54 lines
1.3 KiB
Plaintext
54 lines
1.3 KiB
Plaintext
* BROADCOM BRCMSTB/BMIPS SDHCI Controller
|
|
|
|
This file documents differences between the core properties in mmc.txt
|
|
and the properties used by the sdhci-brcmstb driver.
|
|
|
|
NOTE: The driver disables all UHS speed modes by default and depends
|
|
on Device Tree properties to enable them for SoC/Board combinations
|
|
that support them.
|
|
|
|
Required properties:
|
|
- compatible: should be one of the following
|
|
- "brcm,bcm7425-sdhci"
|
|
- "brcm,bcm7445-sdhci"
|
|
- "brcm,bcm7216-sdhci"
|
|
|
|
Refer to clocks/clock-bindings.txt for generic clock consumer properties.
|
|
|
|
Example:
|
|
|
|
sdhci@84b0000 {
|
|
sd-uhs-sdr50;
|
|
sd-uhs-ddr50;
|
|
sd-uhs-sdr104;
|
|
sdhci,auto-cmd12;
|
|
compatible = "brcm,bcm7216-sdhci",
|
|
"brcm,bcm7445-sdhci",
|
|
"brcm,sdhci-brcmstb";
|
|
reg = <0x84b0000 0x260 0x84b0300 0x200>;
|
|
reg-names = "host", "cfg";
|
|
interrupts = <0x0 0x26 0x4>;
|
|
interrupt-names = "sdio0_0";
|
|
clocks = <&scmi_clk 245>;
|
|
clock-names = "sw_sdio";
|
|
};
|
|
|
|
sdhci@84b1000 {
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
supports-cqe;
|
|
non-removable;
|
|
bus-width = <0x8>;
|
|
compatible = "brcm,bcm7216-sdhci",
|
|
"brcm,bcm7445-sdhci",
|
|
"brcm,sdhci-brcmstb";
|
|
reg = <0x84b1000 0x260 0x84b1300 0x200>;
|
|
reg-names = "host", "cfg";
|
|
interrupts = <0x0 0x27 0x4>;
|
|
interrupt-names = "sdio1_0";
|
|
clocks = <&scmi_clk 245>;
|
|
clock-names = "sw_sdio";
|
|
};
|