49 lines
1.7 KiB
Plaintext
49 lines
1.7 KiB
Plaintext
* Marvell Armada 7K/8K PCIe interface
|
|
|
|
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
|
and thus inherits all the common properties defined in snps,dw-pcie.yaml.
|
|
|
|
Required properties:
|
|
- compatible: "marvell,armada8k-pcie"
|
|
- reg: must contain two register regions
|
|
- the control register region
|
|
- the config space region
|
|
- reg-names:
|
|
- "ctrl" for the control register region
|
|
- "config" for the config space region
|
|
- interrupts: Interrupt specifier for the PCIe controller
|
|
- clocks: reference to the PCIe controller clocks
|
|
- clock-names: mandatory if there is a second clock, in this case the
|
|
name must be "core" for the first clock and "reg" for the second
|
|
one
|
|
|
|
Optional properties:
|
|
- phys: phandle(s) to PHY node(s) following the generic PHY bindings.
|
|
Either 1, 2 or 4 PHYs might be needed depending on the number of
|
|
PCIe lanes.
|
|
- phy-names: names of the PHYs corresponding to the number of lanes.
|
|
Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
|
|
2 PHYs.
|
|
|
|
Example:
|
|
|
|
pcie@f2600000 {
|
|
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
|
|
reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>;
|
|
reg-names = "ctrl", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
device_type = "pci";
|
|
dma-coherent;
|
|
|
|
bus-range = <0 0xff>;
|
|
ranges = <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 /* downstream I/O */
|
|
0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; /* non-prefetchable memory */
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
num-lanes = <1>;
|
|
clocks = <&cpm_syscon0 1 13>;
|
|
};
|