475 lines
10 KiB
C
475 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* qt2160.c - Atmel AT42QT2160 Touch Sense Controller
|
|
*
|
|
* Copyright (C) 2009 Raphael Derosso Pereira <raphaelpereira@gmail.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/input.h>
|
|
|
|
#define QT2160_VALID_CHIPID 0x11
|
|
|
|
#define QT2160_CMD_CHIPID 0
|
|
#define QT2160_CMD_CODEVER 1
|
|
#define QT2160_CMD_GSTAT 2
|
|
#define QT2160_CMD_KEYS3 3
|
|
#define QT2160_CMD_KEYS4 4
|
|
#define QT2160_CMD_SLIDE 5
|
|
#define QT2160_CMD_GPIOS 6
|
|
#define QT2160_CMD_SUBVER 7
|
|
#define QT2160_CMD_CALIBRATE 10
|
|
#define QT2160_CMD_DRIVE_X 70
|
|
#define QT2160_CMD_PWMEN_X 74
|
|
#define QT2160_CMD_PWM_DUTY 76
|
|
|
|
#define QT2160_NUM_LEDS_X 8
|
|
|
|
#define QT2160_CYCLE_INTERVAL (2*HZ)
|
|
|
|
static unsigned char qt2160_key2code[] = {
|
|
KEY_0, KEY_1, KEY_2, KEY_3,
|
|
KEY_4, KEY_5, KEY_6, KEY_7,
|
|
KEY_8, KEY_9, KEY_A, KEY_B,
|
|
KEY_C, KEY_D, KEY_E, KEY_F,
|
|
};
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
struct qt2160_led {
|
|
struct qt2160_data *qt2160;
|
|
struct led_classdev cdev;
|
|
char name[32];
|
|
int id;
|
|
enum led_brightness brightness;
|
|
};
|
|
#endif
|
|
|
|
struct qt2160_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input;
|
|
struct delayed_work dwork;
|
|
unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
|
|
u16 key_matrix;
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
struct qt2160_led leds[QT2160_NUM_LEDS_X];
|
|
#endif
|
|
};
|
|
|
|
static int qt2160_read(struct i2c_client *client, u8 reg);
|
|
static int qt2160_write(struct i2c_client *client, u8 reg, u8 data);
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
|
|
static int qt2160_led_set(struct led_classdev *cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct qt2160_led *led = container_of(cdev, struct qt2160_led, cdev);
|
|
struct qt2160_data *qt2160 = led->qt2160;
|
|
struct i2c_client *client = qt2160->client;
|
|
u32 drive, pwmen;
|
|
|
|
if (value != led->brightness) {
|
|
drive = qt2160_read(client, QT2160_CMD_DRIVE_X);
|
|
pwmen = qt2160_read(client, QT2160_CMD_PWMEN_X);
|
|
if (value != LED_OFF) {
|
|
drive |= BIT(led->id);
|
|
pwmen |= BIT(led->id);
|
|
|
|
} else {
|
|
drive &= ~BIT(led->id);
|
|
pwmen &= ~BIT(led->id);
|
|
}
|
|
qt2160_write(client, QT2160_CMD_DRIVE_X, drive);
|
|
qt2160_write(client, QT2160_CMD_PWMEN_X, pwmen);
|
|
|
|
/*
|
|
* Changing this register will change the brightness
|
|
* of every LED in the qt2160. It's a HW limitation.
|
|
*/
|
|
if (value != LED_OFF)
|
|
qt2160_write(client, QT2160_CMD_PWM_DUTY, value);
|
|
|
|
led->brightness = value;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_LEDS_CLASS */
|
|
|
|
static int qt2160_read_block(struct i2c_client *client,
|
|
u8 inireg, u8 *buffer, unsigned int count)
|
|
{
|
|
int error, idx = 0;
|
|
|
|
/*
|
|
* Can't use SMBus block data read. Check for I2C functionality to speed
|
|
* things up whenever possible. Otherwise we will be forced to read
|
|
* sequentially.
