1039 lines
26 KiB
C
1039 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2019-2020. Linaro Limited.
|
|
*/
|
|
|
|
#include <linux/firmware.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <sound/hdmi-codec.h>
|
|
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_bridge.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_print.h>
|
|
#include <drm/drm_probe_helper.h>
|
|
|
|
#define EDID_BLOCK_SIZE 128
|
|
#define EDID_NUM_BLOCKS 2
|
|
|
|
struct lt9611uxc {
|
|
struct device *dev;
|
|
struct drm_bridge bridge;
|
|
struct drm_connector connector;
|
|
|
|
struct regmap *regmap;
|
|
/* Protects all accesses to registers by stopping the on-chip MCU */
|
|
struct mutex ocm_lock;
|
|
|
|
struct wait_queue_head wq;
|
|
struct work_struct work;
|
|
|
|
struct device_node *dsi0_node;
|
|
struct device_node *dsi1_node;
|
|
struct mipi_dsi_device *dsi0;
|
|
struct mipi_dsi_device *dsi1;
|
|
struct platform_device *audio_pdev;
|
|
|
|
struct gpio_desc *reset_gpio;
|
|
struct gpio_desc *enable_gpio;
|
|
|
|
struct regulator_bulk_data supplies[2];
|
|
|
|
struct i2c_client *client;
|
|
|
|
bool hpd_supported;
|
|
bool edid_read;
|
|
/* can be accessed from different threads, so protect this with ocm_lock */
|
|
bool hdmi_connected;
|
|
uint8_t fw_version;
|
|
};
|
|
|
|
#define LT9611_PAGE_CONTROL 0xff
|
|
|
|
static const struct regmap_range_cfg lt9611uxc_ranges[] = {
|
|
{
|
|
.name = "register_range",
|
|
.range_min = 0,
|
|
.range_max = 0xd0ff,
|
|
.selector_reg = LT9611_PAGE_CONTROL,
|
|
.selector_mask = 0xff,
|
|
.selector_shift = 0,
|
|
.window_start = 0,
|
|
.window_len = 0x100,
|
|
},
|
|
};
|
|
|
|
static const struct regmap_config lt9611uxc_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xffff,
|
|
.ranges = lt9611uxc_ranges,
|
|
.num_ranges = ARRAY_SIZE(lt9611uxc_ranges),
|
|
};
|
|
|
|
struct lt9611uxc_mode {
|
|
u16 hdisplay;
|
|
u16 vdisplay;
|
|
u8 vrefresh;
|
|
};
|
|
|
|
/*
|
|
* This chip supports only a fixed set of modes.
|
|
* Enumerate them here to check whether the mode is supported.
|
|
*/
|
|
static struct lt9611uxc_mode lt9611uxc_modes[] = {
|
|
{ 1920, 1080, 60 },
|
|
{ 1920, 1080, 30 },
|
|
{ 1920, 1080, 25 },
|
|
{ 1366, 768, 60 },
|
|
{ 1360, 768, 60 },
|
|
{ 1280, 1024, 60 },
|
|
{ 1280, 800, 60 },
|
|
{ 1280, 720, 60 },
|
|
{ 1280, 720, 50 },
|
|
{ 1280, 720, 30 },
|
|
{ 1152, 864, 60 },
|
|
{ 1024, 768, 60 },
|
|
{ 800, 600, 60 },
|
|
{ 720, 576, 50 },
|
|
{ 720, 480, 60 },
|
|
{ 640, 480, 60 },
|
|
};
|
|
|
|
static struct lt9611uxc *bridge_to_lt9611uxc(struct drm_bridge *bridge)
|
|
{
|
|
return container_of(bridge, struct lt9611uxc, bridge);
|
|
}
|
|
|
|
static struct lt9611uxc *connector_to_lt9611uxc(struct drm_connector *connector)
|
|
{
|
|
return container_of(connector, struct lt9611uxc, connector);
|
|
}
|
|
|
|
static void lt9611uxc_lock(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
mutex_lock(<9611uxc->ocm_lock);
|
|
regmap_write(lt9611uxc->regmap, 0x80ee, 0x01);
|
|
}
|
|
|
|
static void lt9611uxc_unlock(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
regmap_write(lt9611uxc->regmap, 0x80ee, 0x00);
|
|
msleep(50);
|
|
mutex_unlock(<9611uxc->ocm_lock);
|
|
}
|
|
|
|
static irqreturn_t lt9611uxc_irq_thread_handler(int irq, void *dev_id)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = dev_id;
|
|
unsigned int irq_status = 0;
|
|
unsigned int hpd_status = 0;
|
|
|
|
lt9611uxc_lock(lt9611uxc);
|
|
|
|
regmap_read(lt9611uxc->regmap, 0xb022, &irq_status);
|
|
regmap_read(lt9611uxc->regmap, 0xb023, &hpd_status);
|
|
if (irq_status)
|
|
regmap_write(lt9611uxc->regmap, 0xb022, 0);
|
|
|
|
if (irq_status & BIT(0)) {
|
|
lt9611uxc->edid_read = !!(hpd_status & BIT(0));
|
|
wake_up_all(<9611uxc->wq);
|
|
}
|
|
|
|
if (irq_status & BIT(1)) {
|
|
lt9611uxc->hdmi_connected = hpd_status & BIT(1);
|
|
schedule_work(<9611uxc->work);
|
|
}
|
|
|
|
lt9611uxc_unlock(lt9611uxc);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void lt9611uxc_hpd_work(struct work_struct *work)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = container_of(work, struct lt9611uxc, work);
|
|
bool connected;
|
|
|
|
if (lt9611uxc->connector.dev) {
|
|
if (lt9611uxc->connector.dev->mode_config.funcs)
|
|
drm_kms_helper_hotplug_event(lt9611uxc->connector.dev);
|
|
} else {
|
|
|
|
mutex_lock(<9611uxc->ocm_lock);
|
|
connected = lt9611uxc->hdmi_connected;
|
|
mutex_unlock(<9611uxc->ocm_lock);
|
|
|
|
drm_bridge_hpd_notify(<9611uxc->bridge,
|
|
connected ?
