1881 lines
90 KiB
C
1881 lines
90 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* Copyright 2017-2021 Broadcom Inc. All rights reserved.
|
|
*
|
|
*/
|
|
#ifndef MPI30_CNFG_H
|
|
#define MPI30_CNFG_H 1
|
|
#define MPI3_CONFIG_PAGETYPE_IO_UNIT (0x00)
|
|
#define MPI3_CONFIG_PAGETYPE_MANUFACTURING (0x01)
|
|
#define MPI3_CONFIG_PAGETYPE_IOC (0x02)
|
|
#define MPI3_CONFIG_PAGETYPE_UEFI_BSD (0x03)
|
|
#define MPI3_CONFIG_PAGETYPE_SECURITY (0x04)
|
|
#define MPI3_CONFIG_PAGETYPE_ENCLOSURE (0x11)
|
|
#define MPI3_CONFIG_PAGETYPE_DEVICE (0x12)
|
|
#define MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT (0x20)
|
|
#define MPI3_CONFIG_PAGETYPE_SAS_EXPANDER (0x21)
|
|
#define MPI3_CONFIG_PAGETYPE_SAS_PHY (0x23)
|
|
#define MPI3_CONFIG_PAGETYPE_SAS_PORT (0x24)
|
|
#define MPI3_CONFIG_PAGETYPE_PCIE_IO_UNIT (0x30)
|
|
#define MPI3_CONFIG_PAGETYPE_PCIE_SWITCH (0x31)
|
|
#define MPI3_CONFIG_PAGETYPE_PCIE_LINK (0x33)
|
|
#define MPI3_CONFIG_PAGEATTR_MASK (0xf0)
|
|
#define MPI3_CONFIG_PAGEATTR_READ_ONLY (0x00)
|
|
#define MPI3_CONFIG_PAGEATTR_CHANGEABLE (0x10)
|
|
#define MPI3_CONFIG_PAGEATTR_PERSISTENT (0x20)
|
|
#define MPI3_CONFIG_ACTION_PAGE_HEADER (0x00)
|
|
#define MPI3_CONFIG_ACTION_READ_DEFAULT (0x01)
|
|
#define MPI3_CONFIG_ACTION_READ_CURRENT (0x02)
|
|
#define MPI3_CONFIG_ACTION_WRITE_CURRENT (0x03)
|
|
#define MPI3_CONFIG_ACTION_READ_PERSISTENT (0x04)
|
|
#define MPI3_CONFIG_ACTION_WRITE_PERSISTENT (0x05)
|
|
#define MPI3_DEVICE_PGAD_FORM_MASK (0xf0000000)
|
|
#define MPI3_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
|
|
#define MPI3_DEVICE_PGAD_FORM_HANDLE (0x20000000)
|
|
#define MPI3_DEVICE_PGAD_HANDLE_MASK (0x0000ffff)
|
|
#define MPI3_SAS_EXPAND_PGAD_FORM_MASK (0xf0000000)
|
|
#define MPI3_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
|
|
#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM (0x10000000)
|
|
#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE (0x20000000)
|
|
#define MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00ff0000)
|
|
#define MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
|
|
#define MPI3_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000ffff)
|
|
#define MPI3_SAS_PHY_PGAD_FORM_MASK (0xf0000000)
|
|
#define MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
|
|
#define MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000ff)
|
|
#define MPI3_SASPORT_PGAD_FORM_MASK (0xf0000000)
|
|
#define MPI3_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
|
|
#define MPI3_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
|
|
#define MPI3_SASPORT_PGAD_PORT_NUMBER_MASK (0x000000ff)
|
|
#define MPI3_ENCLOS_PGAD_FORM_MASK (0xf0000000)
|
|
#define MPI3_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
|
|
#define MPI3_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
|
|
#define MPI3_ENCLOS_PGAD_HANDLE_MASK (0x0000ffff)
|
|
#define MPI3_PCIE_SWITCH_PGAD_FORM_MASK (0xf0000000)
|
|
#define MPI3_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
|
|
#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE_PORT_NUM (0x10000000)
|
|
#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE (0x20000000)
|
|
#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00ff0000)
|
|
#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16)
|
|
#define MPI3_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000ffff)
|
|
#define MPI3_PCIE_LINK_PGAD_FORM_MASK (0xf0000000)
|
|
#define MPI3_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000)
|
|
#define MPI3_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000)
|
|
#define MPI3_PCIE_LINK_PGAD_LINKNUM_MASK (0x000000ff)
|
|
#define MPI3_SECURITY_PGAD_FORM_MASK (0xf0000000)
|
|
#define MPI3_SECURITY_PGAD_FORM_GET_NEXT_SLOT (0x00000000)
|
|
#define MPI3_SECURITY_PGAD_FORM_SOT_NUM (0x10000000)
|
|
#define MPI3_SECURITY_PGAD_SLOT_GROUP_MASK (0x0000ff00)
|
|
#define MPI3_SECURITY_PGAD_SLOT_MASK (0x000000ff)
|
|
struct mpi3_config_request {
|
|
__le16 host_tag;
|
|
u8 ioc_use_only02;
|
|
u8 function;
|
|
__le16 ioc_use_only04;
|
|
u8 ioc_use_only06;
|
|
u8 msg_flags;
|
|
__le16 change_count;
|
|
__le16 reserved0a;
|
|
u8 page_version;
|
|
u8 page_number;
|
|
u8 page_type;
|
|
u8 action;
|
|
__le32 page_address;
|
|
__le16 page_length;
|
|
__le16 reserved16;
|
|
__le32 reserved18[2];
|
|
union mpi3_sge_union sgl;
|
|
};
|
|
|
|
struct mpi3_config_page_header {
|
|
u8 page_version;
|
|
u8 reserved01;
|
|
u8 page_number;
|
|
u8 page_attribute;
|
|
__le16 page_length;
|
|
u8 page_type;
|
|
u8 reserved07;
|
|
};
|
|
|
|
#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK (0xf0)
|
|
#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT (4)
|
|
#define MPI3_SAS_NEG_LINK_RATE_PHYSICAL_MASK (0x0f)
|
|
#define MPI3_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00)
|
|
#define MPI3_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01)
|
|
#define MPI3_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02)
|
|
#define MPI3_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03)
|
|
#define MPI3_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04)
|
|
#define MPI3_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05)
|
|
#define MPI3_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06)
|
|
#define MPI3_SAS_NEG_LINK_RATE_1_5 (0x08)
|
|
#define MPI3_SAS_NEG_LINK_RATE_3_0 (0x09)
|
|
#define MPI3_SAS_NEG_LINK_RATE_6_0 (0x0a)
|
|
#define MPI3_SAS_NEG_LINK_RATE_12_0 (0x0b)
|
|
#define MPI3_SAS_NEG_LINK_RATE_22_5 (0x0c)
|
|
#define MPI3_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040)
|
|
#define MPI3_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020)
|
|
#define MPI3_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010)
|
|
#define MPI3_SAS_APHYINFO_REASON_MASK (0x0000000f)
|
|
#define MPI3_SAS_APHYINFO_REASON_UNKNOWN (0x00000000)
|
|
#define MPI3_SAS_APHYINFO_REASON_POWER_ON (0x00000001)
|
|
#define MPI3_SAS_APHYINFO_REASON_HARD_RESET (0x00000002)
|
|
#define MPI3_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003)
|
|
#define MPI3_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004)
|
|
#define MPI3_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005)
|
|
#define MPI3_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006)
|
|
#define MPI3_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007)
|
|
#define MPI3_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008)
|
|
#define MPI3_SAS_APHYINFO_REASON_EXP_REDUCED_FUNC (0x00000009)
|
|
#define MPI3_SAS_PHYINFO_STATUS_MASK (0xc0000000)
|
|
#define MPI3_SAS_PHYINFO_STATUS_SHIFT (30)
|
|
#define MPI3_SAS_PHYINFO_STATUS_ACCESSIBLE (0x00000000)
|
|
#define MPI3_SAS_PHYINFO_STATUS_NOT_EXIST (0x40000000)
|
|
#define MPI3_SAS_PHYINFO_STATUS_VACANT (0x80000000)
|
|
#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
|
|
#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_ACTIVE (0x00000000)
|
|
#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_PARTIAL (0x08000000)
|
|
#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_SLUMBER (0x10000000)
|
|
#define MPI3_SAS_PHYINFO_REASON_MASK (0x000f0000)
|
|
#define MPI3_SAS_PHYINFO_REASON_UNKNOWN (0x00000000)
|
|
#define MPI3_SAS_PHYINFO_REASON_POWER_ON (0x00010000)
|
|
#define MPI3_SAS_PHYINFO_REASON_HARD_RESET (0x00020000)
|
|
#define MPI3_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000)
|
|
#define MPI3_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000)
|
|
#define MPI3_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000)
|
|
#define MPI3_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000)
|
|
#define MPI3_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000)
|
|
#define MPI3_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000)
|
|
#define MPI3_SAS_PHYINFO_REASON_EXP_REDUCED_FUNC (0x00090000)
|
|
#define MPI3_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
|
|
#define MPI3_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000)
|
|
#define MPI3_SAS_PHYINFO_VIRTUAL_PHY (0x00001000)
|
|
#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_MASK (0x00000f00)
|
|
#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_SHIFT (8)
|
|
#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_MASK (0x000000f0)
|
|
#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_DIRECT (0x00000000)
|
|
#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_SUBTRACTIVE (0x00000010)
|
|
#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_TABLE (0x00000020)
|
|
#define MPI3_SAS_PRATE_MAX_RATE_MASK (0xf0)
|
|
#define MPI3_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
|
|
#define MPI3_SAS_PRATE_MAX_RATE_1_5 (0x80)
|
|
#define MPI3_SAS_PRATE_MAX_RATE_3_0 (0x90)
|
|
#define MPI3_SAS_PRATE_MAX_RATE_6_0 (0xa0)
|
|
#define MPI3_SAS_PRATE_MAX_RATE_12_0 (0xb0)
|
|
#define MPI3_SAS_PRATE_MAX_RATE_22_5 (0xc0)
|
|
#define MPI3_SAS_PRATE_MIN_RATE_MASK (0x0f)
|
|
#define MPI3_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
|
|
#define MPI3_SAS_PRATE_MIN_RATE_1_5 (0x08)
|
|
#define MPI3_SAS_PRATE_MIN_RATE_3_0 (0x09)
|
|
#define MPI3_SAS_PRATE_MIN_RATE_6_0 (0x0a)
|
|
#define MPI3_SAS_PRATE_MIN_RATE_12_0 (0x0b)
|
|
#define MPI3_SAS_PRATE_MIN_RATE_22_5 (0x0c)
|
|
#define MPI3_SAS_HWRATE_MAX_RATE_MASK (0xf0)
|
|
#define MPI3_SAS_HWRATE_MAX_RATE_1_5 (0x80)
|
|
#define MPI3_SAS_HWRATE_MAX_RATE_3_0 (0x90)
|
|
#define MPI3_SAS_HWRATE_MAX_RATE_6_0 (0xa0)
|
|
#define MPI3_SAS_HWRATE_MAX_RATE_12_0 (0xb0)
|
|
#define MPI3_SAS_HWRATE_MAX_RATE_22_5 (0xc0)
