114 lines
3.3 KiB
Plaintext
114 lines
3.3 KiB
Plaintext
Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device
|
|
|
|
Required properties:
|
|
- compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
|
|
|
|
Optional properties:
|
|
- active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high.
|
|
If this property is missing, assume the VSEL pin is set to logic-low.
|
|
|
|
Optional input supply properties:
|
|
- vp1-supply: The input supply for REG_DCDC1
|
|
- vp2-supply: The input supply for REG_DCDC2
|
|
- vp3-supply: The input supply for REG_DCDC3
|
|
- inl45-supply: The input supply for REG_LDO1 and REG_LDO2
|
|
- inl67-supply: The input supply for REG_LDO3 and REG_LDO4
|
|
|
|
Any standard regulator properties can be used to configure the single regulator.
|
|
regulator-initial-mode, regulator-allowed-modes and regulator-mode could be
|
|
specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h
|
|
file.
|
|
|
|
The valid names for regulators are:
|
|
REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4.
|
|
|
|
Example:
|
|
|
|
#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
|
|
|
|
pmic@5b {
|
|
compatible = "active-semi,act8945a";
|
|
reg = <0x5b>;
|
|
|
|
active-semi,vsel-high;
|
|
|
|
regulators {
|
|
vdd_1v35_reg: REG_DCDC1 {
|
|
regulator-name = "VDD_1V35";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
|
|
regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
|
|
<ACT8945A_REGULATOR_MODE_LOWPOWER>;
|
|
regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-min-microvolt=<1400000>;
|
|
regulator-suspend-max-microvolt=<1400000>;
|
|
regulator-changeable-in-suspend;
|
|
regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
|
|
};
|
|
};
|
|
|
|
vdd_1v2_reg: REG_DCDC2 {
|
|
regulator-name = "VDD_1V2";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
|
|
regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
|
|
<ACT8945A_REGULATOR_MODE_LOWPOWER>;
|
|
regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_3v3_reg: REG_DCDC3 {
|
|
regulator-name = "VDD_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_fuse_reg: REG_LDO1 {
|
|
regulator-name = "VDD_FUSE";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
|
|
regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
|
|
<ACT8945A_REGULATOR_MODE_LOWPOWER>;
|
|
regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_3v3_lp_reg: REG_LDO2 {
|
|
regulator-name = "VDD_3V3_LP";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_led_reg: REG_LDO3 {
|
|
regulator-name = "VDD_LED";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_sdhc_1v8_reg: REG_LDO4 {
|
|
regulator-name = "VDD_SDHC_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|