fpnum = fpc.fpnum;
|
|
fpc_new.addr = dma_alloc_coherent(isp->dev, size,
|
|
&fpc_new.dma,
|
|
GFP_KERNEL);
|
|
if (fpc_new.addr == NULL)
|
|
return -ENOMEM;
|
|
|
|
if (copy_from_user(fpc_new.addr,
|
|
(__force void __user *)(long)fpc.fpcaddr,
|
|
size)) {
|
|
dma_free_coherent(isp->dev, size, fpc_new.addr,
|
|
fpc_new.dma);
|
|
return -EFAULT;
|
|
}
|
|
|
|
fpc_old = ccdc->fpc;
|
|
ccdc->fpc = fpc_new;
|
|
}
|
|
|
|
ccdc_configure_fpc(ccdc);
|
|
|
|
if (fpc_old.addr != NULL)
|
|
dma_free_coherent(isp->dev, fpc_old.fpnum * 4,
|
|
fpc_old.addr, fpc_old.dma);
|
|
}
|
|
|
|
return ccdc_lsc_config(ccdc, ccdc_struct);
|
|
}
|
|
|
|
static void ccdc_apply_controls(struct isp_ccdc_device *ccdc)
|
|
{
|
|
if (ccdc->update & OMAP3ISP_CCDC_ALAW) {
|
|
ccdc_configure_alaw(ccdc);
|
|
ccdc->update &= ~OMAP3ISP_CCDC_ALAW;
|
|
}
|
|
|
|
if (ccdc->update & OMAP3ISP_CCDC_LPF) {
|
|
ccdc_configure_lpf(ccdc);
|
|
ccdc->update &= ~OMAP3ISP_CCDC_LPF;
|
|
}
|
|
|
|
if (ccdc->update & OMAP3ISP_CCDC_BLCLAMP) {
|
|
ccdc_configure_clamp(ccdc);
|
|
ccdc->update &= ~OMAP3ISP_CCDC_BLCLAMP;
|
|
}
|
|
|
|
if (ccdc->update & OMAP3ISP_CCDC_BCOMP) {
|
|
ccdc_configure_black_comp(ccdc);
|
|
ccdc->update &= ~OMAP3ISP_CCDC_BCOMP;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* omap3isp_ccdc_restore_context - Restore values of the CCDC module registers
|
|
* @isp: Pointer to ISP device
|
|
*/
|
|
void omap3isp_ccdc_restore_context(struct isp_device *isp)
|
|
{
|
|
struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
|
|
|
|
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, ISPCCDC_CFG_VDLC);
|
|
|
|
ccdc->update = OMAP3ISP_CCDC_ALAW | OMAP3ISP_CCDC_LPF
|
|
| OMAP3ISP_CCDC_BLCLAMP | OMAP3ISP_CCDC_BCOMP;
|
|
ccdc_apply_controls(ccdc);
|
|
ccdc_configure_fpc(ccdc);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Format- and pipeline-related configuration helpers
|
|
*/
|
|
|
|
/*
|
|
* ccdc_config_vp - Configure the Video Port.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*/
|
|
static void ccdc_config_vp(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
const struct isp_format_info *info;
|
|
struct v4l2_mbus_framefmt *format;
|
|
unsigned long l3_ick = pipe->l3_ick;
|
|
unsigned int max_div = isp->revision == ISP_REVISION_15_0 ? 64 : 8;
|
|
unsigned int div = 0;
|
|
u32 fmtcfg = ISPCCDC_FMTCFG_VPEN;
|
|
|
|
format = &ccdc->formats[CCDC_PAD_SOURCE_VP];
|
|
|
|
if (!format->code) {
|
|
/* Disable the video port when the input format isn't supported.
|
|
* This is indicated by a pixel code set to 0.
|
|
*/
|
|
isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG);
|
|
return;
|
|
}
|
|
|
|
isp_reg_writel(isp, (0 << ISPCCDC_FMT_HORZ_FMTSPH_SHIFT) |
|
|
(format->width << ISPCCDC_FMT_HORZ_FMTLNH_SHIFT),
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_HORZ);
|
|
isp_reg_writel(isp, (0 << ISPCCDC_FMT_VERT_FMTSLV_SHIFT) |
|
|
((format->height + 1) << ISPCCDC_FMT_VERT_FMTLNV_SHIFT),
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_VERT);
|
|
|
|
isp_reg_writel(isp, (format->width << ISPCCDC_VP_OUT_HORZ_NUM_SHIFT) |
|
|
(format->height << ISPCCDC_VP_OUT_VERT_NUM_SHIFT),
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VP_OUT);
|
|
|
|
info = omap3isp_video_format_info(ccdc->formats[CCDC_PAD_SINK].code);
|
|
|
|
switch (info->width) {
|
|
case 8:
|
|
case 10:
|
|
fmtcfg |= ISPCCDC_FMTCFG_VPIN_9_0;
|
|
break;
|
|
case 11:
|
|
fmtcfg |= ISPCCDC_FMTCFG_VPIN_10_1;
|
|
break;
|
|
case 12:
|
|
fmtcfg |= ISPCCDC_FMTCFG_VPIN_11_2;
|
|
break;
|
|
case 13:
|
|
fmtcfg |= ISPCCDC_FMTCFG_VPIN_12_3;
|
|
break;
|
|
}
|
|
|
|
if (pipe->input)
|
|
div = DIV_ROUND_UP(l3_ick, pipe->max_rate);
|
|
else if (pipe->external_rate)
|
|
div = l3_ick / pipe->external_rate;
|
|
|
|
div = clamp(div, 2U, max_div);
|
|
fmtcfg |= (div - 2) << ISPCCDC_FMTCFG_VPIF_FRQ_SHIFT;
|
|
|
|
isp_reg_writel(isp, fmtcfg, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG);
|
|
}
|
|
|
|
/*
|
|
* ccdc_config_outlineoffset - Configure memory saving output line offset
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @bpl: Number of bytes per line when stored in memory.
|
|
* @field: Field order when storing interlaced formats in memory.
|
|
*
|
|
* Configure the offsets for the line output control:
|
|
*
|
|
* - The horizontal line offset is defined as the number of bytes between the
|
|
* start of two consecutive lines in memory. Set it to the given bytes per
|
|
* line value.
|
|
*
|
|
* - The field offset value is defined as the number of lines to offset the
|
|
* start of the field identified by FID = 1. Set it to one.
|
|
*
|
|
* - The line offset values are defined as the number of lines (as defined by
|
|
* the horizontal line offset) between the start of two consecutive lines for
|
|
* all combinations of odd/even lines in odd/even fields. When interleaving
|
|
* fields set them all to two lines, and to one line otherwise.
|
|
*/
|
|
static void ccdc_config_outlineoffset(struct isp_ccdc_device *ccdc,
|
|
unsigned int bpl,
|
|
enum v4l2_field field)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
u32 sdofst = 0;
|
|
|
|
isp_reg_writel(isp, bpl & 0xffff, OMAP3_ISP_IOMEM_CCDC,
|
|
ISPCCDC_HSIZE_OFF);
|
|
|
|
switch (field) {
|
|
case V4L2_FIELD_INTERLACED_TB:
|
|
case V4L2_FIELD_INTERLACED_BT:
|
|
/* When interleaving fields in memory offset field one by one
|
|
* line and set the line offset to two lines.
|
|
*/
|
|
sdofst |= (1 << ISPCCDC_SDOFST_LOFST0_SHIFT)
|
|
| (1 << ISPCCDC_SDOFST_LOFST1_SHIFT)
|
|
| (1 << ISPCCDC_SDOFST_LOFST2_SHIFT)
|
|
| (1 << ISPCCDC_SDOFST_LOFST3_SHIFT);
|
|
break;
|
|
|
|
default:
|
|
/* In all other cases set the line offsets to one line. */
|
|
break;
|
|
}
|
|
|
|
isp_reg_writel(isp, sdofst, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST);
|
|
}
|
|
|
|
/*
|
|
* ccdc_set_outaddr - Set memory address to save output image
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @addr: ISP MMU Mapped 32-bit memory address aligned on 32 byte boundary.
|
|
*
|
|
* Sets the memory address where the output will be saved.
|
|
*/
|
|
static void ccdc_set_outaddr(struct isp_ccdc_device *ccdc, u32 addr)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDR_ADDR);
|
|
}
|
|
|
|
/*
|
|
* omap3isp_ccdc_max_rate - Calculate maximum input data rate based on the input
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @max_rate: Maximum calculated data rate.
|
|
*
|
|
* Returns in *max_rate less value between calculated and passed
|
|
*/
|
|
void omap3isp_ccdc_max_rate(struct isp_ccdc_device *ccdc,
|
|
unsigned int *max_rate)
|
|
{
|
|
struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
|
|
unsigned int rate;
|
|
|
|
if (pipe == NULL)
|
|
return;
|
|
|
|
/*
|
|
* TRM says that for parallel sensors the maximum data rate
|
|
* should be 90% form L3/2 clock, otherwise just L3/2.