|
|
#define MPI3_SAS_HWRATE_MIN_RATE_MASK (0x0f)
|
|
#define MPI3_SAS_HWRATE_MIN_RATE_1_5 (0x08)
|
|
#define MPI3_SAS_HWRATE_MIN_RATE_3_0 (0x09)
|
|
#define MPI3_SAS_HWRATE_MIN_RATE_6_0 (0x0a)
|
|
#define MPI3_SAS_HWRATE_MIN_RATE_12_0 (0x0b)
|
|
#define MPI3_SAS_HWRATE_MIN_RATE_22_5 (0x0c)
|
|
#define MPI3_SLOT_INVALID (0xffff)
|
|
#define MPI3_SLOT_INDEX_INVALID (0xffff)
|
|
struct mpi3_man_page0 {
|
|
struct mpi3_config_page_header header;
|
|
u8 chip_revision[8];
|
|
u8 chip_name[32];
|
|
u8 board_name[32];
|
|
u8 board_assembly[32];
|
|
u8 board_tracer_number[32];
|
|
__le32 board_power;
|
|
__le32 reserved94;
|
|
__le32 reserved98;
|
|
u8 oem;
|
|
u8 sub_oem;
|
|
__le16 reserved9e;
|
|
u8 board_mfg_day;
|
|
u8 board_mfg_month;
|
|
__le16 board_mfg_year;
|
|
u8 board_rework_day;
|
|
u8 board_rework_month;
|
|
__le16 board_rework_year;
|
|
__le64 board_revision;
|
|
u8 e_pack_fru[16];
|
|
u8 product_name[256];
|
|
};
|
|
|
|
#define MPI3_MAN0_PAGEVERSION (0x00)
|
|
#define MPI3_MAN1_VPD_SIZE (512)
|
|
struct mpi3_man_page1 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08[2];
|
|
u8 vpd[MPI3_MAN1_VPD_SIZE];
|
|
};
|
|
|
|
#define MPI3_MAN1_PAGEVERSION (0x00)
|
|
struct mpi3_man5_phy_entry {
|
|
__le64 ioc_wwid;
|
|
__le64 device_name;
|
|
__le64 sata_wwid;
|
|
};
|
|
|
|
#ifndef MPI3_MAN5_PHY_MAX
|
|
#define MPI3_MAN5_PHY_MAX (1)
|
|
#endif
|
|
struct mpi3_man_page5 {
|
|
struct mpi3_config_page_header header;
|
|
u8 num_phys;
|
|
u8 reserved09[3];
|
|
__le32 reserved0c;
|
|
struct mpi3_man5_phy_entry phy[MPI3_MAN5_PHY_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN5_PAGEVERSION (0x00)
|
|
struct mpi3_man6_gpio_entry {
|
|
u8 function_code;
|
|
u8 reserved01;
|
|
__le16 flags;
|
|
u8 param1;
|
|
u8 param2;
|
|
__le16 reserved06;
|
|
__le32 param3;
|
|
};
|
|
|
|
#define MPI3_MAN6_GPIO_FUNCTION_GENERIC (0x00)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_ALTERNATE (0x01)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_EXT_INTERRUPT (0x02)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_ACTIVITY (0x03)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_OVER_TEMPERATURE (0x04)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_GREEN (0x05)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_YELLOW (0x06)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_CABLE_MANAGEMENT (0x07)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_BKPLANE_MGMT_TYPE (0x08)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_MUX_RESET (0x09)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_RESET (0x0a)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_BACKEND_PCIE_RESET (0x0b)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_FAULT (0x0c)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ATTN (0x0d)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ONLINE (0x0e)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_EPACK_FAULT (0x0f)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_CTRL_TYPE (0x10)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_LICENSE (0x11)
|
|
#define MPI3_MAN6_GPIO_FUNCTION_REFCLK_CONTROL (0x12)
|
|
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_MASK (0xf0)
|
|
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_GENERIC (0x00)
|
|
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_CABLE_MGMT (0x10)
|
|
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_ACTIVE_CABLE_OVERCURRENT (0x20)
|
|
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_MASK (0x01)
|
|
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_EDGE (0x00)
|
|
#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_LEVEL (0x01)
|
|
#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ALL_UP (0x00)
|
|
#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ONE_OR_MORE_UP (0x01)
|
|
#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_MODULE_PRESENT (0x00)
|
|
#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_ACTIVE_CABLE_ENABLE (0x01)
|
|
#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_CABLE_MGMT_ENABLE (0x02)
|
|
#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_SPEC_MUX (0x00)
|
|
#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_ALL_MUXES (0x01)
|
|
#define MPI3_MAN6_GPIO_LICENSE_PARAM1_TYPE_IBUTTON (0x00)
|
|
#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_MASK (0x0100)
|
|
#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_FAST_EDGE (0x0100)
|
|
#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_SLOW_EDGE (0x0000)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_MASK (0x00c0)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_100OHM (0x0000)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_66OHM (0x0040)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_50OHM (0x0080)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_33OHM (0x00c0)
|
|
#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_MASK (0x0030)
|
|
#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_SHIFT (4)
|
|
#define MPI3_MAN6_GPIO_FLAGS_ACTIVE_HIGH (0x0008)
|
|
#define MPI3_MAN6_GPIO_FLAGS_BI_DIR_ENABLED (0x0004)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_MASK (0x0003)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_INPUT (0x0000)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_DRAIN_OUTPUT (0x0001)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_SOURCE_OUTPUT (0x0002)
|
|
#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_PUSH_PULL_OUTPUT (0x0003)
|
|
#ifndef MPI3_MAN6_GPIO_MAX
|
|
#define MPI3_MAN6_GPIO_MAX (1)
|
|
#endif
|
|
struct mpi3_man_page6 {
|
|
struct mpi3_config_page_header header;
|
|
__le16 flags;
|
|
__le16 reserved0a;
|
|
u8 num_gpio;
|
|
u8 reserved0d[3];
|
|
struct mpi3_man6_gpio_entry gpio[MPI3_MAN6_GPIO_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN6_PAGEVERSION (0x00)
|
|
#define MPI3_MAN6_FLAGS_HEARTBEAT_LED_DISABLED (0x0001)
|
|
struct mpi3_man7_receptacle_info {
|
|
__le32 name[4];
|
|
u8 location;
|
|
u8 connector_type;
|
|
u8 ped_clk;
|
|
u8 connector_id;
|
|
__le32 reserved14;
|
|
};
|
|
|
|
#define MPI3_MAN7_LOCATION_UNKNOWN (0x00)
|
|
#define MPI3_MAN7_LOCATION_INTERNAL (0x01)
|
|
#define MPI3_MAN7_LOCATION_EXTERNAL (0x02)
|
|
#define MPI3_MAN7_LOCATION_VIRTUAL (0x03)
|
|
#define MPI3_MAN7_PEDCLK_ROUTING_MASK (0x10)
|
|
#define MPI3_MAN7_PEDCLK_ROUTING_DIRECT (0x00)
|
|
#define MPI3_MAN7_PEDCLK_ROUTING_CLOCK_BUFFER (0x10)
|
|
#define MPI3_MAN7_PEDCLK_ID_MASK (0x0f)
|
|
#ifndef MPI3_MAN7_RECEPTACLE_INFO_MAX
|
|
#define MPI3_MAN7_RECEPTACLE_INFO_MAX (1)
|
|
#endif
|
|
struct mpi3_man_page7 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 flags;
|
|
u8 num_receptacles;
|
|
u8 reserved0d[3];
|
|
__le32 enclosure_name[4];
|
|
struct mpi3_man7_receptacle_info receptacle_info[MPI3_MAN7_RECEPTACLE_INFO_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN7_PAGEVERSION (0x00)
|
|
#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_MASK (0x01)
|
|
#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_0 (0x00)
|
|
#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_1 (0x01)
|
|
struct mpi3_man8_phy_info {
|
|
u8 receptacle_id;
|
|
u8 connector_lane;
|
|
__le16 reserved02;
|
|
__le16 slotx1;
|
|
__le16 slotx2;
|
|
__le16 slotx4;
|
|
__le16 reserved0a;
|
|
__le32 reserved0c;
|
|
};
|
|
|
|
#ifndef MPI3_MAN8_PHY_INFO_MAX
|
|
#define MPI3_MAN8_PHY_INFO_MAX (1)
|
|
#endif
|
|
struct mpi3_man_page8 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_phys;
|
|
u8 reserved0d[3];
|
|
struct mpi3_man8_phy_info phy_info[MPI3_MAN8_PHY_INFO_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN8_PAGEVERSION (0x00)
|
|
struct mpi3_man9_rsrc_entry {
|
|
__le32 maximum;
|
|
__le32 decrement;
|
|
__le32 minimum;
|
|
__le32 actual;
|
|
};
|
|
|
|
enum mpi3_man9_resources {
|
|
MPI3_MAN9_RSRC_OUTSTANDING_REQS = 0,
|
|
MPI3_MAN9_RSRC_TARGET_CMDS = 1,
|
|
MPI3_MAN9_RSRC_SAS_TARGETS = 2,
|
|
MPI3_MAN9_RSRC_PCIE_TARGETS = 3,
|
|
MPI3_MAN9_RSRC_INITIATORS = 4,
|
|
MPI3_MAN9_RSRC_VDS = 5,
|
|
MPI3_MAN9_RSRC_ENCLOSURES = 6,
|
|
MPI3_MAN9_RSRC_ENCLOSURE_PHYS = 7,
|
|
MPI3_MAN9_RSRC_EXPANDERS = 8,
|
|
MPI3_MAN9_RSRC_PCIE_SWITCHES = 9,
|
|
MPI3_MAN9_RSRC_PDS = 10,
|
|
MPI3_MAN9_RSRC_HOST_PDS = 11,
|
|
MPI3_MAN9_RSRC_ADV_HOST_PDS = 12,
|
|
MPI3_MAN9_RSRC_RAID_PDS = 13,
|
|
MPI3_MAN9_RSRC_NUM_RESOURCES
|
|
};
|
|
|
|
#define MPI3_MAN9_MIN_OUTSTANDING_REQS (1)
|
|
#define MPI3_MAN9_MAX_OUTSTANDING_REQS (65000)
|
|
#define MPI3_MAN9_MIN_TARGET_CMDS (0)
|
|
#define MPI3_MAN9_MAX_TARGET_CMDS (65535)
|
|
#define MPI3_MAN9_MIN_SAS_TARGETS (0)
|
|
#define MPI3_MAN9_MAX_SAS_TARGETS (65535)
|
|
#define MPI3_MAN9_MIN_PCIE_TARGETS (0)
|
|
#define MPI3_MAN9_MIN_INITIATORS (0)
|
|
#define MPI3_MAN9_MAX_INITIATORS (65535)
|
|
#define MPI3_MAN9_MIN_ENCLOSURES (0)
|
|
#define MPI3_MAN9_MAX_ENCLOSURES (65535)
|
|
#define MPI3_MAN9_MIN_ENCLOSURE_PHYS (0)
|
|
#define MPI3_MAN9_MIN_EXPANDERS (0)
|
|
#define MPI3_MAN9_MAX_EXPANDERS (65535)
|
|
#define MPI3_MAN9_MIN_PCIE_SWITCHES (0)
|
|
struct mpi3_man_page9 {
|
|
struct mpi3_config_page_header header;
|
|
u8 num_resources;
|
|
u8 reserved09;
|
|
__le16 reserved0a;
|
|
__le32 reserved0c;
|
|
__le32 reserved10;
|
|
__le32 reserved14;
|
|
__le32 reserved18;
|
|
__le32 reserved1c;
|
|
struct mpi3_man9_rsrc_entry resource[MPI3_MAN9_RSRC_NUM_RESOURCES];
|
|
};
|
|
|
|
#define MPI3_MAN9_PAGEVERSION (0x00)
|
|
struct mpi3_man10_istwi_ctrlr_entry {
|
|
__le16 slave_address;
|
