368 lines
9.1 KiB
C
368 lines
9.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2010-2011, 2020-2021, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2014, Sony Mobile Communications Inc.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define PON_REV2 0x01
|
|
|
|
#define PON_RT_STS 0x10
|
|
#define PON_KPDPWR_N_SET BIT(0)
|
|
#define PON_RESIN_N_SET BIT(1)
|
|
#define PON_GEN3_RESIN_N_SET BIT(6)
|
|
#define PON_GEN3_KPDPWR_N_SET BIT(7)
|
|
|
|
#define PON_PS_HOLD_RST_CTL 0x5a
|
|
#define PON_PS_HOLD_RST_CTL2 0x5b
|
|
#define PON_PS_HOLD_ENABLE BIT(7)
|
|
#define PON_PS_HOLD_TYPE_MASK 0x0f
|
|
#define PON_PS_HOLD_TYPE_SHUTDOWN 4
|
|
#define PON_PS_HOLD_TYPE_HARD_RESET 7
|
|
|
|
#define PON_PULL_CTL 0x70
|
|
#define PON_KPDPWR_PULL_UP BIT(1)
|
|
#define PON_RESIN_PULL_UP BIT(0)
|
|
|
|
#define PON_DBC_CTL 0x71
|
|
#define PON_DBC_DELAY_MASK 0x7
|
|
|
|
struct pm8941_data {
|
|
unsigned int pull_up_bit;
|
|
unsigned int status_bit;
|
|
bool supports_ps_hold_poff_config;
|
|
bool supports_debounce_config;
|
|
const char *name;
|
|
const char *phys;
|
|
};
|
|
|
|
struct pm8941_pwrkey {
|
|
struct device *dev;
|
|
int irq;
|
|
u32 baseaddr;
|
|
struct regmap *regmap;
|
|
struct input_dev *input;
|
|
|
|
unsigned int revision;
|
|
struct notifier_block reboot_notifier;
|
|
|
|
u32 code;
|
|
const struct pm8941_data *data;
|
|
};
|
|
|
|
static int pm8941_reboot_notify(struct notifier_block *nb,
|
|
unsigned long code, void *unused)
|
|
{
|
|
struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
|
|
reboot_notifier);
|
|
unsigned int enable_reg;
|
|
unsigned int reset_type;
|
|
int error;
|
|
|
|
/* PMICs with revision 0 have the enable bit in same register as ctrl */
|
|
if (pwrkey->revision == 0)
|
|
enable_reg = PON_PS_HOLD_RST_CTL;
|
|
else
|
|
enable_reg = PON_PS_HOLD_RST_CTL2;
|
|
|
|
error = regmap_update_bits(pwrkey->regmap,
|
|
pwrkey->baseaddr + enable_reg,
|
|
PON_PS_HOLD_ENABLE,
|
|
0);
|
|
if (error)
|
|
dev_err(pwrkey->dev,
|
|
"unable to clear ps hold reset enable: %d\n",
|
|
error);
|
|
|
|
/*
|
|
* Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
|
|
* writes.
|
|
*/
|
|
usleep_range(100, 1000);
|
|
|
|
switch (code) {
|
|
case SYS_HALT:
|
|
case SYS_POWER_OFF:
|
|
reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
|
|
break;
|
|
case SYS_RESTART:
|
|
default:
|
|
reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
|
|
break;
|
|
}
|
|
|
|
error = regmap_update_bits(pwrkey->regmap,
|
|
pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
|
|
PON_PS_HOLD_TYPE_MASK,
|
|
reset_type);
|
|
if (error)
|
|
dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
|
|
error);
|
|
|
|
error = regmap_update_bits(pwrkey->regmap,
|
|
pwrkey->baseaddr + enable_reg,
|
|
PON_PS_HOLD_ENABLE,
|
|
PON_PS_HOLD_ENABLE);
|
|
if (error)
|
|
dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
|
|
{
|
|
struct pm8941_pwrkey *pwrkey = _data;
|
|
unsigned int sts;
|
|
int error;
|
|
|
|
error = regmap_read(pwrkey->regmap,
|
|
pwrkey->baseaddr + PON_RT_STS, &sts);
|
|
if (error)
|
|
return IRQ_HANDLED;
|
|
|
|
input_report_key(pwrkey->input, pwrkey->code,
|
|
sts & pwrkey->data->status_bit);
|
|
input_sync(pwrkey->input);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
|
|
{
|
|
struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(pwrkey->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
|
|
{
|
|
struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(pwrkey->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
|
|
pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
|
|
|
|
static int pm8941_pwrkey_probe(struct platform_device *pdev)
|
|
{
|
|
struct pm8941_pwrkey *pwrkey;
|
|
bool pull_up;
|
|
struct device *parent;
|
|
u32 req_delay;
|
|
int error;
|
|
|
|
if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
|
|
req_delay = 15625;
|
|
|
|
if (req_delay > 2000000 || req_delay == 0) {
|
|
dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
|
|
|
|
pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
|
|
if (!pwrkey)
|
|
return -ENOMEM;
|
|
|
|
pwrkey->dev = &pdev->dev;
|
|
pwrkey->data = of_device_get_match_data(&pdev->dev);
|
|
|
|
parent = pdev->dev.parent;
|
|
pwrkey->regmap = dev_get_regmap(parent, NULL);
|
|
if (!pwrkey->regmap) {
|
|
/*
|
|
* We failed to get regmap for parent. Let's see if we are
|
|
* a child of pon node and read regmap and reg from its
|
|
* parent.