|
|
*/
|
|
if (ccdc->input == CCDC_INPUT_PARALLEL)
|
|
rate = pipe->l3_ick / 2 * 9 / 10;
|
|
else
|
|
rate = pipe->l3_ick / 2;
|
|
|
|
*max_rate = min(*max_rate, rate);
|
|
}
|
|
|
|
/*
|
|
* ccdc_config_sync_if - Set CCDC sync interface configuration
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @parcfg: Parallel interface platform data (may be NULL)
|
|
* @data_size: Data size
|
|
*/
|
|
static void ccdc_config_sync_if(struct isp_ccdc_device *ccdc,
|
|
struct isp_parallel_cfg *parcfg,
|
|
unsigned int data_size)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
const struct v4l2_mbus_framefmt *format;
|
|
u32 syn_mode = ISPCCDC_SYN_MODE_VDHDEN;
|
|
|
|
format = &ccdc->formats[CCDC_PAD_SINK];
|
|
|
|
if (format->code == MEDIA_BUS_FMT_YUYV8_2X8 ||
|
|
format->code == MEDIA_BUS_FMT_UYVY8_2X8) {
|
|
/* According to the OMAP3 TRM the input mode only affects SYNC
|
|
* mode, enabling BT.656 mode should take precedence. However,
|
|
* in practice setting the input mode to YCbCr data on 8 bits
|
|
* seems to be required in BT.656 mode. In SYNC mode set it to
|
|
* YCbCr on 16 bits as the bridge is enabled in that case.
|
|
*/
|
|
if (ccdc->bt656)
|
|
syn_mode |= ISPCCDC_SYN_MODE_INPMOD_YCBCR8;
|
|
else
|
|
syn_mode |= ISPCCDC_SYN_MODE_INPMOD_YCBCR16;
|
|
}
|
|
|
|
switch (data_size) {
|
|
case 8:
|
|
syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_8;
|
|
break;
|
|
case 10:
|
|
syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_10;
|
|
break;
|
|
case 11:
|
|
syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_11;
|
|
break;
|
|
case 12:
|
|
syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_12;
|
|
break;
|
|
}
|
|
|
|
if (parcfg && parcfg->data_pol)
|
|
syn_mode |= ISPCCDC_SYN_MODE_DATAPOL;
|
|
|
|
if (parcfg && parcfg->hs_pol)
|
|
syn_mode |= ISPCCDC_SYN_MODE_HDPOL;
|
|
|
|
/* The polarity of the vertical sync signal output by the BT.656
|
|
* decoder is not documented and seems to be active low.
|
|
*/
|
|
if ((parcfg && parcfg->vs_pol) || ccdc->bt656)
|
|
syn_mode |= ISPCCDC_SYN_MODE_VDPOL;
|
|
|
|
if (parcfg && parcfg->fld_pol)
|
|
syn_mode |= ISPCCDC_SYN_MODE_FLDPOL;
|
|
|
|
isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
|
|
|
|
/* The CCDC_CFG.Y8POS bit is used in YCbCr8 input mode only. The
|
|
* hardware seems to ignore it in all other input modes.
|
|
*/
|
|
if (format->code == MEDIA_BUS_FMT_UYVY8_2X8)
|
|
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG,
|
|
ISPCCDC_CFG_Y8POS);
|
|
else
|
|
isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG,
|
|
ISPCCDC_CFG_Y8POS);
|
|
|
|
/* Enable or disable BT.656 mode, including error correction for the
|
|
* synchronization codes.
|
|
*/
|
|
if (ccdc->bt656)
|
|
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_REC656IF,
|
|
ISPCCDC_REC656IF_R656ON | ISPCCDC_REC656IF_ECCFVH);
|
|
else
|
|
isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_REC656IF,
|
|
ISPCCDC_REC656IF_R656ON | ISPCCDC_REC656IF_ECCFVH);
|
|
|
|
}
|
|
|
|
/* CCDC formats descriptions */
|
|
static const u32 ccdc_sgrbg_pattern =
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC3_SHIFT;
|
|
|
|
static const u32 ccdc_srggb_pattern =
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC3_SHIFT;
|
|
|
|
static const u32 ccdc_sbggr_pattern =
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP0PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP0PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP0PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP0PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP1PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP1PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP2PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP2PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP2PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP2PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP3PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP3PLC3_SHIFT;
|
|
|
|
static const u32 ccdc_sgbrg_pattern =
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP0PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP0PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP0PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP0PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP1PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP1PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP2PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP2PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP2PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP2PLC3_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP3PLC0_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC1_SHIFT |
|
|
ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP3PLC2_SHIFT |
|
|
ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC3_SHIFT;
|
|
|
|
static void ccdc_configure(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
struct isp_parallel_cfg *parcfg = NULL;
|
|
struct v4l2_subdev *sensor;
|
|
struct v4l2_mbus_framefmt *format;
|
|
const struct v4l2_rect *crop;
|
|
const struct isp_format_info *fmt_info;
|
|
struct v4l2_subdev_format fmt_src;
|
|
unsigned int depth_out;
|
|
unsigned int depth_in = 0;
|
|
struct media_pad *pad;
|
|
unsigned long flags;
|
|
unsigned int bridge;
|
|
unsigned int shift;
|
|
unsigned int nph;
|
|
unsigned int sph;
|
|
u32 syn_mode;
|
|
u32 ccdc_pattern;
|
|
|
|
ccdc->bt656 = false;
|
|
ccdc->fields = 0;
|
|
|
|
pad = media_entity_remote_pad(&ccdc->pads[CCDC_PAD_SINK]);
|
|
sensor = media_entity_to_v4l2_subdev(pad->entity);
|
|
if (ccdc->input == CCDC_INPUT_PARALLEL) {
|
|
struct v4l2_subdev *sd =
|
|
to_isp_pipeline(&ccdc->subdev.entity)->external;
|
|
|
|
parcfg = &v4l2_subdev_to_bus_cfg(sd)->bus.parallel;
|
|
ccdc->bt656 = parcfg->bt656;
|
|
}
|
|
|
|
/* CCDC_PAD_SINK */
|
|
format = &ccdc->formats[CCDC_PAD_SINK];
|
|
|
|
/* Compute the lane shifter shift value and enable the bridge when the
|
|
* input format is a non-BT.656 YUV variant.
|
|
*/
|
|
fmt_src.pad = pad->index;
|
|
fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE;
|
|
if (!v4l2_subdev_call(sensor, pad, get_fmt, NULL, &fmt_src)) {
|
|
fmt_info = omap3isp_video_format_info(fmt_src.format.code);
|
|
depth_in = fmt_info->width;
|
|
}
|
|
|
|
fmt_info = omap3isp_video_format_info(format->code);
|
|
depth_out = fmt_info->width;
|
|
shift = depth_in - depth_out;
|
|
|
|
if (ccdc->bt656)
|
|
bridge = ISPCTRL_PAR_BRIDGE_DISABLE;
|
|
else if (fmt_info->code == MEDIA_BUS_FMT_YUYV8_2X8)
|
|
bridge = ISPCTRL_PAR_BRIDGE_LENDIAN;
|
|
else if (fmt_info->code == MEDIA_BUS_FMT_UYVY8_2X8)
|
|
bridge = ISPCTRL_PAR_BRIDGE_BENDIAN;
|
|
else
|
|
bridge = ISPCTRL_PAR_BRIDGE_DISABLE;
|
|
|
|
omap3isp_configure_bridge(isp, ccdc->input, parcfg, shift, bridge);
|
|
|
|
/* Configure the sync interface. */
|
|
ccdc_config_sync_if(ccdc, parcfg, depth_out);
|
|
|
|
syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
|
|
|
|
/* Use the raw, unprocessed data when writing to memory. The H3A and
|
|
* histogram modules are still fed with lens shading corrected data.
|
|
*/
|
|
syn_mode &= ~ISPCCDC_SYN_MODE_VP2SDR;
|
|
|
|
if (ccdc->output & CCDC_OUTPUT_MEMORY)
|
|
syn_mode |= ISPCCDC_SYN_MODE_WEN;
|
|
else
|
|
syn_mode &= ~ISPCCDC_SYN_MODE_WEN;
|
|
|
|
if (ccdc->output & CCDC_OUTPUT_RESIZER)
|
|
syn_mode |= ISPCCDC_SYN_MODE_SDR2RSZ;
|
|
else
|
|
syn_mode &= ~ISPCCDC_SYN_MODE_SDR2RSZ;
|
|
|
|
/* Mosaic filter */
|
|
switch (format->code) {
|
|
case MEDIA_BUS_FMT_SRGGB10_1X10:
|
|
case MEDIA_BUS_FMT_SRGGB12_1X12:
|
|
ccdc_pattern = ccdc_srggb_pattern;
|
|
break;
|
|
case MEDIA_BUS_FMT_SBGGR10_1X10:
|
|
case MEDIA_BUS_FMT_SBGGR12_1X12:
|
|
ccdc_pattern = ccdc_sbggr_pattern;
|
|
break;
|
|
case MEDIA_BUS_FMT_SGBRG10_1X10:
|
|
case MEDIA_BUS_FMT_SGBRG12_1X12:
|
|
ccdc_pattern = ccdc_sgbrg_pattern;
|
|
break;
|
|
default:
|
|
/* Use GRBG */
|
|
ccdc_pattern = ccdc_sgrbg_pattern;
|
|
break;
|
|
}
|
|
ccdc_config_imgattr(ccdc, ccdc_pattern);
|
|
|
|
/* Generate VD0 on the last line of the image and VD1 on the
|
|
* 2/3 height line.
|
|
*/
|
|
isp_reg_writel(isp, ((format->height - 2) << ISPCCDC_VDINT_0_SHIFT) |
|
|
((format->height * 2 / 3) << ISPCCDC_VDINT_1_SHIFT),
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VDINT);
|
|
|
|
/* CCDC_PAD_SOURCE_OF */
|
|
format = &ccdc->formats[CCDC_PAD_SOURCE_OF];
|
|
crop = &ccdc->crop;
|
|
|
|
/* The horizontal coordinates are expressed in pixel clock cycles. We
|
|
* need two cycles per pixel in BT.656 mode, and one cycle per pixel in
|
|
* SYNC mode regardless of the format as the bridge is enabled for YUV
|
|
* formats in that case.