|
__le16 flags;
|
|
__le32 reserved04;
|
|
};
|
|
|
|
#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_SLAVE_ENABLED (0x0002)
|
|
#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_MASTER_ENABLED (0x0001)
|
|
#ifndef MPI3_MAN10_ISTWI_CTRLR_MAX
|
|
#define MPI3_MAN10_ISTWI_CTRLR_MAX (1)
|
|
#endif
|
|
struct mpi3_man_page10 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_istwi_ctrl;
|
|
u8 reserved0d[3];
|
|
struct mpi3_man10_istwi_ctrlr_entry istwi_controller[MPI3_MAN10_ISTWI_CTRLR_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN10_PAGEVERSION (0x00)
|
|
struct mpi3_man11_mux_device_format {
|
|
u8 max_channel;
|
|
u8 reserved01[3];
|
|
__le32 reserved04;
|
|
};
|
|
|
|
struct mpi3_man11_temp_sensor_device_format {
|
|
u8 type;
|
|
u8 reserved01[3];
|
|
u8 temp_channel[4];
|
|
};
|
|
|
|
#define MPI3_MAN11_TEMP_SENSOR_TYPE_MAX6654 (0x00)
|
|
#define MPI3_MAN11_TEMP_SENSOR_TYPE_EMC1442 (0x01)
|
|
#define MPI3_MAN11_TEMP_SENSOR_TYPE_ADT7476 (0x02)
|
|
#define MPI3_MAN11_TEMP_SENSOR_CHANNEL_ENABLED (0x01)
|
|
struct mpi3_man11_seeprom_device_format {
|
|
u8 size;
|
|
u8 page_write_size;
|
|
__le16 reserved02;
|
|
__le32 reserved04;
|
|
};
|
|
|
|
#define MPI3_MAN11_SEEPROM_SIZE_1KBITS (0x01)
|
|
#define MPI3_MAN11_SEEPROM_SIZE_2KBITS (0x02)
|
|
#define MPI3_MAN11_SEEPROM_SIZE_4KBITS (0x03)
|
|
#define MPI3_MAN11_SEEPROM_SIZE_8KBITS (0x04)
|
|
#define MPI3_MAN11_SEEPROM_SIZE_16KBITS (0x05)
|
|
#define MPI3_MAN11_SEEPROM_SIZE_32KBITS (0x06)
|
|
#define MPI3_MAN11_SEEPROM_SIZE_64KBITS (0x07)
|
|
#define MPI3_MAN11_SEEPROM_SIZE_128KBITS (0x08)
|
|
struct mpi3_man11_ddr_spd_device_format {
|
|
u8 channel;
|
|
u8 reserved01[3];
|
|
__le32 reserved04;
|
|
};
|
|
|
|
struct mpi3_man11_cable_mgmt_device_format {
|
|
u8 type;
|
|
u8 receptacle_id;
|
|
__le16 reserved02;
|
|
__le32 reserved04;
|
|
};
|
|
|
|
#define MPI3_MAN11_CABLE_MGMT_TYPE_SFF_8636 (0x00)
|
|
struct mpi3_man11_bkplane_spec_ubm_format {
|
|
__le16 flags;
|
|
__le16 reserved02;
|
|
};
|
|
|
|
#define MPI3_MAN11_BKPLANE_UBM_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0200)
|
|
#define MPI3_MAN11_BKPLANE_UBM_FLAGS_FORCE_POLLING (0x0100)
|
|
#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_MASK (0x00f0)
|
|
#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_SHIFT (4)
|
|
#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_MASK (0x000f)
|
|
#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_SHIFT (0)
|
|
struct mpi3_man11_bkplane_spec_vpp_format {
|
|
__le16 flags;
|
|
__le16 reserved02;
|
|
};
|
|
|
|
#define MPI3_MAN11_BKPLANE_VPP_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0040)
|
|
#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_MASK (0x0030)
|
|
#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_GPIO (0x0000)
|
|
#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_REG (0x0010)
|
|
#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_MASK (0x000f)
|
|
#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_SHIFT (0)
|
|
union mpi3_man11_bkplane_spec_format {
|
|
struct mpi3_man11_bkplane_spec_ubm_format ubm;
|
|
struct mpi3_man11_bkplane_spec_vpp_format vpp;
|
|
};
|
|
|
|
struct mpi3_man11_bkplane_mgmt_device_format {
|
|
u8 type;
|
|
u8 receptacle_id;
|
|
__le16 reserved02;
|
|
union mpi3_man11_bkplane_spec_format backplane_mgmt_specific;
|
|
};
|
|
|
|
#define MPI3_MAN11_BKPLANE_MGMT_TYPE_UBM (0x00)
|
|
#define MPI3_MAN11_BKPLANE_MGMT_TYPE_VPP (0x01)
|
|
struct mpi3_man11_gas_gauge_device_format {
|
|
u8 type;
|
|
u8 reserved01[3];
|
|
__le32 reserved04;
|
|
};
|
|
|
|
#define MPI3_MAN11_GAS_GAUGE_TYPE_STANDARD (0x00)
|
|
union mpi3_man11_device_specific_format {
|
|
struct mpi3_man11_mux_device_format mux;
|
|
struct mpi3_man11_temp_sensor_device_format temp_sensor;
|
|
struct mpi3_man11_seeprom_device_format seeprom;
|
|
struct mpi3_man11_ddr_spd_device_format ddr_spd;
|
|
struct mpi3_man11_cable_mgmt_device_format cable_mgmt;
|
|
struct mpi3_man11_bkplane_mgmt_device_format bkplane_mgmt;
|
|
struct mpi3_man11_gas_gauge_device_format gas_gauge;
|
|
__le32 words[2];
|
|
};
|
|
|
|
struct mpi3_man11_istwi_device_format {
|
|
u8 device_type;
|
|
u8 controller;
|
|
u8 reserved02;
|
|
u8 flags;
|
|
__le16 device_address;
|
|
u8 mux_channel;
|
|
u8 mux_index;
|
|
union mpi3_man11_device_specific_format device_specific;
|
|
};
|
|
|
|
#define MPI3_MAN11_ISTWI_DEVTYPE_MUX (0x00)
|
|
#define MPI3_MAN11_ISTWI_DEVTYPE_TEMP_SENSOR (0x01)
|
|
#define MPI3_MAN11_ISTWI_DEVTYPE_SEEPROM (0x02)
|
|
#define MPI3_MAN11_ISTWI_DEVTYPE_DDR_SPD (0x03)
|
|
#define MPI3_MAN11_ISTWI_DEVTYPE_CABLE_MGMT (0x04)
|
|
#define MPI3_MAN11_ISTWI_DEVTYPE_BACKPLANE_MGMT (0x05)
|
|
#define MPI3_MAN11_ISTWI_DEVTYPE_GAS_GAUGE (0x06)
|
|
#define MPI3_MAN11_ISTWI_FLAGS_MUX_PRESENT (0x01)
|
|
#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_MASK (0x06)
|
|
#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_100KHZ (0x00)
|
|
#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_400KHZ (0x02)
|
|
#ifndef MPI3_MAN11_ISTWI_DEVICE_MAX
|
|
#define MPI3_MAN11_ISTWI_DEVICE_MAX (1)
|
|
#endif
|
|
struct mpi3_man_page11 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_istwi_dev;
|
|
u8 reserved0d[3];
|
|
struct mpi3_man11_istwi_device_format istwi_device[MPI3_MAN11_ISTWI_DEVICE_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN11_PAGEVERSION (0x00)
|
|
#ifndef MPI3_MAN12_NUM_SGPIO_MAX
|
|
#define MPI3_MAN12_NUM_SGPIO_MAX (1)
|
|
#endif
|
|
struct mpi3_man12_sgpio_info {
|
|
u8 slot_count;
|
|
u8 reserved01[3];
|
|
__le32 reserved04;
|
|
u8 phy_order[32];
|
|
};
|
|
|
|
struct mpi3_man_page12 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 flags;
|
|
__le32 s_clock_freq;
|
|
__le32 activity_modulation;
|
|
u8 num_sgpio;
|
|
u8 reserved15[3];
|
|
__le32 reserved18;
|
|
__le32 reserved1c;
|
|
__le32 pattern[8];
|
|
struct mpi3_man12_sgpio_info sgpio_info[MPI3_MAN12_NUM_SGPIO_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN12_PAGEVERSION (0x00)
|
|
#define MPI3_MAN12_FLAGS_ERROR_PRESENCE_ENABLED (0x0400)
|
|
#define MPI3_MAN12_FLAGS_ACTIVITY_INVERT_ENABLED (0x0200)
|
|
#define MPI3_MAN12_FLAGS_GROUP_ID_DISABLED (0x0100)
|
|
#define MPI3_MAN12_FLAGS_SIO_CLK_FILTER_ENABLED (0x0004)
|
|
#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_MASK (0x0002)
|
|
#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_PUSH_PULL (0x0000)
|
|
#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_OPEN_DRAIN (0x0002)
|
|
#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_MASK (0x0001)
|
|
#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_PUSH_PULL (0x0000)
|
|
#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_OPEN_DRAIN (0x0001)
|
|
#define MPI3_MAN12_SIO_CLK_FREQ_MIN (32)
|
|
#define MPI3_MAN12_SIO_CLK_FREQ_MAX (100000)
|
|
#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_MASK (0x0000f000)
|
|
#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_SHIFT (12)
|
|
#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_MASK (0x00000f00)
|
|
#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_SHIFT (8)
|
|
#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_MASK (0x000000f0)
|
|
#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_SHIFT (4)
|
|
#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_MASK (0x0000000f)
|
|
#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_SHIFT (0)
|
|
#define MPI3_MAN12_PATTERN_RATE_MASK (0xe0000000)
|
|
#define MPI3_MAN12_PATTERN_RATE_2_HZ (0x00000000)
|
|
#define MPI3_MAN12_PATTERN_RATE_4_HZ (0x20000000)
|
|
#define MPI3_MAN12_PATTERN_RATE_8_HZ (0x40000000)
|
|
#define MPI3_MAN12_PATTERN_RATE_16_HZ (0x60000000)
|
|
#define MPI3_MAN12_PATTERN_RATE_10_HZ (0x80000000)
|
|
#define MPI3_MAN12_PATTERN_RATE_20_HZ (0xa0000000)
|
|
#define MPI3_MAN12_PATTERN_RATE_40_HZ (0xc0000000)
|
|
#define MPI3_MAN12_PATTERN_LENGTH_MASK (0x1f000000)
|
|
#define MPI3_MAN12_PATTERN_LENGTH_SHIFT (24)
|
|
#define MPI3_MAN12_PATTERN_BIT_PATTERN_MASK (0x00ffffff)
|
|
#define MPI3_MAN12_PATTERN_BIT_PATTERN_SHIFT (0)
|
|
#ifndef MPI3_MAN13_NUM_TRANSLATION_MAX
|
|
#define MPI3_MAN13_NUM_TRANSLATION_MAX (1)
|
|
#endif
|
|
struct mpi3_man13_translation_info {
|
|
__le32 slot_status;
|
|
__le32 mask;
|
|
u8 activity;
|
|
u8 locate;
|
|
u8 error;
|
|
u8 reserved0b;
|
|
};
|
|
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_FAULT (0x20000000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_OFF (0x10000000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_ACTIVITY (0x00800000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DO_NOT_REMOVE (0x00400000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_MISSING (0x00100000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_INSERT (0x00080000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REMOVAL (0x00040000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IDENTIFY (0x00020000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_OK (0x00008000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_RESERVED_DEVICE (0x00004000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_HOT_SPARE (0x00002000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_CONSISTENCY_CHECK (0x00001000)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000800)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_FAILED_ARRAY (0x00000400)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP (0x00000200)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP_ABORT (0x00000100)