|
|
connector_status_connected :
|
|
connector_status_disconnected);
|
|
}
|
|
}
|
|
|
|
static void lt9611uxc_reset(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
gpiod_set_value_cansleep(lt9611uxc->reset_gpio, 1);
|
|
msleep(20);
|
|
|
|
gpiod_set_value_cansleep(lt9611uxc->reset_gpio, 0);
|
|
msleep(20);
|
|
|
|
gpiod_set_value_cansleep(lt9611uxc->reset_gpio, 1);
|
|
msleep(300);
|
|
}
|
|
|
|
static void lt9611uxc_assert_5v(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
if (!lt9611uxc->enable_gpio)
|
|
return;
|
|
|
|
gpiod_set_value_cansleep(lt9611uxc->enable_gpio, 1);
|
|
msleep(20);
|
|
}
|
|
|
|
static int lt9611uxc_regulator_init(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
int ret;
|
|
|
|
lt9611uxc->supplies[0].supply = "vdd";
|
|
lt9611uxc->supplies[1].supply = "vcc";
|
|
|
|
ret = devm_regulator_bulk_get(lt9611uxc->dev, 2, lt9611uxc->supplies);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return regulator_set_load(lt9611uxc->supplies[0].consumer, 200000);
|
|
}
|
|
|
|
static int lt9611uxc_regulator_enable(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_enable(lt9611uxc->supplies[0].consumer);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
usleep_range(1000, 10000); /* 50000 according to dtsi */
|
|
|
|
ret = regulator_enable(lt9611uxc->supplies[1].consumer);
|
|
if (ret < 0) {
|
|
regulator_disable(lt9611uxc->supplies[0].consumer);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct lt9611uxc_mode *lt9611uxc_find_mode(const struct drm_display_mode *mode)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(lt9611uxc_modes); i++) {
|
|
if (lt9611uxc_modes[i].hdisplay == mode->hdisplay &&
|
|
lt9611uxc_modes[i].vdisplay == mode->vdisplay &&
|
|
lt9611uxc_modes[i].vrefresh == drm_mode_vrefresh(mode)) {
|
|
return <9611uxc_modes[i];
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct mipi_dsi_device *lt9611uxc_attach_dsi(struct lt9611uxc *lt9611uxc,
|
|
struct device_node *dsi_node)
|
|
{
|
|
const struct mipi_dsi_device_info info = { "lt9611uxc", 0, NULL };
|
|
struct mipi_dsi_device *dsi;
|
|
struct mipi_dsi_host *host;
|
|
int ret;
|
|
|
|
host = of_find_mipi_dsi_host_by_node(dsi_node);
|
|
if (!host) {
|
|
dev_err(lt9611uxc->dev, "failed to find dsi host\n");
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
|
|
dsi = mipi_dsi_device_register_full(host, &info);
|
|
if (IS_ERR(dsi)) {
|
|
dev_err(lt9611uxc->dev, "failed to create dsi device\n");
|
|
return dsi;
|
|
}
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
|
|
MIPI_DSI_MODE_VIDEO_HSE;
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
dev_err(lt9611uxc->dev, "failed to attach dsi to host\n");
|
|
mipi_dsi_device_unregister(dsi);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
return dsi;
|
|
}
|
|
|
|
static int lt9611uxc_connector_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = connector_to_lt9611uxc(connector);
|
|
unsigned int count;
|
|
struct edid *edid;
|
|
|
|
edid = lt9611uxc->bridge.funcs->get_edid(<9611uxc->bridge, connector);
|
|
drm_connector_update_edid_property(connector, edid);
|
|
count = drm_add_edid_modes(connector, edid);
|
|
kfree(edid);
|
|
|
|
return count;
|
|
}
|
|
|
|
static enum drm_connector_status lt9611uxc_connector_detect(struct drm_connector *connector,
|
|
bool force)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = connector_to_lt9611uxc(connector);
|
|
|
|
return lt9611uxc->bridge.funcs->detect(<9611uxc->bridge);
|
|
}
|
|
|
|
static enum drm_mode_status lt9611uxc_connector_mode_valid(struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct lt9611uxc_mode *lt9611uxc_mode = lt9611uxc_find_mode(mode);
