72 lines
2.0 KiB
Plaintext
72 lines
2.0 KiB
Plaintext
Device tree bindings for HiSilicon INNO USB2 PHY
|
|
|
|
Required properties:
|
|
- compatible: Should be one of the following strings:
|
|
"hisilicon,inno-usb2-phy",
|
|
"hisilicon,hi3798cv200-usb2-phy".
|
|
- reg: Should be the address space for PHY configuration register in peripheral
|
|
controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC.
|
|
- clocks: The phandle and clock specifier pair for INNO USB2 PHY device
|
|
reference clock.
|
|
- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset
|
|
signal.
|
|
- #address-cells: Must be 1.
|
|
- #size-cells: Must be 0.
|
|
|
|
The INNO USB2 PHY device should be a child node of peripheral controller that
|
|
contains the PHY configuration register, and each device suppports up to 2 PHY
|
|
ports which are represented as child nodes of INNO USB2 PHY device.
|
|
|
|
Required properties for PHY port node:
|
|
- reg: The PHY port instance number.
|
|
- #phy-cells: Defined by generic PHY bindings. Must be 0.
|
|
- resets: The phandle and reset specifier pair for PHY port reset signal.
|
|
|
|
Refer to phy/phy-bindings.txt for the generic PHY binding properties
|
|
|
|
Example:
|
|
|
|
perictrl: peripheral-controller@8a20000 {
|
|
compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd";
|
|
reg = <0x8a20000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x8a20000 0x1000>;
|
|
|
|
usb2_phy1: usb2-phy@120 {
|
|
compatible = "hisilicon,hi3798cv200-usb2-phy";
|
|
reg = <0x120 0x4>;
|
|
clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
|
|
resets = <&crg 0xbc 4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb2_phy1_port0: phy@0 {
|
|
reg = <0>;
|
|
#phy-cells = <0>;
|
|
resets = <&crg 0xbc 8>;
|
|
};
|
|
|
|
usb2_phy1_port1: phy@1 {
|
|
reg = <1>;
|
|
#phy-cells = <0>;
|
|
resets = <&crg 0xbc 9>;
|
|
};
|
|
};
|
|
|
|
usb2_phy2: usb2-phy@124 {
|
|
compatible = "hisilicon,hi3798cv200-usb2-phy";
|
|
reg = <0x124 0x4>;
|
|
clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
|
|
resets = <&crg 0xbc 6>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb2_phy2_port0: phy@0 {
|
|
reg = <0>;
|
|
#phy-cells = <0>;
|
|
resets = <&crg 0xbc 10>;
|
|
};
|
|
};
|
|
};
|