1537 lines
58 KiB
Plaintext
1537 lines
58 KiB
Plaintext
What: /sys/bus/*/drivers/ufshcd/*/auto_hibern8
|
|
Date: March 2018
|
|
Contact: linux-scsi@vger.kernel.org
|
|
Description:
|
|
This file contains the auto-hibernate idle timer setting of a
|
|
UFS host controller. A value of '0' means auto-hibernate is not
|
|
enabled. Otherwise the value is the number of microseconds of
|
|
idle time before the UFS host controller will autonomously put
|
|
the link into hibernate state. That will save power at the
|
|
expense of increased latency. Note that the hardware supports
|
|
10-bit values with a power-of-ten multiplier which allows a
|
|
maximum value of 102300000. Refer to the UFS Host Controller
|
|
Interface specification for more details.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device type. This is one of the UFS
|
|
device descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device class. This is one of the UFS
|
|
device descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the UFS storage subclass. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the protocol supported by an UFS device.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows number of logical units. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows number of well known logical units.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows value that indicates whether the device is
|
|
enabled for boot. This is one of the UFS device descriptor
|
|
parameters. The full information about the descriptor could
|
|
be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows value that indicates whether the device
|
|
descriptor could be read after partial initialization phase
|
|
of the boot sequence. This is one of the UFS device descriptor
|
|
parameters. The full information about the descriptor could
|
|
be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows value that defines the power mode after
|
|
device initialization or hardware reset. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the high priority lun. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the secure removal type. This is one of
|
|
the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the security lun is supported.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the background operations termination
|
|
latency. This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the initial active ICC level. This is one
|
|
of the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the specification version. This is one
|
|
of the UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the manufacturing date in BCD format.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the manufacturer ID. This is one of the
|
|
UFS device descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of outstanding RTTs
|
|
supported by the device. This is one of the UFS device
|
|
descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the frequency and method of the realtime
|
|
clock update. This is one of the UFS device descriptor
|
|
parameters. The full information about the descriptor
|
|
could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows which features are supported by the device.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be
|
|
found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the FFU timeout. This is one of the
|
|
UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device queue depth. This is one of the
|
|
UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device version. This is one of the
|
|
UFS device descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows number of secure write protect areas
|
|
supported by the device. This is one of the UFS device
|
|
descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum amount of data that may be
|
|
written during the pre-soldering phase of the PSA flow.
|
|
This is one of the UFS device descriptor parameters.
|
|
The full information about the descriptor could be found
|
|
at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the command maximum timeout for a change
|
|
in PSA state. This is one of the UFS device descriptor
|
|
parameters. The full information about the descriptor could
|
|
be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the MIPI UniPro version number in BCD format.
|
|
This is one of the UFS interconnect descriptor parameters.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the MIPI M-PHY version number in BCD format.
|
|
This is one of the UFS interconnect descriptor parameters.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the total memory quantity available to
|
|
the user to configure the device logical units. This is one
|
|
of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of logical units
|
|
supported by the UFS device. This is one of the UFS
|
|
geometry descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the segment size. This is one of the UFS
|
|
geometry descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the allocation unit size. This is one of
|
|
the UFS geometry descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the minimum addressable block size. This
|
|
is one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the optimal read block size. This is one
|
|
of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the optimal write block size. This is one
|
|
of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum data-in buffer size. This
|
|
is one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum data-out buffer size. This
|
|
is one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at UFS
|
|
specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of RPMB frames allowed
|
|
in Security Protocol In/Out. This is one of the UFS geometry
|
|
descriptor parameters. The full information about the
|
|
descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the dynamic capacity resource policy. This
|
|
is one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows support for out-of-order data transfer.
|
|
This is one of the UFS geometry descriptor parameters.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows maximum available number of contexts which
|
|
are supported by the device. This is one of the UFS geometry
|
|
descriptor parameters. The full information about the
|
|
descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows system data tag unit size. This is one of
|
|
the UFS geometry descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows maximum storage area size allocated by
|
|
the device to handle system data by the tagging mechanism.