|
|
*/
|
|
if (ccdc->bt656) {
|
|
sph = crop->left * 2;
|
|
nph = crop->width * 2 - 1;
|
|
} else {
|
|
sph = crop->left;
|
|
nph = crop->width - 1;
|
|
}
|
|
|
|
isp_reg_writel(isp, (sph << ISPCCDC_HORZ_INFO_SPH_SHIFT) |
|
|
(nph << ISPCCDC_HORZ_INFO_NPH_SHIFT),
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HORZ_INFO);
|
|
isp_reg_writel(isp, (crop->top << ISPCCDC_VERT_START_SLV0_SHIFT) |
|
|
(crop->top << ISPCCDC_VERT_START_SLV1_SHIFT),
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VERT_START);
|
|
isp_reg_writel(isp, (crop->height - 1)
|
|
<< ISPCCDC_VERT_LINES_NLV_SHIFT,
|
|
OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VERT_LINES);
|
|
|
|
ccdc_config_outlineoffset(ccdc, ccdc->video_out.bpl_value,
|
|
format->field);
|
|
|
|
/* When interleaving fields enable processing of the field input signal.
|
|
* This will cause the line output control module to apply the field
|
|
* offset to field 1.
|
|
*/
|
|
if (ccdc->formats[CCDC_PAD_SINK].field == V4L2_FIELD_ALTERNATE &&
|
|
(format->field == V4L2_FIELD_INTERLACED_TB ||
|
|
format->field == V4L2_FIELD_INTERLACED_BT))
|
|
syn_mode |= ISPCCDC_SYN_MODE_FLDMODE;
|
|
|
|
/* The CCDC outputs data in UYVY order by default. Swap bytes to get
|
|
* YUYV.
|
|
*/
|
|
if (format->code == MEDIA_BUS_FMT_YUYV8_1X16)
|
|
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG,
|
|
ISPCCDC_CFG_BSWD);
|
|
else
|
|
isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG,
|
|
ISPCCDC_CFG_BSWD);
|
|
|
|
/* Use PACK8 mode for 1byte per pixel formats. Check for BT.656 mode
|
|
* explicitly as the driver reports 1X16 instead of 2X8 at the OF pad
|
|
* for simplicity.
|
|
*/
|
|
if (omap3isp_video_format_info(format->code)->width <= 8 || ccdc->bt656)
|
|
syn_mode |= ISPCCDC_SYN_MODE_PACK8;
|
|
else
|
|
syn_mode &= ~ISPCCDC_SYN_MODE_PACK8;
|
|
|
|
isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
|
|
|
|
/* CCDC_PAD_SOURCE_VP */
|
|
ccdc_config_vp(ccdc);
|
|
|
|
/* Lens shading correction. */
|
|
spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
|
|
if (ccdc->lsc.request == NULL)
|
|
goto unlock;
|
|
|
|
WARN_ON(ccdc->lsc.active);
|
|
|
|
/* Get last good LSC configuration. If it is not supported for
|
|
* the current active resolution discard it.
|
|
*/
|
|
if (ccdc->lsc.active == NULL &&
|
|
__ccdc_lsc_configure(ccdc, ccdc->lsc.request) == 0) {
|
|
ccdc->lsc.active = ccdc->lsc.request;
|
|
} else {
|
|
list_add_tail(&ccdc->lsc.request->list, &ccdc->lsc.free_queue);
|
|
schedule_work(&ccdc->lsc.table_work);
|
|
}
|
|
|
|
ccdc->lsc.request = NULL;
|
|
|
|
unlock:
|
|
spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
|
|
|
|
ccdc_apply_controls(ccdc);
|
|
}
|
|
|
|
static void __ccdc_enable(struct isp_ccdc_device *ccdc, int enable)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
/* Avoid restarting the CCDC when streaming is stopping. */
|
|
if (enable && ccdc->stopping & CCDC_STOP_REQUEST)
|
|
return;
|
|
|
|
isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PCR,
|
|
ISPCCDC_PCR_EN, enable ? ISPCCDC_PCR_EN : 0);
|
|
|
|
ccdc->running = enable;
|
|
}
|
|
|
|
static int ccdc_disable(struct isp_ccdc_device *ccdc)
|
|
{
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
spin_lock_irqsave(&ccdc->lock, flags);
|
|
if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS)
|
|
ccdc->stopping = CCDC_STOP_REQUEST;
|
|
if (!ccdc->running)
|
|
ccdc->stopping = CCDC_STOP_FINISHED;
|
|
spin_unlock_irqrestore(&ccdc->lock, flags);
|
|
|
|
ret = wait_event_timeout(ccdc->wait,
|
|
ccdc->stopping == CCDC_STOP_FINISHED,
|
|
msecs_to_jiffies(2000));
|
|
if (ret == 0) {
|
|
ret = -ETIMEDOUT;
|
|
dev_warn(to_device(ccdc), "CCDC stop timeout!\n");
|
|
}
|
|
|
|
omap3isp_sbl_disable(to_isp_device(ccdc), OMAP3_ISP_SBL_CCDC_LSC_READ);
|
|
|
|
mutex_lock(&ccdc->ioctl_lock);
|
|
ccdc_lsc_free_request(ccdc, ccdc->lsc.request);
|
|
ccdc->lsc.request = ccdc->lsc.active;
|
|
ccdc->lsc.active = NULL;
|
|
cancel_work_sync(&ccdc->lsc.table_work);
|
|
ccdc_lsc_free_queue(ccdc, &ccdc->lsc.free_queue);
|
|
mutex_unlock(&ccdc->ioctl_lock);
|
|
|
|
ccdc->stopping = CCDC_STOP_NOT_REQUESTED;
|
|
|
|
return ret > 0 ? 0 : ret;
|
|
}
|
|
|
|
static void ccdc_enable(struct isp_ccdc_device *ccdc)
|
|
{
|
|
if (ccdc_lsc_is_configured(ccdc))
|
|
__ccdc_lsc_enable(ccdc, 1);
|
|
__ccdc_enable(ccdc, 1);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Interrupt handling
|
|
*/
|
|
|
|
/*
|
|
* ccdc_sbl_busy - Poll idle state of CCDC and related SBL memory write bits
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*
|
|
* Returns zero if the CCDC is idle and the image has been written to
|
|
* memory, too.
|
|
*/
|
|
static int ccdc_sbl_busy(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
|
|
return omap3isp_ccdc_busy(ccdc)
|
|
| (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_0) &
|
|
ISPSBL_CCDC_WR_0_DATA_READY)
|
|
| (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_1) &
|
|
ISPSBL_CCDC_WR_0_DATA_READY)
|
|
| (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_2) &
|
|
ISPSBL_CCDC_WR_0_DATA_READY)
|
|
| (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_3) &
|
|
ISPSBL_CCDC_WR_0_DATA_READY);
|
|
}
|
|
|
|
/*
|
|
* ccdc_sbl_wait_idle - Wait until the CCDC and related SBL are idle
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @max_wait: Max retry count in us for wait for idle/busy transition.
|
|
*/
|
|
static int ccdc_sbl_wait_idle(struct isp_ccdc_device *ccdc,
|
|
unsigned int max_wait)
|
|
{
|
|
unsigned int wait = 0;
|
|
|
|
if (max_wait == 0)
|
|
max_wait = 10000; /* 10 ms */
|
|
|
|
for (wait = 0; wait <= max_wait; wait++) {
|
|
if (!ccdc_sbl_busy(ccdc))
|
|
return 0;
|
|
|
|
rmb();
|
|
udelay(1);
|
|
}
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* ccdc_handle_stopping - Handle CCDC and/or LSC stopping sequence
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @event: Pointing which event trigger handler
|
|
*
|
|
* Return 1 when the event and stopping request combination is satisfied,
|
|
* zero otherwise.
|
|
*/
|
|
static int ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event)
|
|
{
|
|
int rval = 0;
|
|
|
|
switch ((ccdc->stopping & 3) | event) {
|
|
case CCDC_STOP_REQUEST | CCDC_EVENT_VD1:
|
|
if (ccdc->lsc.state != LSC_STATE_STOPPED)
|
|
__ccdc_lsc_enable(ccdc, 0);
|
|
__ccdc_enable(ccdc, 0);
|
|
ccdc->stopping = CCDC_STOP_EXECUTED;
|
|
return 1;
|
|
|
|
case CCDC_STOP_EXECUTED | CCDC_EVENT_VD0:
|
|
ccdc->stopping |= CCDC_STOP_CCDC_FINISHED;
|
|
if (ccdc->lsc.state == LSC_STATE_STOPPED)
|
|
ccdc->stopping |= CCDC_STOP_LSC_FINISHED;
|
|
rval = 1;
|
|
break;
|
|
|
|
case CCDC_STOP_EXECUTED | CCDC_EVENT_LSC_DONE:
|
|
ccdc->stopping |= CCDC_STOP_LSC_FINISHED;
|
|
rval = 1;
|
|
break;
|
|
|
|
case CCDC_STOP_EXECUTED | CCDC_EVENT_VD1:
|
|
return 1;
|
|
}
|
|
|
|
if (ccdc->stopping == CCDC_STOP_FINISHED) {
|
|
wake_up(&ccdc->wait);
|
|
rval = 1;
|
|
}
|
|
|
|
return rval;
|
|
}
|
|
|
|
static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
|
|
struct video_device *vdev = ccdc->subdev.devnode;
|
|
struct v4l2_event event;
|
|
|
|
/* Frame number propagation */
|
|
atomic_inc(&pipe->frame_number);
|
|
|
|
memset(&event, 0, sizeof(event));
|
|
event.type = V4L2_EVENT_FRAME_SYNC;
|
|
event.u.frame_sync.frame_sequence = atomic_read(&pipe->frame_number);
|
|
|
|
v4l2_event_queue(vdev, &event);
|
|
}
|
|
|
|
/*
|
|
* ccdc_lsc_isr - Handle LSC events
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @events: LSC events
|
|
*/
|
|
static void ccdc_lsc_isr(struct isp_ccdc_device *ccdc, u32 events)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (events & IRQ0STATUS_CCDC_LSC_PREF_ERR_IRQ) {
|
|
struct isp_pipeline *pipe =
|
|
to_isp_pipeline(&ccdc->subdev.entity);
|
|
|
|
ccdc_lsc_error_handler(ccdc);
|
|
pipe->error = true;
|
|
dev_dbg(to_device(ccdc), "lsc prefetch error\n");
|
|
}
|
|
|
|
if (!(events & IRQ0STATUS_CCDC_LSC_DONE_IRQ))
|
|
return;
|
|
|
|
/* LSC_DONE interrupt occur, there are two cases
|
|
* 1. stopping for reconfiguration
|
|
* 2. stopping because of STREAM OFF command
|
|
*/
|
|
spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
|
|
|
|
if (ccdc->lsc.state == LSC_STATE_STOPPING)
|
|
ccdc->lsc.state = LSC_STATE_STOPPED;
|
|
|
|
if (ccdc_handle_stopping(ccdc, CCDC_EVENT_LSC_DONE))
|
|
goto done;
|
|
|
|
if (ccdc->lsc.state != LSC_STATE_RECONFIG)
|
|
goto done;
|
|
|
|
/* LSC is in STOPPING state, change to the new state */
|
|
ccdc->lsc.state = LSC_STATE_STOPPED;
|
|
|
|
/* This is an exception. Start of frame and LSC_DONE interrupt
|
|
* have been received on the same time. Skip this event and wait
|
|
* for better times.
