112 lines
3.5 KiB
ReStructuredText
112 lines
3.5 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
.. include:: <isonum.txt>
|
|
|
|
========================================
|
|
Describing and referring to LEDs in ACPI
|
|
========================================
|
|
|
|
Individual LEDs are described by hierarchical data extension [6] nodes under the
|
|
device node, the LED driver chip. The "reg" property in the LED specific nodes
|
|
tells the numerical ID of each individual LED output to which the LEDs are
|
|
connected. [3] The hierarchical data nodes are named "led@X", where X is the
|
|
number of the LED output.
|
|
|
|
Referring to LEDs in Device tree is documented in [4], in "flash-leds" property
|
|
documentation. In short, LEDs are directly referred to by using phandles.
|
|
|
|
While Device tree allows referring to any node in the tree[1], in ACPI
|
|
references are limited to device nodes only [2]. For this reason using the same
|
|
mechanism on ACPI is not possible. A mechanism to refer to non-device ACPI nodes
|
|
is documented in [7].
|
|
|
|
ACPI allows (as does DT) using integer arguments after the reference. A
|
|
combination of the LED driver device reference and an integer argument,
|
|
referring to the "reg" property of the relevant LED, is used to identify
|
|
individual LEDs. The value of the "reg" property is a contract between the
|
|
firmware and software, it uniquely identifies the LED driver outputs.
|
|
|
|
Under the LED driver device, The first hierarchical data extension package list
|
|
entry shall contain the string "led@" followed by the number of the LED,
|
|
followed by the referred object name. That object shall be named "LED" followed
|
|
by the number of the LED.
|
|
|
|
Example
|
|
=======
|
|
|
|
An ASL example of a camera sensor device and a LED driver device for two LEDs is
|
|
show below. Objects not relevant for LEDs or the references to them have been
|
|
omitted. ::
|
|
|
|
Device (LED)
|
|
{
|
|
Name (_DSD, Package () {
|
|
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
|
|
Package () {
|
|
Package () { "led@0", LED0 },
|
|
Package () { "led@1", LED1 },
|
|
}
|
|
})
|
|
Name (LED0, Package () {
|
|
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
Package () {
|
|
Package () { "reg", 0 },
|
|
Package () { "flash-max-microamp", 1000000 },
|
|
Package () { "flash-timeout-us", 200000 },
|
|
Package () { "led-max-microamp", 100000 },
|
|
Package () { "label", "white:flash" },
|
|
}
|
|
})
|
|
Name (LED1, Package () {
|
|
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
Package () {
|
|
Package () { "reg", 1 },
|
|
Package () { "led-max-microamp", 10000 },
|
|
Package () { "label", "red:indicator" },
|
|
}
|
|
})
|
|
}
|
|
|
|
Device (SEN)
|
|
{
|
|
Name (_DSD, Package () {
|
|
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
|
|
Package () {
|
|
Package () {
|
|
"flash-leds",
|
|
Package () { ^LED, "led@0", ^LED, "led@1" },
|
|
}
|
|
}
|
|
})
|
|
}
|
|
|
|
where
|
|
::
|
|
|
|
LED LED driver device
|
|
LED0 First LED
|
|
LED1 Second LED
|
|
SEN Camera sensor device (or another device the LED is related to)
|
|
|
|
References
|
|
==========
|
|
|
|
[1] Device tree. https://www.devicetree.org, referenced 2019-02-21.
|
|
|
|
[2] Advanced Configuration and Power Interface Specification.
|
|
https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf,
|
|
referenced 2019-02-21.
|
|
|
|
[3] Documentation/devicetree/bindings/leds/common.txt
|
|
|
|
[4] Documentation/devicetree/bindings/media/video-interfaces.txt
|
|
|
|
[5] Device Properties UUID For _DSD.
|
|
https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf,
|
|
referenced 2019-02-21.
|
|
|
|
[6] Hierarchical Data Extension UUID For _DSD.
|
|
https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf,
|
|
referenced 2019-02-21.
|
|
|
|
[7] Documentation/firmware-guide/acpi/dsd/data-node-references.rst
|