|
|
This is one of the UFS geometry descriptor parameters.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows supported secure removal types. This is
|
|
one of the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows supported memory types. This is one of
|
|
the UFS geometry descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of allocation units for
|
|
different memory types (system code, non persistent,
|
|
enhanced type 1-4). This is one of the UFS geometry
|
|
descriptor parameters. The full information about the
|
|
descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the memory capacity adjustment factor for
|
|
different memory types (system code, non persistent,
|
|
enhanced type 1-4). This is one of the UFS geometry
|
|
descriptor parameters. The full information about the
|
|
descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows preend of life information. This is one
|
|
of the UFS health descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows indication of the device life time
|
|
(method a). This is one of the UFS health descriptor
|
|
parameters. The full information about the descriptor
|
|
could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows indication of the device life time
|
|
(method b). This is one of the UFS health descriptor
|
|
parameters. The full information about the descriptor
|
|
could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc*
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows maximum VCC, VCCQ and VCCQ2 value for
|
|
active ICC levels from 0 to 15. This is one of the UFS
|
|
power descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a device manufacturer name string.
|
|
The full information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a product name string. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a OEM ID string. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a device serial number string. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file contains a product revision string. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/boot_lun_id
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows boot LUN information. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows LUN write protection status. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows LUN queue depth. This is one of the UFS
|
|
unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows PSA sensitivity. This is one of the UFS
|
|
unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows LUN memory type. This is one of the UFS
|
|
unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file defines the device behavior when a power failure
|
|
occurs during a write operation. This is one of the UFS
|
|
unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the size of addressable logical blocks
|
|
(calculated as an exponent with base 2). This is one of
|
|
the UFS unit descriptor parameters. The full information about
|
|
the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows total number of addressable logical blocks.
|
|
This is one of the UFS unit descriptor parameters. The full
|
|
information about the descriptor could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the erase block size. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the thin provisioning type. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the total physical memory resources. This is
|
|
one of the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the context capabilities. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the granularity of the LUN. This is one of
|
|
the UFS unit descriptor parameters. The full information
|
|
about the descriptor could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the device init status. The full information
|
|
about the flag could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether permanent write protection is enabled.
|
|
The full information about the flag could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether write protection is enabled on all
|
|
logical units configured as power on write protected. The
|
|
full information about the flag could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the device background operations are
|
|
enabled. The full information about the flag could be
|
|
found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the device life span mode is enabled.
|
|
The full information about the flag could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether physical resource removal is enable.
|
|
The full information about the flag could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the device is executing internal
|
|
operation related to real time clock. The full information
|
|
about the flag could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the device FW update is permanently
|
|
disabled. The full information about the flag could be found
|
|
at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the boot lun enabled UFS device attribute.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the current power mode UFS device attribute.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the active icc level UFS device attribute.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the out of order data transfer enabled UFS
|
|
device attribute. The full information about the attribute
|
|
could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the background operations status UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the purge operation status UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum data size in a DATA IN
|
|
UPIU. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the maximum number of bytes that can be
|
|
requested with a READY TO TRANSFER UPIU. The full information
|
|
about the attribute could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the reference clock frequency UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows whether the configuration descriptor is locked.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1. The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the maximum current number of
|
|
outstanding RTTs in device that is allowed. The full
|
|
information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the exception event control UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the exception event status UFS device
|
|
attribute. The full information about the attribute could
|
|
be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file provides the ffu status UFS device attribute.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file show the PSA feature status. The full information
|
|
about the attribute could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the amount of data that the host plans to
|
|
load to all logical units in pre-soldering state.
|
|
The full information about the attribute could be found at
|
|
UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/class/scsi_device/*/device/dyn_cap_needed
|
|
Date: February 2018
|
|
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
|
|
Description: This file shows the The amount of physical memory needed
|
|
to be removed from the physical memory resources pool of
|
|
the particular logical unit. The full information about
|
|
the attribute could be found at UFS specifications 2.1.
|
|
|
|
The file is read only.
