80 lines
1.8 KiB
YAML
80 lines
1.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title:
|
|
Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree
|
|
bindings
|
|
|
|
maintainers:
|
|
- Marc Kleine-Budde <mkl@pengutronix.de>
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- const: microchip,mcp2517fd
|
|
description: for MCP2517FD
|
|
- const: microchip,mcp2518fd
|
|
description: for MCP2518FD
|
|
- const: microchip,mcp251xfd
|
|
description: to autodetect chip variant
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
vdd-supply:
|
|
description: Regulator that powers the CAN controller.
|
|
|
|
xceiver-supply:
|
|
description: Regulator that powers the CAN transceiver.
|
|
|
|
microchip,rx-int-gpios:
|
|
description:
|
|
GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which
|
|
signals a pending RX interrupt.
|
|
maxItems: 1
|
|
|
|
spi-max-frequency:
|
|
description:
|
|
Must be half or less of "clocks" frequency.
|
|
maximum: 20000000
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
spi0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
can@0 {
|
|
compatible = "microchip,mcp251xfd";
|
|
reg = <0>;
|
|
clocks = <&can0_osc>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&can0_pins>;
|
|
spi-max-frequency = <20000000>;
|
|
interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;
|
|
microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
|
|
vdd-supply = <®5v0>;
|
|
xceiver-supply = <®5v0>;
|
|
};
|
|
};
|