130 lines
4.2 KiB
C
130 lines
4.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2013 Red Hat
|
|
* Author: Rob Clark <robdclark@gmail.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include "hdmi.h"
|
|
|
|
static void hdmi_phy_8x60_powerup(struct hdmi_phy *phy,
|
|
unsigned long int pixclock)
|
|
{
|
|
/* De-serializer delay D/C for non-lbk mode: */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG0,
|
|
HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(3));
|
|
|
|
if (pixclock == 27000000) {
|
|
/* video_format == HDMI_VFRMT_720x480p60_16_9 */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
|
|
HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
|
|
HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(3));
|
|
} else {
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
|
|
HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
|
|
HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(4));
|
|
}
|
|
|
|
/* No matter what, start from the power down mode: */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
|
|
HDMI_8x60_PHY_REG2_PD_PWRGEN |
|
|
HDMI_8x60_PHY_REG2_PD_PLL |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
|
|
HDMI_8x60_PHY_REG2_PD_DESER);
|
|
|
|
/* Turn PowerGen on: */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
|
|
HDMI_8x60_PHY_REG2_PD_PLL |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
|
|
HDMI_8x60_PHY_REG2_PD_DESER);
|
|
|
|
/* Turn PLL power on: */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
|
|
HDMI_8x60_PHY_REG2_PD_DESER);
|
|
|
|
/* Write to HIGH after PLL power down de-assert: */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3,
|
|
HDMI_8x60_PHY_REG3_PLL_ENABLE);
|
|
|
|
/* ASIC power on; PHY REG9 = 0 */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);
|
|
|
|
/* Enable PLL lock detect, PLL lock det will go high after lock
|
|
* Enable the re-time logic
|
|
*/
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
|
|
HDMI_8x60_PHY_REG12_RETIMING_EN |
|
|
HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN);
|
|
|
|
/* Drivers are on: */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
|
|
HDMI_8x60_PHY_REG2_PD_DESER);
|
|
|
|
/* If the RX detector is needed: */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
|
|
HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
|
|
HDMI_8x60_PHY_REG2_PD_DESER);
|
|
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG4, 0);
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG5, 0);
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG6, 0);
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG7, 0);
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG8, 0);
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG10, 0);
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG11, 0);
|
|
|
|
/* If we want to use lock enable based on counting: */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
|
|
HDMI_8x60_PHY_REG12_RETIMING_EN |
|
|
HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN |
|
|
HDMI_8x60_PHY_REG12_FORCE_LOCK);
|
|
}
|
|
|
|
static void hdmi_phy_8x60_powerdown(struct hdmi_phy *phy)
|
|
{
|
|
/* Assert RESET PHY from controller */
|
|
hdmi_phy_write(phy, REG_HDMI_PHY_CTRL,
|
|
HDMI_PHY_CTRL_SW_RESET);
|
|
udelay(10);
|
|
/* De-assert RESET PHY from controller */
|
|
hdmi_phy_write(phy, REG_HDMI_PHY_CTRL, 0);
|
|
/* Turn off Driver */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
|
|
HDMI_8x60_PHY_REG2_PD_DESER);
|
|
udelay(10);
|
|
/* Disable PLL */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3, 0);
|
|
/* Power down PHY, but keep RX-sense: */
|
|
hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
|
|
HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
|
|
HDMI_8x60_PHY_REG2_PD_PWRGEN |
|
|
HDMI_8x60_PHY_REG2_PD_PLL |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
|
|
HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
|
|
HDMI_8x60_PHY_REG2_PD_DESER);
|
|
}
|
|
|
|
const struct hdmi_phy_cfg msm_hdmi_phy_8x60_cfg = {
|
|
.type = MSM_HDMI_PHY_8x60,
|
|
.powerup = hdmi_phy_8x60_powerup,
|
|
.powerdown = hdmi_phy_8x60_powerdown,
|
|
};
|