93 lines
2.7 KiB
Plaintext
93 lines
2.7 KiB
Plaintext
Cortina Systems Gemini Ethernet Controller
|
|
==========================================
|
|
|
|
This ethernet controller is found in the Gemini SoC family:
|
|
StorLink SL3512 and SL3516, also known as Cortina Systems
|
|
CS3512 and CS3516.
|
|
|
|
Required properties:
|
|
- compatible: must be "cortina,gemini-ethernet"
|
|
- reg: must contain the global registers and the V-bit and A-bit
|
|
memory areas, in total three register sets.
|
|
- syscon: a phandle to the system controller
|
|
- #address-cells: must be specified, must be <1>
|
|
- #size-cells: must be specified, must be <1>
|
|
- ranges: should be state like this giving a 1:1 address translation
|
|
for the subnodes
|
|
|
|
The subnodes represents the two ethernet ports in this device.
|
|
They are not independent of each other since they share resources
|
|
in the parent node, and are thus children.
|
|
|
|
Required subnodes:
|
|
- port0: contains the resources for ethernet port 0
|
|
- port1: contains the resources for ethernet port 1
|
|
|
|
Required subnode properties:
|
|
- compatible: must be "cortina,gemini-ethernet-port"
|
|
- reg: must contain two register areas: the DMA/TOE memory and
|
|
the GMAC memory area of the port
|
|
- interrupts: should contain the interrupt line of the port.
|
|
this is nominally a level interrupt active high.
|
|
- resets: this must provide an SoC-integrated reset line for
|
|
the port.
|
|
- clocks: this should contain a handle to the PCLK clock for
|
|
clocking the silicon in this port
|
|
- clock-names: must be "PCLK"
|
|
|
|
Optional subnode properties:
|
|
- phy-mode: see ethernet.txt
|
|
- phy-handle: see ethernet.txt
|
|
|
|
Example:
|
|
|
|
mdio-bus {
|
|
(...)
|
|
phy0: ethernet-phy@1 {
|
|
reg = <1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy1: ethernet-phy@3 {
|
|
reg = <3>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
|
|
ethernet@60000000 {
|
|
compatible = "cortina,gemini-ethernet";
|
|
reg = <0x60000000 0x4000>, /* Global registers, queue */
|
|
<0x60004000 0x2000>, /* V-bit */
|
|
<0x60006000 0x2000>; /* A-bit */
|
|
syscon = <&syscon>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gmac0: ethernet-port@0 {
|
|
compatible = "cortina,gemini-ethernet-port";
|
|
reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
|
|
<0x6000a000 0x2000>; /* Port 0 GMAC */
|
|
interrupt-parent = <&intcon>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_GMAC0>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
|
|
clock-names = "PCLK";
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
gmac1: ethernet-port@1 {
|
|
compatible = "cortina,gemini-ethernet-port";
|
|
reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
|
|
<0x6000e000 0x2000>; /* Port 1 GMAC */
|
|
interrupt-parent = <&intcon>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&syscon GEMINI_RESET_GMAC1>;
|
|
clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
|
|
clock-names = "PCLK";
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy1>;
|
|
};
|
|
};
|