kernel/drivers/hwmon/pmbus/max34440.c
2024-07-22 17:22:30 +08:00

533 lines
16 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Hardware monitoring driver for Maxim MAX34440/MAX34441
*
* Copyright (c) 2011 Ericsson AB.
* Copyright (c) 2012 Guenter Roeck
*/
#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include "pmbus.h"
enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
#define MAX34440_MFR_VOUT_PEAK 0xd4
#define MAX34440_MFR_IOUT_PEAK 0xd5
#define MAX34440_MFR_TEMPERATURE_PEAK 0xd6
#define MAX34440_MFR_VOUT_MIN 0xd7
#define MAX34446_MFR_POUT_PEAK 0xe0
#define MAX34446_MFR_POUT_AVG 0xe1
#define MAX34446_MFR_IOUT_AVG 0xe2
#define MAX34446_MFR_TEMPERATURE_AVG 0xe3
#define MAX34440_STATUS_OC_WARN BIT(0)
#define MAX34440_STATUS_OC_FAULT BIT(1)
#define MAX34440_STATUS_OT_FAULT BIT(5)
#define MAX34440_STATUS_OT_WARN BIT(6)
/*
* The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT
* swapped from the standard pmbus spec addresses.
*/
#define MAX34440_IOUT_OC_WARN_LIMIT 0x46
#define MAX34440_IOUT_OC_FAULT_LIMIT 0x4A
#define MAX34451_MFR_CHANNEL_CONFIG 0xe4
#define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK 0x3f
struct max34440_data {
int id;
struct pmbus_driver_info info;
};
#define to_max34440_data(x) container_of(x, struct max34440_data, info)
static const struct i2c_device_id max34440_id[];
static int max34440_read_word_data(struct i2c_client *client, int page,
int phase, int reg)
{
int ret;
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
const struct max34440_data *data = to_max34440_data(info);
switch (reg) {
case PMBUS_IOUT_OC_FAULT_LIMIT:
ret = pmbus_read_word_data(client, page, phase,
MAX34440_IOUT_OC_FAULT_LIMIT);
break;
case PMBUS_IOUT_OC_WARN_LIMIT:
ret = pmbus_read_word_data(client, page, phase,
MAX34440_IOUT_OC_WARN_LIMIT);
break;
case PMBUS_VIRT_READ_VOUT_MIN:
ret = pmbus_read_word_data(client, page, phase,
MAX34440_MFR_VOUT_MIN);
break;
case PMBUS_VIRT_READ_VOUT_MAX:
ret = pmbus_read_word_data(client, page, phase,
MAX34440_MFR_VOUT_PEAK);
break;
case PMBUS_VIRT_READ_IOUT_AVG:
if (data->id != max34446 && data->id != max34451)
return -ENXIO;
ret = pmbus_read_word_data(client, page, phase,
MAX34446_MFR_IOUT_AVG);
break;
case PMBUS_VIRT_READ_IOUT_MAX:
ret = pmbus_read_word_data(client, page, phase,
MAX34440_MFR_IOUT_PEAK);
break;
case PMBUS_VIRT_READ_POUT_AVG:
if (data->id != max34446)
return -ENXIO;
ret = pmbus_read_word_data(client, page, phase,
MAX34446_MFR_POUT_AVG);
break;
case PMBUS_VIRT_READ_POUT_MAX:
if (data->id != max34446)
return -ENXIO;
ret = pmbus_read_word_data(client, page, phase,
MAX34446_MFR_POUT_PEAK);
break;
case PMBUS_VIRT_READ_TEMP_AVG:
if (data->id != max34446 && data->id != max34460 &&
data->id != max34461)
return -ENXIO;
ret = pmbus_read_word_data(client, page, phase,
MAX34446_MFR_TEMPERATURE_AVG);
break;
case PMBUS_VIRT_READ_TEMP_MAX:
ret = pmbus_read_word_data(client, page, phase,
MAX34440_MFR_TEMPERATURE_PEAK);
break;
case PMBUS_VIRT_RESET_POUT_HISTORY:
if (data->id != max34446)
return -ENXIO;
ret = 0;
break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
case PMBUS_VIRT_RESET_IOUT_HISTORY:
case PMBUS_VIRT_RESET_TEMP_HISTORY:
ret = 0;
break;
default:
ret = -ENODATA;
break;
}
return ret;
}
static int max34440_write_word_data(struct i2c_client *client, int page,
int reg, u16 word)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
const struct max34440_data *data = to_max34440_data(info);
int ret;
switch (reg) {
case PMBUS_IOUT_OC_FAULT_LIMIT:
ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_FAULT_LIMIT,
word);
break;
case PMBUS_IOUT_OC_WARN_LIMIT:
ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_WARN_LIMIT,
word);
break;
case PMBUS_VIRT_RESET_POUT_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34446_MFR_POUT_PEAK, 0);
if (ret)
break;
ret = pmbus_write_word_data(client, page,
MAX34446_MFR_POUT_AVG, 0);