|
|
*/
|
|
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
|
|
error = i2c_smbus_write_byte(client, inireg + idx);
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"couldn't send request. Returned %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = i2c_master_recv(client, buffer, count);
|
|
if (error != count) {
|
|
dev_err(&client->dev,
|
|
"couldn't read registers. Returned %d bytes\n", error);
|
|
return error;
|
|
}
|
|
} else {
|
|
|
|
while (count--) {
|
|
int data;
|
|
|
|
error = i2c_smbus_write_byte(client, inireg + idx);
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"couldn't send request. Returned %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
data = i2c_smbus_read_byte(client);
|
|
if (data < 0) {
|
|
dev_err(&client->dev,
|
|
"couldn't read register. Returned %d\n", data);
|
|
return data;
|
|
}
|
|
|
|
buffer[idx++] = data;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qt2160_get_key_matrix(struct qt2160_data *qt2160)
|
|
{
|
|
struct i2c_client *client = qt2160->client;
|
|
struct input_dev *input = qt2160->input;
|
|
u8 regs[6];
|
|
u16 old_matrix, new_matrix;
|
|
int ret, i, mask;
|
|
|
|
dev_dbg(&client->dev, "requesting keys...\n");
|
|
|
|
/*
|
|
* Read all registers from General Status Register
|
|
* to GPIOs register
|
|
*/
|
|
ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"could not perform chip read.\n");
|
|
return ret;
|
|
}
|
|
|
|
old_matrix = qt2160->key_matrix;
|
|
qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1];
|
|
|
|
mask = 0x01;
|
|
for (i = 0; i < 16; ++i, mask <<= 1) {
|
|
int keyval = new_matrix & mask;
|
|
|
|
if ((old_matrix & mask) != keyval) {
|
|
input_report_key(input, qt2160->keycodes[i], keyval);
|
|
dev_dbg(&client->dev, "key %d %s\n",
|
|
i, keyval ? "pressed" : "released");
|
|
}
|
|
}
|
|
|
|
input_sync(input);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t qt2160_irq(int irq, void *_qt2160)
|
|
{
|
|
struct qt2160_data *qt2160 = _qt2160;
|
|
|
|
mod_delayed_work(system_wq, &qt2160->dwork, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void qt2160_schedule_read(struct qt2160_data *qt2160)
|
|
{
|
|
schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL);
|
|
}
|
|
|
|
static void qt2160_worker(struct work_struct *work)
|
|
{
|
|
struct qt2160_data *qt2160 =
|
|
container_of(work, struct qt2160_data, dwork.work);
|
|
|
|
dev_dbg(&qt2160->client->dev, "worker\n");
|
|
|
|
qt2160_get_key_matrix(qt2160);
|
|
|
|
/* Avoid device lock up by checking every so often */
|
|
qt2160_schedule_read(qt2160);
|
|
}
|
|
|
|
static int qt2160_read(struct i2c_client *client, u8 reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte(client, reg);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"couldn't send request. Returned %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_read_byte(client);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"couldn't read register. Returned %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qt2160_write(struct i2c_client *client, u8 reg, u8 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, reg, data);
|
|
if (ret < 0)
|
|
dev_err(&client->dev,
|
|
"couldn't write data. Returned %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
|
|
static int qt2160_register_leds(struct qt2160_data *qt2160)
|
|
{
|
|
struct i2c_client *client = qt2160->client;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < QT2160_NUM_LEDS_X; i++) {
|
|
struct qt2160_led *led = &qt2160->leds[i];
|
|
|
|
snprintf(led->name, sizeof(led->name), "qt2160:x%d", i);
|
|
led->cdev.name = led->name;
|
|
led->cdev.brightness_set_blocking = qt2160_led_set;
|
|
led->cdev.brightness = LED_OFF;
|
|
led->id = i;
|
|
led->qt2160 = qt2160;
|
|
|
|
ret = led_classdev_register(&client->dev, &led->cdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* Tur off LEDs */
|
|
qt2160_write(client, QT2160_CMD_DRIVE_X, 0);
|
|
qt2160_write(client, QT2160_CMD_PWMEN_X, 0);
|
|
qt2160_write(client, QT2160_CMD_PWM_DUTY, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qt2160_unregister_leds(struct qt2160_data *qt2160)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < QT2160_NUM_LEDS_X; i++)
|
|
led_classdev_unregister(&qt2160->leds[i].cdev);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline int qt2160_register_leds(struct qt2160_data *qt2160)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void qt2160_unregister_leds(struct qt2160_data *qt2160)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
