648 lines
17 KiB
C
648 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher
|
|
* Mark Cave-Ayland, Carlo E Prelz, Dick Streefland
|
|
* Copyright (c) 2002, 2003 Tuukka Toivonen
|
|
* Copyright (c) 2008 Erik Andrén
|
|
*
|
|
* P/N 861037: Sensor HDCS1000 ASIC STV0600
|
|
* P/N 861050-0010: Sensor HDCS1000 ASIC STV0600
|
|
* P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express
|
|
* P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam
|
|
* P/N 861075-0040: Sensor HDCS1000 ASIC
|
|
* P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB
|
|
* P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/input.h>
|
|
#include "stv06xx_sensor.h"
|
|
|
|
MODULE_AUTHOR("Erik Andrén");
|
|
MODULE_DESCRIPTION("STV06XX USB Camera Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static bool dump_bridge;
|
|
static bool dump_sensor;
|
|
|
|
int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data)
|
|
{
|
|
int err;
|
|
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
|
|
struct usb_device *udev = sd->gspca_dev.dev;
|
|
__u8 *buf = sd->gspca_dev.usb_buf;
|
|
|
|
u8 len = (i2c_data > 0xff) ? 2 : 1;
|
|
|
|
buf[0] = i2c_data & 0xff;
|
|
buf[1] = (i2c_data >> 8) & 0xff;
|
|
|
|
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
0x04, 0x40, address, 0, buf, len,
|
|
STV06XX_URB_MSG_TIMEOUT);
|
|
|
|
gspca_dbg(gspca_dev, D_CONF, "Written 0x%x to address 0x%x, status: %d\n",
|
|
i2c_data, address, err);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
int stv06xx_read_bridge(struct sd *sd, u16 address, u8 *i2c_data)
|
|
{
|
|
int err;
|
|
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
|
|
struct usb_device *udev = sd->gspca_dev.dev;
|
|
__u8 *buf = sd->gspca_dev.usb_buf;
|
|
|
|
err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
0x04, 0xc0, address, 0, buf, 1,
|
|
STV06XX_URB_MSG_TIMEOUT);
|
|
|
|
*i2c_data = buf[0];
|
|
|
|
gspca_dbg(gspca_dev, D_CONF, "Reading 0x%x from address 0x%x, status %d\n",
|
|
*i2c_data, address, err);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
/* Wraps the normal write sensor bytes / words functions for writing a
|
|
single value */
|
|
int stv06xx_write_sensor(struct sd *sd, u8 address, u16 value)
|
|
{
|
|
if (sd->sensor->i2c_len == 2) {
|
|
u16 data[2] = { address, value };
|
|
return stv06xx_write_sensor_words(sd, data, 1);
|
|
} else {
|
|
u8 data[2] = { address, value };
|
|
return stv06xx_write_sensor_bytes(sd, data, 1);
|
|
}
|
|
}
|
|
|
|
static int stv06xx_write_sensor_finish(struct sd *sd)
|
|
{
|
|
int err = 0;
|
|
|
|
if (sd->bridge == BRIDGE_STV610) {
|
|
struct usb_device *udev = sd->gspca_dev.dev;
|
|
__u8 *buf = sd->gspca_dev.usb_buf;
|
|
|
|
buf[0] = 0;
|
|
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
0x04, 0x40, 0x1704, 0, buf, 1,
|
|
STV06XX_URB_MSG_TIMEOUT);
|
|
}
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
int stv06xx_write_sensor_bytes(struct sd *sd, const u8 *data, u8 len)
|
|
{
|
|
int err, i, j;
|
|
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
|
|
struct usb_device *udev = sd->gspca_dev.dev;
|
|
__u8 *buf = sd->gspca_dev.usb_buf;
|
|
|
|
gspca_dbg(gspca_dev, D_CONF, "I2C: Command buffer contains %d entries\n",
|
|
len);
|
|
for (i = 0; i < len;) {
|
|
/* Build the command buffer */
|
|
memset(buf, 0, I2C_BUFFER_LENGTH);
|
|
for (j = 0; j < I2C_MAX_BYTES && i < len; j++, i++) {
|
|
buf[j] = data[2*i];
|
|
buf[0x10 + j] = data[2*i+1];
|
|
gspca_dbg(gspca_dev, D_CONF, "I2C: Writing 0x%02x to reg 0x%02x\n",
|
|
data[2*i+1], data[2*i]);
|
|
}
|
|
buf[0x20] = sd->sensor->i2c_addr;
|
|
buf[0x21] = j - 1; /* Number of commands to send - 1 */
|
|
buf[0x22] = I2C_WRITE_CMD;
|
|
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
0x04, 0x40, 0x0400, 0, buf,
|
|
I2C_BUFFER_LENGTH,
|
|
