133 lines
4.3 KiB
YAML
133 lines
4.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
title: Qualcomm Technologies, Inc. SM6125 TLMM block
|
|
|
|
maintainers:
|
|
- Martin Botka <martin.botka@somainline.org>
|
|
|
|
description: |
|
|
This binding describes the Top Level Mode Multiplexer (TLMM) block found
|
|
in the SM6125 platform.
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,sm6125-tlmm
|
|
|
|
reg:
|
|
minItems: 3
|
|
maxItems: 3
|
|
|
|
reg-names:
|
|
items:
|
|
- const: "west"
|
|
- const: "south"
|
|
- const: "east"
|
|
|
|
interrupts: true
|
|
interrupt-controller: true
|
|
'#interrupt-cells': true
|
|
gpio-controller: true
|
|
gpio-reserved-ranges: true
|
|
'#gpio-cells': true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
'-state$':
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-sm6125-tlmm-state"
|
|
- patternProperties:
|
|
".*":
|
|
$ref: "#/$defs/qcom-sm6125-tlmm-state"
|
|
|
|
$defs:
|
|
qcom-sm6125-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
|
|
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
|
|
atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
|
|
atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
|
|
atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
|
|
audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
|
|
cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
|
|
cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
|
|
ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
|
|
dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
|
|
gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
|
|
ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
|
|
mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
|
|
nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset,
|
|
pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable,
|
|
qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04,
|
|
qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx,
|
|
swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
|
|
uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
|
|
uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
|
|
wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
|
|
|
|
|
|
bias-disable: true
|
|
bias-pull-down: true
|
|
bias-pull-up: true
|
|
drive-strength: true
|
|
input-enable: true
|
|
output-high: true
|
|
output-low: true
|
|
|
|
required:
|
|
- pins
|
|
- function
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
pinctrl@500000 {
|
|
compatible = "qcom,sm6125-tlmm";
|
|
reg = <0x00500000 0x400000>,
|
|
<0x00900000 0x400000>,
|
|
<0x00d00000 0x400000>;
|
|
reg-names = "west", "south", "east";
|
|
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
gpio-ranges = <&tlmm 0 0 134>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|