|
|
#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_PREDICTED_FAILURE (0x00000040)
|
|
#define MPI3_MAN13_BLINK_PATTERN_FORCE_OFF (0x00)
|
|
#define MPI3_MAN13_BLINK_PATTERN_FORCE_ON (0x01)
|
|
#define MPI3_MAN13_BLINK_PATTERN_PATTERN_0 (0x02)
|
|
#define MPI3_MAN13_BLINK_PATTERN_PATTERN_1 (0x03)
|
|
#define MPI3_MAN13_BLINK_PATTERN_PATTERN_2 (0x04)
|
|
#define MPI3_MAN13_BLINK_PATTERN_PATTERN_3 (0x05)
|
|
#define MPI3_MAN13_BLINK_PATTERN_PATTERN_4 (0x06)
|
|
#define MPI3_MAN13_BLINK_PATTERN_PATTERN_5 (0x07)
|
|
#define MPI3_MAN13_BLINK_PATTERN_PATTERN_6 (0x08)
|
|
#define MPI3_MAN13_BLINK_PATTERN_PATTERN_7 (0x09)
|
|
#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY (0x0a)
|
|
#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY_TRAIL (0x0b)
|
|
struct mpi3_man_page13 {
|
|
struct mpi3_config_page_header header;
|
|
u8 num_trans;
|
|
u8 reserved09[3];
|
|
__le32 reserved0c;
|
|
struct mpi3_man13_translation_info translation[MPI3_MAN13_NUM_TRANSLATION_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN13_PAGEVERSION (0x00)
|
|
struct mpi3_man_page14 {
|
|
struct mpi3_config_page_header header;
|
|
__le16 flags;
|
|
__le16 reserved0a;
|
|
u8 num_slot_groups;
|
|
u8 num_slots;
|
|
__le16 max_cert_chain_length;
|
|
__le32 sealed_slots;
|
|
};
|
|
|
|
#define MPI3_MAN14_PAGEVERSION (0x00)
|
|
#define MPI3_MAN14_FLAGS_AUTH_SESSION_REQ (0x01)
|
|
#define MPI3_MAN14_FLAGS_AUTH_API_MASK (0x0e)
|
|
#define MPI3_MAN14_FLAGS_AUTH_API_NONE (0x00)
|
|
#define MPI3_MAN14_FLAGS_AUTH_API_CEREBUS (0x02)
|
|
#define MPI3_MAN14_FLAGS_AUTH_API_DMTF_PMCI (0x04)
|
|
#ifndef MPI3_MAN15_VERSION_RECORD_MAX
|
|
#define MPI3_MAN15_VERSION_RECORD_MAX 1
|
|
#endif
|
|
struct mpi3_man15_version_record {
|
|
__le16 spdm_version;
|
|
__le16 reserved02;
|
|
};
|
|
|
|
struct mpi3_man_page15 {
|
|
struct mpi3_config_page_header header;
|
|
u8 num_version_records;
|
|
u8 reserved09[3];
|
|
__le32 reserved0c;
|
|
struct mpi3_man15_version_record version_record[MPI3_MAN15_VERSION_RECORD_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN15_PAGEVERSION (0x00)
|
|
#ifndef MPI3_MAN16_CERT_ALGO_MAX
|
|
#define MPI3_MAN16_CERT_ALGO_MAX 1
|
|
#endif
|
|
struct mpi3_man16_certificate_algorithm {
|
|
u8 slot_group;
|
|
u8 reserved01[3];
|
|
__le32 base_asym_algo;
|
|
__le32 base_hash_algo;
|
|
__le32 reserved0c[3];
|
|
};
|
|
|
|
struct mpi3_man_page16 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_cert_algos;
|
|
u8 reserved0d[3];
|
|
struct mpi3_man16_certificate_algorithm certificate_algorithm[MPI3_MAN16_CERT_ALGO_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN16_PAGEVERSION (0x00)
|
|
#ifndef MPI3_MAN17_HASH_ALGORITHM_MAX
|
|
#define MPI3_MAN17_HASH_ALGORITHM_MAX 1
|
|
#endif
|
|
struct mpi3_man17_hash_algorithm {
|
|
u8 meas_specification;
|
|
u8 reserved01[3];
|
|
__le32 measurement_hash_algo;
|
|
__le32 reserved08[2];
|
|
};
|
|
|
|
struct mpi3_man_page17 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_hash_algos;
|
|
u8 reserved0d[3];
|
|
struct mpi3_man17_hash_algorithm hash_algorithm[MPI3_MAN17_HASH_ALGORITHM_MAX];
|
|
};
|
|
|
|
#define MPI3_MAN17_PAGEVERSION (0x00)
|
|
struct mpi3_man_page20 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
__le32 nonpremium_features;
|
|
u8 allowed_personalities;
|
|
u8 reserved11[3];
|
|
};
|
|
|
|
#define MPI3_MAN20_PAGEVERSION (0x00)
|
|
#define MPI3_MAN20_ALLOWEDPERSON_RAID_MASK (0x02)
|
|
#define MPI3_MAN20_ALLOWEDPERSON_RAID_ALLOWED (0x02)
|
|
#define MPI3_MAN20_ALLOWEDPERSON_RAID_NOT_ALLOWED (0x00)
|
|
#define MPI3_MAN20_ALLOWEDPERSON_EHBA_MASK (0x01)
|
|
#define MPI3_MAN20_ALLOWEDPERSON_EHBA_ALLOWED (0x01)
|
|
#define MPI3_MAN20_ALLOWEDPERSON_EHBA_NOT_ALLOWED (0x00)
|
|
#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_MASK (0x01)
|
|
#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_ENABLED (0x00)
|
|
#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_DISABLED (0x01)
|
|
struct mpi3_man_page21 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
__le32 flags;
|
|
};
|
|
|
|
#define MPI3_MAN21_PAGEVERSION (0x00)
|
|
#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_MASK (0x80)
|
|
#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_ENABLED (0x80)
|
|
#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_DISABLED (0x00)
|
|
#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_MASK (0x60)
|
|
#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_BLOCK (0x00)
|
|
#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_ALLOW (0x20)
|
|
#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_WARN (0x40)
|
|
#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_MASK (0x08)
|
|
#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_ALLOW (0x00)
|
|
#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_PREVENT (0x08)
|
|
#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_MASK (0x01)
|
|
#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_DEFAULT (0x00)
|
|
#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_OEM_SPECIFIC (0x01)
|
|
#ifndef MPI3_MAN_PROD_SPECIFIC_MAX
|
|
#define MPI3_MAN_PROD_SPECIFIC_MAX (1)
|
|
#endif
|
|
struct mpi3_man_page_product_specific {
|
|
struct mpi3_config_page_header header;
|
|
__le32 product_specific_info[MPI3_MAN_PROD_SPECIFIC_MAX];
|
|
};
|
|
|
|
struct mpi3_io_unit_page0 {
|
|
struct mpi3_config_page_header header;
|
|
__le64 unique_value;
|
|
__le32 nvdata_version_default;
|
|
__le32 nvdata_version_persistent;
|
|
};
|
|
|
|
#define MPI3_IOUNIT0_PAGEVERSION (0x00)
|
|
struct mpi3_io_unit_page1 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 flags;
|
|
u8 dmd_io_delay;
|
|
u8 dmd_report_pc_ie;
|
|
u8 dmd_report_sata;
|
|
u8 dmd_report_sas;
|
|
};
|
|
|
|
#define MPI3_IOUNIT1_PAGEVERSION (0x00)
|
|
#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_MASK (0x00000030)
|
|
#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_ENABLE (0x00000000)
|
|
#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_DISABLE (0x00000010)
|
|
#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_NO_MODIFY (0x00000020)
|
|
#define MPI3_IOUNIT1_FLAGS_ATA_SECURITY_FREEZE_LOCK (0x00000008)
|
|
#define MPI3_IOUNIT1_FLAGS_WRITE_SAME_BUFFER (0x00000004)
|
|
#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_MASK (0x00000003)
|
|
#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_ENABLE (0x00000000)
|
|
#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_DISABLE (0x00000001)
|
|
#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_UNCHANGED (0x00000002)
|
|
#define MPI3_IOUNIT1_DMD_REPORT_DELAY_TIME_MASK (0x7f)
|
|
#define MPI3_IOUNIT1_DMD_REPORT_UNIT_16_SEC (0x80)
|
|
#ifndef MPI3_IO_UNIT2_GPIO_VAL_MAX
|
|
#define MPI3_IO_UNIT2_GPIO_VAL_MAX (1)
|
|
#endif
|
|
struct mpi3_io_unit_page2 {
|
|
struct mpi3_config_page_header header;
|
|
u8 gpio_count;
|
|
u8 reserved09[3];
|
|
__le16 gpio_val[MPI3_IO_UNIT2_GPIO_VAL_MAX];
|
|
};
|
|
|
|
#define MPI3_IOUNIT2_PAGEVERSION (0x00)
|
|
#define MPI3_IOUNIT2_GPIO_FUNCTION_MASK (0xfffc)
|
|
#define MPI3_IOUNIT2_GPIO_FUNCTION_SHIFT (2)
|
|
#define MPI3_IOUNIT2_GPIO_SETTING_MASK (0x0001)
|
|
#define MPI3_IOUNIT2_GPIO_SETTING_OFF (0x0000)
|
|
#define MPI3_IOUNIT2_GPIO_SETTING_ON (0x0001)
|
|
struct mpi3_io_unit3_sensor {
|
|
__le16 flags;
|
|
__le16 reserved02;
|
|
__le16 threshold[4];
|
|
__le32 reserved0c;
|
|
__le32 reserved10;
|
|
__le32 reserved14;
|
|
};
|
|
|
|
#define MPI3_IOUNIT3_SENSOR_FLAGS_T3_ENABLE (0x0008)
|
|
#define MPI3_IOUNIT3_SENSOR_FLAGS_T2_ENABLE (0x0004)
|
|
#define MPI3_IOUNIT3_SENSOR_FLAGS_T1_ENABLE (0x0002)
|
|
#define MPI3_IOUNIT3_SENSOR_FLAGS_T0_ENABLE (0x0001)
|
|
#ifndef MPI3_IO_UNIT3_SENSOR_MAX
|
|
#define MPI3_IO_UNIT3_SENSOR_MAX (1)
|
|
#endif
|
|
struct mpi3_io_unit_page3 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_sensors;
|
|
u8 polling_interval;
|
|
__le16 reserved0e;
|
|
struct mpi3_io_unit3_sensor sensor[MPI3_IO_UNIT3_SENSOR_MAX];
|
|
};
|
|
|
|
#define MPI3_IOUNIT3_PAGEVERSION (0x00)
|
|
struct mpi3_io_unit4_sensor {
|
|
__le16 current_temperature;
|
|
__le16 reserved02;
|
|
u8 flags;
|
|
u8 reserved05[3];
|
|
__le32 reserved08;
|
|
__le32 reserved0c;
|
|
};
|
|
|
|
#define MPI3_IOUNIT4_SENSOR_FLAGS_TEMP_VALID (0x01)
|
|
#ifndef MPI3_IO_UNIT4_SENSOR_MAX
|
|
#define MPI3_IO_UNIT4_SENSOR_MAX (1)
|
|
#endif
|
|
struct mpi3_io_unit_page4 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_sensors;
|
|
u8 reserved0d[3];
|
|
struct mpi3_io_unit4_sensor sensor[MPI3_IO_UNIT4_SENSOR_MAX];
|
|
};
|
|
|
|
#define MPI3_IOUNIT4_PAGEVERSION (0x00)
|
|
struct mpi3_io_unit5_spinup_group {
|
|
u8 max_target_spinup;
|
|
u8 spinup_delay;
|
|
u8 spinup_flags;
|
|
u8 reserved03;
|
|
};
|
|
|
|
#define MPI3_IOUNIT5_SPINUP_FLAGS_DISABLE (0x01)
|
|
#ifndef MPI3_IO_UNIT5_PHY_MAX
|
|
#define MPI3_IO_UNIT5_PHY_MAX (4)
|
|
#endif
|
|
struct mpi3_io_unit_page5 {
|
|
struct mpi3_config_page_header header;
|
|
struct mpi3_io_unit5_spinup_group spinup_group_parameters[4];
|
|
__le32 reserved18;
|
|
__le32 reserved1c;
|
|
__le32 reserved20;
|
|
u8 reserved24;
|
|
u8 sata_device_wait_time;
|
|
u8 spinup_encl_drive_count;
|
|
u8 spinup_encl_delay;
|
|
u8 num_phys;
|
|
u8 pe_initial_spinup_delay;
|
|
u8 topology_stable_time;
|
|
u8 flags;
|
|
u8 phy[MPI3_IO_UNIT5_PHY_MAX];
|
|
};
|
|
|
|
#define MPI3_IOUNIT5_PAGEVERSION (0x00)
|
|
#define MPI3_IOUNIT5_FLAGS_POWER_CAPABLE_SPINUP (0x02)
|
|
#define MPI3_IOUNIT5_FLAGS_AUTO_PORT_ENABLE (0x01)
