43 lines
1.2 KiB
Plaintext
43 lines
1.2 KiB
Plaintext
RT1011 Mono Class D Audio Amplifier
|
|
|
|
This device supports I2C only.
|
|
|
|
Required properties:
|
|
|
|
- compatible : "realtek,rt1011".
|
|
|
|
- reg : The I2C address of the device. This I2C address decide by
|
|
two input pins (ASEL1 and ASEL2).
|
|
-------------------------------------
|
|
| ASEL2 | ASEL1 | Address |
|
|
-------------------------------------
|
|
| 0 | 0 | 0x38 |
|
|
-------------------------------------
|
|
| 0 | 1 | 0x39 |
|
|
-------------------------------------
|
|
| 1 | 0 | 0x3a |
|
|
-------------------------------------
|
|
| 1 | 1 | 0x3b |
|
|
-------------------------------------
|
|
|
|
Optional properties:
|
|
|
|
- realtek,temperature_calib
|
|
u32. The temperature was measured while doing the calibration. Units: Celsius degree
|
|
|
|
- realtek,r0_calib
|
|
u32. This is r0 calibration data which was measured in factory mode.
|
|
|
|
Pins on the device (for linking into audio routes) for RT1011:
|
|
|
|
* SPO
|
|
|
|
Example:
|
|
|
|
rt1011: codec@38 {
|
|
compatible = "realtek,rt1011";
|
|
reg = <0x38>;
|
|
realtek,temperature_calib = <25>;
|
|
realtek,r0_calib = <0x224050>;
|
|
};
|