kernel/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
2024-07-22 17:22:30 +08:00

219 lines
6.1 KiB
C

// SPDX-License-Identifier: MIT
/*
* Copyright © 2020 Intel Corporation
*/
#include "i915_drv.h"
#include "intel_gt.h"
#include "intel_gt_clock_utils.h"
static u32 read_reference_ts_freq(struct intel_uncore *uncore)
{
u32 ts_override = intel_uncore_read(uncore, GEN9_TIMESTAMP_OVERRIDE);
u32 base_freq, frac_freq;
base_freq = ((ts_override & GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_MASK) >>
GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_SHIFT) + 1;
base_freq *= 1000000;
frac_freq = ((ts_override &
GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_MASK) >>
GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_SHIFT);
frac_freq = 1000000 / (frac_freq + 1);
return base_freq + frac_freq;
}
static u32 gen9_get_crystal_clock_freq(struct intel_uncore *uncore,
u32 rpm_config_reg)
{
u32 f19_2_mhz = 19200000;
u32 f24_mhz = 24000000;
u32 crystal_clock =
(rpm_config_reg & GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK) >>
GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_SHIFT;
switch (crystal_clock) {
case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_19_2_MHZ:
return f19_2_mhz;
case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_24_MHZ:
return f24_mhz;
default:
MISSING_CASE(crystal_clock);
return 0;
}
}
static u32 gen11_get_crystal_clock_freq(struct intel_uncore *uncore,
u32 rpm_config_reg)
{
u32 f19_2_mhz = 19200000;
u32 f24_mhz = 24000000;
u32 f25_mhz = 25000000;
u32 f38_4_mhz = 38400000;
u32 crystal_clock =
(rpm_config_reg & GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK) >>
GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_SHIFT;
switch (crystal_clock) {
case GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_24_MHZ:
return f24_mhz;
case GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_19_2_MHZ:
return f19_2_mhz;
case GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_38_4_MHZ:
return f38_4_mhz;
case GEN11_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_25_MHZ:
return f25_mhz;
default:
MISSING_CASE(crystal_clock);
return 0;
}
}
static u32 read_clock_frequency(struct intel_uncore *uncore)
{
u32 f12_5_mhz = 12500000;
u32 f19_2_mhz = 19200000;
u32 f24_mhz = 24000000;
if (GRAPHICS_VER(uncore->i915) <= 4) {
/*
* PRMs say:
*
* "The value in this register increments once every 16
* hclks." (through the “Clocking Configuration”
* (“CLKCFG”) MCHBAR register)
*/
return RUNTIME_INFO(uncore->i915)->rawclk_freq * 1000 / 16;
} else if (GRAPHICS_VER(uncore->i915) <= 8) {
/*
* PRMs say:
*
* "The PCU TSC counts 10ns increments; this timestamp
* reflects bits 38:3 of the TSC (i.e. 80ns granularity,
* rolling over every 1.5 hours).
*/
return f12_5_mhz;
} else if (GRAPHICS_VER(uncore->i915) <= 9) {
u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
u32 freq = 0;
if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
freq = read_reference_ts_freq(uncore);
} else {
freq = IS_GEN9_LP(uncore->i915) ? f19_2_mhz : f24_mhz;
/*
* Now figure out how the command stream's timestamp
* register increments from this frequency (it might
* increment only every few clock cycle).
*/
freq >>= 3 - ((ctc_reg & CTC_SHIFT_PARAMETER_MASK) >>
CTC_SHIFT_PARAMETER_SHIFT);
}
return freq;
} else if (GRAPHICS_VER(uncore->i915) <= 12) {
u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
u32 freq = 0;
/*
* First figure out the reference frequency. There are 2 ways
* we can compute the frequency, either through the
* TIMESTAMP_OVERRIDE register or through RPM_CONFIG. CTC_MODE
* tells us which one we should use.
*/
if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
freq = read_reference_ts_freq(uncore);
} else {
u32 c0 = intel_uncore_read(uncore, RPM_CONFIG0);
if (GRAPHICS_VER(uncore->i915) >= 11)
freq = gen11_get_crystal_clock_freq(uncore, c0);
else
freq = gen9_get_crystal_clock_freq(uncore, c0);
/*
* Now figure out how the command stream's timestamp
* register increments from this frequency (it might
* increment only every few clock cycle).
*/
freq >>= 3 - ((c0 & GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK) >>
GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_SHIFT);
}
return freq;
}
MISSING_CASE("Unknown gen, unable to read command streamer timestamp frequency\n");
return 0;
}
void intel_gt_init_clock_frequency(struct intel_gt *gt)
{
/*
* Note that on gen11+, the clock frequency may be reconfigured.
* We do not, and we assume nobody else does.
*/
gt->clock_frequency = read_clock_frequency(gt->uncore);
if (gt->clock_frequency)
gt->clock_period_ns = intel_gt_clock_interval_to_ns(gt, 1);
GT_TRACE(gt,
"Using clock frequency: %dkHz, period: %dns, wrap: %lldms\n",
gt->clock_frequency / 1000,
gt->clock_period_ns,
div_u64(mul_u32_u32(gt->clock_period_ns, S32_MAX),
USEC_PER_SEC));
}
#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)
void intel_gt_check_clock_frequency(const struct intel_gt *gt)
{
if (gt->clock_frequency != read_clock_frequency(gt->uncore)) {
dev_err(gt->i915->drm.dev,
"GT clock frequency changed, was %uHz, now %uHz!\n",
gt->clock_frequency,
read_clock_frequency(gt->uncore));
}
}
#endif
static u64 div_u64_roundup(u64 nom, u32 den)
{
return div_u64(nom + den - 1, den);
}
u64 intel_gt_clock_interval_to_ns(const struct intel_gt *gt, u64 count)
{
return div_u64_roundup(count * NSEC_PER_SEC, gt->clock_frequency);
}
u64 intel_gt_pm_interval_to_ns(const struct intel_gt *gt, u64 count)
{
return intel_gt_clock_interval_to_ns(gt, 16 * count);
}
u64 intel_gt_ns_to_clock_interval(const struct intel_gt *gt, u64 ns)
{
return div_u64_roundup(gt->clock_frequency * ns, NSEC_PER_SEC);
}
u64 intel_gt_ns_to_pm_interval(const struct intel_gt *gt, u64 ns)
{
u64 val;
/*
* Make these a multiple of magic 25 to avoid SNB (eg. Dell XPS
* 8300) freezing up around GPU hangs. Looks as if even
* scheduling/timer interrupts start misbehaving if the RPS
* EI/thresholds are "bad", leading to a very sluggish or even
* frozen machine.
*/
val = div_u64_roundup(intel_gt_ns_to_clock_interval(gt, ns), 16);
if (GRAPHICS_VER(gt->i915) == 6)
val = div_u64_roundup(val, 25) * 25;
return val;
}