|
|
#define MPI3_IOUNIT5_PHY_SPINUP_GROUP_MASK (0x03)
|
|
struct mpi3_io_unit_page6 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 board_power_requirement;
|
|
__le32 pci_slot_power_allocation;
|
|
u8 flags;
|
|
u8 reserved11[3];
|
|
};
|
|
|
|
#define MPI3_IOUNIT6_PAGEVERSION (0x00)
|
|
#define MPI3_IOUNIT6_FLAGS_ACT_CABLE_PWR_EXC (0x01)
|
|
struct mpi3_io_unit_page7 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
};
|
|
|
|
#define MPI3_IOUNIT7_PAGEVERSION (0x00)
|
|
#ifndef MPI3_IOUNIT8_DIGEST_MAX
|
|
#define MPI3_IOUNIT8_DIGEST_MAX (1)
|
|
#endif
|
|
union mpi3_iounit8_digest {
|
|
__le32 dword[16];
|
|
__le16 word[32];
|
|
u8 byte[64];
|
|
};
|
|
|
|
struct mpi3_io_unit_page8 {
|
|
struct mpi3_config_page_header header;
|
|
u8 sb_mode;
|
|
u8 sb_state;
|
|
__le16 reserved0a;
|
|
u8 num_slots;
|
|
u8 slots_available;
|
|
u8 current_key_encryption_algo;
|
|
u8 key_digest_hash_algo;
|
|
__le32 reserved10[2];
|
|
__le32 current_key[128];
|
|
union mpi3_iounit8_digest digest[MPI3_IOUNIT8_DIGEST_MAX];
|
|
};
|
|
|
|
#define MPI3_IOUNIT8_PAGEVERSION (0x00)
|
|
#define MPI3_IOUNIT8_SBMODE_SECURE_DEBUG (0x04)
|
|
#define MPI3_IOUNIT8_SBMODE_HARD_SECURE (0x02)
|
|
#define MPI3_IOUNIT8_SBMODE_CONFIG_SECURE (0x01)
|
|
#define MPI3_IOUNIT8_SBSTATE_KEY_UPDATE_PENDING (0x02)
|
|
#define MPI3_IOUNIT8_SBSTATE_SECURE_BOOT_ENABLED (0x01)
|
|
struct mpi3_io_unit_page9 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 flags;
|
|
__le16 first_device;
|
|
__le16 reserved0e;
|
|
};
|
|
|
|
#define MPI3_IOUNIT9_PAGEVERSION (0x00)
|
|
#define MPI3_IOUNIT9_FLAGS_VDFIRST_ENABLED (0x01)
|
|
#define MPI3_IOUNIT9_FIRSTDEVICE_UNKNOWN (0xffff)
|
|
struct mpi3_ioc_page0 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
__le16 vendor_id;
|
|
__le16 device_id;
|
|
u8 revision_id;
|
|
u8 reserved11[3];
|
|
__le32 class_code;
|
|
__le16 subsystem_vendor_id;
|
|
__le16 subsystem_id;
|
|
};
|
|
|
|
#define MPI3_IOC0_PAGEVERSION (0x00)
|
|
struct mpi3_ioc_page1 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 coalescing_timeout;
|
|
u8 coalescing_depth;
|
|
u8 pci_slot_num;
|
|
__le16 reserved0e;
|
|
};
|
|
|
|
#define MPI3_IOC1_PAGEVERSION (0x00)
|
|
#define MPI3_IOC1_PCISLOTNUM_UNKNOWN (0xff)
|
|
#ifndef MPI3_IOC2_EVENTMASK_WORDS
|
|
#define MPI3_IOC2_EVENTMASK_WORDS (4)
|
|
#endif
|
|
struct mpi3_ioc_page2 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
__le16 sas_broadcast_primitive_masks;
|
|
__le16 sas_notify_primitive_masks;
|
|
__le32 event_masks[MPI3_IOC2_EVENTMASK_WORDS];
|
|
};
|
|
|
|
#define MPI3_IOC2_PAGEVERSION (0x00)
|
|
struct mpi3_uefibsd_page0 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 bsd_options;
|
|
u8 ssu_timeout;
|
|
u8 io_timeout;
|
|
u8 tur_retries;
|
|
u8 tur_interval;
|
|
u8 reserved10;
|
|
u8 security_key_timeout;
|
|
__le16 reserved12;
|
|
__le32 reserved14;
|
|
__le32 reserved18;
|
|
};
|
|
|
|
#define MPI3_UEFIBSD_PAGEVERSION (0x00)
|
|
#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_MASK (0x00000003)
|
|
#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_AND_DEVS (0x00000000)
|
|
#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_ONLY (0x00000001)
|
|
#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_NONE (0x00000002)
|
|
#define MPI3_UEFIBSD_BSDOPTS_DIS_HII_CONFIG_UTIL (0x00000004)
|
|
#define MPI3_UEFIBSD_BSDOPTS_EN_ADV_ADAPTER_CONFIG (0x00000008)
|
|
union mpi3_security_mac {
|
|
__le32 dword[16];
|
|
__le16 word[32];
|
|
u8 byte[64];
|
|
};
|
|
|
|
union mpi3_security_nonce {
|
|
__le32 dword[16];
|
|
__le16 word[32];
|
|
u8 byte[64];
|
|
};
|
|
|
|
union mpi3_security0_cert_chain {
|
|
__le32 dword[1024];
|
|
__le16 word[2048];
|
|
u8 byte[4096];
|
|
};
|
|
|
|
struct mpi3_security_page0 {
|
|
struct mpi3_config_page_header header;
|
|
u8 slot_num_group;
|
|
u8 slot_num;
|
|
__le16 cert_chain_length;
|
|
u8 cert_chain_flags;
|
|
u8 reserved0d[3];
|
|
__le32 base_asym_algo;
|
|
__le32 base_hash_algo;
|
|
__le32 reserved18[4];
|
|
union mpi3_security_mac mac;
|
|
union mpi3_security_nonce nonce;
|
|
union mpi3_security0_cert_chain certificate_chain;
|
|
};
|
|
|
|
#define MPI3_SECURITY0_PAGEVERSION (0x00)
|
|
#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_MASK (0x0e)
|
|
#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_UNUSED (0x00)
|
|
#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_CERBERUS (0x02)
|
|
#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_SPDM (0x04)
|
|
#define MPI3_SECURITY0_CERTCHAIN_FLAGS_SEALED (0x01)
|
|
#ifndef MPI3_SECURITY1_KEY_RECORD_MAX
|
|
#define MPI3_SECURITY1_KEY_RECORD_MAX 1
|
|
#endif
|
|
#ifndef MPI3_SECURITY1_PAD_MAX
|
|
#define MPI3_SECURITY1_PAD_MAX 1
|
|
#endif
|
|
union mpi3_security1_key_data {
|
|
__le32 dword[128];
|
|
__le16 word[256];
|
|
u8 byte[512];
|
|
};
|
|
|
|
struct mpi3_security1_key_record {
|
|
u8 flags;
|
|
u8 consumer;
|
|
__le16 key_data_size;
|
|
__le32 additional_key_data;
|
|
__le32 reserved08[2];
|
|
union mpi3_security1_key_data key_data;
|
|
};
|
|
|
|
#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_MASK (0x1f)
|
|
#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_NOT_VALID (0x00)
|
|
#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_HMAC (0x01)
|
|
#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_AES (0x02)
|
|
#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PRIVATE (0x03)
|
|
#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PUBLIC (0x04)
|
|
#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_NOT_VALID (0x00)
|
|
#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_SAFESTORE (0x01)
|
|
#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CERT_CHAIN (0x02)
|
|
#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_AUTH_DEV_KEY (0x03)
|
|
#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CACHE_OFFLOAD (0x04)
|
|
struct mpi3_security_page1 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08[2];
|
|
union mpi3_security_mac mac;
|
|
union mpi3_security_nonce nonce;
|
|
u8 num_keys;
|
|
u8 reserved91[3];
|
|
__le32 reserved94[3];
|
|
struct mpi3_security1_key_record key_record[MPI3_SECURITY1_KEY_RECORD_MAX];
|
|
u8 pad[MPI3_SECURITY1_PAD_MAX];
|
|
};
|
|
|
|
#define MPI3_SECURITY1_PAGEVERSION (0x00)
|
|
struct mpi3_sas_io_unit0_phy_data {
|
|
u8 io_unit_port;
|
|
u8 port_flags;
|
|
u8 phy_flags;
|
|
u8 negotiated_link_rate;
|
|
__le16 controller_phy_device_info;
|
|
__le16 reserved06;
|
|
__le16 attached_dev_handle;
|
|
__le16 controller_dev_handle;
|
|
__le32 discovery_status;
|
|
__le32 reserved10;
|
|
};
|
|
|
|
#ifndef MPI3_SAS_IO_UNIT0_PHY_MAX
|
|
#define MPI3_SAS_IO_UNIT0_PHY_MAX (1)
|
|
#endif
|
|
struct mpi3_sas_io_unit_page0 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_phys;
|
|
u8 reserved0d[3];
|
|
struct mpi3_sas_io_unit0_phy_data phy_data[MPI3_SAS_IO_UNIT0_PHY_MAX];
|
|
};
|
|
|
|
#define MPI3_SASIOUNIT0_PAGEVERSION (0x00)
|
|
#define MPI3_SASIOUNIT0_PORTFLAGS_DISC_IN_PROGRESS (0x08)
|
|
#define MPI3_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
|
|
#define MPI3_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
|
|
#define MPI3_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
|
|
#define MPI3_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
|
|
struct mpi3_sas_io_unit1_phy_data {
|
|
u8 io_unit_port;
|
|
u8 port_flags;
|
|
u8 phy_flags;
|
|
u8 max_min_link_rate;
|
|
__le16 controller_phy_device_info;
|
|
__le16 max_target_port_connect_time;
|
|
__le32 reserved08;
|
|
};
|
|
|
|
#ifndef MPI3_SAS_IO_UNIT1_PHY_MAX
|
|
#define MPI3_SAS_IO_UNIT1_PHY_MAX (1)
|
|
#endif
|
|
struct mpi3_sas_io_unit_page1 {
|
|
struct mpi3_config_page_header header;
|
|
__le16 control_flags;
|
|
__le16 sas_narrow_max_queue_depth;
|
|
__le16 additional_control_flags;
|
|
__le16 sas_wide_max_queue_depth;
|
|
u8 num_phys;
|
|
u8 sata_max_q_depth;
|
|
__le16 reserved12;
|
|
struct mpi3_sas_io_unit1_phy_data phy_data[MPI3_SAS_IO_UNIT1_PHY_MAX];
|
|
};
|
|
|
|
#define MPI3_SASIOUNIT1_PAGEVERSION (0x00)
|
|
#define MPI3_SASIOUNIT1_CONTROL_CONTROLLER_DEVICE_SELF_TEST (0x8000)
|
|
#define MPI3_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
|
|
#define MPI3_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
|
|
#define MPI3_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
|
|
#define MPI3_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
|
|
#define MPI3_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
|
|
#define MPI3_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008)
|
|
#define MPI3_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
|
|
#define MPI3_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
|
|
#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_MASK (0x0001)
|
|
#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_DEVICE_NAME (0x0000)
|
|
#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_SAS_ADDRESS (0x0001)
|
|
#define MPI3_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100)
|
|
#define MPI3_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
|
|
#define MPI3_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
|
|
#define MPI3_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
|
|
#define MPI3_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
|
|
#define MPI3_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
|
|
#define MPI3_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
|
|
#define MPI3_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
