kernel/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
2024-07-22 17:22:30 +08:00

63 lines
1.5 KiB
YAML

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
description: |
The NPCM750x includes sixteen I2C bus controllers. All Controllers support
both master and slave mode. Each controller can switch between master and slave
at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
RX.
maintainers:
- Tali Perry <tali.perry1@gmail.com>
properties:
compatible:
const: nuvoton,npcm750-i2c
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
description: Reference clock for the I2C bus
clock-frequency:
description: Desired I2C bus clock frequency in Hz. If not specified,
the default 100 kHz frequency will be used.
possible values are 100000, 400000 and 1000000.
default: 100000
enum: [100000, 400000, 1000000]
required:
- compatible
- reg
- interrupts
- clocks
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
i2c0: i2c@80000 {
reg = <0x80000 0x1000>;
clocks = <&clk NPCM7XX_CLK_APB2>;
clock-frequency = <100000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
compatible = "nuvoton,npcm750-i2c";
};
...