143 lines
3.5 KiB
YAML
143 lines
3.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/leds/backlight/lm3630a-backlight.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: TI LM3630A High-Efficiency Dual-String White LED
|
|
|
|
maintainers:
|
|
- Lee Jones <lee.jones@linaro.org>
|
|
- Daniel Thompson <daniel.thompson@linaro.org>
|
|
- Jingoo Han <jingoohan1@gmail.com>
|
|
|
|
description: |
|
|
The LM3630A is a current-mode boost converter which supplies the power and
|
|
controls the current in up to two strings of 10 LEDs per string.
|
|
https://www.ti.com/product/LM3630A
|
|
|
|
properties:
|
|
compatible:
|
|
const: ti,lm3630a
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
'#address-cells':
|
|
const: 1
|
|
|
|
'#size-cells':
|
|
const: 0
|
|
|
|
enable-gpios:
|
|
description: GPIO to use to enable/disable the backlight (HWEN pin).
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- '#address-cells'
|
|
- '#size-cells'
|
|
|
|
patternProperties:
|
|
"^led@[01]$":
|
|
type: object
|
|
description: |
|
|
Properties for a string of connected LEDs.
|
|
|
|
properties:
|
|
reg:
|
|
description: |
|
|
The control bank that is used to program the two current sinks. The
|
|
LM3630A has two control banks (A and B) and are represented as 0 or 1
|
|
in this property. The two current sinks can be controlled
|
|
independently with both banks, or bank A can be configured to control
|
|
both sinks with the led-sources property.
|
|
minimum: 0
|
|
maximum: 1
|
|
|
|
label:
|
|
maxItems: 1
|
|
|
|
led-sources:
|
|
allOf:
|
|
- minItems: 1
|
|
maxItems: 2
|
|
items:
|
|
minimum: 0
|
|
maximum: 1
|
|
|
|
default-brightness:
|
|
description: Default brightness level on boot.
|
|
minimum: 0
|
|
maximum: 255
|
|
|
|
max-brightness:
|
|
description: Maximum brightness that is allowed during runtime.
|
|
minimum: 0
|
|
maximum: 255
|
|
|
|
ti,linear-mapping-mode:
|
|
description: |
|
|
Enable linear mapping mode. If disabled, then it will use exponential
|
|
mapping mode in which the ramp up/down appears to have a more uniform
|
|
transition to the human eye.
|
|
type: boolean
|
|
|
|
required:
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led-controller@38 {
|
|
compatible = "ti,lm3630a";
|
|
reg = <0x38>;
|
|
enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
led-sources = <0 1>;
|
|
label = "lcd-backlight";
|
|
default-brightness = <200>;
|
|
max-brightness = <255>;
|
|
};
|
|
};
|
|
};
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led-controller@38 {
|
|
compatible = "ti,lm3630a";
|
|
reg = <0x38>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
default-brightness = <150>;
|
|
ti,linear-mapping-mode;
|
|
};
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
default-brightness = <225>;
|
|
ti,linear-mapping-mode;
|
|
};
|
|
};
|
|
};
|