|
|
#define MPI3_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
|
|
#define MPI3_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
|
|
#define MPI3_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
|
|
#define MPI3_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
|
|
#define MPI3_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
|
|
#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_MASK (0xf0)
|
|
#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_SHIFT (4)
|
|
#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_6_0 (0xa0)
|
|
#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_12_0 (0xb0)
|
|
#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_22_5 (0xc0)
|
|
#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_MASK (0x0f)
|
|
#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_6_0 (0x0a)
|
|
#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_12_0 (0x0b)
|
|
#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_22_5 (0x0c)
|
|
struct mpi3_sas_io_unit2_phy_pm_settings {
|
|
u8 control_flags;
|
|
u8 reserved01;
|
|
__le16 inactivity_timer_exponent;
|
|
u8 sata_partial_timeout;
|
|
u8 reserved05;
|
|
u8 sata_slumber_timeout;
|
|
u8 reserved07;
|
|
u8 sas_partial_timeout;
|
|
u8 reserved09;
|
|
u8 sas_slumber_timeout;
|
|
u8 reserved0b;
|
|
};
|
|
|
|
#ifndef MPI3_SAS_IO_UNIT2_PHY_MAX
|
|
#define MPI3_SAS_IO_UNIT2_PHY_MAX (1)
|
|
#endif
|
|
struct mpi3_sas_io_unit_page2 {
|
|
struct mpi3_config_page_header header;
|
|
u8 num_phys;
|
|
u8 reserved09[3];
|
|
__le32 reserved0c;
|
|
struct mpi3_sas_io_unit2_phy_pm_settings sas_phy_power_management_settings[MPI3_SAS_IO_UNIT2_PHY_MAX];
|
|
};
|
|
|
|
#define MPI3_SASIOUNIT2_PAGEVERSION (0x00)
|
|
#define MPI3_SASIOUNIT2_CONTROL_SAS_SLUMBER_ENABLE (0x08)
|
|
#define MPI3_SASIOUNIT2_CONTROL_SAS_PARTIAL_ENABLE (0x04)
|
|
#define MPI3_SASIOUNIT2_CONTROL_SATA_SLUMBER_ENABLE (0x02)
|
|
#define MPI3_SASIOUNIT2_CONTROL_SATA_PARTIAL_ENABLE (0x01)
|
|
#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_MASK (0x7000)
|
|
#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_SHIFT (12)
|
|
#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_MASK (0x0700)
|
|
#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_SHIFT (8)
|
|
#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_MASK (0x0070)
|
|
#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_SHIFT (4)
|
|
#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_MASK (0x0007)
|
|
#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_SHIFT (0)
|
|
#define MPI3_SASIOUNIT2_ITE_EXP_TEN_SECONDS (7)
|
|
#define MPI3_SASIOUNIT2_ITE_EXP_ONE_SECOND (6)
|
|
#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MILLISECONDS (5)
|
|
#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MILLISECONDS (4)
|
|
#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MILLISECOND (3)
|
|
#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MICROSECONDS (2)
|
|
#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MICROSECONDS (1)
|
|
#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MICROSECOND (0)
|
|
struct mpi3_sas_io_unit_page3 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
__le32 power_management_capabilities;
|
|
};
|
|
|
|
#define MPI3_SASIOUNIT3_PAGEVERSION (0x00)
|
|
#define MPI3_SASIOUNIT3_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
|
|
#define MPI3_SASIOUNIT3_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
|
|
#define MPI3_SASIOUNIT3_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
|
|
#define MPI3_SASIOUNIT3_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
|
|
#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
|
|
#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
|
|
#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
|
|
#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
|
|
struct mpi3_sas_expander_page0 {
|
|
struct mpi3_config_page_header header;
|
|
u8 io_unit_port;
|
|
u8 report_gen_length;
|
|
__le16 enclosure_handle;
|
|
__le32 reserved0c;
|
|
__le64 sas_address;
|
|
__le32 discovery_status;
|
|
__le16 dev_handle;
|
|
__le16 parent_dev_handle;
|
|
__le16 expander_change_count;
|
|
__le16 expander_route_indexes;
|
|
u8 num_phys;
|
|
u8 sas_level;
|
|
__le16 flags;
|
|
__le16 stp_bus_inactivity_time_limit;
|
|
__le16 stp_max_connect_time_limit;
|
|
__le16 stp_smp_nexus_loss_time;
|
|
__le16 max_num_routed_sas_addresses;
|
|
__le64 active_zone_manager_sas_address;
|
|
__le16 zone_lock_inactivity_limit;
|
|
__le16 reserved3a;
|
|
u8 time_to_reduced_func;
|
|
u8 initial_time_to_reduced_func;
|
|
u8 max_reduced_func_time;
|
|
u8 exp_status;
|
|
};
|
|
|
|
#define MPI3_SASEXPANDER0_PAGEVERSION (0x00)
|
|
#define MPI3_SASEXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
|
|
#define MPI3_SASEXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
|
|
#define MPI3_SASEXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
|
|
#define MPI3_SASEXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
|
|
#define MPI3_SASEXPANDER0_FLAGS_ZONING_SUPPORT (0x0200)
|
|
#define MPI3_SASEXPANDER0_FLAGS_ENABLED_ZONING (0x0100)
|
|
#define MPI3_SASEXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080)
|
|
#define MPI3_SASEXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010)
|
|
#define MPI3_SASEXPANDER0_FLAGS_OTHERS_CONFIG (0x0004)
|
|
#define MPI3_SASEXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002)
|
|
#define MPI3_SASEXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001)
|
|
#define MPI3_SASEXPANDER0_ES_NOT_RESPONDING (0x02)
|
|
#define MPI3_SASEXPANDER0_ES_RESPONDING (0x03)
|
|
#define MPI3_SASEXPANDER0_ES_DELAY_NOT_RESPONDING (0x04)
|
|
struct mpi3_sas_expander_page1 {
|
|
struct mpi3_config_page_header header;
|
|
u8 io_unit_port;
|
|
u8 reserved09[3];
|
|
u8 num_phys;
|
|
u8 phy;
|
|
__le16 num_table_entries_programmed;
|
|
u8 programmed_link_rate;
|
|
u8 hw_link_rate;
|
|
__le16 attached_dev_handle;
|
|
__le32 phy_info;
|
|
__le16 attached_device_info;
|
|
__le16 reserved1a;
|
|
__le16 expander_dev_handle;
|
|
u8 change_count;
|
|
u8 negotiated_link_rate;
|
|
u8 phy_identifier;
|
|
u8 attached_phy_identifier;
|
|
u8 reserved22;
|
|
u8 discovery_info;
|
|
__le32 attached_phy_info;
|
|
u8 zone_group;
|
|
u8 self_config_status;
|
|
__le16 reserved2a;
|
|
__le16 slot;
|
|
__le16 slot_index;
|
|
};
|
|
|
|
#define MPI3_SASEXPANDER1_PAGEVERSION (0x00)
|
|
#define MPI3_SASEXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
|
|
#define MPI3_SASEXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
|
|
#define MPI3_SASEXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
|
|
struct mpi3_sas_port_page0 {
|
|
struct mpi3_config_page_header header;
|
|
u8 port_number;
|
|
u8 reserved09;
|
|
u8 port_width;
|
|
u8 reserved0b;
|
|
u8 zone_group;
|
|
u8 reserved0d[3];
|
|
__le64 sas_address;
|
|
__le16 device_info;
|
|
__le16 reserved1a;
|
|
__le32 reserved1c;
|
|
};
|
|
|
|
#define MPI3_SASPORT0_PAGEVERSION (0x00)
|
|
struct mpi3_sas_phy_page0 {
|
|
struct mpi3_config_page_header header;
|
|
__le16 owner_dev_handle;
|
|
__le16 reserved0a;
|
|
__le16 attached_dev_handle;
|
|
u8 attached_phy_identifier;
|
|
u8 reserved0f;
|
|
__le32 attached_phy_info;
|
|
u8 programmed_link_rate;
|
|
u8 hw_link_rate;
|
|
u8 change_count;
|
|
u8 flags;
|
|
__le32 phy_info;
|
|
u8 negotiated_link_rate;
|
|
u8 reserved1d[3];
|
|
__le16 slot;
|
|
__le16 slot_index;
|
|
};
|
|
|
|
#define MPI3_SASPHY0_PAGEVERSION (0x00)
|
|
#define MPI3_SASPHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
|
|
struct mpi3_sas_phy_page1 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
__le32 invalid_dword_count;
|
|
__le32 running_disparity_error_count;
|
|
__le32 loss_dword_synch_count;
|
|
__le32 phy_reset_problem_count;
|
|
};
|
|
|
|
#define MPI3_SASPHY1_PAGEVERSION (0x00)
|
|
struct mpi3_sas_phy2_phy_event {
|
|
u8 phy_event_code;
|
|
u8 reserved01[3];
|
|
__le32 phy_event_info;
|
|
};
|
|
|
|
#ifndef MPI3_SAS_PHY2_PHY_EVENT_MAX
|
|
#define MPI3_SAS_PHY2_PHY_EVENT_MAX (1)
|
|
#endif
|
|
struct mpi3_sas_phy_page2 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_phy_events;
|
|
u8 reserved0d[3];
|
|
struct mpi3_sas_phy2_phy_event phy_event[MPI3_SAS_PHY2_PHY_EVENT_MAX];
|
|
};
|
|
|
|
#define MPI3_SASPHY2_PAGEVERSION (0x00)
|
|
struct mpi3_sas_phy3_phy_event_config {
|
|
u8 phy_event_code;
|
|
u8 reserved01[3];
|
|
u8 counter_type;
|
|
u8 threshold_window;
|
|
u8 time_units;
|
|
u8 reserved07;
|
|
__le32 event_threshold;
|
|
__le16 threshold_flags;
|
|
__le16 reserved0e;
|
|
};
|
|
|
|
#define MPI3_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
|
|
#define MPI3_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
|
|
#define MPI3_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
|
|
#define MPI3_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
|
|
#define MPI3_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
|
|
#define MPI3_SASPHY3_EVENT_CODE_INV_SPL_PACKETS (0x07)
|
|
#define MPI3_SASPHY3_EVENT_CODE_LOSS_SPL_PACKET_SYNC (0x08)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
|
|
#define MPI3_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
|
|
#define MPI3_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
|
|
#define MPI3_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
|
|
#define MPI3_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
|
|
#define MPI3_SASPHY3_EVENT_CODE_CONNECTION (0x2a)