|
|
|
|
return lt9611uxc_mode ? MODE_OK : MODE_BAD;
|
|
}
|
|
|
|
static const struct drm_connector_helper_funcs lt9611uxc_bridge_connector_helper_funcs = {
|
|
.get_modes = lt9611uxc_connector_get_modes,
|
|
.mode_valid = lt9611uxc_connector_mode_valid,
|
|
};
|
|
|
|
static const struct drm_connector_funcs lt9611uxc_bridge_connector_funcs = {
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.detect = lt9611uxc_connector_detect,
|
|
.destroy = drm_connector_cleanup,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
};
|
|
|
|
static int lt9611uxc_connector_init(struct drm_bridge *bridge, struct lt9611uxc *lt9611uxc)
|
|
{
|
|
int ret;
|
|
|
|
if (!bridge->encoder) {
|
|
DRM_ERROR("Parent encoder object not found");
|
|
return -ENODEV;
|
|
}
|
|
|
|
lt9611uxc->connector.polled = DRM_CONNECTOR_POLL_HPD;
|
|
|
|
drm_connector_helper_add(<9611uxc->connector,
|
|
<9611uxc_bridge_connector_helper_funcs);
|
|
ret = drm_connector_init(bridge->dev, <9611uxc->connector,
|
|
<9611uxc_bridge_connector_funcs,
|
|
DRM_MODE_CONNECTOR_HDMIA);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to initialize connector with drm\n");
|
|
return ret;
|
|
}
|
|
|
|
return drm_connector_attach_encoder(<9611uxc->connector, bridge->encoder);
|
|
}
|
|
|
|
static void lt9611uxc_bridge_detach(struct drm_bridge *bridge)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
|
|
|
|
if (lt9611uxc->dsi1) {
|
|
mipi_dsi_detach(lt9611uxc->dsi1);
|
|
mipi_dsi_device_unregister(lt9611uxc->dsi1);
|
|
}
|
|
|
|
mipi_dsi_detach(lt9611uxc->dsi0);
|
|
mipi_dsi_device_unregister(lt9611uxc->dsi0);
|
|
}
|
|
|
|
static int lt9611uxc_bridge_attach(struct drm_bridge *bridge,
|
|
enum drm_bridge_attach_flags flags)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
|
|
int ret;
|
|
|
|
if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
|
|
ret = lt9611uxc_connector_init(bridge, lt9611uxc);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* Attach primary DSI */
|
|
lt9611uxc->dsi0 = lt9611uxc_attach_dsi(lt9611uxc, lt9611uxc->dsi0_node);
|
|
if (IS_ERR(lt9611uxc->dsi0))
|
|
return PTR_ERR(lt9611uxc->dsi0);
|
|
|
|
/* Attach secondary DSI, if specified */
|
|
if (lt9611uxc->dsi1_node) {
|
|
lt9611uxc->dsi1 = lt9611uxc_attach_dsi(lt9611uxc, lt9611uxc->dsi1_node);
|
|
if (IS_ERR(lt9611uxc->dsi1)) {
|
|
ret = PTR_ERR(lt9611uxc->dsi1);
|
|
goto err_unregister_dsi0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unregister_dsi0:
|
|
mipi_dsi_detach(lt9611uxc->dsi0);
|
|
mipi_dsi_device_unregister(lt9611uxc->dsi0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum drm_mode_status
|
|
lt9611uxc_bridge_mode_valid(struct drm_bridge *bridge,
|
|
const struct drm_display_info *info,
|
|
const struct drm_display_mode *mode)
|
|
{
|
|
struct lt9611uxc_mode *lt9611uxc_mode;
|
|
|
|
lt9611uxc_mode = lt9611uxc_find_mode(mode);
|
|
|
|
return lt9611uxc_mode ? MODE_OK : MODE_BAD;
|
|
}
|
|
|
|
static void lt9611uxc_video_setup(struct lt9611uxc *lt9611uxc,
|
|
const struct drm_display_mode *mode)
|
|
{
|
|
u32 h_total, hactive, hsync_len, hfront_porch;
|
|
u32 v_total, vactive, vsync_len, vfront_porch;
|
|
|
|
h_total = mode->htotal;
|
|
v_total = mode->vtotal;
|
|
|
|
hactive = mode->hdisplay;
|
|
hsync_len = mode->hsync_end - mode->hsync_start;
|
|
hfront_porch = mode->hsync_start - mode->hdisplay;
|
|
|
|
vactive = mode->vdisplay;
|
|
vsync_len = mode->vsync_end - mode->vsync_start;
|
|
vfront_porch = mode->vsync_start - mode->vdisplay;
|
|
|
|