|
|
*/
|
|
if (events & IRQ0STATUS_HS_VS_IRQ)
|
|
goto done;
|
|
|
|
/* The LSC engine is stopped at this point. Enable it if there's a
|
|
* pending request.
|
|
*/
|
|
if (ccdc->lsc.request == NULL)
|
|
goto done;
|
|
|
|
ccdc_lsc_enable(ccdc);
|
|
|
|
done:
|
|
spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Check whether the CCDC has captured all fields necessary to complete the
|
|
* buffer.
|
|
*/
|
|
static bool ccdc_has_all_fields(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
enum v4l2_field of_field = ccdc->formats[CCDC_PAD_SOURCE_OF].field;
|
|
enum v4l2_field field;
|
|
|
|
/* When the input is progressive fields don't matter. */
|
|
if (of_field == V4L2_FIELD_NONE)
|
|
return true;
|
|
|
|
/* Read the current field identifier. */
|
|
field = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE)
|
|
& ISPCCDC_SYN_MODE_FLDSTAT
|
|
? V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP;
|
|
|
|
/* When capturing fields in alternate order just store the current field
|
|
* identifier in the pipeline.
|
|
*/
|
|
if (of_field == V4L2_FIELD_ALTERNATE) {
|
|
pipe->field = field;
|
|
return true;
|
|
}
|
|
|
|
/* The format is interlaced. Make sure we've captured both fields. */
|
|
ccdc->fields |= field == V4L2_FIELD_BOTTOM
|
|
? CCDC_FIELD_BOTTOM : CCDC_FIELD_TOP;
|
|
|
|
if (ccdc->fields != CCDC_FIELD_BOTH)
|
|
return false;
|
|
|
|
/* Verify that the field just captured corresponds to the last field
|
|
* needed based on the desired field order.
|
|
*/
|
|
if ((of_field == V4L2_FIELD_INTERLACED_TB && field == V4L2_FIELD_TOP) ||
|
|
(of_field == V4L2_FIELD_INTERLACED_BT && field == V4L2_FIELD_BOTTOM))
|
|
return false;
|
|
|
|
/* The buffer can be completed, reset the fields for the next buffer. */
|
|
ccdc->fields = 0;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
struct isp_buffer *buffer;
|
|
|
|
/* The CCDC generates VD0 interrupts even when disabled (the datasheet
|
|
* doesn't explicitly state if that's supposed to happen or not, so it
|
|
* can be considered as a hardware bug or as a feature, but we have to
|
|
* deal with it anyway). Disabling the CCDC when no buffer is available
|
|
* would thus not be enough, we need to handle the situation explicitly.
|
|
*/
|
|
if (list_empty(&ccdc->video_out.dmaqueue))
|
|
return 0;
|
|
|
|
/* We're in continuous mode, and memory writes were disabled due to a
|
|
* buffer underrun. Re-enable them now that we have a buffer. The buffer
|
|
* address has been set in ccdc_video_queue.
|
|
*/
|
|
if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && ccdc->underrun) {
|
|
ccdc->underrun = 0;
|
|
return 1;
|
|
}
|
|
|
|
/* Wait for the CCDC to become idle. */
|
|
if (ccdc_sbl_wait_idle(ccdc, 1000)) {
|
|
dev_info(isp->dev, "CCDC won't become idle!\n");
|
|
media_entity_enum_set(&isp->crashed, &ccdc->subdev.entity);
|
|
omap3isp_pipeline_cancel_stream(pipe);
|
|
return 0;
|
|
}
|
|
|
|
/* Don't restart CCDC if we're just about to stop streaming. */
|
|
if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS &&
|
|
ccdc->stopping & CCDC_STOP_REQUEST)
|
|
return 0;
|
|
|
|
if (!ccdc_has_all_fields(ccdc))
|
|
return 1;
|
|
|
|
buffer = omap3isp_video_buffer_next(&ccdc->video_out);
|
|
if (buffer != NULL)
|
|
ccdc_set_outaddr(ccdc, buffer->dma);
|
|
|
|
pipe->state |= ISP_PIPELINE_IDLE_OUTPUT;
|
|
|
|
if (ccdc->state == ISP_PIPELINE_STREAM_SINGLESHOT &&
|
|
isp_pipeline_ready(pipe))
|
|
omap3isp_pipeline_set_stream(pipe,
|
|
ISP_PIPELINE_STREAM_SINGLESHOT);
|
|
|
|
return buffer != NULL;
|
|
}
|
|
|
|
/*
|
|
* ccdc_vd0_isr - Handle VD0 event
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*
|
|
* Executes LSC deferred enablement before next frame starts.
|
|
*/
|
|
static void ccdc_vd0_isr(struct isp_ccdc_device *ccdc)
|
|
{
|
|
unsigned long flags;
|
|
int restart = 0;
|
|
|
|
/* In BT.656 mode the CCDC doesn't generate an HS/VS interrupt. We thus
|
|
* need to increment the frame counter here.
|
|
*/
|
|
if (ccdc->bt656) {
|
|
struct isp_pipeline *pipe =
|
|
to_isp_pipeline(&ccdc->subdev.entity);
|
|
|
|
atomic_inc(&pipe->frame_number);
|
|
}
|
|
|
|
/* Emulate a VD1 interrupt for BT.656 mode, as we can't stop the CCDC in
|
|
* the VD1 interrupt handler in that mode without risking a CCDC stall
|
|
* if a short frame is received.
|
|
*/
|
|
if (ccdc->bt656) {
|
|
spin_lock_irqsave(&ccdc->lock, flags);
|
|
if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS &&
|
|
ccdc->output & CCDC_OUTPUT_MEMORY) {
|
|
if (ccdc->lsc.state != LSC_STATE_STOPPED)
|
|
__ccdc_lsc_enable(ccdc, 0);
|
|
__ccdc_enable(ccdc, 0);
|
|
}
|
|
ccdc_handle_stopping(ccdc, CCDC_EVENT_VD1);
|
|
spin_unlock_irqrestore(&ccdc->lock, flags);
|
|
}
|
|
|
|
spin_lock_irqsave(&ccdc->lock, flags);
|
|
if (ccdc_handle_stopping(ccdc, CCDC_EVENT_VD0)) {
|
|
spin_unlock_irqrestore(&ccdc->lock, flags);
|
|
return;
|
|
}
|
|
|
|
if (ccdc->output & CCDC_OUTPUT_MEMORY)
|
|
restart = ccdc_isr_buffer(ccdc);
|
|
|
|
if (!ccdc->shadow_update)
|
|
ccdc_apply_controls(ccdc);
|
|
spin_unlock_irqrestore(&ccdc->lock, flags);
|
|
|
|
if (restart)
|
|
ccdc_enable(ccdc);
|
|
}
|
|
|
|
/*
|
|
* ccdc_vd1_isr - Handle VD1 event
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
*/
|
|
static void ccdc_vd1_isr(struct isp_ccdc_device *ccdc)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* In BT.656 mode the synchronization signals are generated by the CCDC
|
|
* from the embedded sync codes. The VD0 and VD1 interrupts are thus
|
|
* only triggered when the CCDC is enabled, unlike external sync mode
|
|
* where the line counter runs even when the CCDC is stopped. We can't
|
|
* disable the CCDC at VD1 time, as no VD0 interrupt would be generated
|
|
* for a short frame, which would result in the CCDC being stopped and
|
|
* no VD interrupt generated anymore. The CCDC is stopped from the VD0
|
|
* interrupt handler instead for BT.656.
|
|
*/
|
|
if (ccdc->bt656)
|
|
return;
|
|
|
|
spin_lock_irqsave(&ccdc->lsc.req_lock, flags);
|
|
|
|
/*
|
|
* Depending on the CCDC pipeline state, CCDC stopping should be
|
|
* handled differently. In SINGLESHOT we emulate an internal CCDC
|
|
* stopping because the CCDC hw works only in continuous mode.
