214 lines
10 KiB
Plaintext
214 lines
10 KiB
Plaintext
****************************
|
|
RDMA Transport (RTRS)
|
|
****************************
|
|
|
|
RTRS (RDMA Transport) is a reliable high speed transport library
|
|
which provides support to establish optimal number of connections
|
|
between client and server machines using RDMA (InfiniBand, RoCE, iWarp)
|
|
transport. It is optimized to transfer (read/write) IO blocks.
|
|
|
|
In its core interface it follows the BIO semantics of providing the
|
|
possibility to either write data from an sg list to the remote side
|
|
or to request ("read") data transfer from the remote side into a given
|
|
sg list.
|
|
|
|
RTRS provides I/O fail-over and load-balancing capabilities by using
|
|
multipath I/O (see "add_path" and "mp_policy" configuration entries in
|
|
Documentation/ABI/testing/sysfs-class-rtrs-client).
|
|
|
|
RTRS is used by the RNBD (RDMA Network Block Device) modules.
|
|
|
|
==================
|
|
Transport protocol
|
|
==================
|
|
|
|
Overview
|
|
--------
|
|
An established connection between a client and a server is called rtrs
|
|
session. A session is associated with a set of memory chunks reserved on the
|
|
server side for a given client for rdma transfer. A session
|
|
consists of multiple paths, each representing a separate physical link
|
|
between client and server. Those are used for load balancing and failover.
|
|
Each path consists of as many connections (QPs) as there are cpus on
|
|
the client.
|
|
|
|
When processing an incoming write or read request, rtrs client uses memory
|
|
chunks reserved for him on the server side. Their number, size and addresses
|
|
need to be exchanged between client and server during the connection
|
|
establishment phase. Apart from the memory related information client needs to
|
|
inform the server about the session name and identify each path and connection
|
|
individually.
|
|
|
|
On an established session client sends to server write or read messages.
|
|
Server uses immediate field to tell the client which request is being
|
|
acknowledged and for errno. Client uses immediate field to tell the server
|
|
which of the memory chunks has been accessed and at which offset the message
|
|
can be found.
|
|
|
|
Module parameter always_invalidate is introduced for the security problem
|
|
discussed in LPC RDMA MC 2019. When always_invalidate=Y, on the server side we
|
|
invalidate each rdma buffer before we hand it over to RNBD server and
|
|
then pass it to the block layer. A new rkey is generated and registered for the
|
|
buffer after it returns back from the block layer and RNBD server.
|
|
The new rkey is sent back to the client along with the IO result.
|
|
The procedure is the default behaviour of the driver. This invalidation and
|
|
registration on each IO causes performance drop of up to 20%. A user of the
|
|
driver may choose to load the modules with this mechanism switched off
|
|
(always_invalidate=N), if he understands and can take the risk of a malicious
|
|
client being able to corrupt memory of a server it is connected to. This might
|
|
be a reasonable option in a scenario where all the clients and all the servers
|
|
are located within a secure datacenter.
|
|
|
|
|
|
Connection establishment
|
|
------------------------
|
|
|
|
1. Client starts establishing connections belonging to a path of a session one
|
|
by one via attaching RTRS_MSG_CON_REQ messages to the rdma_connect requests.
|
|
Those include uuid of the session and uuid of the path to be
|
|
established. They are used by the server to find a persisting session/path or
|
|
to create a new one when necessary. The message also contains the protocol
|
|
version and magic for compatibility, total number of connections per session
|
|
(as many as cpus on the client), the id of the current connection and
|
|
the reconnect counter, which is used to resolve the situations where
|
|
client is trying to reconnect a path, while server is still destroying the old
|
|
one.
|
|
|
|
2. Server accepts the connection requests one by one and attaches
|
|
RTRS_MSG_CONN_RSP messages to the rdma_accept. Apart from magic and
|
|
protocol version, the messages include error code, queue depth supported by
|
|
the server (number of memory chunks which are going to be allocated for that
|
|
session) and the maximum size of one io, RTRS_MSG_NEW_RKEY_F flags is set
|
|
when always_invalidate=Y.
|
|
|
|
3. After all connections of a path are established client sends to server the
|
|
RTRS_MSG_INFO_REQ message, containing the name of the session. This message
|
|
requests the address information from the server.
|
|
|
|
4. Server replies to the session info request message with RTRS_MSG_INFO_RSP,
|
|
which contains the addresses and keys of the RDMA buffers allocated for that
|
|
session.
|
|
|
|
5. Session becomes connected after all paths to be established are connected
|
|
(i.e. steps 1-4 finished for all paths requested for a session)
|
|
|
|
6. Server and client exchange periodically heartbeat messages (empty rdma
|
|
messages with an immediate field) which are used to detect a crash on remote
|
|
side or network outage in an absence of IO.
|
|
|
|
7. On any RDMA related error or in the case of a heartbeat timeout, the
|
|
corresponding path is disconnected, all the inflight IO are failed over to a
|
|
healthy path, if any, and the reconnect mechanism is triggered.
|
|
|
|
CLT SRV
|
|
*for each connection belonging to a path and for each path:
|
|
RTRS_MSG_CON_REQ ------------------->
|
|
<------------------- RTRS_MSG_CON_RSP
|
|
...