regmap_write(lt9611uxc->regmap, 0xd00d, (u8)(v_total / 256));
|
|
regmap_write(lt9611uxc->regmap, 0xd00e, (u8)(v_total % 256));
|
|
|
|
regmap_write(lt9611uxc->regmap, 0xd00f, (u8)(vactive / 256));
|
|
regmap_write(lt9611uxc->regmap, 0xd010, (u8)(vactive % 256));
|
|
|
|
regmap_write(lt9611uxc->regmap, 0xd011, (u8)(h_total / 256));
|
|
regmap_write(lt9611uxc->regmap, 0xd012, (u8)(h_total % 256));
|
|
|
|
regmap_write(lt9611uxc->regmap, 0xd013, (u8)(hactive / 256));
|
|
regmap_write(lt9611uxc->regmap, 0xd014, (u8)(hactive % 256));
|
|
|
|
regmap_write(lt9611uxc->regmap, 0xd015, (u8)(vsync_len % 256));
|
|
|
|
regmap_update_bits(lt9611uxc->regmap, 0xd016, 0xf, (u8)(hsync_len / 256));
|
|
regmap_write(lt9611uxc->regmap, 0xd017, (u8)(hsync_len % 256));
|
|
|
|
regmap_update_bits(lt9611uxc->regmap, 0xd018, 0xf, (u8)(vfront_porch / 256));
|
|
regmap_write(lt9611uxc->regmap, 0xd019, (u8)(vfront_porch % 256));
|
|
|
|
regmap_update_bits(lt9611uxc->regmap, 0xd01a, 0xf, (u8)(hfront_porch / 256));
|
|
regmap_write(lt9611uxc->regmap, 0xd01b, (u8)(hfront_porch % 256));
|
|
}
|
|
|
|
static void lt9611uxc_bridge_mode_set(struct drm_bridge *bridge,
|
|
const struct drm_display_mode *mode,
|
|
const struct drm_display_mode *adj_mode)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
|
|
|
|
lt9611uxc_lock(lt9611uxc);
|
|
lt9611uxc_video_setup(lt9611uxc, mode);
|
|
lt9611uxc_unlock(lt9611uxc);
|
|
}
|
|
|
|
static enum drm_connector_status lt9611uxc_bridge_detect(struct drm_bridge *bridge)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
|
|
unsigned int reg_val = 0;
|
|
int ret;
|
|
bool connected = true;
|
|
|
|
lt9611uxc_lock(lt9611uxc);
|
|
|
|
if (lt9611uxc->hpd_supported) {
|
|
ret = regmap_read(lt9611uxc->regmap, 0xb023, ®_val);
|
|
|
|
if (ret)
|
|
dev_err(lt9611uxc->dev, "failed to read hpd status: %d\n", ret);
|
|
else
|
|
connected = reg_val & BIT(1);
|
|
}
|
|
lt9611uxc->hdmi_connected = connected;
|
|
|
|
lt9611uxc_unlock(lt9611uxc);
|
|
|
|
return connected ? connector_status_connected :
|
|
connector_status_disconnected;
|
|
}
|
|
|
|
static int lt9611uxc_wait_for_edid(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
return wait_event_interruptible_timeout(lt9611uxc->wq, lt9611uxc->edid_read,
|
|
msecs_to_jiffies(500));
|
|
}
|
|
|
|
static int lt9611uxc_get_edid_block(void *data, u8 *buf, unsigned int block, size_t len)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = data;
|
|
int ret;
|
|
|
|
if (len > EDID_BLOCK_SIZE)
|
|
return -EINVAL;
|
|
|
|
if (block >= EDID_NUM_BLOCKS)
|
|
return -EINVAL;
|
|
|
|
lt9611uxc_lock(lt9611uxc);
|
|
|
|
regmap_write(lt9611uxc->regmap, 0xb00b, 0x10);
|
|
|
|
regmap_write(lt9611uxc->regmap, 0xb00a, block * EDID_BLOCK_SIZE);
|
|
|
|
ret = regmap_noinc_read(lt9611uxc->regmap, 0xb0b0, buf, len);
|
|
if (ret)
|
|
dev_err(lt9611uxc->dev, "edid read failed: %d\n", ret);
|
|
|
|
lt9611uxc_unlock(lt9611uxc);
|
|
|
|
return 0;
|
|
};
|
|
|
|
static struct edid *lt9611uxc_bridge_get_edid(struct drm_bridge *bridge,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
|
|
int ret;
|
|
|
|
ret = lt9611uxc_wait_for_edid(lt9611uxc);
|
|
if (ret < 0) {
|
|
dev_err(lt9611uxc->dev, "wait for EDID failed: %d\n", ret);
|
|
return NULL;
|
|
} else if (ret == 0) {
|
|
dev_err(lt9611uxc->dev, "wait for EDID timeout\n");
|
|
return NULL;
|
|
}
|
|
|
|
return drm_do_get_edid(connector, lt9611uxc_get_edid_block, lt9611uxc);
|
|
}
|
|
|
|
static const struct drm_bridge_funcs lt9611uxc_bridge_funcs = {
|
|
.attach = lt9611uxc_bridge_attach,
|
|
.detach = lt9611uxc_bridge_detach,
|
|
.mode_valid = lt9611uxc_bridge_mode_valid,