break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_VOUT_MIN, 0x7fff);
if (ret)
break;
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_VOUT_PEAK, 0);
break;
case PMBUS_VIRT_RESET_IOUT_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_IOUT_PEAK, 0);
if (!ret && (data->id == max34446 || data->id == max34451))
ret = pmbus_write_word_data(client, page,
MAX34446_MFR_IOUT_AVG, 0);
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_TEMPERATURE_PEAK,
0x8000);
if (!ret && data->id == max34446)
ret = pmbus_write_word_data(client, page,
MAX34446_MFR_TEMPERATURE_AVG, 0);
break;
default:
ret = -ENODATA;
break;
}
return ret;
}
static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
{
int ret = 0;
int mfg_status;
if (page >= 0) {
ret = pmbus_set_page(client, page, 0xff);
if (ret < 0)
return ret;
}
switch (reg) {
case PMBUS_STATUS_IOUT:
mfg_status = pmbus_read_word_data(client, 0, 0xff,
PMBUS_STATUS_MFR_SPECIFIC);
if (mfg_status < 0)
return mfg_status;
if (mfg_status & MAX34440_STATUS_OC_WARN)
ret |= PB_IOUT_OC_WARNING;
if (mfg_status & MAX34440_STATUS_OC_FAULT)
ret |= PB_IOUT_OC_FAULT;
break;
case PMBUS_STATUS_TEMPERATURE:
mfg_status = pmbus_read_word_data(client, 0, 0xff,
PMBUS_STATUS_MFR_SPECIFIC);
if (mfg_status < 0)
return mfg_status;
if (mfg_status & MAX34440_STATUS_OT_WARN)
ret |= PB_TEMP_OT_WARNING;
if (mfg_status & MAX34440_STATUS_OT_FAULT)
ret |= PB_TEMP_OT_FAULT;
break;
default:
ret = -ENODATA;
break;
}
return ret;
}
static int max34451_set_supported_funcs(struct i2c_client *client,
struct max34440_data *data)
{
/*
* Each of the channel 0-15 can be configured to monitor the following
* functions based on MFR_CHANNEL_CONFIG[5:0]
* 0x10: Sequencing + voltage monitoring (only valid for PAGES 011)
* 0x20: Voltage monitoring (no sequencing)
* 0x21: Voltage read only
* 0x22: Current monitoring
* 0x23: Current read only
* 0x30: General-purpose input active low
* 0x34: General-purpose input active high
* 0x00: Disabled
*/
int page, rv;
for (page = 0; page < 16; page++) {
rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
if (rv < 0)
return rv;
rv = i2c_smbus_read_word_data(client,
MAX34451_MFR_CHANNEL_CONFIG);
if (rv < 0)
return rv;
switch (rv & MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK) {
case 0x10:
case 0x20:
data->info.func[page] = PMBUS_HAVE_VOUT |
PMBUS_HAVE_STATUS_VOUT;
break;
case 0x21:
data->info.func[page] = PMBUS_HAVE_VOUT;
break;
case 0x22:
data->info.func[page] = PMBUS_HAVE_IOUT |
PMBUS_HAVE_STATUS_IOUT;
break;
case 0x23:
data->info.func[page] = PMBUS_HAVE_IOUT;
break;
default:
break;
}
}
return 0;
}
static struct pmbus_driver_info max34440_info[] = {
[max34440] = {
.pages = 14,
.format[PSC_VOLTAGE_IN] = direct,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_TEMPERATURE] = direct,
.format[PSC_CURRENT_OUT] = direct,
.m[PSC_VOLTAGE_IN] = 1,
.b[PSC_VOLTAGE_IN] = 0,
.R[PSC_VOLTAGE_IN] = 3, /* R = 0 in datasheet reflects mV */
.m[PSC_VOLTAGE_OUT] = 1,
.b[PSC_VOLTAGE_OUT] = 0,
.R[PSC_VOLTAGE_OUT] = 3, /* R = 0 in datasheet reflects mV */
.m[PSC_CURRENT_OUT] = 1,
.b[PSC_CURRENT_OUT] = 0,
.R[PSC_CURRENT_OUT] = 3, /* R = 0 in datasheet reflects mA */
.m[PSC_TEMPERATURE] = 1,
.b[PSC_TEMPERATURE] = 0,
.R[PSC_TEMPERATURE] = 2,
.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[12] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.read_byte_data = max34440_read_byte_data,
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
[max34441] = {
.pages = 12,
.format[PSC_VOLTAGE_IN] = direct,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_TEMPERATURE] = direct,
.format[PSC_CURRENT_OUT] = direct,
.format[PSC_FAN] = direct,
.m[PSC_VOLTAGE_IN] = 1,
.b[PSC_VOLTAGE_IN] = 0,
.R[PSC_VOLTAGE_IN] = 3,
.m[PSC_VOLTAGE_OUT] = 1,
.b[PSC_VOLTAGE_OUT] = 0,
.R[PSC_VOLTAGE_OUT] = 3,
.m[PSC_CURRENT_OUT] = 1,
.b[PSC_CURRENT_OUT] = 0,
.R[PSC_CURRENT_OUT] = 3,
.m[PSC_TEMPERATURE] = 1,