STV06XX_URB_MSG_TIMEOUT);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
return stv06xx_write_sensor_finish(sd);
|
|
}
|
|
|
|
int stv06xx_write_sensor_words(struct sd *sd, const u16 *data, u8 len)
|
|
{
|
|
int err, i, j;
|
|
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
|
|
struct usb_device *udev = sd->gspca_dev.dev;
|
|
__u8 *buf = sd->gspca_dev.usb_buf;
|
|
|
|
gspca_dbg(gspca_dev, D_CONF, "I2C: Command buffer contains %d entries\n",
|
|
len);
|
|
|
|
for (i = 0; i < len;) {
|
|
/* Build the command buffer */
|
|
memset(buf, 0, I2C_BUFFER_LENGTH);
|
|
for (j = 0; j < I2C_MAX_WORDS && i < len; j++, i++) {
|
|
buf[j] = data[2*i];
|
|
buf[0x10 + j * 2] = data[2*i+1];
|
|
buf[0x10 + j * 2 + 1] = data[2*i+1] >> 8;
|
|
gspca_dbg(gspca_dev, D_CONF, "I2C: Writing 0x%04x to reg 0x%02x\n",
|
|
data[2*i+1], data[2*i]);
|
|
}
|
|
buf[0x20] = sd->sensor->i2c_addr;
|
|
buf[0x21] = j - 1; /* Number of commands to send - 1 */
|
|
buf[0x22] = I2C_WRITE_CMD;
|
|
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
0x04, 0x40, 0x0400, 0, buf,
|
|
I2C_BUFFER_LENGTH,
|
|
STV06XX_URB_MSG_TIMEOUT);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
return stv06xx_write_sensor_finish(sd);
|
|
}
|
|
|
|
int stv06xx_read_sensor(struct sd *sd, const u8 address, u16 *value)
|
|
{
|
|
int err;
|
|
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
|
|
struct usb_device *udev = sd->gspca_dev.dev;
|
|
__u8 *buf = sd->gspca_dev.usb_buf;
|
|
|
|
err = stv06xx_write_bridge(sd, STV_I2C_FLUSH, sd->sensor->i2c_flush);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Clear mem */
|
|
memset(buf, 0, I2C_BUFFER_LENGTH);
|
|
|
|
buf[0] = address;
|
|
buf[0x20] = sd->sensor->i2c_addr;
|
|
buf[0x21] = 0;
|
|
|
|
/* Read I2C register */
|
|
buf[0x22] = I2C_READ_CMD;
|
|
|
|
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
0x04, 0x40, 0x1400, 0, buf, I2C_BUFFER_LENGTH,
|
|
STV06XX_URB_MSG_TIMEOUT);
|
|
if (err < 0) {
|
|
pr_err("I2C: Read error writing address: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
0x04, 0xc0, 0x1410, 0, buf, sd->sensor->i2c_len,
|
|
STV06XX_URB_MSG_TIMEOUT);
|
|
if (sd->sensor->i2c_len == 2)
|
|
*value = buf[0] | (buf[1] << 8);
|
|
else
|
|
*value = buf[0];
|
|
|
|
gspca_dbg(gspca_dev, D_CONF, "I2C: Read 0x%x from address 0x%x, status: %d\n",
|
|
*value, address, err);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
/* Dumps all bridge registers */
|
|
static void stv06xx_dump_bridge(struct sd *sd)
|
|
{
|
|
int i;
|
|
u8 data, buf;
|
|
|
|
pr_info("Dumping all stv06xx bridge registers\n");
|
|
for (i = 0x1400; i < 0x160f; i++) {
|
|
stv06xx_read_bridge(sd, i, &data);
|
|
|
|
pr_info("Read 0x%x from address 0x%x\n", data, i);
|
|
}
|
|
|
|
pr_info("Testing stv06xx bridge registers for writability\n");
|
|
for (i = 0x1400; i < 0x160f; i++) {
|
|
stv06xx_read_bridge(sd, i, &data);
|
|
buf = data;
|
|
|
|
stv06xx_write_bridge(sd, i, 0xff);
|
|
stv06xx_read_bridge(sd, i, &data);
|
|
if (data == 0xff)
|
|
pr_info("Register 0x%x is read/write\n", i);
|
|
else if (data != buf)
|
|
pr_info("Register 0x%x is read/write, but only partially\n",
|
|
i);
|
|
else
|
|
pr_info("Register 0x%x is read-only\n", i);
|
|
|
|
stv06xx_write_bridge(sd, i, buf);
|
|
}
|
|
}
|
|
|
|
/* this function is called at probe and resume time */
|
|
static int stv06xx_init(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
int err;
|
|
|
|
gspca_dbg(gspca_dev, D_PROBE, "Initializing camera\n");
|
|
|
|
/* Let the usb init settle for a bit
|
|
before performing the initialization */
|
|
msleep(250);
|
|
|
|
err = sd->sensor->init(sd);
|
|
|
|
if (dump_sensor && sd->sensor->dump)
|
|
sd->sensor->dump(sd);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
/* this function is called at probe time */
|
|