|
|
.mode_set = lt9611uxc_bridge_mode_set,
|
|
.detect = lt9611uxc_bridge_detect,
|
|
.get_edid = lt9611uxc_bridge_get_edid,
|
|
};
|
|
|
|
static int lt9611uxc_parse_dt(struct device *dev,
|
|
struct lt9611uxc *lt9611uxc)
|
|
{
|
|
lt9611uxc->dsi0_node = of_graph_get_remote_node(dev->of_node, 0, -1);
|
|
if (!lt9611uxc->dsi0_node) {
|
|
dev_err(lt9611uxc->dev, "failed to get remote node for primary dsi\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
lt9611uxc->dsi1_node = of_graph_get_remote_node(dev->of_node, 1, -1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt9611uxc_gpio_init(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
struct device *dev = lt9611uxc->dev;
|
|
|
|
lt9611uxc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(lt9611uxc->reset_gpio)) {
|
|
dev_err(dev, "failed to acquire reset gpio\n");
|
|
return PTR_ERR(lt9611uxc->reset_gpio);
|
|
}
|
|
|
|
lt9611uxc->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
|
|
if (IS_ERR(lt9611uxc->enable_gpio)) {
|
|
dev_err(dev, "failed to acquire enable gpio\n");
|
|
return PTR_ERR(lt9611uxc->enable_gpio);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt9611uxc_read_device_rev(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
unsigned int rev0, rev1, rev2;
|
|
int ret;
|
|
|
|
lt9611uxc_lock(lt9611uxc);
|
|
|
|
ret = regmap_read(lt9611uxc->regmap, 0x8100, &rev0);
|
|
ret |= regmap_read(lt9611uxc->regmap, 0x8101, &rev1);
|
|
ret |= regmap_read(lt9611uxc->regmap, 0x8102, &rev2);
|
|
if (ret)
|
|
dev_err(lt9611uxc->dev, "failed to read revision: %d\n", ret);
|
|
else
|
|
dev_info(lt9611uxc->dev, "LT9611 revision: 0x%02x.%02x.%02x\n", rev0, rev1, rev2);
|
|
|
|
lt9611uxc_unlock(lt9611uxc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611uxc_read_version(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
unsigned int rev;
|
|
int ret;
|
|
|
|
lt9611uxc_lock(lt9611uxc);
|
|
|
|
ret = regmap_read(lt9611uxc->regmap, 0xb021, &rev);
|
|
if (ret)
|
|
dev_err(lt9611uxc->dev, "failed to read revision: %d\n", ret);
|
|
else
|
|
dev_info(lt9611uxc->dev, "LT9611 version: 0x%02x\n", rev);
|
|
|
|
lt9611uxc_unlock(lt9611uxc);
|
|
|
|
return ret < 0 ? ret : rev;
|
|
}
|
|
|
|
static int lt9611uxc_hdmi_hw_params(struct device *dev, void *data,
|
|
struct hdmi_codec_daifmt *fmt,
|
|
struct hdmi_codec_params *hparms)
|
|
{
|
|
/*
|
|
* LT9611UXC will automatically detect rate and sample size, so no need
|
|
* to setup anything here.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static void lt9611uxc_audio_shutdown(struct device *dev, void *data)
|
|
{
|
|
}
|
|
|
|
static int lt9611uxc_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
|
|
struct device_node *endpoint)
|
|
{
|
|
struct of_endpoint of_ep;
|
|
int ret;
|
|
|
|
ret = of_graph_parse_endpoint(endpoint, &of_ep);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* HDMI sound should be located as reg = <2>
|
|
* Then, it is sound port 0
|
|
*/
|
|
if (of_ep.port == 2)
|
|
return 0;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct hdmi_codec_ops lt9611uxc_codec_ops = {
|
|
.hw_params = lt9611uxc_hdmi_hw_params,
|
|
.audio_shutdown = lt9611uxc_audio_shutdown,
|
|
.get_dai_id = lt9611uxc_hdmi_i2s_get_dai_id,
|
|
};
|
|
|
|
static int lt9611uxc_audio_init(struct device *dev, struct lt9611uxc *lt9611uxc)
|
|
{
|
|
struct hdmi_codec_pdata codec_data = {
|
|
.ops = <9611uxc_codec_ops,
|
|
.max_i2s_channels = 2,
|
|
.i2s = 1,
|
|
.data = lt9611uxc,
|
|
};
|
|
|
|
lt9611uxc->audio_pdev =
|
|
platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
|
|