|
|
#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2b)
|
|
#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2c)
|
|
#define MPI3_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2d)
|
|
#define MPI3_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2e)
|
|
#define MPI3_SASPHY3_EVENT_CODE_PERSIST_CONN (0x2f)
|
|
#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
|
|
#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
|
|
#define MPI3_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
|
|
#define MPI3_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
|
|
#define MPI3_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
|
|
#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
|
|
#define MPI3_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xd0)
|
|
#define MPI3_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xd1)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RX_AIP (0xd2)
|
|
#define MPI3_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xd3)
|
|
#define MPI3_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xd4)
|
|
#define MPI3_SASPHY3_EVENT_CODE_LCCONN_TIME (0xd5)
|
|
#define MPI3_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xd6)
|
|
#define MPI3_SASPHY3_EVENT_CODE_SATA_TX_START (0xd7)
|
|
#define MPI3_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xd8)
|
|
#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xd9)
|
|
#define MPI3_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xda)
|
|
#define MPI3_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xdb)
|
|
#define MPI3_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xdc)
|
|
#define MPI3_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
|
|
#define MPI3_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
|
|
#define MPI3_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
|
|
#define MPI3_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
|
|
#define MPI3_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
|
|
#define MPI3_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
|
|
#define MPI3_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
|
|
#define MPI3_SASPHY3_TFLAGS_PHY_RESET (0x0002)
|
|
#define MPI3_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
|
|
#ifndef MPI3_SAS_PHY3_PHY_EVENT_MAX
|
|
#define MPI3_SAS_PHY3_PHY_EVENT_MAX (1)
|
|
#endif
|
|
struct mpi3_sas_phy_page3 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_phy_events;
|
|
u8 reserved0d[3];
|
|
struct mpi3_sas_phy3_phy_event_config phy_event_config[MPI3_SAS_PHY3_PHY_EVENT_MAX];
|
|
};
|
|
|
|
#define MPI3_SASPHY3_PAGEVERSION (0x00)
|
|
struct mpi3_sas_phy_page4 {
|
|
struct mpi3_config_page_header header;
|
|
u8 reserved08[3];
|
|
u8 flags;
|
|
u8 initial_frame[28];
|
|
};
|
|
|
|
#define MPI3_SASPHY4_PAGEVERSION (0x00)
|
|
#define MPI3_SASPHY4_FLAGS_FRAME_VALID (0x02)
|
|
#define MPI3_SASPHY4_FLAGS_SATA_FRAME (0x01)
|
|
#define MPI3_PCIE_LINK_RETIMERS_MASK (0x30)
|
|
#define MPI3_PCIE_LINK_RETIMERS_SHIFT (4)
|
|
#define MPI3_PCIE_NEG_LINK_RATE_MASK (0x0f)
|
|
#define MPI3_PCIE_NEG_LINK_RATE_UNKNOWN (0x00)
|
|
#define MPI3_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01)
|
|
#define MPI3_PCIE_NEG_LINK_RATE_2_5 (0x02)
|
|
#define MPI3_PCIE_NEG_LINK_RATE_5_0 (0x03)
|
|
#define MPI3_PCIE_NEG_LINK_RATE_8_0 (0x04)
|
|
#define MPI3_PCIE_NEG_LINK_RATE_16_0 (0x05)
|
|
#define MPI3_PCIE_NEG_LINK_RATE_32_0 (0x06)
|
|
struct mpi3_pcie_io_unit0_phy_data {
|
|
u8 link;
|
|
u8 link_flags;
|
|
u8 phy_flags;
|
|
u8 negotiated_link_rate;
|
|
__le16 attached_dev_handle;
|
|
__le16 controller_dev_handle;
|
|
__le32 enumeration_status;
|
|
u8 io_unit_port;
|
|
u8 reserved0d[3];
|
|
};
|
|
|
|
#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_MASK (0x10)
|
|
#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_IOUNIT1 (0x00)
|
|
#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_BKPLANE (0x10)
|
|
#define MPI3_PCIEIOUNIT0_LINKFLAGS_ENUM_IN_PROGRESS (0x08)
|
|
#define MPI3_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
|
|
#define MPI3_PCIEIOUNIT0_PHYFLAGS_HOST_PHY (0x01)
|
|
#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCH_DEPTH_EXCEEDED (0x80000000)
|
|
#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000)
|
|
#define MPI3_PCIEIOUNIT0_ES_MAX_ENDPOINTS_EXCEEDED (0x20000000)
|
|
#define MPI3_PCIEIOUNIT0_ES_INSUFFICIENT_RESOURCES (0x10000000)
|
|
#ifndef MPI3_PCIE_IO_UNIT0_PHY_MAX
|
|
#define MPI3_PCIE_IO_UNIT0_PHY_MAX (1)
|
|
#endif
|
|
struct mpi3_pcie_io_unit_page0 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 reserved08;
|
|
u8 num_phys;
|
|
u8 init_status;
|
|
__le16 reserved0e;
|
|
struct mpi3_pcie_io_unit0_phy_data phy_data[MPI3_PCIE_IO_UNIT0_PHY_MAX];
|
|
};
|
|
|
|
#define MPI3_PCIEIOUNIT0_PAGEVERSION (0x00)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_ERRORS (0x00)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_NEEDS_INITIALIZATION (0x01)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_TARGETS_ALLOCATED (0x02)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_RESOURCE_ALLOC_FAILED (0x03)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_NUM_PHYS (0x04)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_UNSUPPORTED_CONFIG (0x05)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_HOST_PORT_MISMATCH (0x06)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_PHYS_NOT_CONSECUTIVE (0x07)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_CLOCKING_MODE (0x08)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_START (0xf0)
|
|
#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_END (0xff)
|
|
struct mpi3_pcie_io_unit1_phy_data {
|
|
u8 link;
|
|
u8 link_flags;
|
|
u8 phy_flags;
|
|
u8 max_min_link_rate;
|
|
__le32 reserved04;
|
|
__le32 reserved08;
|
|
};
|
|
|
|
#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_MASK (0x03)
|
|
#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_DIS_SEPARATE_REFCLK (0x00)
|
|
#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRIS (0x01)
|
|
#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRNS (0x02)
|
|
#define MPI3_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
|
|
#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_MASK (0xf0)
|
|
#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_SHIFT (4)
|
|
#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_2_5 (0x20)
|
|
#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_5_0 (0x30)
|
|
#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_8_0 (0x40)
|
|
#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_16_0 (0x50)
|
|
#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_32_0 (0x60)
|
|
#ifndef MPI3_PCIE_IO_UNIT1_PHY_MAX
|
|
#define MPI3_PCIE_IO_UNIT1_PHY_MAX (1)
|
|
#endif
|
|
struct mpi3_pcie_io_unit_page1 {
|
|
struct mpi3_config_page_header header;
|
|
__le32 control_flags;
|
|
__le32 reserved0c;
|
|
u8 num_phys;
|
|
u8 reserved11;
|
|
__le16 reserved12;
|
|
struct mpi3_pcie_io_unit1_phy_data phy_data[MPI3_PCIE_IO_UNIT1_PHY_MAX];
|
|
};
|
|
|
|
#define MPI3_PCIEIOUNIT1_PAGEVERSION (0x00)
|
|
struct mpi3_pcie_io_unit_page2 {
|
|
struct mpi3_config_page_header header;
|
|
__le16 nv_me_max_queue_depth;
|
|
__le16 reserved0a;
|
|
u8 nv_me_abort_to;
|
|
u8 reserved0d;
|
|
__le16 reserved0e;
|
|
};
|
|
|
|
#define MPI3_PCIEIOUNIT2_PAGEVERSION (0x00)
|
|
struct mpi3_pcie_switch_page0 {
|
|
struct mpi3_config_page_header header;
|
|
u8 io_unit_port;
|
|
u8 switch_status;
|
|
u8 reserved0a[2];
|
|
__le16 dev_handle;
|
|
__le16 parent_dev_handle;
|
|
u8 num_ports;
|
|
u8 pc_ie_level;
|
|
__le16 reserved12;
|
|
__le32 reserved14;
|
|
__le32 reserved18;
|
|
__le32 reserved1c;
|
|
};
|
|
|
|
#define MPI3_PCIESWITCH0_PAGEVERSION (0x00)
|
|
#define MPI3_PCIESWITCH0_SS_NOT_RESPONDING (0x02)
|
|
#define MPI3_PCIESWITCH0_SS_RESPONDING (0x03)
|
|
#define MPI3_PCIESWITCH0_SS_DELAY_NOT_RESPONDING (0x04)
|
|
struct mpi3_pcie_switch_page1 {
|
|
struct mpi3_config_page_header header;
|
|
u8 io_unit_port;
|
|
u8 reserved09[3];
|
|
u8 num_ports;
|
|
u8 port_num;
|
|
__le16 attached_dev_handle;
|
|
__le16 switch_dev_handle;
|
|
u8 negotiated_port_width;
|
|
u8 negotiated_link_rate;
|
|
__le16 slot;
|
|
__le16 slot_index;
|
|
__le32 reserved18;
|
|
};
|
|
|
|
#define MPI3_PCIESWITCH1_PAGEVERSION (0x00)
|
|
struct mpi3_pcie_link_page0 {
|
|
struct mpi3_config_page_header header;
|
|
u8 link;
|
|
u8 reserved09[3];
|
|
__le32 correctable_error_count;
|
|
__le16 n_fatal_error_count;
|
|
__le16 reserved12;
|
|
__le16 fatal_error_count;
|
|
__le16 reserved16;
|
|
};
|
|
|
|
#define MPI3_PCIELINK0_PAGEVERSION (0x00)
|
|
struct mpi3_enclosure_page0 {
|
|
struct mpi3_config_page_header header;
|
|
__le64 enclosure_logical_id;
|
|
__le16 flags;
|
|
__le16 enclosure_handle;
|
|
__le16 num_slots;
|
|
__le16 start_slot;
|
|
u8 io_unit_port;
|
|
u8 enclosure_level;
|
|
__le16 sep_dev_handle;
|
|
__le32 reserved1c;
|
|
};
|
|
|
|
#define MPI3_ENCLOSURE0_PAGEVERSION (0x00)
|
|
#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_MASK (0xc000)
|
|
#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_VIRTUAL (0x0000)
|
|
#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_SAS (0x4000)
|
|
#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_PCIE (0x8000)
|
|
#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT_MASK (0x0010)
|
|
#define MPI3_ENCLS0_FLAGS_ENCL_DEV_NOT_FOUND (0x0000)
|
|
#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT (0x0010)
