60 lines
934 B
Plaintext
60 lines
934 B
Plaintext
MAX98090 audio CODEC
|
|
|
|
This device supports I2C only.
|
|
|
|
Required properties:
|
|
|
|
- compatible : "maxim,max98090" or "maxim,max98091".
|
|
|
|
- reg : The I2C address of the device.
|
|
|
|
- interrupts : The CODEC's interrupt output.
|
|
|
|
Optional properties:
|
|
|
|
- clocks: The phandle of the master clock to the CODEC
|
|
|
|
- clock-names: Should be "mclk"
|
|
|
|
- #sound-dai-cells : should be 0.
|
|
|
|
- maxim,dmic-freq: Frequency at which to clock DMIC
|
|
|
|
- maxim,micbias: Micbias voltage applies to the analog mic, valid voltages value are:
|
|
0 - 2.2v
|
|
1 - 2.55v
|
|
2 - 2.4v
|
|
3 - 2.8v
|
|
|
|
Pins on the device (for linking into audio routes):
|
|
|
|
* MIC1
|
|
* MIC2
|
|
* DMICL
|
|
* DMICR
|
|
* IN1
|
|
* IN2
|
|
* IN3
|
|
* IN4
|
|
* IN5
|
|
* IN6
|
|
* IN12
|
|
* IN34
|
|
* IN56
|
|
* HPL
|
|
* HPR
|
|
* SPKL
|
|
* SPKR
|
|
* RCVL
|
|
* RCVR
|
|
* MICBIAS
|
|
|
|
Example:
|
|
|
|
audio-codec@10 {
|
|
compatible = "maxim,max98090";
|
|
reg = <0x10>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|