static bool qt2160_identify(struct i2c_client *client)
|
|
{
|
|
int id, ver, rev;
|
|
|
|
/* Read Chid ID to check if chip is valid */
|
|
id = qt2160_read(client, QT2160_CMD_CHIPID);
|
|
if (id != QT2160_VALID_CHIPID) {
|
|
dev_err(&client->dev, "ID %d not supported\n", id);
|
|
return false;
|
|
}
|
|
|
|
/* Read chip firmware version */
|
|
ver = qt2160_read(client, QT2160_CMD_CODEVER);
|
|
if (ver < 0) {
|
|
dev_err(&client->dev, "could not get firmware version\n");
|
|
return false;
|
|
}
|
|
|
|
/* Read chip firmware revision */
|
|
rev = qt2160_read(client, QT2160_CMD_SUBVER);
|
|
if (rev < 0) {
|
|
dev_err(&client->dev, "could not get firmware revision\n");
|
|
return false;
|
|
}
|
|
|
|
dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n",
|
|
ver >> 4, ver & 0xf, rev);
|
|
|
|
return true;
|
|
}
|
|
|
|
static int qt2160_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct qt2160_data *qt2160;
|
|
struct input_dev *input;
|
|
int i;
|
|
int error;
|
|
|
|
/* Check functionality */
|
|
error = i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE);
|
|
if (!error) {
|
|
dev_err(&client->dev, "%s adapter not supported\n",
|
|
dev_driver_string(&client->adapter->dev));
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!qt2160_identify(client))
|
|
return -ENODEV;
|
|
|
|
/* Chip is valid and active. Allocate structure */
|
|
qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
|
|
input = input_allocate_device();
|
|
if (!qt2160 || !input) {
|
|
dev_err(&client->dev, "insufficient memory\n");
|
|
error = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
qt2160->client = client;
|
|
qt2160->input = input;
|
|
INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker);
|
|
|
|
input->name = "AT42QT2160 Touch Sense Keyboard";
|
|
input->id.bustype = BUS_I2C;
|
|
|
|
input->keycode = qt2160->keycodes;
|
|
input->keycodesize = sizeof(qt2160->keycodes[0]);
|
|
input->keycodemax = ARRAY_SIZE(qt2160_key2code);
|
|
|
|
__set_bit(EV_KEY, input->evbit);
|
|
__clear_bit(EV_REP, input->evbit);
|
|
for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) {
|
|
qt2160->keycodes[i] = qt2160_key2code[i];
|
|
__set_bit(qt2160_key2code[i], input->keybit);
|
|
}
|
|
__clear_bit(KEY_RESERVED, input->keybit);
|
|
|
|
/* Calibrate device */
|
|
error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
|
|
if (error) {
|
|
dev_err(&client->dev, "failed to calibrate device\n");
|
|
goto err_free_mem;
|
|
}
|
|
|
|
if (client->irq) {
|
|
error = request_irq(client->irq, qt2160_irq,
|
|
IRQF_TRIGGER_FALLING, "qt2160", qt2160);
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"failed to allocate irq %d\n", client->irq);
|
|
goto err_free_mem;
|
|
}
|
|
}
|
|
|
|
error = qt2160_register_leds(qt2160);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to register leds\n");
|
|
goto err_free_irq;
|
|
}
|
|
|
|
error = input_register_device(qt2160->input);
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"Failed to register input device\n");
|
|
goto err_unregister_leds;
|
|
}
|
|
|
|
i2c_set_clientdata(client, qt2160);
|
|
qt2160_schedule_read(qt2160);
|
|
|
|
return 0;
|
|
|
|
err_unregister_leds:
|
|
qt2160_unregister_leds(qt2160);
|
|
err_free_irq:
|
|
if (client->irq)
|
|
free_irq(client->irq, qt2160);
|
|
err_free_mem:
|
|
input_free_device(input);
|
|
kfree(qt2160);
|
|
return error;
|
|
}
|
|
|
|
static int qt2160_remove(struct i2c_client *client)
|
|
{
|
|
struct qt2160_data *qt2160 = i2c_get_clientdata(client);
|
|
|
|
qt2160_unregister_leds(qt2160);
|
|
|
|
/* Release IRQ so no queue will be scheduled */
|
|
if (client->irq)
|
|
free_irq(client->irq, qt2160);
|
|
|
|
cancel_delayed_work_sync(&qt2160->dwork);
|
|
|
|
input_unregister_device(qt2160->input);
|
|
kfree(qt2160);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id qt2160_idtable[] = {
|
|
{ "qt2160", 0, },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, qt2160_idtable);
|
|
|
|
static struct i2c_driver qt2160_driver = {
|
|
.driver = {
|
|
.name = "qt2160",
|
|
},
|
|
|
|
.id_table = qt2160_idtable,
|
|
.probe = qt2160_probe,
|
|
.remove = qt2160_remove,
|
|
};
|
|
|
|
module_i2c_driver(qt2160_driver);
|
|
|
|
MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>");
|
|
MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor");
|
|
MODULE_LICENSE("GPL");
|