static int stv06xx_init_controls(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
gspca_dbg(gspca_dev, D_PROBE, "Initializing controls\n");
|
|
|
|
gspca_dev->vdev.ctrl_handler = &gspca_dev->ctrl_handler;
|
|
return sd->sensor->init_controls(sd);
|
|
}
|
|
|
|
/* Start the camera */
|
|
static int stv06xx_start(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
struct usb_host_interface *alt;
|
|
struct usb_interface *intf;
|
|
int err, packet_size;
|
|
|
|
intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
|
|
alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
|
|
if (!alt) {
|
|
gspca_err(gspca_dev, "Couldn't get altsetting\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (alt->desc.bNumEndpoints < 1)
|
|
return -ENODEV;
|
|
|
|
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
|
|
err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Prepare the sensor for start */
|
|
err = sd->sensor->start(sd);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
/* Start isochronous streaming */
|
|
err = stv06xx_write_bridge(sd, STV_ISO_ENABLE, 1);
|
|
|
|
out:
|
|
if (err < 0)
|
|
gspca_dbg(gspca_dev, D_STREAM, "Starting stream failed\n");
|
|
else
|
|
gspca_dbg(gspca_dev, D_STREAM, "Started streaming\n");
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int stv06xx_isoc_init(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct usb_interface_cache *intfc;
|
|
struct usb_host_interface *alt;
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
intfc = gspca_dev->dev->actconfig->intf_cache[0];
|
|
|
|
if (intfc->num_altsetting < 2)
|
|
return -ENODEV;
|
|
|
|
alt = &intfc->altsetting[1];
|
|
|
|
if (alt->desc.bNumEndpoints < 1)
|
|
return -ENODEV;
|
|
|
|
/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
|
|
alt->endpoint[0].desc.wMaxPacketSize =
|
|
cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stv06xx_isoc_nego(struct gspca_dev *gspca_dev)
|
|
{
|
|
int ret, packet_size, min_packet_size;
|
|
struct usb_host_interface *alt;
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
/*
|
|
* Existence of altsetting and endpoint was verified in
|
|
* stv06xx_isoc_init()
|
|
*/
|
|
alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
|
|
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
|
|
min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode];
|
|
if (packet_size <= min_packet_size)
|
|
return -EIO;
|
|
|
|
packet_size -= 100;
|
|
if (packet_size < min_packet_size)
|
|
packet_size = min_packet_size;
|
|
alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(packet_size);
|
|
|
|
ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 1);
|
|
if (ret < 0)
|
|
gspca_err(gspca_dev, "set alt 1 err %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void stv06xx_stopN(struct gspca_dev *gspca_dev)
|
|
{
|
|
int err;
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
/* stop ISO-streaming */
|
|
err = stv06xx_write_bridge(sd, STV_ISO_ENABLE, 0);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
err = sd->sensor->stop(sd);
|
|
|
|
out:
|
|
if (err < 0)
|
|
gspca_dbg(gspca_dev, D_STREAM, "Failed to stop stream\n");
|
|
else
|
|
gspca_dbg(gspca_dev, D_STREAM, "Stopped streaming\n");
|
|
}
|
|
|
|
/*
|
|
* Analyse an USB packet of the data stream and store it appropriately.
|
|
* Each packet contains an integral number of chunks. Each chunk has
|
|
* 2-bytes identification, followed by 2-bytes that describe the chunk
|
|
* length. Known/guessed chunk identifications are:
|
|
* 8001/8005/C001/C005 - Begin new frame
|
|
* 8002/8006/C002/C006 - End frame
|
|
* 0200/4200 - Contains actual image data, bayer or compressed
|
|
* 0005 - 11 bytes of unknown data
|
|
* 0100 - 2 bytes of unknown data
|
|
* The 0005 and 0100 chunks seem to appear only in compressed stream.
