kernel/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
2024-07-22 17:22:30 +08:00

81 lines
1.8 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm PON Device
maintainers:
- Vinod Koul <vkoul@kernel.org>
description: |
The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
and resin along with the Android reboot-mode.
This DT node has pwrkey and resin as sub nodes.
allOf:
- $ref: reboot-mode.yaml#
properties:
compatible:
enum:
- qcom,pm8916-pon
- qcom,pms405-pon
- qcom,pm8998-pon
reg:
maxItems: 1
pwrkey:
type: object
$ref: "../../input/qcom,pm8941-pwrkey.yaml#"
resin:
type: object
$ref: "../../input/qcom,pm8941-pwrkey.yaml#"
required:
- compatible
- reg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/spmi/spmi.h>
spmi_bus: spmi@c440000 {
reg = <0x0c440000 0x1100>;
#address-cells = <2>;
#size-cells = <0>;
pmk8350: pmic@0 {
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmk8350_pon: pon_hlos@1300 {
reg = <0x1300>;
compatible = "qcom,pm8998-pon";
pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
resin {
compatible = "qcom,pm8941-resin";
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_VOLUMEDOWN>;
};
};
};
};
...