|
|
* When CONTINUOUS pipeline state is used and the CCDC writes it's
|
|
* data to memory the CCDC and LSC are stopped immediately but
|
|
* without change the CCDC stopping state machine. The CCDC
|
|
* stopping state machine should be used only when user request
|
|
* for stopping is received (SINGLESHOT is an exception).
|
|
*/
|
|
switch (ccdc->state) {
|
|
case ISP_PIPELINE_STREAM_SINGLESHOT:
|
|
ccdc->stopping = CCDC_STOP_REQUEST;
|
|
break;
|
|
|
|
case ISP_PIPELINE_STREAM_CONTINUOUS:
|
|
if (ccdc->output & CCDC_OUTPUT_MEMORY) {
|
|
if (ccdc->lsc.state != LSC_STATE_STOPPED)
|
|
__ccdc_lsc_enable(ccdc, 0);
|
|
__ccdc_enable(ccdc, 0);
|
|
}
|
|
break;
|
|
|
|
case ISP_PIPELINE_STREAM_STOPPED:
|
|
break;
|
|
}
|
|
|
|
if (ccdc_handle_stopping(ccdc, CCDC_EVENT_VD1))
|
|
goto done;
|
|
|
|
if (ccdc->lsc.request == NULL)
|
|
goto done;
|
|
|
|
/*
|
|
* LSC need to be reconfigured. Stop it here and on next LSC_DONE IRQ
|
|
* do the appropriate changes in registers
|
|
*/
|
|
if (ccdc->lsc.state == LSC_STATE_RUNNING) {
|
|
__ccdc_lsc_enable(ccdc, 0);
|
|
ccdc->lsc.state = LSC_STATE_RECONFIG;
|
|
goto done;
|
|
}
|
|
|
|
/* LSC has been in STOPPED state, enable it */
|
|
if (ccdc->lsc.state == LSC_STATE_STOPPED)
|
|
ccdc_lsc_enable(ccdc);
|
|
|
|
done:
|
|
spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* omap3isp_ccdc_isr - Configure CCDC during interframe time.
|
|
* @ccdc: Pointer to ISP CCDC device.
|
|
* @events: CCDC events
|
|
*/
|
|
int omap3isp_ccdc_isr(struct isp_ccdc_device *ccdc, u32 events)
|
|
{
|
|
if (ccdc->state == ISP_PIPELINE_STREAM_STOPPED)
|
|
return 0;
|
|
|
|
if (events & IRQ0STATUS_CCDC_VD1_IRQ)
|
|
ccdc_vd1_isr(ccdc);
|
|
|
|
ccdc_lsc_isr(ccdc, events);
|
|
|
|
if (events & IRQ0STATUS_CCDC_VD0_IRQ)
|
|
ccdc_vd0_isr(ccdc);
|
|
|
|
if (events & IRQ0STATUS_HS_VS_IRQ)
|
|
ccdc_hs_vs_isr(ccdc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* ISP video operations
|
|
*/
|
|
|
|
static int ccdc_video_queue(struct isp_video *video, struct isp_buffer *buffer)
|
|
{
|
|
struct isp_ccdc_device *ccdc = &video->isp->isp_ccdc;
|
|
unsigned long flags;
|
|
bool restart = false;
|
|
|
|
if (!(ccdc->output & CCDC_OUTPUT_MEMORY))
|
|
return -ENODEV;
|
|
|
|
ccdc_set_outaddr(ccdc, buffer->dma);
|
|
|
|
/* We now have a buffer queued on the output, restart the pipeline
|
|
* on the next CCDC interrupt if running in continuous mode (or when
|
|
* starting the stream) in external sync mode, or immediately in BT.656
|
|
* sync mode as no CCDC interrupt is generated when the CCDC is stopped
|
|
* in that case.
|
|
*/
|
|
spin_lock_irqsave(&ccdc->lock, flags);
|
|
if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && !ccdc->running &&
|
|
ccdc->bt656)
|
|
restart = true;
|
|
else
|
|
ccdc->underrun = 1;
|
|
spin_unlock_irqrestore(&ccdc->lock, flags);
|
|
|
|
if (restart)
|
|
ccdc_enable(ccdc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct isp_video_operations ccdc_video_ops = {
|
|
.queue = ccdc_video_queue,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* V4L2 subdev operations
|
|
*/
|
|
|
|
/*
|
|
* ccdc_ioctl - CCDC module private ioctl's
|
|
* @sd: ISP CCDC V4L2 subdevice
|
|
* @cmd: ioctl command
|
|
* @arg: ioctl argument
|
|
*
|
|
* Return 0 on success or a negative error code otherwise.
|
|
*/
|
|
static long ccdc_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
|
|
{
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
int ret;
|
|
|
|
switch (cmd) {
|
|
case VIDIOC_OMAP3ISP_CCDC_CFG:
|
|
mutex_lock(&ccdc->ioctl_lock);
|
|
ret = ccdc_config(ccdc, arg);
|
|
mutex_unlock(&ccdc->ioctl_lock);
|
|
break;
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
|
|
struct v4l2_event_subscription *sub)
|
|
{
|
|
if (sub->type != V4L2_EVENT_FRAME_SYNC)
|
|
return -EINVAL;
|
|
|
|
/* line number is zero at frame start */
|
|
if (sub->id != 0)
|
|
return -EINVAL;
|
|
|
|
return v4l2_event_subscribe(fh, sub, OMAP3ISP_CCDC_NEVENTS, NULL);
|
|
}
|
|
|
|
static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
|
|
struct v4l2_event_subscription *sub)
|
|
{
|
|
return v4l2_event_unsubscribe(fh, sub);
|
|
}
|
|
|
|
/*
|
|
* ccdc_set_stream - Enable/Disable streaming on the CCDC module
|
|
* @sd: ISP CCDC V4L2 subdevice
|
|
* @enable: Enable/disable stream
|
|
*
|
|
* When writing to memory, the CCDC hardware can't be enabled without a memory
|
|
* buffer to write to. As the s_stream operation is called in response to a
|
|
* STREAMON call without any buffer queued yet, just update the enabled field
|
|
* and return immediately. The CCDC will be enabled in ccdc_isr_buffer().
|
|
*
|
|
* When not writing to memory enable the CCDC immediately.
|
|
*/
|
|
static int ccdc_set_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
int ret = 0;
|
|
|
|
if (ccdc->state == ISP_PIPELINE_STREAM_STOPPED) {
|
|
if (enable == ISP_PIPELINE_STREAM_STOPPED)
|
|
return 0;
|
|
|
|
omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_CCDC);
|
|
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG,
|
|
ISPCCDC_CFG_VDLC);
|
|
|
|
ccdc_configure(ccdc);
|
|
|
|
ccdc_print_status(ccdc);
|
|
}
|
|
|
|
switch (enable) {
|
|
case ISP_PIPELINE_STREAM_CONTINUOUS:
|
|
if (ccdc->output & CCDC_OUTPUT_MEMORY)
|
|
omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CCDC_WRITE);
|
|
|
|
if (ccdc->underrun || !(ccdc->output & CCDC_OUTPUT_MEMORY))
|
|
ccdc_enable(ccdc);
|
|
|
|
ccdc->underrun = 0;
|
|
break;
|
|
|
|
case ISP_PIPELINE_STREAM_SINGLESHOT:
|
|
if (ccdc->output & CCDC_OUTPUT_MEMORY &&
|
|
ccdc->state != ISP_PIPELINE_STREAM_SINGLESHOT)
|
|
omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CCDC_WRITE);
|
|
|
|
ccdc_enable(ccdc);
|
|
break;
|
|
|
|
case ISP_PIPELINE_STREAM_STOPPED:
|
|
ret = ccdc_disable(ccdc);
|
|
if (ccdc->output & CCDC_OUTPUT_MEMORY)
|
|
omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CCDC_WRITE);
|
|
omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_CCDC);
|
|
ccdc->underrun = 0;
|
|
break;
|
|
}
|
|
|
|
ccdc->state = enable;
|
|
return ret;
|
|
}
|
|
|
|
static struct v4l2_mbus_framefmt *
|
|
__ccdc_get_format(struct isp_ccdc_device *ccdc,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad, enum v4l2_subdev_format_whence which)
|
|
{
|
|
if (which == V4L2_SUBDEV_FORMAT_TRY)
|
|
return v4l2_subdev_get_try_format(&ccdc->subdev, sd_state,
|
|
pad);
|
|
else
|
|
return &ccdc->formats[pad];
|
|
}
|
|
|
|
static struct v4l2_rect *
|
|
__ccdc_get_crop(struct isp_ccdc_device *ccdc,
|
|
struct v4l2_subdev_state *sd_state,
|
|
enum v4l2_subdev_format_whence which)
|
|
{
|
|
if (which == V4L2_SUBDEV_FORMAT_TRY)
|
|
return v4l2_subdev_get_try_crop(&ccdc->subdev, sd_state,
|
|
CCDC_PAD_SOURCE_OF);
|
|
else
|
|
return &ccdc->crop;
|
|
}
|
|
|
|
/*
|
|
* ccdc_try_format - Try video format on a pad
|
|
* @ccdc: ISP CCDC device
|
|
* @cfg : V4L2 subdev pad configuration
|
|
* @pad: Pad number
|
|
* @fmt: Format
|
|
*/
|
|
static void
|
|
ccdc_try_format(struct isp_ccdc_device *ccdc,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad, struct v4l2_mbus_framefmt *fmt,
|
|
enum v4l2_subdev_format_whence which)
|
|
{
|
|
const struct isp_format_info *info;
|
|
u32 pixelcode;
|
|
unsigned int width = fmt->width;
|
|
unsigned int height = fmt->height;
|
|
struct v4l2_rect *crop;
|
|
enum v4l2_field field;
|
|
unsigned int i;
|
|
|
|
switch (pad) {
|
|
case CCDC_PAD_SINK:
|
|
for (i = 0; i < ARRAY_SIZE(ccdc_fmts); i++) {
|
|
if (fmt->code == ccdc_fmts[i])
|
|
break;
|
|
}
|
|
|
|
/* If not found, use SGRBG10 as default */
|
|
if (i >= ARRAY_SIZE(ccdc_fmts))
|
|
fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
|
|
/* Clamp the input size. */
|
|
fmt->width = clamp_t(u32, width, 32, 4096);
|
|
fmt->height = clamp_t(u32, height, 32, 4096);
|
|
|
|
/* Default to progressive field order. */
|
|
if (fmt->field == V4L2_FIELD_ANY)
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
|
|
break;
|
|
|
|
case CCDC_PAD_SOURCE_OF:
|
|
pixelcode = fmt->code;
|
|
field = fmt->field;
|
|
*fmt = *__ccdc_get_format(ccdc, sd_state, CCDC_PAD_SINK,
|
|
which);
|
|
|
|
/* In SYNC mode the bridge converts YUV formats from 2X8 to
|
|
* 1X16. In BT.656 no such conversion occurs. As we don't know
|
|
* at this point whether the source will use SYNC or BT.656 mode
|
|
* let's pretend the conversion always occurs. The CCDC will be
|
|
* configured to pack bytes in BT.656, hiding the inaccuracy.
