kernel/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
2024-07-22 17:22:30 +08:00

126 lines
2.7 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sony 1/3.06-Inch 13.13MP CMOS Digital Image Sensor
maintainers:
- Ricardo Ribalda <ribalda@kernel.org>
description: |
The Sony IMX214 is a 1/3.06-inch CMOS active pixel digital image sensor with
an active array size of 4224H x 3200V. It is programmable through an I2C
interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
maximum throughput of 1.2Gbps/lane.
allOf:
- $ref: ../video-interface-devices.yaml#
properties:
compatible:
const: sony,imx214
reg:
enum:
- 0x10
- 0x1a
clocks:
description: Reference to the xclk clock.
maxItems: 1
clock-frequency:
description: Frequency of the xclk clock in Hz.
enable-gpios:
description: GPIO descriptor for the enable pin.
maxItems: 1
vdddo-supply:
description: Chip digital IO regulator (1.8V).
vdda-supply:
description: Chip analog regulator (2.7V).
vddd-supply:
description: Chip digital core regulator (1.12V).
flash-leds: true
lens-focus: true
port:
$ref: /schemas/graph.yaml#/$defs/port-base
description: |
Video output port.
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
anyOf:
- items:
- const: 1
- const: 2
- items:
- const: 1
- const: 2
- const: 3
- const: 4
link-frequencies: true
required:
- data-lanes
- link-frequencies
additionalProperties: false
required:
- compatible
- reg
- clocks
- clock-frequency
- enable-gpios
- vdddo-supply
- vdda-supply
- vddd-supply
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
camera-sensor@1a {
compatible = "sony,imx214";
reg = <0x1a>;
vdddo-supply = <&pm8994_lvs1>;
vddd-supply = <&camera_vddd_1v12>;
vdda-supply = <&pm8994_l17>;
lens-focus = <&ad5820>;
enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
clocks = <&camera_clk>;
clock-frequency = <24000000>;
port {
imx214_ep: endpoint {
data-lanes = <1 2 3 4>;
link-frequencies = /bits/ 64 <480000000>;
remote-endpoint = <&csiphy0_ep>;
};
};
};
};
...