|
|
*/
|
|
static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
|
|
u8 *data, /* isoc packet */
|
|
int len) /* iso packet length */
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
gspca_dbg(gspca_dev, D_PACK, "Packet of length %d arrived\n", len);
|
|
|
|
/* A packet may contain several frames
|
|
loop until the whole packet is reached */
|
|
while (len) {
|
|
int id, chunk_len;
|
|
|
|
if (len < 4) {
|
|
gspca_dbg(gspca_dev, D_PACK, "Packet is smaller than 4 bytes\n");
|
|
return;
|
|
}
|
|
|
|
/* Capture the id */
|
|
id = (data[0] << 8) | data[1];
|
|
|
|
/* Capture the chunk length */
|
|
chunk_len = (data[2] << 8) | data[3];
|
|
gspca_dbg(gspca_dev, D_PACK, "Chunk id: %x, length: %d\n",
|
|
id, chunk_len);
|
|
|
|
data += 4;
|
|
len -= 4;
|
|
|
|
if (len < chunk_len) {
|
|
gspca_err(gspca_dev, "URB packet length is smaller than the specified chunk length\n");
|
|
gspca_dev->last_packet_type = DISCARD_PACKET;
|
|
return;
|
|
}
|
|
|
|
/* First byte seem to be 02=data 2nd byte is unknown??? */
|
|
if (sd->bridge == BRIDGE_ST6422 && (id & 0xff00) == 0x0200)
|
|
goto frame_data;
|
|
|
|
switch (id) {
|
|
case 0x0200:
|
|
case 0x4200:
|
|
frame_data:
|
|
gspca_dbg(gspca_dev, D_PACK, "Frame data packet detected\n");
|
|
|
|
if (sd->to_skip) {
|
|
int skip = (sd->to_skip < chunk_len) ?
|
|
sd->to_skip : chunk_len;
|
|
data += skip;
|
|
len -= skip;
|
|
chunk_len -= skip;
|
|
sd->to_skip -= skip;
|
|
}
|
|
|
|
gspca_frame_add(gspca_dev, INTER_PACKET,
|
|
data, chunk_len);
|
|
break;
|
|
|
|
case 0x8001:
|
|
case 0x8005:
|
|
case 0xc001:
|
|
case 0xc005:
|
|
gspca_dbg(gspca_dev, D_PACK, "Starting new frame\n");
|
|
|
|
/* Create a new frame, chunk length should be zero */
|
|
gspca_frame_add(gspca_dev, FIRST_PACKET,
|
|
NULL, 0);
|
|
|
|
if (sd->bridge == BRIDGE_ST6422)
|
|
sd->to_skip = gspca_dev->pixfmt.width * 4;
|
|
|
|
if (chunk_len)
|
|
gspca_err(gspca_dev, "Chunk length is non-zero on a SOF\n");
|
|
break;
|
|
|
|
case 0x8002:
|
|
case 0x8006:
|
|
case 0xc002:
|
|
gspca_dbg(gspca_dev, D_PACK, "End of frame detected\n");
|
|
|
|
/* Complete the last frame (if any) */
|
|
gspca_frame_add(gspca_dev, LAST_PACKET,
|
|
NULL, 0);
|
|
|
|
if (chunk_len)
|
|
gspca_err(gspca_dev, "Chunk length is non-zero on a EOF\n");
|
|
break;
|
|
|
|
case 0x0005:
|
|
gspca_dbg(gspca_dev, D_PACK, "Chunk 0x005 detected\n");
|
|
/* Unknown chunk with 11 bytes of data,
|
|
occurs just before end of each frame
|
|
in compressed mode */
|
|
break;
|
|
|
|
case 0x0100:
|
|
gspca_dbg(gspca_dev, D_PACK, "Chunk 0x0100 detected\n");
|
|
/* Unknown chunk with 2 bytes of data,
|
|
occurs 2-3 times per USB interrupt */
|
|
break;
|
|
case 0x42ff:
|
|
gspca_dbg(gspca_dev, D_PACK, "Chunk 0x42ff detected\n");
|
|
/* Special chunk seen sometimes on the ST6422 */
|
|
break;
|
|
default:
|
|
gspca_dbg(gspca_dev, D_PACK, "Unknown chunk 0x%04x detected\n",
|
|
id);
|
|
/* Unknown chunk */
|
|
}
|
|
data += chunk_len;
|
|
len -= chunk_len;
|
|
}
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_INPUT)
|
|
static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
|
|
u8 *data, /* interrupt packet data */
|
|
int len) /* interrupt packet length */
|
|
{
|
|
int ret = -EINVAL;
|
|
|
|
if (len == 1 && (data[0] == 0x80 || data[0] == 0x10)) {
|
|
input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1);
|
|
input_sync(gspca_dev->input_dev);
|
|
ret = 0;
|
|
}
|
|
|
|
if (len == 1 && (data[0] == 0x88 || data[0] == 0x11)) {