|
|
* In all cases bytes can be swapped.
|
|
*/
|
|
if (fmt->code == MEDIA_BUS_FMT_YUYV8_2X8 ||
|
|
fmt->code == MEDIA_BUS_FMT_UYVY8_2X8) {
|
|
/* Use the user requested format if YUV. */
|
|
if (pixelcode == MEDIA_BUS_FMT_YUYV8_2X8 ||
|
|
pixelcode == MEDIA_BUS_FMT_UYVY8_2X8 ||
|
|
pixelcode == MEDIA_BUS_FMT_YUYV8_1X16 ||
|
|
pixelcode == MEDIA_BUS_FMT_UYVY8_1X16)
|
|
fmt->code = pixelcode;
|
|
|
|
if (fmt->code == MEDIA_BUS_FMT_YUYV8_2X8)
|
|
fmt->code = MEDIA_BUS_FMT_YUYV8_1X16;
|
|
else if (fmt->code == MEDIA_BUS_FMT_UYVY8_2X8)
|
|
fmt->code = MEDIA_BUS_FMT_UYVY8_1X16;
|
|
}
|
|
|
|
/* Hardcode the output size to the crop rectangle size. */
|
|
crop = __ccdc_get_crop(ccdc, sd_state, which);
|
|
fmt->width = crop->width;
|
|
fmt->height = crop->height;
|
|
|
|
/* When input format is interlaced with alternating fields the
|
|
* CCDC can interleave the fields.
|
|
*/
|
|
if (fmt->field == V4L2_FIELD_ALTERNATE &&
|
|
(field == V4L2_FIELD_INTERLACED_TB ||
|
|
field == V4L2_FIELD_INTERLACED_BT)) {
|
|
fmt->field = field;
|
|
fmt->height *= 2;
|
|
}
|
|
|
|
break;
|
|
|
|
case CCDC_PAD_SOURCE_VP:
|
|
*fmt = *__ccdc_get_format(ccdc, sd_state, CCDC_PAD_SINK,
|
|
which);
|
|
|
|
/* The video port interface truncates the data to 10 bits. */
|
|
info = omap3isp_video_format_info(fmt->code);
|
|
fmt->code = info->truncated;
|
|
|
|
/* YUV formats are not supported by the video port. */
|
|
if (fmt->code == MEDIA_BUS_FMT_YUYV8_2X8 ||
|
|
fmt->code == MEDIA_BUS_FMT_UYVY8_2X8)
|
|
fmt->code = 0;
|
|
|
|
/* The number of lines that can be clocked out from the video
|
|
* port output must be at least one line less than the number
|
|
* of input lines.
|
|
*/
|
|
fmt->width = clamp_t(u32, width, 32, fmt->width);
|
|
fmt->height = clamp_t(u32, height, 32, fmt->height - 1);
|
|
break;
|
|
}
|
|
|
|
/* Data is written to memory unpacked, each 10-bit or 12-bit pixel is
|
|
* stored on 2 bytes.
|
|
*/
|
|
fmt->colorspace = V4L2_COLORSPACE_SRGB;
|
|
}
|
|
|
|
/*
|
|
* ccdc_try_crop - Validate a crop rectangle
|
|
* @ccdc: ISP CCDC device
|
|
* @sink: format on the sink pad
|
|
* @crop: crop rectangle to be validated
|
|
*/
|
|
static void ccdc_try_crop(struct isp_ccdc_device *ccdc,
|
|
const struct v4l2_mbus_framefmt *sink,
|
|
struct v4l2_rect *crop)
|
|
{
|
|
const struct isp_format_info *info;
|
|
unsigned int max_width;
|
|
|
|
/* For Bayer formats, restrict left/top and width/height to even values
|
|
* to keep the Bayer pattern.
|
|
*/
|
|
info = omap3isp_video_format_info(sink->code);
|
|
if (info->flavor != MEDIA_BUS_FMT_Y8_1X8) {
|
|
crop->left &= ~1;
|
|
crop->top &= ~1;
|
|
}
|
|
|
|
crop->left = clamp_t(u32, crop->left, 0, sink->width - CCDC_MIN_WIDTH);
|
|
crop->top = clamp_t(u32, crop->top, 0, sink->height - CCDC_MIN_HEIGHT);
|
|
|
|
/* The data formatter truncates the number of horizontal output pixels
|
|
* to a multiple of 16. To avoid clipping data, allow callers to request
|
|
* an output size bigger than the input size up to the nearest multiple
|
|
* of 16.
|
|
*/
|
|
max_width = (sink->width - crop->left + 15) & ~15;
|
|
crop->width = clamp_t(u32, crop->width, CCDC_MIN_WIDTH, max_width)
|
|
& ~15;
|
|
crop->height = clamp_t(u32, crop->height, CCDC_MIN_HEIGHT,
|
|
sink->height - crop->top);
|
|
|
|
/* Odd width/height values don't make sense for Bayer formats. */
|
|
if (info->flavor != MEDIA_BUS_FMT_Y8_1X8) {
|
|
crop->width &= ~1;
|
|
crop->height &= ~1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ccdc_enum_mbus_code - Handle pixel format enumeration
|
|
* @sd : pointer to v4l2 subdev structure
|
|
* @cfg : V4L2 subdev pad configuration
|
|
* @code : pointer to v4l2_subdev_mbus_code_enum structure
|
|
* return -EINVAL or zero on success
|
|
*/
|
|
static int ccdc_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
struct v4l2_mbus_framefmt *format;
|
|
|
|
switch (code->pad) {
|
|
case CCDC_PAD_SINK:
|
|
if (code->index >= ARRAY_SIZE(ccdc_fmts))
|
|
return -EINVAL;
|
|
|
|
code->code = ccdc_fmts[code->index];
|
|
break;
|
|
|
|
case CCDC_PAD_SOURCE_OF:
|
|
format = __ccdc_get_format(ccdc, sd_state, code->pad,
|
|
code->which);
|
|
|
|
if (format->code == MEDIA_BUS_FMT_YUYV8_2X8 ||
|
|
format->code == MEDIA_BUS_FMT_UYVY8_2X8) {
|
|
/* In YUV mode the CCDC can swap bytes. */
|
|
if (code->index == 0)
|
|
code->code = MEDIA_BUS_FMT_YUYV8_1X16;
|
|
else if (code->index == 1)
|
|
code->code = MEDIA_BUS_FMT_UYVY8_1X16;
|
|
else
|
|
return -EINVAL;
|
|
} else {
|
|
/* In raw mode, no configurable format confversion is
|
|
* available.
|
|
*/
|
|
if (code->index == 0)
|
|
code->code = format->code;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case CCDC_PAD_SOURCE_VP:
|
|
/* The CCDC supports no configurable format conversion
|
|
* compatible with the video port. Enumerate a single output
|
|
* format code.
|
|
*/
|
|
if (code->index != 0)
|
|
return -EINVAL;
|
|
|
|
format = __ccdc_get_format(ccdc, sd_state, code->pad,
|
|
code->which);
|
|
|
|
/* A pixel code equal to 0 means that the video port doesn't
|
|
* support the input format. Don't enumerate any pixel code.
|
|
*/
|
|
if (format->code == 0)
|
|
return -EINVAL;
|
|
|
|
code->code = format->code;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ccdc_enum_frame_size(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
struct v4l2_mbus_framefmt format;
|
|
|
|
if (fse->index != 0)
|
|
return -EINVAL;
|
|
|
|
format.code = fse->code;
|
|
format.width = 1;
|
|
format.height = 1;
|
|
ccdc_try_format(ccdc, sd_state, fse->pad, &format, fse->which);
|
|
fse->min_width = format.width;
|
|
fse->min_height = format.height;
|
|
|
|
if (format.code != fse->code)
|
|
return -EINVAL;
|
|
|
|
format.code = fse->code;
|
|
format.width = -1;
|
|
format.height = -1;
|
|
ccdc_try_format(ccdc, sd_state, fse->pad, &format, fse->which);
|
|
fse->max_width = format.width;
|
|
fse->max_height = format.height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ccdc_get_selection - Retrieve a selection rectangle on a pad
|
|
* @sd: ISP CCDC V4L2 subdevice
|
|
* @cfg: V4L2 subdev pad configuration
|
|
* @sel: Selection rectangle
|
|
*
|
|
* The only supported rectangles are the crop rectangles on the output formatter
|
|
* source pad.