PLATFORM_DEVID_AUTO,
|
|
&codec_data, sizeof(codec_data));
|
|
|
|
return PTR_ERR_OR_ZERO(lt9611uxc->audio_pdev);
|
|
}
|
|
|
|
static void lt9611uxc_audio_exit(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
if (lt9611uxc->audio_pdev) {
|
|
platform_device_unregister(lt9611uxc->audio_pdev);
|
|
lt9611uxc->audio_pdev = NULL;
|
|
}
|
|
}
|
|
|
|
#define LT9611UXC_FW_PAGE_SIZE 32
|
|
static void lt9611uxc_firmware_write_page(struct lt9611uxc *lt9611uxc, u16 addr, const u8 *buf)
|
|
{
|
|
struct reg_sequence seq_write_prepare[] = {
|
|
REG_SEQ0(0x805a, 0x04),
|
|
REG_SEQ0(0x805a, 0x00),
|
|
|
|
REG_SEQ0(0x805e, 0xdf),
|
|
REG_SEQ0(0x805a, 0x20),
|
|
REG_SEQ0(0x805a, 0x00),
|
|
REG_SEQ0(0x8058, 0x21),
|
|
};
|
|
|
|
struct reg_sequence seq_write_addr[] = {
|
|
REG_SEQ0(0x805b, (addr >> 16) & 0xff),
|
|
REG_SEQ0(0x805c, (addr >> 8) & 0xff),
|
|
REG_SEQ0(0x805d, addr & 0xff),
|
|
REG_SEQ0(0x805a, 0x10),
|
|
REG_SEQ0(0x805a, 0x00),
|
|
};
|
|
|
|
regmap_write(lt9611uxc->regmap, 0x8108, 0xbf);
|
|
msleep(20);
|
|
regmap_write(lt9611uxc->regmap, 0x8108, 0xff);
|
|
msleep(20);
|
|
regmap_multi_reg_write(lt9611uxc->regmap, seq_write_prepare, ARRAY_SIZE(seq_write_prepare));
|
|
regmap_noinc_write(lt9611uxc->regmap, 0x8059, buf, LT9611UXC_FW_PAGE_SIZE);
|
|
regmap_multi_reg_write(lt9611uxc->regmap, seq_write_addr, ARRAY_SIZE(seq_write_addr));
|
|
msleep(20);
|
|
}
|
|
|
|
static void lt9611uxc_firmware_read_page(struct lt9611uxc *lt9611uxc, u16 addr, char *buf)
|
|
{
|
|
struct reg_sequence seq_read_page[] = {
|
|
REG_SEQ0(0x805a, 0xa0),
|
|
REG_SEQ0(0x805a, 0x80),
|
|
REG_SEQ0(0x805b, (addr >> 16) & 0xff),
|
|
REG_SEQ0(0x805c, (addr >> 8) & 0xff),
|
|
REG_SEQ0(0x805d, addr & 0xff),
|
|
REG_SEQ0(0x805a, 0x90),
|
|
REG_SEQ0(0x805a, 0x80),
|
|
REG_SEQ0(0x8058, 0x21),
|
|
};
|
|
|
|
regmap_multi_reg_write(lt9611uxc->regmap, seq_read_page, ARRAY_SIZE(seq_read_page));
|
|
regmap_noinc_read(lt9611uxc->regmap, 0x805f, buf, LT9611UXC_FW_PAGE_SIZE);
|
|
}
|
|
|
|
static char *lt9611uxc_firmware_read(struct lt9611uxc *lt9611uxc, size_t size)
|
|
{
|
|
struct reg_sequence seq_read_setup[] = {
|
|
REG_SEQ0(0x805a, 0x84),
|
|
REG_SEQ0(0x805a, 0x80),
|
|
};
|
|
|
|
char *readbuf;
|
|
u16 offset;
|
|
|
|
readbuf = kzalloc(ALIGN(size, 32), GFP_KERNEL);
|
|
if (!readbuf)
|
|
return NULL;
|
|
|
|
regmap_multi_reg_write(lt9611uxc->regmap, seq_read_setup, ARRAY_SIZE(seq_read_setup));
|
|
|
|
for (offset = 0;
|
|
offset < size;
|
|
offset += LT9611UXC_FW_PAGE_SIZE)
|
|
lt9611uxc_firmware_read_page(lt9611uxc, offset, &readbuf[offset]);
|
|
|
|
return readbuf;
|
|
}
|
|
|
|
static int lt9611uxc_firmware_update(struct lt9611uxc *lt9611uxc)
|
|
{
|
|
int ret;
|
|
u16 offset;
|
|
size_t remain;
|
|
char *readbuf;
|
|
const struct firmware *fw;
|
|
|
|
struct reg_sequence seq_setup[] = {
|
|
REG_SEQ0(0x805e, 0xdf),
|
|
REG_SEQ0(0x8058, 0x00),
|
|
REG_SEQ0(0x8059, 0x50),
|
|
REG_SEQ0(0x805a, 0x10),
|
|
REG_SEQ0(0x805a, 0x00),
|
|
};
|
|
|
|
|
|
struct reg_sequence seq_block_erase[] = {
|
|
REG_SEQ0(0x805a, 0x04),
|
|
REG_SEQ0(0x805a, 0x00),
|
|
REG_SEQ0(0x805b, 0x00),
|
|
REG_SEQ0(0x805c, 0x00),
|
|
REG_SEQ0(0x805d, 0x00),
|
|
REG_SEQ0(0x805a, 0x01),
|
|
REG_SEQ0(0x805a, 0x00),
|
|
};
|
|
|
|
ret = request_firmware(&fw, "lt9611uxc_fw.bin", lt9611uxc->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev_info(lt9611uxc->dev, "Updating firmware\n");
|
|
lt9611uxc_lock(lt9611uxc);
|
|
|
|
regmap_multi_reg_write(lt9611uxc->regmap, seq_setup, ARRAY_SIZE(seq_setup));
|
|
|
|
/*
|
|
* Need erase block 2 timess here. Sometimes, block erase can fail.