|
|
input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
|
|
input_sync(gspca_dev->input_dev);
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int stv06xx_config(struct gspca_dev *gspca_dev,
|
|
const struct usb_device_id *id);
|
|
|
|
static void stv06xx_probe_error(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *)gspca_dev;
|
|
|
|
kfree(sd->sensor_priv);
|
|
sd->sensor_priv = NULL;
|
|
}
|
|
|
|
/* sub-driver description */
|
|
static const struct sd_desc sd_desc = {
|
|
.name = MODULE_NAME,
|
|
.config = stv06xx_config,
|
|
.init = stv06xx_init,
|
|
.init_controls = stv06xx_init_controls,
|
|
.probe_error = stv06xx_probe_error,
|
|
.start = stv06xx_start,
|
|
.stopN = stv06xx_stopN,
|
|
.pkt_scan = stv06xx_pkt_scan,
|
|
.isoc_init = stv06xx_isoc_init,
|
|
.isoc_nego = stv06xx_isoc_nego,
|
|
#if IS_ENABLED(CONFIG_INPUT)
|
|
.int_pkt_scan = sd_int_pkt_scan,
|
|
#endif
|
|
};
|
|
|
|
/* This function is called at probe time */
|
|
static int stv06xx_config(struct gspca_dev *gspca_dev,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
gspca_dbg(gspca_dev, D_PROBE, "Configuring camera\n");
|
|
|
|
sd->bridge = id->driver_info;
|
|
gspca_dev->sd_desc = &sd_desc;
|
|
|
|
if (dump_bridge)
|
|
stv06xx_dump_bridge(sd);
|
|
|
|
sd->sensor = &stv06xx_sensor_st6422;
|
|
if (!sd->sensor->probe(sd))
|
|
return 0;
|
|
|
|
sd->sensor = &stv06xx_sensor_vv6410;
|
|
if (!sd->sensor->probe(sd))
|
|
return 0;
|
|
|
|
sd->sensor = &stv06xx_sensor_hdcs1x00;
|
|
if (!sd->sensor->probe(sd))
|
|
return 0;
|
|
|
|
sd->sensor = &stv06xx_sensor_hdcs1020;
|
|
if (!sd->sensor->probe(sd))
|
|
return 0;
|
|
|
|
sd->sensor = &stv06xx_sensor_pb0100;
|
|
if (!sd->sensor->probe(sd))
|
|
return 0;
|
|
|
|
sd->sensor = NULL;
|
|
return -ENODEV;
|
|
}
|
|
|
|
|
|
|
|
/* -- module initialisation -- */
|
|
static const struct usb_device_id device_table[] = {
|
|
{USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, /* QuickCam Express */
|
|
{USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 }, /* LEGO cam / QuickCam Web */
|
|
{USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 }, /* Dexxa WebCam USB */
|
|
{USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 }, /* QuickCam Messenger */
|
|
{USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 }, /* QuickCam Communicate */
|
|
{USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 }, /* QuickCam Messenger (new) */
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, device_table);
|
|
|
|
/* -- device connect -- */
|
|
static int sd_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
|
|
THIS_MODULE);
|
|
}
|
|
|
|
static void sd_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
void *priv = sd->sensor_priv;
|
|
gspca_dbg(gspca_dev, D_PROBE, "Disconnecting the stv06xx device\n");
|
|
|
|
sd->sensor = NULL;
|
|
gspca_disconnect(intf);
|
|
kfree(priv);
|
|
}
|
|
|
|
static struct usb_driver sd_driver = {
|
|
.name = MODULE_NAME,
|
|
.id_table = device_table,
|
|
.probe = sd_probe,
|
|
.disconnect = sd_disconnect,
|
|
#ifdef CONFIG_PM
|
|
.suspend = gspca_suspend,
|
|
.resume = gspca_resume,
|
|
.reset_resume = gspca_resume,
|
|
#endif
|
|
};
|
|
|
|
module_usb_driver(sd_driver);
|
|
|
|
module_param(dump_bridge, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup");
|
|
|
|
module_param(dump_sensor, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(dump_sensor, "Dumps all sensor registers at startup");
|