|
|
#define MPI3_ENCLS0_FLAGS_MNG_MASK (0x000f)
|
|
#define MPI3_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
|
|
#define MPI3_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
|
|
#define MPI3_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0002)
|
|
#define MPI3_DEVICE_DEVFORM_SAS_SATA (0x00)
|
|
#define MPI3_DEVICE_DEVFORM_PCIE (0x01)
|
|
#define MPI3_DEVICE_DEVFORM_VD (0x02)
|
|
struct mpi3_device0_sas_sata_format {
|
|
__le64 sas_address;
|
|
__le16 flags;
|
|
__le16 device_info;
|
|
u8 phy_num;
|
|
u8 attached_phy_identifier;
|
|
u8 max_port_connections;
|
|
u8 zone_group;
|
|
};
|
|
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_SLUMBER_CAP (0x0200)
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_PARTIAL_CAP (0x0100)
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_ASYNC_NOTIFY (0x0080)
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_SW_PRESERVE (0x0040)
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_UNSUPP_DEV (0x0020)
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_48BIT_LBA (0x0010)
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_SMART_SUPP (0x0008)
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_NCQ_SUPP (0x0004)
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_FUA_SUPP (0x0002)
|
|
#define MPI3_DEVICE0_SASSATA_FLAGS_PERSIST_CAP (0x0001)
|
|
struct mpi3_device0_pcie_format {
|
|
u8 supported_link_rates;
|
|
u8 max_port_width;
|
|
u8 negotiated_port_width;
|
|
u8 negotiated_link_rate;
|
|
u8 port_num;
|
|
u8 controller_reset_to;
|
|
__le16 device_info;
|
|
__le32 maximum_data_transfer_size;
|
|
__le32 capabilities;
|
|
__le16 noiob;
|
|
u8 nv_me_abort_to;
|
|
u8 page_size;
|
|
__le16 shutdown_latency;
|
|
__le16 reserved16;
|
|
};
|
|
|
|
#define MPI3_DEVICE0_PCIE_LINK_RATE_32_0_SUPP (0x10)
|
|
#define MPI3_DEVICE0_PCIE_LINK_RATE_16_0_SUPP (0x08)
|
|
#define MPI3_DEVICE0_PCIE_LINK_RATE_8_0_SUPP (0x04)
|
|
#define MPI3_DEVICE0_PCIE_LINK_RATE_5_0_SUPP (0x02)
|
|
#define MPI3_DEVICE0_PCIE_LINK_RATE_2_5_SUPP (0x01)
|
|
#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK (0x0003)
|
|
#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NO_DEVICE (0x0000)
|
|
#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE (0x0001)
|
|
#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SWITCH_DEVICE (0x0002)
|
|
#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE (0x0003)
|
|
#define MPI3_DEVICE0_PCIE_CAP_METADATA_SEPARATED (0x00000010)
|
|
#define MPI3_DEVICE0_PCIE_CAP_SGL_DWORD_ALIGN_REQUIRED (0x00000008)
|
|
#define MPI3_DEVICE0_PCIE_CAP_NVME_SGL_ENABLED (0x00000004)
|
|
#define MPI3_DEVICE0_PCIE_CAP_BIT_BUCKET_SGL_SUPP (0x00000002)
|
|
#define MPI3_DEVICE0_PCIE_CAP_SGL_SUPP (0x00000001)
|
|
struct mpi3_device0_vd_format {
|
|
u8 vd_state;
|
|
u8 raid_level;
|
|
__le16 device_info;
|
|
__le16 flags;
|
|
__le16 reserved06;
|
|
__le32 reserved08[2];
|
|
};
|
|
|
|
#define MPI3_DEVICE0_VD_STATE_OFFLINE (0x00)
|
|
#define MPI3_DEVICE0_VD_STATE_PARTIALLY_DEGRADED (0x01)
|
|
#define MPI3_DEVICE0_VD_STATE_DEGRADED (0x02)
|
|
#define MPI3_DEVICE0_VD_STATE_OPTIMAL (0x03)
|
|
#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_0 (0)
|
|
#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_1 (1)
|
|
#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_5 (5)
|
|
#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_6 (6)
|
|
#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_10 (10)
|
|
#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_50 (50)
|
|
#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_60 (60)
|
|
#define MPI3_DEVICE0_VD_DEVICE_INFO_HDD (0x0010)
|
|
#define MPI3_DEVICE0_VD_DEVICE_INFO_SSD (0x0008)
|
|
#define MPI3_DEVICE0_VD_DEVICE_INFO_NVME (0x0004)
|
|
#define MPI3_DEVICE0_VD_DEVICE_INFO_SATA (0x0002)
|
|
#define MPI3_DEVICE0_VD_DEVICE_INFO_SAS (0x0001)
|
|
#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_MASK (0x0003)
|
|
#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_NONE (0x0000)
|
|
#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_HOST (0x0001)
|
|
#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_IOC (0x0002)
|
|
union mpi3_device0_dev_spec_format {
|
|
struct mpi3_device0_sas_sata_format sas_sata_format;
|
|
struct mpi3_device0_pcie_format pcie_format;
|
|
struct mpi3_device0_vd_format vd_format;
|
|
};
|
|
|
|
struct mpi3_device_page0 {
|
|
struct mpi3_config_page_header header;
|
|
__le16 dev_handle;
|
|
__le16 parent_dev_handle;
|
|
__le16 slot;
|
|
__le16 enclosure_handle;
|
|
__le64 wwid;
|
|
__le16 persistent_id;
|
|
u8 io_unit_port;
|
|
u8 access_status;
|
|
__le16 flags;
|
|
__le16 reserved1e;
|
|
__le16 slot_index;
|
|
__le16 queue_depth;
|
|
u8 reserved24[3];
|
|
u8 device_form;
|
|
union mpi3_device0_dev_spec_format device_specific;
|
|
};
|
|
|
|
#define MPI3_DEVICE0_PAGEVERSION (0x00)
|
|
#define MPI3_DEVICE0_WWID_INVALID (0xffffffffffffffff)
|
|
#define MPI3_DEVICE0_PERSISTENTID_INVALID (0xffff)
|
|
#define MPI3_DEVICE0_IOUNITPORT_INVALID (0xff)
|
|
#define MPI3_DEVICE0_ASTATUS_NO_ERRORS (0x00)
|
|
#define MPI3_DEVICE0_ASTATUS_NEEDS_INITIALIZATION (0x01)
|
|
#define MPI3_DEVICE0_ASTATUS_CAP_UNSUPPORTED (0x02)
|
|
#define MPI3_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x03)
|
|
#define MPI3_DEVICE0_ASTATUS_UNAUTHORIZED (0x04)
|
|
#define MPI3_DEVICE0_ASTATUS_DEVICE_MISSING_DELAY (0x05)
|
|
#define MPI3_DEVICE0_ASTATUS_SAS_UNKNOWN (0x10)
|
|
#define MPI3_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x11)
|
|
#define MPI3_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x12)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_UNKNOWN (0x20)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x21)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_DIAG (0x22)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x23)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x24)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_PIO_SN (0x25)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_MDMA_SN (0x26)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_UDMA_SN (0x27)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x28)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x29)
|
|
#define MPI3_DEVICE0_ASTATUS_SIF_MAX (0x2f)
|
|
#define MPI3_DEVICE0_ASTATUS_PCIE_UNKNOWN (0x30)
|
|
#define MPI3_DEVICE0_ASTATUS_PCIE_MEM_SPACE_ACCESS (0x31)
|
|
#define MPI3_DEVICE0_ASTATUS_PCIE_UNSUPPORTED (0x32)
|
|
#define MPI3_DEVICE0_ASTATUS_PCIE_MSIX_REQUIRED (0x33)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_UNKNOWN (0x40)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_READY_TIMEOUT (0x41)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x42)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_IDENTIFY_FAILED (0x43)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_QCONFIG_FAILED (0x44)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_QCREATION_FAILED (0x45)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_EVENTCFG_FAILED (0x46)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x47)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_IDLE_TIMEOUT (0x48)
|
|
#define MPI3_DEVICE0_ASTATUS_NVME_CTRL_FAILURE_STATUS (0x49)
|
|
#define MPI3_DEVICE0_ASTATUS_VD_UNKNOWN (0x50)
|
|
#define MPI3_DEVICE0_FLAGS_CONTROLLER_DEV_HANDLE (0x0080)
|
|
#define MPI3_DEVICE0_FLAGS_HIDDEN (0x0008)
|
|
#define MPI3_DEVICE0_FLAGS_ATT_METHOD_MASK (0x0006)
|
|
#define MPI3_DEVICE0_FLAGS_ATT_METHOD_NOT_DIR_ATTACHED (0x0000)
|
|
#define MPI3_DEVICE0_FLAGS_ATT_METHOD_DIR_ATTACHED (0x0002)
|
|
#define MPI3_DEVICE0_FLAGS_ATT_METHOD_VIRTUAL (0x0004)
|
|
#define MPI3_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
|
|
#define MPI3_DEVICE0_QUEUE_DEPTH_NOT_APPLICABLE (0x0000)
|
|
struct mpi3_device1_sas_sata_format {
|
|
__le32 reserved00;
|
|
};
|
|
|
|
struct mpi3_device1_pcie_format {
|
|
__le16 vendor_id;
|
|
__le16 device_id;
|
|
__le16 subsystem_vendor_id;
|
|
__le16 subsystem_id;
|
|
__le32 reserved08;
|
|
u8 revision_id;
|
|
u8 reserved0d;
|
|
__le16 pci_parameters;
|
|
};
|
|
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_128B (0x0)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_256B (0x1)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_512B (0x2)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_1024B (0x3)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_2048B (0x4)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_4096B (0x5)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_MASK (0x01c0)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_SHIFT (6)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_MASK (0x0038)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_SHIFT (3)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_MASK (0x0007)
|
|
#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_SHIFT (0)
|
|
struct mpi3_device1_vd_format {
|
|
__le32 reserved00;
|
|
};
|
|
|
|
union mpi3_device1_dev_spec_format {
|
|
struct mpi3_device1_sas_sata_format sas_sata_format;
|
|
struct mpi3_device1_pcie_format pcie_format;
|
|
struct mpi3_device1_vd_format vd_format;
|
|
};
|
|
|
|
struct mpi3_device_page1 {
|
|
struct mpi3_config_page_header header;
|
|
__le16 dev_handle;
|
|
__le16 reserved0a;
|
|
__le32 reserved0c[12];
|
|
u8 reserved3c[3];
|
|
u8 device_form;
|
|
union mpi3_device1_dev_spec_format device_specific;
|
|
};
|
|
|
|
#define MPI3_DEVICE1_PAGEVERSION (0x00)
|
|
#endif
|