|
|
*
|
|
* Return 0 on success or a negative error code otherwise.
|
|
*/
|
|
static int ccdc_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
struct v4l2_mbus_framefmt *format;
|
|
|
|
if (sel->pad != CCDC_PAD_SOURCE_OF)
|
|
return -EINVAL;
|
|
|
|
switch (sel->target) {
|
|
case V4L2_SEL_TGT_CROP_BOUNDS:
|
|
sel->r.left = 0;
|
|
sel->r.top = 0;
|
|
sel->r.width = INT_MAX;
|
|
sel->r.height = INT_MAX;
|
|
|
|
format = __ccdc_get_format(ccdc, sd_state, CCDC_PAD_SINK,
|
|
sel->which);
|
|
ccdc_try_crop(ccdc, format, &sel->r);
|
|
break;
|
|
|
|
case V4L2_SEL_TGT_CROP:
|
|
sel->r = *__ccdc_get_crop(ccdc, sd_state, sel->which);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ccdc_set_selection - Set a selection rectangle on a pad
|
|
* @sd: ISP CCDC V4L2 subdevice
|
|
* @cfg: V4L2 subdev pad configuration
|
|
* @sel: Selection rectangle
|
|
*
|
|
* The only supported rectangle is the actual crop rectangle on the output
|
|
* formatter source pad.
|
|
*
|
|
* Return 0 on success or a negative error code otherwise.
|
|
*/
|
|
static int ccdc_set_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
struct v4l2_mbus_framefmt *format;
|
|
|
|
if (sel->target != V4L2_SEL_TGT_CROP ||
|
|
sel->pad != CCDC_PAD_SOURCE_OF)
|
|
return -EINVAL;
|
|
|
|
/* The crop rectangle can't be changed while streaming. */
|
|
if (ccdc->state != ISP_PIPELINE_STREAM_STOPPED)
|
|
return -EBUSY;
|
|
|
|
/* Modifying the crop rectangle always changes the format on the source
|
|
* pad. If the KEEP_CONFIG flag is set, just return the current crop
|
|
* rectangle.
|
|
*/
|
|
if (sel->flags & V4L2_SEL_FLAG_KEEP_CONFIG) {
|
|
sel->r = *__ccdc_get_crop(ccdc, sd_state, sel->which);
|
|
return 0;
|
|
}
|
|
|
|
format = __ccdc_get_format(ccdc, sd_state, CCDC_PAD_SINK, sel->which);
|
|
ccdc_try_crop(ccdc, format, &sel->r);
|
|
*__ccdc_get_crop(ccdc, sd_state, sel->which) = sel->r;
|
|
|
|
/* Update the source format. */
|
|
format = __ccdc_get_format(ccdc, sd_state, CCDC_PAD_SOURCE_OF,
|
|
sel->which);
|
|
ccdc_try_format(ccdc, sd_state, CCDC_PAD_SOURCE_OF, format,
|
|
sel->which);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ccdc_get_format - Retrieve the video format on a pad
|
|
* @sd : ISP CCDC V4L2 subdevice
|
|
* @cfg: V4L2 subdev pad configuration
|
|
* @fmt: Format
|
|
*
|
|
* Return 0 on success or -EINVAL if the pad is invalid or doesn't correspond
|
|
* to the format type.
|
|
*/
|
|
static int ccdc_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
struct v4l2_mbus_framefmt *format;
|
|
|
|
format = __ccdc_get_format(ccdc, sd_state, fmt->pad, fmt->which);
|
|
if (format == NULL)
|
|
return -EINVAL;
|
|
|
|
fmt->format = *format;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ccdc_set_format - Set the video format on a pad
|
|
* @sd : ISP CCDC V4L2 subdevice
|
|
* @cfg: V4L2 subdev pad configuration
|
|
* @fmt: Format
|
|
*
|
|
* Return 0 on success or -EINVAL if the pad is invalid or doesn't correspond
|
|
* to the format type.
|
|
*/
|
|
static int ccdc_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
struct v4l2_mbus_framefmt *format;
|
|
struct v4l2_rect *crop;
|
|
|
|
format = __ccdc_get_format(ccdc, sd_state, fmt->pad, fmt->which);
|
|
if (format == NULL)
|
|
return -EINVAL;
|
|
|
|
ccdc_try_format(ccdc, sd_state, fmt->pad, &fmt->format, fmt->which);
|
|
*format = fmt->format;
|
|
|
|
/* Propagate the format from sink to source */
|
|
if (fmt->pad == CCDC_PAD_SINK) {
|
|
/* Reset the crop rectangle. */
|
|
crop = __ccdc_get_crop(ccdc, sd_state, fmt->which);
|
|
crop->left = 0;
|
|
crop->top = 0;
|
|
crop->width = fmt->format.width;
|
|
crop->height = fmt->format.height;
|
|
|
|
ccdc_try_crop(ccdc, &fmt->format, crop);
|
|
|
|
/* Update the source formats. */
|
|
format = __ccdc_get_format(ccdc, sd_state, CCDC_PAD_SOURCE_OF,
|
|
fmt->which);
|
|
*format = fmt->format;
|
|
ccdc_try_format(ccdc, sd_state, CCDC_PAD_SOURCE_OF, format,
|
|
fmt->which);
|
|
|
|
format = __ccdc_get_format(ccdc, sd_state, CCDC_PAD_SOURCE_VP,
|
|
fmt->which);
|
|
*format = fmt->format;
|
|
ccdc_try_format(ccdc, sd_state, CCDC_PAD_SOURCE_VP, format,
|
|
fmt->which);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Decide whether desired output pixel code can be obtained with
|
|
* the lane shifter by shifting the input pixel code.
|
|
* @in: input pixelcode to shifter
|
|
* @out: output pixelcode from shifter
|
|
* @additional_shift: # of bits the sensor's LSB is offset from CAMEXT[0]
|
|
*
|
|
* return true if the combination is possible
|
|
* return false otherwise
|
|
*/
|
|
static bool ccdc_is_shiftable(u32 in, u32 out, unsigned int additional_shift)
|
|
{
|
|
const struct isp_format_info *in_info, *out_info;
|
|
|
|
if (in == out)
|
|
return true;
|
|
|
|
in_info = omap3isp_video_format_info(in);
|
|
out_info = omap3isp_video_format_info(out);
|
|
|
|
if ((in_info->flavor == 0) || (out_info->flavor == 0))
|
|
return false;
|
|
|
|
if (in_info->flavor != out_info->flavor)
|
|
return false;
|
|
|
|
return in_info->width - out_info->width + additional_shift <= 6;
|
|
}
|
|
|
|
static int ccdc_link_validate(struct v4l2_subdev *sd,
|
|
struct media_link *link,
|
|
struct v4l2_subdev_format *source_fmt,
|
|
struct v4l2_subdev_format *sink_fmt)
|
|
{
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
unsigned long parallel_shift;
|
|
|
|
/* Check if the two ends match */
|
|
if (source_fmt->format.width != sink_fmt->format.width ||
|
|
source_fmt->format.height != sink_fmt->format.height)
|
|
return -EPIPE;
|
|
|
|
/* We've got a parallel sensor here. */
|
|
if (ccdc->input == CCDC_INPUT_PARALLEL) {
|
|
struct v4l2_subdev *sd =
|
|
media_entity_to_v4l2_subdev(link->source->entity);
|
|
struct isp_bus_cfg *bus_cfg = v4l2_subdev_to_bus_cfg(sd);
|
|
|
|
parallel_shift = bus_cfg->bus.parallel.data_lane_shift;
|
|
} else {
|
|
parallel_shift = 0;
|
|
}
|
|
|
|
/* Lane shifter may be used to drop bits on CCDC sink pad */
|
|
if (!ccdc_is_shiftable(source_fmt->format.code,
|
|
sink_fmt->format.code, parallel_shift))
|
|
return -EPIPE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ccdc_init_formats - Initialize formats on all pads
|
|
* @sd: ISP CCDC V4L2 subdevice
|
|
* @fh: V4L2 subdev file handle
|
|
*
|
|
* Initialize all pad formats with default values. If fh is not NULL, try
|
|
* formats are initialized on the file handle. Otherwise active formats are
|
|
* initialized on the device.
