242 lines
5.5 KiB
C
242 lines
5.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2014 Angelo Compagnucci <angelo.compagnucci@gmail.com>
|
|
*
|
|
* Driver for Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip.
|
|
* Datasheets can be found here:
|
|
* https://www.ti.com/lit/ds/symlink/adc128s052.pdf
|
|
* https://www.ti.com/lit/ds/symlink/adc122s021.pdf
|
|
* https://www.ti.com/lit/ds/symlink/adc124s021.pdf
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/err.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
struct adc128_configuration {
|
|
const struct iio_chan_spec *channels;
|
|
u8 num_channels;
|
|
};
|
|
|
|
struct adc128 {
|
|
struct spi_device *spi;
|
|
|
|
struct regulator *reg;
|
|
struct mutex lock;
|
|
|
|
u8 buffer[2] ____cacheline_aligned;
|
|
};
|
|
|
|
static int adc128_adc_conversion(struct adc128 *adc, u8 channel)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&adc->lock);
|
|
|
|
adc->buffer[0] = channel << 3;
|
|
adc->buffer[1] = 0;
|
|
|
|
ret = spi_write(adc->spi, &adc->buffer, 2);
|
|
if (ret < 0) {
|
|
mutex_unlock(&adc->lock);
|
|
return ret;
|
|
}
|
|
|
|
ret = spi_read(adc->spi, &adc->buffer, 2);
|
|
|
|
mutex_unlock(&adc->lock);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ((adc->buffer[0] << 8 | adc->buffer[1]) & 0xFFF);
|
|
}
|
|
|
|
static int adc128_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *channel, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct adc128 *adc = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
|
|
ret = adc128_adc_conversion(adc, channel->channel);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
|
|
ret = regulator_get_voltage(adc->reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = ret / 1000;
|
|
*val2 = 12;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
}
|
|
|
|
#define ADC128_VOLTAGE_CHANNEL(num) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = (num), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
|
|
}
|
|
|
|
static const struct iio_chan_spec adc128s052_channels[] = {
|
|
ADC128_VOLTAGE_CHANNEL(0),
|
|
ADC128_VOLTAGE_CHANNEL(1),
|
|
ADC128_VOLTAGE_CHANNEL(2),
|
|
ADC128_VOLTAGE_CHANNEL(3),
|
|
ADC128_VOLTAGE_CHANNEL(4),
|
|
ADC128_VOLTAGE_CHANNEL(5),
|
|
ADC128_VOLTAGE_CHANNEL(6),
|
|
ADC128_VOLTAGE_CHANNEL(7),
|
|
};
|
|
|
|
static const struct iio_chan_spec adc122s021_channels[] = {
|
|
ADC128_VOLTAGE_CHANNEL(0),
|
|
ADC128_VOLTAGE_CHANNEL(1),
|
|
};
|
|
|
|
static const struct iio_chan_spec adc124s021_channels[] = {
|
|
ADC128_VOLTAGE_CHANNEL(0),
|
|
ADC128_VOLTAGE_CHANNEL(1),
|
|
ADC128_VOLTAGE_CHANNEL(2),
|
|
ADC128_VOLTAGE_CHANNEL(3),
|
|
};
|
|
|
|
static const struct adc128_configuration adc128_config[] = {
|
|
{ adc128s052_channels, ARRAY_SIZE(adc128s052_channels) },
|
|
{ adc122s021_channels, ARRAY_SIZE(adc122s021_channels) },
|
|
{ adc124s021_channels, ARRAY_SIZE(adc124s021_channels) },
|
|
};
|
|
|
|
static const struct iio_info adc128_info = {
|
|
.read_raw = adc128_read_raw,
|
|
};
|
|
|
|
static int adc128_probe(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
unsigned int config;
|
|
struct adc128 *adc;
|
|
int ret;
|
|
|
|
if (dev_fwnode(&spi->dev))
|
|
config = (unsigned long) device_get_match_data(&spi->dev);
|
|
else
|
|
config = spi_get_device_id(spi)->driver_data;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
adc = iio_priv(indio_dev);
|
|
adc->spi = spi;
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &adc128_info;
|
|
|
|
indio_dev->channels = adc128_config[config].channels;
|
|
indio_dev->num_channels = adc128_config[config].num_channels;
|
|
|
|
adc->reg = devm_regulator_get(&spi->dev, "vref");
|
|
if (IS_ERR(adc->reg))
|
|
return PTR_ERR(adc->reg);
|
|
|
|
ret = regulator_enable(adc->reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_init(&adc->lock);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto err_disable_regulator;
|
|
|
|
return 0;
|
|
|
|
err_disable_regulator:
|
|
regulator_disable(adc->reg);
|
|
return ret;
|
|
}
|
|
|
|
static int adc128_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct adc128 *adc = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
regulator_disable(adc->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id adc128_of_match[] = {
|
|
{ .compatible = "ti,adc128s052", .data = (void*)0L, },
|
|
{ .compatible = "ti,adc122s021", .data = (void*)1L, },
|
|
{ .compatible = "ti,adc122s051", .data = (void*)1L, },
|
|
{ .compatible = "ti,adc122s101", .data = (void*)1L, },
|
|
{ .compatible = "ti,adc124s021", .data = (void*)2L, },
|
|
{ .compatible = "ti,adc124s051", .data = (void*)2L, },
|
|
{ .compatible = "ti,adc124s101", .data = (void*)2L, },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, adc128_of_match);
|
|
|
|
static const struct spi_device_id adc128_id[] = {
|
|
{ "adc128s052", 0 }, /* index into adc128_config */
|
|
{ "adc122s021", 1 },
|
|
{ "adc122s051", 1 },
|
|
{ "adc122s101", 1 },
|
|
{ "adc124s021", 2 },
|
|
{ "adc124s051", 2 },
|
|
{ "adc124s101", 2 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, adc128_id);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id adc128_acpi_match[] = {
|
|
{ "AANT1280", 2 }, /* ADC124S021 compatible ACPI ID */
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, adc128_acpi_match);
|
|
#endif
|
|
|
|
static struct spi_driver adc128_driver = {
|
|
.driver = {
|
|
.name = "adc128s052",
|
|
.of_match_table = adc128_of_match,
|
|
.acpi_match_table = ACPI_PTR(adc128_acpi_match),
|
|
},
|
|
.probe = adc128_probe,
|
|
.remove = adc128_remove,
|
|
.id_table = adc128_id,
|
|
};
|
|
module_spi_driver(adc128_driver);
|
|
|
|
MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
|
|
MODULE_DESCRIPTION("Texas Instruments ADC128S052");
|
|
MODULE_LICENSE("GPL v2");
|