246 lines
9.9 KiB
Plaintext
246 lines
9.9 KiB
Plaintext
NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
|
|
|
|
This PCIe controller is based on the Synopsis Designware PCIe IP
|
|
and thus inherits all the common properties defined in snps,dw-pcie.yaml and
|
|
snps,dw-pcie-ep.yaml.
|
|
Some of the controller instances are dual mode where in they can work either
|
|
in root port mode or endpoint mode but one at a time.
|
|
|
|
Required properties:
|
|
- power-domains: A phandle to the node that controls power to the respective
|
|
PCIe controller and a specifier name for the PCIe controller. Following are
|
|
the specifiers for the different PCIe controllers
|
|
TEGRA194_POWER_DOMAIN_PCIEX8B: C0
|
|
TEGRA194_POWER_DOMAIN_PCIEX1A: C1
|
|
TEGRA194_POWER_DOMAIN_PCIEX1A: C2
|
|
TEGRA194_POWER_DOMAIN_PCIEX1A: C3
|
|
TEGRA194_POWER_DOMAIN_PCIEX4A: C4
|
|
TEGRA194_POWER_DOMAIN_PCIEX8A: C5
|
|
these specifiers are defined in
|
|
"include/dt-bindings/power/tegra194-powergate.h" file.
|
|
- reg: A list of physical base address and length pairs for each set of
|
|
controller registers. Must contain an entry for each entry in the reg-names
|
|
property.
|
|
- reg-names: Must include the following entries:
|
|
"appl": Controller's application logic registers
|
|
"config": As per the definition in snps,dw-pcie.yaml
|
|
"atu_dma": iATU and DMA registers. This is where the iATU (internal Address
|
|
Translation Unit) registers of the PCIe core are made available
|
|
for SW access.
|
|
"dbi": The aperture where root port's own configuration registers are
|
|
available
|
|
- interrupts: A list of interrupt outputs of the controller. Must contain an
|
|
entry for each entry in the interrupt-names property.
|
|
- interrupt-names: Must include the following entries:
|
|
"intr": The Tegra interrupt that is asserted for controller interrupts
|
|
- clocks: Must contain an entry for each entry in clock-names.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names: Must include the following entries:
|
|
- core
|
|
- resets: Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names: Must include the following entries:
|
|
- apb
|
|
- core
|
|
- phys: Must contain a phandle to P2U PHY for each entry in phy-names.
|
|
- phy-names: Must include an entry for each active lane.
|
|
"p2u-N": where N ranges from 0 to one less than the total number of lanes
|
|
- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed
|
|
by controller-id. Following are the controller ids for each controller.
|
|
0: C0
|
|
1: C1
|
|
2: C2
|
|
3: C3
|
|
4: C4
|
|
5: C5
|
|
- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
|
|
|
|
RC mode:
|
|
- compatible: Tegra19x must contain "nvidia,tegra194-pcie"
|
|
- device_type: Must be "pci" for RC mode
|
|
- interrupt-names: Must include the following entries:
|
|
"msi": The Tegra interrupt that is asserted when an MSI is received
|
|
- bus-range: Range of bus numbers associated with this controller
|
|
- #address-cells: Address representation for root ports (must be 3)
|
|
- cell 0 specifies the bus and device numbers of the root port:
|
|
[23:16]: bus number
|
|
[15:11]: device number
|
|
- cell 1 denotes the upper 32 address bits and should be 0
|
|
- cell 2 contains the lower 32 address bits and is used to translate to the
|
|
CPU address space
|
|
- #size-cells: Size representation for root ports (must be 2)
|
|
- ranges: Describes the translation of addresses for root ports and standard
|
|
PCI regions. The entries must be 7 cells each, where the first three cells
|
|
correspond to the address as described for the #address-cells property
|
|
above, the fourth and fifth cells are for the physical CPU address to
|
|
translate to and the sixth and seventh cells are as described for the
|
|
#size-cells property above.
|
|
- Entries setup the mapping for the standard I/O, memory and
|
|
prefetchable PCI regions. The first cell determines the type of region
|
|
that is setup:
|
|
- 0x81000000: I/O memory region
|
|
- 0x82000000: non-prefetchable memory region
|
|
- 0xc2000000: prefetchable memory region
|
|
Please refer to the standard PCI bus binding document for a more detailed
|
|
explanation.
|
|
- #interrupt-cells: Size representation for interrupts (must be 1)
|
|
- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
|
|
Please refer to the standard PCI bus binding document for a more detailed
|
|
explanation.
|
|
|
|
EP mode:
|
|
In Tegra194, Only controllers C0, C4 & C5 support EP mode.
|
|
- compatible: Tegra19x must contain "nvidia,tegra194-pcie-ep"
|
|
- reg-names: Must include the following entries:
|
|
"addr_space": Used to map remote RC address space
|
|
- reset-gpios: Must contain a phandle to a GPIO controller followed by
|
|
GPIO that is being used as PERST input signal. Please refer to pci.txt
|
|
document.