.b[PSC_TEMPERATURE] = 0,
.R[PSC_TEMPERATURE] = 2,
.m[PSC_FAN] = 1,
.b[PSC_FAN] = 0,
.R[PSC_FAN] = 0,
.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[5] = PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.read_byte_data = max34440_read_byte_data,
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
[max34446] = {
.pages = 7,
.format[PSC_VOLTAGE_IN] = direct,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_TEMPERATURE] = direct,
.format[PSC_CURRENT_OUT] = direct,
.format[PSC_POWER] = direct,
.m[PSC_VOLTAGE_IN] = 1,
.b[PSC_VOLTAGE_IN] = 0,
.R[PSC_VOLTAGE_IN] = 3,
.m[PSC_VOLTAGE_OUT] = 1,
.b[PSC_VOLTAGE_OUT] = 0,
.R[PSC_VOLTAGE_OUT] = 3,
.m[PSC_CURRENT_OUT] = 1,
.b[PSC_CURRENT_OUT] = 0,
.R[PSC_CURRENT_OUT] = 3,
.m[PSC_POWER] = 1,
.b[PSC_POWER] = 0,
.R[PSC_POWER] = 3,
.m[PSC_TEMPERATURE] = 1,
.b[PSC_TEMPERATURE] = 0,
.R[PSC_TEMPERATURE] = 2,
.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
.func[4] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[5] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.read_byte_data = max34440_read_byte_data,
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
[max34451] = {
.pages = 21,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_TEMPERATURE] = direct,
.format[PSC_CURRENT_OUT] = direct,
.m[PSC_VOLTAGE_OUT] = 1,
.b[PSC_VOLTAGE_OUT] = 0,
.R[PSC_VOLTAGE_OUT] = 3,
.m[PSC_CURRENT_OUT] = 1,
.b[PSC_CURRENT_OUT] = 0,
.R[PSC_CURRENT_OUT] = 2,
.m[PSC_TEMPERATURE] = 1,
.b[PSC_TEMPERATURE] = 0,
.R[PSC_TEMPERATURE] = 2,
/* func 0-15 is set dynamically before probing */
.func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
[max34460] = {
.pages = 18,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_TEMPERATURE] = direct,
.m[PSC_VOLTAGE_OUT] = 1,
.b[PSC_VOLTAGE_OUT] = 0,
.R[PSC_VOLTAGE_OUT] = 3,
.m[PSC_TEMPERATURE] = 1,
.b[PSC_TEMPERATURE] = 0,
.R[PSC_TEMPERATURE] = 2,
.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[14] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[15] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
[max34461] = {
.pages = 23,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_TEMPERATURE] = direct,
.m[PSC_VOLTAGE_OUT] = 1,
.b[PSC_VOLTAGE_OUT] = 0,
.R[PSC_VOLTAGE_OUT] = 3,
.m[PSC_TEMPERATURE] = 1,
.b[PSC_TEMPERATURE] = 0,
.R[PSC_TEMPERATURE] = 2,
.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[12] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[13] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[14] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[15] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
/* page 16 is reserved */
.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.func[21] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
.read_word_data = max34440_read_word_data,
.write_word_data = max34440_write_word_data,
},
};
static int max34440_probe(struct i2c_client *client)
{
struct max34440_data *data;
int rv;
data = devm_kzalloc(&client->dev, sizeof(struct max34440_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
data->id = i2c_match_id(max34440_id, client)->driver_data;
data->info = max34440_info[data->id];
if (data->id == max34451) {
rv = max34451_set_supported_funcs(client, data);
if (rv)
return rv;
}
return pmbus_do_probe(client, &data->info);
}
static const struct i2c_device_id max34440_id[] = {
{"max34440", max34440},
{"max34441", max34441},
{"max34446", max34446},
{"max34451", max34451},
{"max34460", max34460},
{"max34461", max34461},
{}
};
MODULE_DEVICE_TABLE(i2c, max34440_id);
/* This is the driver that will be inserted */
static struct i2c_driver max34440_driver = {
.driver = {
.name = "max34440",
},
.probe_new = max34440_probe,
.id_table = max34440_id,
};
module_i2c_driver(max34440_driver);
MODULE_AUTHOR("Guenter Roeck");
MODULE_DESCRIPTION("PMBus driver for Maxim MAX34440/MAX34441");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(PMBUS);