|
|
*/
|
|
pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
|
|
if (!pwrkey->regmap) {
|
|
dev_err(&pdev->dev, "failed to locate regmap\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
error = of_property_read_u32(parent->of_node,
|
|
"reg", &pwrkey->baseaddr);
|
|
} else {
|
|
error = of_property_read_u32(pdev->dev.of_node, "reg",
|
|
&pwrkey->baseaddr);
|
|
}
|
|
if (error)
|
|
return error;
|
|
|
|
pwrkey->irq = platform_get_irq(pdev, 0);
|
|
if (pwrkey->irq < 0)
|
|
return pwrkey->irq;
|
|
|
|
error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
|
|
&pwrkey->revision);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = of_property_read_u32(pdev->dev.of_node, "linux,code",
|
|
&pwrkey->code);
|
|
if (error) {
|
|
dev_dbg(&pdev->dev,
|
|
"no linux,code assuming power (%d)\n", error);
|
|
pwrkey->code = KEY_POWER;
|
|
}
|
|
|
|
pwrkey->input = devm_input_allocate_device(&pdev->dev);
|
|
if (!pwrkey->input) {
|
|
dev_dbg(&pdev->dev, "unable to allocate input device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
|
|
|
|
pwrkey->input->name = pwrkey->data->name;
|
|
pwrkey->input->phys = pwrkey->data->phys;
|
|
|
|
if (pwrkey->data->supports_debounce_config) {
|
|
req_delay = (req_delay << 6) / USEC_PER_SEC;
|
|
req_delay = ilog2(req_delay);
|
|
|
|
error = regmap_update_bits(pwrkey->regmap,
|
|
pwrkey->baseaddr + PON_DBC_CTL,
|
|
PON_DBC_DELAY_MASK,
|
|
req_delay);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to set debounce: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
if (pwrkey->data->pull_up_bit) {
|
|
error = regmap_update_bits(pwrkey->regmap,
|
|
pwrkey->baseaddr + PON_PULL_CTL,
|
|
pwrkey->data->pull_up_bit,
|
|
pull_up ? pwrkey->data->pull_up_bit :
|
|
0);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to set pull: %d\n", error);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
|
|
NULL, pm8941_pwrkey_irq,
|
|
IRQF_ONESHOT,
|
|
pwrkey->data->name, pwrkey);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = input_register_device(pwrkey->input);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to register input device: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
if (pwrkey->data->supports_ps_hold_poff_config) {
|
|
pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify;
|
|
error = register_reboot_notifier(&pwrkey->reboot_notifier);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pwrkey);
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pm8941_pwrkey_remove(struct platform_device *pdev)
|
|
{
|
|
struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
|
|
|
|
if (pwrkey->data->supports_ps_hold_poff_config)
|
|
unregister_reboot_notifier(&pwrkey->reboot_notifier);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pm8941_data pwrkey_data = {
|
|
.pull_up_bit = PON_KPDPWR_PULL_UP,
|
|
.status_bit = PON_KPDPWR_N_SET,
|
|
.name = "pm8941_pwrkey",
|
|
.phys = "pm8941_pwrkey/input0",
|
|
.supports_ps_hold_poff_config = true,
|
|
.supports_debounce_config = true,
|
|
};
|
|
|
|
static const struct pm8941_data resin_data = {
|
|
.pull_up_bit = PON_RESIN_PULL_UP,
|
|
.status_bit = PON_RESIN_N_SET,
|
|
.name = "pm8941_resin",
|
|
.phys = "pm8941_resin/input0",
|
|
.supports_ps_hold_poff_config = true,
|
|
.supports_debounce_config = true,
|
|
};
|
|
|
|
static const struct pm8941_data pon_gen3_pwrkey_data = {
|
|
.status_bit = PON_GEN3_KPDPWR_N_SET,
|
|
.name = "pmic_pwrkey",
|
|
.phys = "pmic_pwrkey/input0",
|
|
.supports_ps_hold_poff_config = false,
|
|
.supports_debounce_config = false,
|
|
};
|
|
|
|
static const struct pm8941_data pon_gen3_resin_data = {
|
|
.status_bit = PON_GEN3_RESIN_N_SET,
|
|
.name = "pmic_resin",
|
|
.phys = "pmic_resin/input0",
|
|
.supports_ps_hold_poff_config = false,
|
|
.supports_debounce_config = false,
|
|
};
|
|
|
|
static const struct of_device_id pm8941_pwr_key_id_table[] = {
|
|
{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
|
|
{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
|
|
{ .compatible = "qcom,pmk8350-pwrkey", .data = &pon_gen3_pwrkey_data },
|
|
{ .compatible = "qcom,pmk8350-resin", .data = &pon_gen3_resin_data },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
|
|
|
|
static struct platform_driver pm8941_pwrkey_driver = {
|
|
.probe = pm8941_pwrkey_probe,
|
|
.remove = pm8941_pwrkey_remove,
|
|
.driver = {
|
|
.name = "pm8941-pwrkey",
|
|
.pm = &pm8941_pwr_key_pm_ops,
|
|
.of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
|
|
},
|
|
};
|
|
module_platform_driver(pm8941_pwrkey_driver);
|
|
|
|
MODULE_DESCRIPTION("PM8941 Power Key driver");
|
|
MODULE_LICENSE("GPL v2");
|