|
|
* This is a workaroud.
|
|
*/
|
|
regmap_multi_reg_write(lt9611uxc->regmap, seq_block_erase, ARRAY_SIZE(seq_block_erase));
|
|
msleep(3000);
|
|
regmap_multi_reg_write(lt9611uxc->regmap, seq_block_erase, ARRAY_SIZE(seq_block_erase));
|
|
msleep(3000);
|
|
|
|
for (offset = 0, remain = fw->size;
|
|
remain >= LT9611UXC_FW_PAGE_SIZE;
|
|
offset += LT9611UXC_FW_PAGE_SIZE, remain -= LT9611UXC_FW_PAGE_SIZE)
|
|
lt9611uxc_firmware_write_page(lt9611uxc, offset, fw->data + offset);
|
|
|
|
if (remain > 0) {
|
|
char buf[LT9611UXC_FW_PAGE_SIZE];
|
|
|
|
memset(buf, 0xff, LT9611UXC_FW_PAGE_SIZE);
|
|
memcpy(buf, fw->data + offset, remain);
|
|
lt9611uxc_firmware_write_page(lt9611uxc, offset, buf);
|
|
}
|
|
msleep(20);
|
|
|
|
readbuf = lt9611uxc_firmware_read(lt9611uxc, fw->size);
|
|
if (!readbuf) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
if (!memcmp(readbuf, fw->data, fw->size)) {
|
|
dev_err(lt9611uxc->dev, "Firmware update failed\n");
|
|
print_hex_dump(KERN_ERR, "fw: ", DUMP_PREFIX_OFFSET, 16, 1, readbuf, fw->size, false);
|
|
ret = -EINVAL;
|
|
} else {
|
|
dev_info(lt9611uxc->dev, "Firmware updates successfully\n");
|
|
ret = 0;
|
|
}
|
|
kfree(readbuf);
|
|
|
|
out:
|
|
lt9611uxc_unlock(lt9611uxc);
|
|
lt9611uxc_reset(lt9611uxc);
|
|
release_firmware(fw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t lt9611uxc_firmware_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = lt9611uxc_firmware_update(lt9611uxc);
|
|
if (ret < 0)
|
|
return ret;
|
|
return len;
|
|
}
|
|
|
|
static ssize_t lt9611uxc_firmware_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = dev_get_drvdata(dev);
|
|
|
|
return sysfs_emit(buf, "%02x\n", lt9611uxc->fw_version);
|
|
}
|
|
|
|
static DEVICE_ATTR_RW(lt9611uxc_firmware);
|
|
|
|
static struct attribute *lt9611uxc_attrs[] = {
|
|
&dev_attr_lt9611uxc_firmware.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group lt9611uxc_attr_group = {
|
|
.attrs = lt9611uxc_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *lt9611uxc_attr_groups[] = {
|
|
<9611uxc_attr_group,
|
|
NULL,
|
|
};
|
|
|
|
static int lt9611uxc_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct lt9611uxc *lt9611uxc;
|
|
struct device *dev = &client->dev;
|
|
int ret;
|
|
bool fw_updated = false;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
dev_err(dev, "device doesn't support I2C\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
lt9611uxc = devm_kzalloc(dev, sizeof(*lt9611uxc), GFP_KERNEL);
|
|
if (!lt9611uxc)
|
|
return -ENOMEM;
|
|
|
|
lt9611uxc->dev = &client->dev;
|
|
lt9611uxc->client = client;
|
|
mutex_init(<9611uxc->ocm_lock);
|
|
|
|
lt9611uxc->regmap = devm_regmap_init_i2c(client, <9611uxc_regmap_config);
|
|
if (IS_ERR(lt9611uxc->regmap)) {
|
|
dev_err(lt9611uxc->dev, "regmap i2c init failed\n");
|
|
return PTR_ERR(lt9611uxc->regmap);
|
|
}
|
|
|
|
ret = lt9611uxc_parse_dt(&client->dev, lt9611uxc);
|
|
if (ret) {
|
|
dev_err(dev, "failed to parse device tree\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = lt9611uxc_gpio_init(lt9611uxc);
|
|
if (ret < 0)
|
|
goto err_of_put;
|
|
|
|
ret = lt9611uxc_regulator_init(lt9611uxc);
|
|
if (ret < 0)
|
|
goto err_of_put;
|
|
|
|
lt9611uxc_assert_5v(lt9611uxc);
|
|
|
|
ret = lt9611uxc_regulator_enable(lt9611uxc);
|
|
