101 lines
2.8 KiB
Plaintext
101 lines
2.8 KiB
Plaintext
* Nuvoton NPCM7XX Clock Controller
|
|
|
|
Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
|
|
generates and supplies clocks to all modules within the BMC.
|
|
|
|
External clocks:
|
|
|
|
There are six fixed clocks that are generated outside the BMC. All clocks are of
|
|
a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
|
|
clk_sysbypck are inputs to the clock controller.
|
|
clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
|
|
network. They are set on the device tree, but not used by the clock module. The
|
|
network devices use them directly.
|
|
Example can be found below.
|
|
|
|
All available clocks are defined as preprocessor macros in:
|
|
dt-bindings/clock/nuvoton,npcm7xx-clock.h
|
|
and can be reused as DT sources.
|
|
|
|
Required Properties of clock controller:
|
|
|
|
- compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
|
|
Poleg BMC NPCM750
|
|
|
|
- reg: physical base address of the clock controller and length of
|
|
memory mapped region.
|
|
|
|
- #clock-cells: should be 1.
|
|
|
|
Example: Clock controller node:
|
|
|
|
clk: clock-controller@f0801000 {
|
|
compatible = "nuvoton,npcm750-clk";
|
|
#clock-cells = <1>;
|
|
reg = <0xf0801000 0x1000>;
|
|
clock-names = "refclk", "sysbypck", "mcbypck";
|
|
clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
|
|
};
|
|
|
|
Example: Required external clocks for network:
|
|
|
|
/* external reference clock */
|
|
clk_refclk: clk-refclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
clock-output-names = "refclk";
|
|
};
|
|
|
|
/* external reference clock for cpu. float in normal operation */
|
|
clk_sysbypck: clk-sysbypck {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <800000000>;
|
|
clock-output-names = "sysbypck";
|
|
};
|
|
|
|
/* external reference clock for MC. float in normal operation */
|
|
clk_mcbypck: clk-mcbypck {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <800000000>;
|
|
clock-output-names = "mcbypck";
|
|
};
|
|
|
|
/* external clock signal rg1refck, supplied by the phy */
|
|
clk_rg1refck: clk-rg1refck {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "clk_rg1refck";
|
|
};
|
|
|
|
/* external clock signal rg2refck, supplied by the phy */
|
|
clk_rg2refck: clk-rg2refck {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "clk_rg2refck";
|
|
};
|
|
|
|
clk_xin: clk-xin {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <50000000>;
|
|
clock-output-names = "clk_xin";
|
|
};
|
|
|
|
|
|
Example: GMAC controller node that consumes two clocks: a generated clk by the
|
|
clock controller and a fixed clock from DT (clk_rg1refck).
|
|
|
|
ethernet0: ethernet@f0802000 {
|
|
compatible = "snps,dwmac";
|
|
reg = <0xf0802000 0x2000>;
|
|
interrupts = <0 14 4>;
|
|
interrupt-names = "macirq";
|
|
clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
|
|
clock-names = "stmmaceth", "clk_gmac";
|
|
};
|