153 lines
4.8 KiB
YAML
153 lines
4.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. SC8180X TLMM block
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
|
|
description: |
|
|
This binding describes the Top Level Mode Multiplexer block found in the
|
|
SC8180X platform.
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,sc8180x-tlmm
|
|
|
|
reg:
|
|
maxItems: 3
|
|
|
|
reg-names:
|
|
items:
|
|
- const: "west"
|
|
- const: "east"
|
|
- const: "south"
|
|
|
|
interrupts: true
|
|
interrupt-controller: true
|
|
'#interrupt-cells': true
|
|
gpio-controller: true
|
|
gpio-reserved-ranges: true
|
|
'#gpio-cells': true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
'-state$':
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-sc8180x-tlmm-state"
|
|
- patternProperties:
|
|
".*":
|
|
$ref: "#/$defs/qcom-sc8180x-tlmm-state"
|
|
|
|
'$defs':
|
|
qcom-sc8180x-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
|
|
- enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
|
|
minItems: 1
|
|
maxItems: 16
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
|
|
atest_tsens2, atest_usb0, atest_usb1, atest_usb2, atest_usb3,
|
|
atest_usb4, audio_ref, btfm_slimbus, cam_mclk, cci_async,
|
|
cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
|
|
cci_timer4, cci_timer5, cci_timer6, cci_timer7, cci_timer8,
|
|
cci_timer9, cri_trng, dbg_out, ddr_bist, ddr_pxi, debug_hot,
|
|
dp_hot, edp_hot, edp_lcd, emac_phy, emac_pps, gcc_gp1, gcc_gp2,
|
|
gcc_gp3, gcc_gp4, gcc_gp5, gpio, gps, grfc, hs1_mi2s, hs2_mi2s,
|
|
hs3_mi2s, jitter_bist, lpass_slimbus, m_voc, mdp_vsync,
|
|
mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4,
|
|
mdp_vsync5, mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1,
|
|
pci_e2, pci_e3, phase_flag, pll_bist, pll_bypassnl, pll_reset,
|
|
pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss_gpio, qlink,
|
|
qspi0, qspi0_clk, qspi0_cs, qspi1, qspi1_clk, qspi1_cs,
|
|
qua_mi2s, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
|
|
qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
|
|
qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, sd_write, sdc4,
|
|
sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu,
|
|
tsense_pwm1, tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
|
|
usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger,
|
|
wlan1_adc, wlan2_adc, wmss_reset ]
|
|
|
|
bias-disable: true
|
|
bias-pull-down: true
|
|
bias-pull-up: true
|
|
drive-strength: true
|
|
input-enable: true
|
|
output-high: true
|
|
output-low: true
|
|
|
|
required:
|
|
- pins
|
|
- function
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
pinctrl@3100000 {
|
|
compatible = "qcom,sc8180x-tlmm";
|
|
reg = <0x03100000 0x300000>,
|
|
<0x03500000 0x700000>,
|
|
<0x03d00000 0x300000>;
|
|
reg-names = "west", "east", "south";
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&tlmm 0 0 190>;
|
|
|
|
gpio-wo-subnode-state {
|
|
pins = "gpio1";
|
|
function = "gpio";
|
|
};
|
|
|
|
uart-w-subnodes-state {
|
|
rx {
|
|
pins = "gpio4";
|
|
function = "qup6";
|
|
bias-pull-up;
|
|
};
|
|
|
|
tx {
|
|
pins = "gpio5";
|
|
function = "qup6";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
...
|