119 lines
3.6 KiB
Plaintext
119 lines
3.6 KiB
Plaintext
Atmel SOC USB controllers
|
|
|
|
OHCI
|
|
|
|
Required properties:
|
|
- compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
|
|
used in host mode.
|
|
- reg: Address and length of the register set for the device
|
|
- interrupts: Should contain ohci interrupt
|
|
- clocks: Should reference the peripheral, host and system clocks
|
|
- clock-names: Should contain three strings
|
|
"ohci_clk" for the peripheral clock
|
|
"hclk" for the host clock
|
|
"uhpck" for the system clock
|
|
- num-ports: Number of ports.
|
|
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
|
|
activated for the bus to be powered.
|
|
- atmel,oc-gpio: If present, specifies a gpio that needs to be
|
|
activated for the overcurrent detection.
|
|
|
|
usb0: ohci@500000 {
|
|
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
|
reg = <0x00500000 0x100000>;
|
|
clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
|
|
clock-names = "ohci_clk", "hclk", "uhpck";
|
|
interrupts = <20 4>;
|
|
num-ports = <2>;
|
|
};
|
|
|
|
EHCI
|
|
|
|
Required properties:
|
|
- compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
|
|
used in host mode.
|
|
- reg: Address and length of the register set for the device
|
|
- interrupts: Should contain ehci interrupt
|
|
- clocks: Should reference the peripheral and the UTMI clocks
|
|
- clock-names: Should contain two strings
|
|
"ehci_clk" for the peripheral clock
|
|
"usb_clk" for the UTMI clock
|
|
|
|
usb1: ehci@800000 {
|
|
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
|
|
reg = <0x00800000 0x100000>;
|
|
interrupts = <22 4>;
|
|
clocks = <&utmi>, <&uhphs_clk>;
|
|
clock-names = "usb_clk", "ehci_clk";
|
|
};
|
|
|
|
AT91 USB device controller
|
|
|
|
Required properties:
|
|
- compatible: Should be one of the following
|
|
"atmel,at91rm9200-udc"
|
|
"atmel,at91sam9260-udc"
|
|
"atmel,at91sam9261-udc"
|
|
"atmel,at91sam9263-udc"
|
|
- reg: Address and length of the register set for the device
|
|
- interrupts: Should contain macb interrupt
|
|
- clocks: Should reference the peripheral and the AHB clocks
|
|
- clock-names: Should contain two strings
|
|
"pclk" for the peripheral clock
|
|
"hclk" for the AHB clock
|
|
|
|
Optional properties:
|
|
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
|
|
activated for the bus to be powered.
|
|
|
|
usb1: gadget@fffa4000 {
|
|
compatible = "atmel,at91rm9200-udc";
|
|
reg = <0xfffa4000 0x4000>;
|
|
interrupts = <10 4>;
|
|
clocks = <&udc_clk>, <&udpck>;
|
|
clock-names = "pclk", "hclk";
|
|
atmel,vbus-gpio = <&pioC 5 0>;
|
|
};
|
|
|
|
Atmel High-Speed USB device controller
|
|
|
|
Required properties:
|
|
- compatible: Should be one of the following
|
|
"atmel,at91sam9rl-udc"
|
|
"atmel,at91sam9g45-udc"
|
|
"atmel,sama5d3-udc"
|
|
"microchip,sam9x60-udc"
|
|
- reg: Address and length of the register set for the device
|
|
- interrupts: Should contain usba interrupt
|
|
- clocks: Should reference the peripheral and host clocks
|
|
- clock-names: Should contain two strings
|
|
"pclk" for the peripheral clock
|
|
"hclk" for the host clock
|
|
|
|
Deprecated property:
|
|
- ep childnode: To specify the number of endpoints and their properties.
|
|
|
|
Optional properties:
|
|
- atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
|
|
vbus is present (USB is connected).
|
|
|
|
Deprecated child node properties:
|
|
- name: Name of the endpoint.
|
|
- reg: Num of the endpoint.
|
|
- atmel,fifo-size: Size of the fifo.
|
|
- atmel,nb-banks: Number of banks.
|
|
- atmel,can-dma: Boolean to specify if the endpoint support DMA.
|
|
- atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
|
|
|
|
usb2: gadget@fff78000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "atmel,at91sam9rl-udc";
|
|
reg = <0x00600000 0x80000
|
|
0xfff78000 0x400>;
|
|
interrupts = <27 4 0>;
|
|
clocks = <&utmi>, <&udphs_clk>;
|
|
clock-names = "hclk", "pclk";
|
|
atmel,vbus-gpio = <&pioB 19 0>;
|
|
};
|