|
|
*after all connections are established:
|
|
RTRS_MSG_INFO_REQ ------------------->
|
|
<------------------- RTRS_MSG_INFO_RSP
|
|
*heartbeat is started from both sides:
|
|
-------------------> [RTRS_HB_MSG_IMM]
|
|
[RTRS_HB_MSG_ACK] <-------------------
|
|
[RTRS_HB_MSG_IMM] <-------------------
|
|
-------------------> [RTRS_HB_MSG_ACK]
|
|
|
|
IO path
|
|
-------
|
|
|
|
* Write (always_invalidate=N) *
|
|
|
|
1. When processing a write request client selects one of the memory chunks
|
|
on the server side and rdma writes there the user data, user header and the
|
|
RTRS_MSG_RDMA_WRITE message. Apart from the type (write), the message only
|
|
contains size of the user header. The client tells the server which chunk has
|
|
been accessed and at what offset the RTRS_MSG_RDMA_WRITE can be found by
|
|
using the IMM field.
|
|
|
|
2. When confirming a write request server sends an "empty" rdma message with
|
|
an immediate field. The 32 bit field is used to specify the outstanding
|
|
inflight IO and for the error code.
|
|
|
|
CLT SRV
|
|
usr_data + usr_hdr + rtrs_msg_rdma_write -----------------> [RTRS_IO_REQ_IMM]
|
|
[RTRS_IO_RSP_IMM] <----------------- (id + errno)
|
|
|
|
* Write (always_invalidate=Y) *
|
|
|
|
1. When processing a write request client selects one of the memory chunks
|
|
on the server side and rdma writes there the user data, user header and the
|
|
RTRS_MSG_RDMA_WRITE message. Apart from the type (write), the message only
|
|
contains size of the user header. The client tells the server which chunk has
|
|
been accessed and at what offset the RTRS_MSG_RDMA_WRITE can be found by
|
|
using the IMM field, Server invalidate rkey associated to the memory chunks
|
|
first, when it finishes, pass the IO to RNBD server module.
|
|
|
|
2. When confirming a write request server sends an "empty" rdma message with
|
|
an immediate field. The 32 bit field is used to specify the outstanding
|
|
inflight IO and for the error code. The new rkey is sent back using
|
|
SEND_WITH_IMM WR, client When it recived new rkey message, it validates
|
|
the message and finished IO after update rkey for the rbuffer, then post
|
|
back the recv buffer for later use.
|
|
|
|
CLT SRV
|
|
usr_data + usr_hdr + rtrs_msg_rdma_write -----------------> [RTRS_IO_REQ_IMM]
|
|
[RTRS_MSG_RKEY_RSP] <----------------- (RTRS_MSG_RKEY_RSP)
|
|
[RTRS_IO_RSP_IMM] <----------------- (id + errno)
|
|
|
|
|
|
* Read (always_invalidate=N)*
|
|
|
|
1. When processing a read request client selects one of the memory chunks
|
|
on the server side and rdma writes there the user header and the
|
|
RTRS_MSG_RDMA_READ message. This message contains the type (read), size of
|
|
the user header, flags (specifying if memory invalidation is necessary) and the
|
|
list of addresses along with keys for the data to be read into.
|
|
|
|
2. When confirming a read request server transfers the requested data first,
|
|
attaches an invalidation message if requested and finally an "empty" rdma
|
|
message with an immediate field. The 32 bit field is used to specify the
|
|
outstanding inflight IO and the error code.
|
|
|
|
CLT SRV
|
|
usr_hdr + rtrs_msg_rdma_read --------------> [RTRS_IO_REQ_IMM]
|
|
[RTRS_IO_RSP_IMM] <-------------- usr_data + (id + errno)
|
|
or in case client requested invalidation:
|
|
[RTRS_IO_RSP_IMM_W_INV] <-------------- usr_data + (INV) + (id + errno)
|
|
|
|
* Read (always_invalidate=Y)*
|
|
|
|
1. When processing a read request client selects one of the memory chunks
|
|
on the server side and rdma writes there the user header and the
|
|
RTRS_MSG_RDMA_READ message. This message contains the type (read), size of
|
|
the user header, flags (specifying if memory invalidation is necessary) and the
|
|
list of addresses along with keys for the data to be read into.
|
|
Server invalidate rkey associated to the memory chunks first, when it finishes,
|
|
passes the IO to RNBD server module.
|
|
|
|
2. When confirming a read request server transfers the requested data first,
|
|
attaches an invalidation message if requested and finally an "empty" rdma
|
|
message with an immediate field. The 32 bit field is used to specify the
|
|
outstanding inflight IO and the error code. The new rkey is sent back using
|
|
SEND_WITH_IMM WR, client When it recived new rkey message, it validates
|
|
the message and finished IO after update rkey for the rbuffer, then post
|
|
back the recv buffer for later use.
|
|
|
|
CLT SRV
|
|
usr_hdr + rtrs_msg_rdma_read --------------> [RTRS_IO_REQ_IMM]
|
|
[RTRS_IO_RSP_IMM] <-------------- usr_data + (id + errno)
|
|
[RTRS_MSG_RKEY_RSP] <----------------- (RTRS_MSG_RKEY_RSP)
|
|
or in case client requested invalidation:
|
|
[RTRS_IO_RSP_IMM_W_INV] <-------------- usr_data + (INV) + (id + errno)
|
|
=========================================
|
|
Contributors List(in alphabetical order)
|
|
=========================================
|
|
Danil Kipnis <danil.kipnis@profitbricks.com>
|
|
Fabian Holler <mail@fholler.de>
|
|
Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
|
|
Jack Wang <jinpu.wang@profitbricks.com>
|
|
Kleber Souza <kleber.souza@profitbricks.com>
|
|
Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
|
|
Milind Dumbare <Milind.dumbare@gmail.com>
|
|
Roman Penyaev <roman.penyaev@profitbricks.com>
|