54 lines
1.4 KiB
Plaintext
54 lines
1.4 KiB
Plaintext
* Freescale i.MX7ULP IOMUX Controller
|
|
|
|
i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7
|
|
ports and IOMUXC DDR for DDR interface.
|
|
|
|
Note:
|
|
This binding doc is only for the IOMUXC1 support in A7 Domain and it only
|
|
supports generic pin config.
|
|
|
|
Please refer to fsl,imx-pinctrl.txt in this directory for common binding
|
|
part and usage.
|
|
|
|
Required properties:
|
|
- compatible: "fsl,imx7ulp-iomuxc1".
|
|
- fsl,pins: Each entry consists of 5 integers which represents the mux
|
|
and config setting for one pin. The first 4 integers
|
|
<mux_conf_reg input_reg mux_mode input_val> are specified
|
|
using a PIN_FUNC_ID macro, which can be found in
|
|
imx7ulp-pinfunc.h in the device tree source folder.
|
|
The last integer CONFIG is the pad setting value like
|
|
pull-up on this pin.
|
|
|
|
Please refer to i.MX7ULP Reference Manual for detailed
|
|
CONFIG settings.
|
|
|
|
CONFIG bits definition:
|
|
PAD_CTL_OBE (1 << 17)
|
|
PAD_CTL_IBE (1 << 16)
|
|
PAD_CTL_LK (1 << 16)
|
|
PAD_CTL_DSE_HI (1 << 6)
|
|
PAD_CTL_DSE_STD (0 << 6)
|
|
PAD_CTL_ODE (1 << 5)
|
|
PAD_CTL_PUSH_PULL (0 << 5)
|
|
PAD_CTL_SRE_SLOW (1 << 2)
|
|
PAD_CTL_SRE_STD (0 << 2)
|
|
PAD_CTL_PE (1 << 0)
|
|
|
|
Examples:
|
|
#include "imx7ulp-pinfunc.h"
|
|
|
|
/* Pin Controller Node */
|
|
iomuxc1: pinctrl@40ac0000 {
|
|
compatible = "fsl,imx7ulp-iomuxc1";
|
|
reg = <0x40ac0000 0x1000>;
|
|
|
|
/* Pin Configuration Node */
|
|
pinctrl_lpuart4: lpuart4grp {
|
|
fsl,pins = <
|
|
IMX7ULP_PAD_PTC3__LPUART4_RX 0x1
|
|
IMX7ULP_PAD_PTC2__LPUART4_TX 0x1
|
|
>;
|
|
};
|
|
};
|