52 lines
2.0 KiB
Plaintext
52 lines
2.0 KiB
Plaintext
MediaTek Serial ATA controller
|
|
|
|
Required properties:
|
|
- compatible : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
|
|
When using "mediatek,mtk-ahci" compatible strings, you
|
|
need SoC specific ones in addition, one of:
|
|
- "mediatek,mt7622-ahci"
|
|
- reg : Physical base addresses and length of register sets.
|
|
- interrupts : Interrupt associated with the SATA device.
|
|
- interrupt-names : Associated name must be: "hostc".
|
|
- clocks : A list of phandle and clock specifier pairs, one for each
|
|
entry in clock-names.
|
|
- clock-names : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
|
|
- phys : A phandle and PHY specifier pair for the PHY port.
|
|
- phy-names : Associated name must be: "sata-phy".
|
|
- ports-implemented : See ./ahci-platform.txt for details.
|
|
|
|
Optional properties:
|
|
- power-domains : A phandle and power domain specifier pair to the power
|
|
domain which is responsible for collapsing and restoring
|
|
power to the peripheral.
|
|
- resets : Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names : Associated names must be: "axi", "sw", "reg".
|
|
- mediatek,phy-mode : A phandle to the system controller, used to enable
|
|
SATA function.
|
|
|
|
Example:
|
|
|
|
sata: sata@1a200000 {
|
|
compatible = "mediatek,mt7622-ahci",
|
|
"mediatek,mtk-ahci";
|
|
reg = <0 0x1a200000 0 0x1100>;
|
|
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hostc";
|
|
clocks = <&pciesys CLK_SATA_AHB_EN>,
|
|
<&pciesys CLK_SATA_AXI_EN>,
|
|
<&pciesys CLK_SATA_ASIC_EN>,
|
|
<&pciesys CLK_SATA_RBC_EN>,
|
|
<&pciesys CLK_SATA_PM_EN>;
|
|
clock-names = "ahb", "axi", "asic", "rbc", "pm";
|
|
phys = <&u3port1 PHY_TYPE_SATA>;
|
|
phy-names = "sata-phy";
|
|
ports-implemented = <0x1>;
|
|
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
|
|
resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
|
|
<&pciesys MT7622_SATA_PHY_SW_RST>,
|
|
<&pciesys MT7622_SATA_PHY_REG_RST>;
|
|
reset-names = "axi", "sw", "reg";
|
|
mediatek,phy-mode = <&pciesys>;
|
|
};
|