|
|
|
|
Optional properties:
|
|
- pinctrl-names: A list of pinctrl state names.
|
|
It is mandatory for C5 controller and optional for other controllers.
|
|
- "default": Configures PCIe I/O for proper operation.
|
|
- pinctrl-0: phandle for the 'default' state of pin configuration.
|
|
It is mandatory for C5 controller and optional for other controllers.
|
|
- supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt
|
|
- nvidia,update-fc-fixup: This is a boolean property and needs to be present to
|
|
improve performance when a platform is designed in such a way that it
|
|
satisfies at least one of the following conditions thereby enabling root
|
|
port to exchange optimum number of FC (Flow Control) credits with
|
|
downstream devices
|
|
1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
|
|
2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
|
|
a) speed is Gen-2 and MPS is 256B
|
|
b) speed is >= Gen-3 with any MPS
|
|
- nvidia,aspm-cmrt-us: Common Mode Restore Time for proper operation of ASPM
|
|
to be specified in microseconds
|
|
- nvidia,aspm-pwr-on-t-us: Power On time for proper operation of ASPM to be
|
|
specified in microseconds
|
|
- nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be
|
|
specified in microseconds
|
|
|
|
RC mode:
|
|
- vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot
|
|
if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
|
|
in p2972-0000 platform).
|
|
- vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot
|
|
if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
|
|
in p2972-0000 platform).
|
|
|
|
EP mode:
|
|
- nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller
|
|
followed by GPIO that is being used to enable REFCLK to controller from host
|
|
|
|
NOTE:- On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
|
|
operate in the endpoint mode because of the way the platform is designed.
|
|
|
|
Examples:
|
|
=========
|
|
|
|
Tegra194 RC mode:
|
|
-----------------
|
|
|
|
pcie@14180000 {
|
|
compatible = "nvidia,tegra194-pcie";
|
|
power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
|
|
reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */
|
|
0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */
|
|
0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K) */
|
|
reg-names = "appl", "config", "atu_dma";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
num-lanes = <8>;
|
|
linux,pci-domain = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
|
|
|
|
clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
|
|
clock-names = "core";
|
|
|
|
resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
|
|
<&bpmp TEGRA194_RESET_PEX0_CORE_0>;
|
|
reset-names = "apb", "core";
|
|
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
|
|
interrupt-names = "intr", "msi";
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
nvidia,bpmp = <&bpmp 0>;
|
|
|
|
supports-clkreq;
|
|
nvidia,aspm-cmrt-us = <60>;
|
|
nvidia,aspm-pwr-on-t-us = <20>;
|
|
nvidia,aspm-l0s-entrance-latency-us = <3>;
|
|
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */
|
|
0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01E00000 /* non-prefetchable memory (30MB) */
|
|
0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory (16GB) */
|
|
|
|
vddio-pex-ctl-supply = <&vdd_1v8ao>;
|
|
vpcie3v3-supply = <&vdd_3v3_pcie>;
|
|
vpcie12v-supply = <&vdd_12v_pcie>;
|
|
|
|
phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
|
|
<&p2u_hsio_5>;
|
|
phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
|
|
};
|
|
|
|
Tegra194 EP mode:
|
|
-----------------
|
|
|
|
pcie_ep@141a0000 {
|
|
compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
|
|
power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
|
|
reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */
|
|
0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
|
|
0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */
|
|
0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
|
|
reg-names = "appl", "atu_dma", "dbi", "addr_space";
|
|
|
|
num-lanes = <8>;
|
|
num-ib-windows = <2>;
|
|
num-ob-windows = <8>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&clkreq_c5_bi_dir_state>;
|
|
|
|
clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
|
|
clock-names = "core";
|
|
|
|
resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
|
|
<&bpmp TEGRA194_RESET_PEX1_CORE_5>;
|
|
reset-names = "apb", "core";
|
|
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
|
|
interrupt-names = "intr";
|
|
|
|
nvidia,bpmp = <&bpmp 5>;
|
|
|
|
nvidia,aspm-cmrt-us = <60>;
|
|
nvidia,aspm-pwr-on-t-us = <20>;
|
|
nvidia,aspm-l0s-entrance-latency-us = <3>;
|
|
|
|
vddio-pex-ctl-supply = <&vdd_1v8ao>;
|
|
|
|
reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
|
|
|
|
nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
|
|
GPIO_ACTIVE_HIGH>;
|
|
|
|
phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
|
|
<&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
|
|
<&p2u_nvhs_6>, <&p2u_nvhs_7>;
|
|
|
|
phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
|
|
"p2u-5", "p2u-6", "p2u-7";
|
|
};
|