if (ret)
|
|
goto err_of_put;
|
|
|
|
lt9611uxc_reset(lt9611uxc);
|
|
|
|
ret = lt9611uxc_read_device_rev(lt9611uxc);
|
|
if (ret) {
|
|
dev_err(dev, "failed to read chip rev\n");
|
|
goto err_disable_regulators;
|
|
}
|
|
|
|
retry:
|
|
ret = lt9611uxc_read_version(lt9611uxc);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to read FW version\n");
|
|
goto err_disable_regulators;
|
|
} else if (ret == 0) {
|
|
if (!fw_updated) {
|
|
fw_updated = true;
|
|
dev_err(dev, "FW version 0, enforcing firmware update\n");
|
|
ret = lt9611uxc_firmware_update(lt9611uxc);
|
|
if (ret < 0)
|
|
goto err_disable_regulators;
|
|
else
|
|
goto retry;
|
|
} else {
|
|
dev_err(dev, "FW version 0, update failed\n");
|
|
ret = -EOPNOTSUPP;
|
|
goto err_disable_regulators;
|
|
}
|
|
} else if (ret < 0x40) {
|
|
dev_info(dev, "FW version 0x%x, HPD not supported\n", ret);
|
|
} else {
|
|
lt9611uxc->hpd_supported = true;
|
|
}
|
|
lt9611uxc->fw_version = ret;
|
|
|
|
init_waitqueue_head(<9611uxc->wq);
|
|
INIT_WORK(<9611uxc->work, lt9611uxc_hpd_work);
|
|
|
|
ret = devm_request_threaded_irq(dev, client->irq, NULL,
|
|
lt9611uxc_irq_thread_handler,
|
|
IRQF_ONESHOT, "lt9611uxc", lt9611uxc);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request irq\n");
|
|
goto err_disable_regulators;
|
|
}
|
|
|
|
i2c_set_clientdata(client, lt9611uxc);
|
|
|
|
lt9611uxc->bridge.funcs = <9611uxc_bridge_funcs;
|
|
lt9611uxc->bridge.of_node = client->dev.of_node;
|
|
lt9611uxc->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID;
|
|
if (lt9611uxc->hpd_supported)
|
|
lt9611uxc->bridge.ops |= DRM_BRIDGE_OP_HPD;
|
|
lt9611uxc->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
|
|
|
|
drm_bridge_add(<9611uxc->bridge);
|
|
|
|
return lt9611uxc_audio_init(dev, lt9611uxc);
|
|
|
|
err_disable_regulators:
|
|
regulator_bulk_disable(ARRAY_SIZE(lt9611uxc->supplies), lt9611uxc->supplies);
|
|
|
|
err_of_put:
|
|
of_node_put(lt9611uxc->dsi1_node);
|
|
of_node_put(lt9611uxc->dsi0_node);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lt9611uxc_remove(struct i2c_client *client)
|
|
{
|
|
struct lt9611uxc *lt9611uxc = i2c_get_clientdata(client);
|
|
|
|
disable_irq(client->irq);
|
|
cancel_work_sync(<9611uxc->work);
|
|
lt9611uxc_audio_exit(lt9611uxc);
|
|
drm_bridge_remove(<9611uxc->bridge);
|
|
|
|
mutex_destroy(<9611uxc->ocm_lock);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(lt9611uxc->supplies), lt9611uxc->supplies);
|
|
|
|
of_node_put(lt9611uxc->dsi1_node);
|
|
of_node_put(lt9611uxc->dsi0_node);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_device_id lt9611uxc_id[] = {
|
|
{ "lontium,lt9611uxc", 0 },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct of_device_id lt9611uxc_match_table[] = {
|
|
{ .compatible = "lontium,lt9611uxc" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lt9611uxc_match_table);
|
|
|
|
static struct i2c_driver lt9611uxc_driver = {
|
|
.driver = {
|
|
.name = "lt9611uxc",
|
|
.of_match_table = lt9611uxc_match_table,
|
|
.dev_groups = lt9611uxc_attr_groups,
|
|
},
|
|
.probe = lt9611uxc_probe,
|
|
.remove = lt9611uxc_remove,
|
|
.id_table = lt9611uxc_id,
|
|
};
|
|
module_i2c_driver(lt9611uxc_driver);
|
|
|
|
MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
|
|
MODULE_LICENSE("GPL v2");
|