105 lines
3.6 KiB
YAML
105 lines
3.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Texas Instruments K3 Interrupt Router
|
|
|
|
maintainers:
|
|
- Lokesh Vutla <lokeshvutla@ti.com>
|
|
|
|
allOf:
|
|
- $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
|
|
|
|
description: |
|
|
The Interrupt Router (INTR) module provides a mechanism to mux M
|
|
interrupt inputs to N interrupt outputs, where all M inputs are selectable
|
|
to be driven per N output. An Interrupt Router can either handle edge
|
|
triggered or level triggered interrupts and that is fixed in hardware.
|
|
|
|
Interrupt Router
|
|
+----------------------+
|
|
| Inputs Outputs |
|
|
+-------+ | +------+ +-----+ |
|
|
| GPIO |----------->| | irq0 | | 0 | | Host IRQ
|
|
+-------+ | +------+ +-----+ | controller
|
|
| . . | +-------+
|
|
+-------+ | . . |----->| IRQ |
|
|
| INTA |----------->| . . | +-------+
|
|
+-------+ | . +-----+ |
|
|
| +------+ | N | |
|
|
| | irqM | +-----+ |
|
|
| +------+ |
|
|
| |
|
|
+----------------------+
|
|
|
|
There is one register per output (MUXCNTL_N) that controls the selection.
|
|
Configuration of these MUXCNTL_N registers is done by a system controller
|
|
(like the Device Memory and Security Controller on K3 AM654 SoC). System
|
|
controller will keep track of the used and unused registers within the Router.
|
|
Driver should request the system controller to get the range of GIC IRQs
|
|
assigned to the requesting hosts. It is the drivers responsibility to keep
|
|
track of Host IRQs.
|
|
|
|
Communication between the host processor running an OS and the system
|
|
controller happens through a protocol called TI System Control Interface
|
|
(TISCI protocol).
|
|
|
|
properties:
|
|
compatible:
|
|
const: ti,sci-intr
|
|
|
|
ti,intr-trigger-type:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [1, 4]
|
|
description: |
|
|
Should be one of the following.
|
|
1 = If intr supports edge triggered interrupts.
|
|
4 = If intr supports level triggered interrupts.
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
const: 1
|
|
description: |
|
|
The 1st cell should contain interrupt router input hw number.
|
|
|
|
ti,interrupt-ranges:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-matrix
|
|
description: |
|
|
Interrupt ranges that converts the INTR output hw irq numbers
|
|
to parents's input interrupt numbers.
|
|
items:
|
|
items:
|
|
- description: |
|
|
"output_irq" specifies the base for intr output irq
|
|
- description: |
|
|
"parent's input irq" specifies the base for parent irq
|
|
- description: |
|
|
"limit" specifies the limit for translation
|
|
|
|
required:
|
|
- compatible
|
|
- ti,intr-trigger-type
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
- ti,sci
|
|
- ti,sci-dev-id
|
|
- ti,interrupt-ranges
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
main_gpio_intr: interrupt-controller0 {
|
|
compatible = "ti,sci-intr";
|
|
ti,intr-trigger-type = <1>;
|
|
interrupt-controller;
|
|
interrupt-parent = <&gic500>;
|
|
#interrupt-cells = <1>;
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <131>;
|
|
ti,interrupt-ranges = <0 360 32>;
|
|
};
|