|
|
*/
|
|
static int ccdc_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct v4l2_subdev_format format;
|
|
|
|
memset(&format, 0, sizeof(format));
|
|
format.pad = CCDC_PAD_SINK;
|
|
format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
|
|
format.format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
format.format.width = 4096;
|
|
format.format.height = 4096;
|
|
ccdc_set_format(sd, fh ? fh->state : NULL, &format);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* V4L2 subdev core operations */
|
|
static const struct v4l2_subdev_core_ops ccdc_v4l2_core_ops = {
|
|
.ioctl = ccdc_ioctl,
|
|
.subscribe_event = ccdc_subscribe_event,
|
|
.unsubscribe_event = ccdc_unsubscribe_event,
|
|
};
|
|
|
|
/* V4L2 subdev video operations */
|
|
static const struct v4l2_subdev_video_ops ccdc_v4l2_video_ops = {
|
|
.s_stream = ccdc_set_stream,
|
|
};
|
|
|
|
/* V4L2 subdev pad operations */
|
|
static const struct v4l2_subdev_pad_ops ccdc_v4l2_pad_ops = {
|
|
.enum_mbus_code = ccdc_enum_mbus_code,
|
|
.enum_frame_size = ccdc_enum_frame_size,
|
|
.get_fmt = ccdc_get_format,
|
|
.set_fmt = ccdc_set_format,
|
|
.get_selection = ccdc_get_selection,
|
|
.set_selection = ccdc_set_selection,
|
|
.link_validate = ccdc_link_validate,
|
|
};
|
|
|
|
/* V4L2 subdev operations */
|
|
static const struct v4l2_subdev_ops ccdc_v4l2_ops = {
|
|
.core = &ccdc_v4l2_core_ops,
|
|
.video = &ccdc_v4l2_video_ops,
|
|
.pad = &ccdc_v4l2_pad_ops,
|
|
};
|
|
|
|
/* V4L2 subdev internal operations */
|
|
static const struct v4l2_subdev_internal_ops ccdc_v4l2_internal_ops = {
|
|
.open = ccdc_init_formats,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Media entity operations
|
|
*/
|
|
|
|
/*
|
|
* ccdc_link_setup - Setup CCDC connections
|
|
* @entity: CCDC media entity
|
|
* @local: Pad at the local end of the link
|
|
* @remote: Pad at the remote end of the link
|
|
* @flags: Link flags
|
|
*
|
|
* return -EINVAL or zero on success
|
|
*/
|
|
static int ccdc_link_setup(struct media_entity *entity,
|
|
const struct media_pad *local,
|
|
const struct media_pad *remote, u32 flags)
|
|
{
|
|
struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
|
|
struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd);
|
|
struct isp_device *isp = to_isp_device(ccdc);
|
|
unsigned int index = local->index;
|
|
|
|
/* FIXME: this is actually a hack! */
|
|
if (is_media_entity_v4l2_subdev(remote->entity))
|
|
index |= 2 << 16;
|
|
|
|
switch (index) {
|
|
case CCDC_PAD_SINK | 2 << 16:
|
|
/* Read from the sensor (parallel interface), CCP2, CSI2a or
|
|
* CSI2c.
|
|
*/
|
|
if (!(flags & MEDIA_LNK_FL_ENABLED)) {
|
|
ccdc->input = CCDC_INPUT_NONE;
|
|
break;
|
|
}
|
|
|
|
if (ccdc->input != CCDC_INPUT_NONE)
|
|
return -EBUSY;
|
|
|
|
if (remote->entity == &isp->isp_ccp2.subdev.entity)
|
|
ccdc->input = CCDC_INPUT_CCP2B;
|
|
else if (remote->entity == &isp->isp_csi2a.subdev.entity)
|
|
ccdc->input = CCDC_INPUT_CSI2A;
|
|
else if (remote->entity == &isp->isp_csi2c.subdev.entity)
|
|
ccdc->input = CCDC_INPUT_CSI2C;
|
|
else
|
|
ccdc->input = CCDC_INPUT_PARALLEL;
|
|
|
|
break;
|
|
|
|
/*
|
|
* The ISP core doesn't support pipelines with multiple video outputs.
|
|
* Revisit this when it will be implemented, and return -EBUSY for now.
|
|
*/
|
|
|
|
case CCDC_PAD_SOURCE_VP | 2 << 16:
|
|
/* Write to preview engine, histogram and H3A. When none of
|
|
* those links are active, the video port can be disabled.
|
|
*/
|
|
if (flags & MEDIA_LNK_FL_ENABLED) {
|
|
if (ccdc->output & ~CCDC_OUTPUT_PREVIEW)
|
|
return -EBUSY;
|
|
ccdc->output |= CCDC_OUTPUT_PREVIEW;
|
|
} else {
|
|
ccdc->output &= ~CCDC_OUTPUT_PREVIEW;
|
|
}
|
|
break;
|
|
|
|
case CCDC_PAD_SOURCE_OF:
|
|
/* Write to memory */
|
|
if (flags & MEDIA_LNK_FL_ENABLED) {
|
|
if (ccdc->output & ~CCDC_OUTPUT_MEMORY)
|
|
return -EBUSY;
|
|
ccdc->output |= CCDC_OUTPUT_MEMORY;
|
|
} else {
|
|
ccdc->output &= ~CCDC_OUTPUT_MEMORY;
|
|
}
|
|
break;
|
|
|
|
case CCDC_PAD_SOURCE_OF | 2 << 16:
|
|
/* Write to resizer */
|
|
if (flags & MEDIA_LNK_FL_ENABLED) {
|
|
if (ccdc->output & ~CCDC_OUTPUT_RESIZER)
|
|
return -EBUSY;
|
|
ccdc->output |= CCDC_OUTPUT_RESIZER;
|
|
} else {
|
|
ccdc->output &= ~CCDC_OUTPUT_RESIZER;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* media operations */
|
|
static const struct media_entity_operations ccdc_media_ops = {
|
|
.link_setup = ccdc_link_setup,
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
};
|
|
|
|
void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc)
|
|
{
|
|
v4l2_device_unregister_subdev(&ccdc->subdev);
|
|
omap3isp_video_unregister(&ccdc->video_out);
|
|
}
|
|
|
|
int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc,
|
|
struct v4l2_device *vdev)
|
|
{
|
|
int ret;
|
|
|
|
/* Register the subdev and video node. */
|
|
ccdc->subdev.dev = vdev->mdev->dev;
|
|
ret = v4l2_device_register_subdev(vdev, &ccdc->subdev);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = omap3isp_video_register(&ccdc->video_out, vdev);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
omap3isp_ccdc_unregister_entities(ccdc);
|
|
return ret;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* ISP CCDC initialisation and cleanup
|
|
*/
|
|
|
|
/*
|
|
* ccdc_init_entities - Initialize V4L2 subdev and media entity
|
|
* @ccdc: ISP CCDC module
|
|
*
|
|
* Return 0 on success and a negative error code on failure.
|
|
*/
|
|
static int ccdc_init_entities(struct isp_ccdc_device *ccdc)
|
|
{
|
|
struct v4l2_subdev *sd = &ccdc->subdev;
|
|
struct media_pad *pads = ccdc->pads;
|
|
struct media_entity *me = &sd->entity;
|
|
int ret;
|
|
|
|
ccdc->input = CCDC_INPUT_NONE;
|
|
|
|
v4l2_subdev_init(sd, &ccdc_v4l2_ops);
|
|
sd->internal_ops = &ccdc_v4l2_internal_ops;
|
|
strscpy(sd->name, "OMAP3 ISP CCDC", sizeof(sd->name));
|
|
sd->grp_id = 1 << 16; /* group ID for isp subdevs */
|
|
v4l2_set_subdevdata(sd, ccdc);
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
|
|
pads[CCDC_PAD_SINK].flags = MEDIA_PAD_FL_SINK
|
|
| MEDIA_PAD_FL_MUST_CONNECT;
|
|
pads[CCDC_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_SOURCE;
|
|
pads[CCDC_PAD_SOURCE_OF].flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
me->ops = &ccdc_media_ops;
|
|
ret = media_entity_pads_init(me, CCDC_PADS_NUM, pads);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ccdc_init_formats(sd, NULL);
|
|
|
|
ccdc->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
ccdc->video_out.ops = &ccdc_video_ops;
|
|
ccdc->video_out.isp = to_isp_device(ccdc);
|
|
ccdc->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
|
|
ccdc->video_out.bpl_alignment = 32;
|
|
|
|
ret = omap3isp_video_init(&ccdc->video_out, "CCDC");
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
media_entity_cleanup(me);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* omap3isp_ccdc_init - CCDC module initialization.
|
|
* @isp: Device pointer specific to the OMAP3 ISP.
|
|
*
|
|
* TODO: Get the initialisation values from platform data.
|
|
*
|
|
* Return 0 on success or a negative error code otherwise.
|
|
*/
|
|
int omap3isp_ccdc_init(struct isp_device *isp)
|
|
{
|
|
struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
|
|
int ret;
|
|
|
|
spin_lock_init(&ccdc->lock);
|
|
init_waitqueue_head(&ccdc->wait);
|
|
mutex_init(&ccdc->ioctl_lock);
|
|
|
|
ccdc->stopping = CCDC_STOP_NOT_REQUESTED;
|
|
|
|
INIT_WORK(&ccdc->lsc.table_work, ccdc_lsc_free_table_work);
|
|
ccdc->lsc.state = LSC_STATE_STOPPED;
|
|
INIT_LIST_HEAD(&ccdc->lsc.free_queue);
|
|
spin_lock_init(&ccdc->lsc.req_lock);
|
|
|
|
ccdc->clamp.oblen = 0;
|
|
ccdc->clamp.dcsubval = 0;
|
|
|
|
ccdc->update = OMAP3ISP_CCDC_BLCLAMP;
|
|
ccdc_apply_controls(ccdc);
|
|
|
|
ret = ccdc_init_entities(ccdc);
|
|
if (ret < 0) {
|
|
mutex_destroy(&ccdc->ioctl_lock);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* omap3isp_ccdc_cleanup - CCDC module cleanup.
|
|
* @isp: Device pointer specific to the OMAP3 ISP.
|
|
*/
|
|
void omap3isp_ccdc_cleanup(struct isp_device *isp)
|
|
{
|
|
struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
|
|
|
|
omap3isp_video_cleanup(&ccdc->video_out);
|
|
media_entity_cleanup(&ccdc->subdev.entity);
|
|
|
|
/* Free LSC requests. As the CCDC is stopped there's no active request,
|
|
* so only the pending request and the free queue need to be handled.
|
|
*/
|
|
ccdc_lsc_free_request(ccdc, ccdc->lsc.request);
|
|
cancel_work_sync(&ccdc->lsc.table_work);
|
|
ccdc_lsc_free_queue(ccdc, &ccdc->lsc.free_queue);
|
|
|
|
if (ccdc->fpc.addr != NULL)
|
|
dma_free_coherent(isp->dev, ccdc->fpc.fpnum * 4, ccdc->fpc.addr,
|
|
ccdc->fpc.dma);
|
|
|
|
mutex_destroy(&ccdc->ioctl_lock);
|
|
}
|