33 lines
1.2 KiB
Plaintext
33 lines
1.2 KiB
Plaintext
* Cadence Universal Flash Storage (UFS) Controller
|
|
|
|
UFS nodes are defined to describe on-chip UFS host controllers.
|
|
Each UFS controller instance should have its own node.
|
|
Please see the ufshcd-pltfrm.txt for a list of all available properties.
|
|
|
|
Required properties:
|
|
- compatible : Compatible list, contains one of the following controllers:
|
|
"cdns,ufshc" - Generic CDNS HCI,
|
|
"cdns,ufshc-m31-16nm" - CDNS UFS HC + M31 16nm PHY
|
|
complemented with the JEDEC version:
|
|
"jedec,ufs-2.0"
|
|
|
|
- reg : Address and length of the UFS register set.
|
|
- interrupts : One interrupt mapping.
|
|
- freq-table-hz : Clock frequency table.
|
|
See the ufshcd-pltfrm.txt for details.
|
|
- clocks : List of phandle and clock specifier pairs.
|
|
- clock-names : List of clock input name strings sorted in the same
|
|
order as the clocks property. "core_clk" is mandatory.
|
|
Depending on a type of a PHY,
|
|
the "phy_clk" clock can also be added, if needed.
|
|
|
|
Example:
|
|
ufs@fd030000 {
|
|
compatible = "cdns,ufshc", "jedec,ufs-2.0";
|
|
reg = <0xfd030000 0x10000>;
|
|
interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
freq-table-hz = <0 0>, <0 0>;
|
|
clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
|
|
clock-names = "core_clk", "phy_clk";
|
|
};
|