|
|
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl
|
|
Date: September 2014
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry could be used to set or show the UFS device
|
|
runtime power management level. The current driver
|
|
implementation supports 7 levels with next target states:
|
|
|
|
== ====================================================
|
|
0 UFS device will stay active, UIC link will
|
|
stay active
|
|
1 UFS device will stay active, UIC link will
|
|
hibernate
|
|
2 UFS device will be moved to sleep, UIC link will
|
|
stay active
|
|
3 UFS device will be moved to sleep, UIC link will
|
|
hibernate
|
|
4 UFS device will be powered off, UIC link will
|
|
hibernate
|
|
5 UFS device will be powered off, UIC link will
|
|
be powered off
|
|
6 UFS device will be moved to deep sleep, UIC link
|
|
will be powered off. Note, deep sleep might not be
|
|
supported in which case this value will not be
|
|
accepted
|
|
== ====================================================
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
|
|
Date: February 2018
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry shows the target power mode of an UFS device
|
|
for the chosen runtime power management level.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
|
|
Date: February 2018
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry shows the target state of an UFS UIC link
|
|
for the chosen runtime power management level.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl
|
|
Date: September 2014
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry could be used to set or show the UFS device
|
|
system power management level. The current driver
|
|
implementation supports 7 levels with next target states:
|
|
|
|
== ====================================================
|
|
0 UFS device will stay active, UIC link will
|
|
stay active
|
|
1 UFS device will stay active, UIC link will
|
|
hibernate
|
|
2 UFS device will be moved to sleep, UIC link will
|
|
stay active
|
|
3 UFS device will be moved to sleep, UIC link will
|
|
hibernate
|
|
4 UFS device will be powered off, UIC link will
|
|
hibernate
|
|
5 UFS device will be powered off, UIC link will
|
|
be powered off
|
|
6 UFS device will be moved to deep sleep, UIC link
|
|
will be powered off. Note, deep sleep might not be
|
|
supported in which case this value will not be
|
|
accepted
|
|
== ====================================================
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
|
|
Date: February 2018
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry shows the target power mode of an UFS device
|
|
for the chosen system power management level.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
|
|
Date: February 2018
|
|
Contact: Subhash Jadavani <subhashj@codeaurora.org>
|
|
Description: This entry shows the target state of an UFS UIC link
|
|
for the chosen system power management level.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows the status of performance monitor enablement
|
|
and it can be used to start/stop the monitor. When the monitor
|
|
is stopped, the performance data collected is also cleared.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file tells the monitor to focus on requests transferring
|
|
data of specific chunk size (in Bytes). 0 means any chunk size.
|
|
It can only be changed when monitor is disabled.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows how many sectors (in 512 Bytes) have been
|
|
sent from device to host after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows how long (in micro seconds) has been spent
|
|
sending data from device to host after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows how many read requests have been sent after
|
|
monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows the maximum latency (in micro seconds) of
|
|
read requests after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows the minimum latency (in micro seconds) of
|
|
read requests after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows the average latency (in micro seconds) of
|
|
read requests after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows the total latency (in micro seconds) of
|
|
read requests sent after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows how many sectors (in 512 Bytes) have been sent
|
|
from host to device after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows how long (in micro seconds) has been spent
|
|
sending data from host to device after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows how many write requests have been sent after
|
|
monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows the maximum latency (in micro seconds) of write
|
|
requests after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows the minimum latency (in micro seconds) of write
|
|
requests after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows the average latency (in micro seconds) of write
|
|
requests after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
|
|
Date: January 2021
|
|
Contact: Can Guo <cang@codeaurora.org>
|
|
Description: This file shows the total latency (in micro seconds) of write
|
|
requests after monitor gets started.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows if preserve user-space was configured
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the shared allocated units of WB buffer
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the configured WB type.
|
|
0x1 for shared buffer mode. 0x0 for dedicated buffer mode.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the total user-space decrease in shared
|
|
buffer mode.
|
|
The value of this parameter is 3 for TLC NAND when SLC mode
|
|
is used as WriteBooster Buffer. 2 for MLC NAND.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the Maximum total WriteBooster Buffer size
|
|
which is supported by the entire device.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the maximum number of luns that can support
|
|
WriteBooster.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: The supportability of user space reduction mode
|
|
and preserve user space mode.
|
|
00h: WriteBooster Buffer can be configured only in
|
|
user space reduction type.
|
|
01h: WriteBooster Buffer can be configured only in
|
|
preserve user space type.
|
|
02h: Device can be configured in either user space
|
|
reduction type or preserve user space type.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: The supportability of WriteBooster Buffer type.
|
|
|
|
=== ==========================================================
|
|
00h LU based WriteBooster Buffer configuration
|
|
01h Single shared WriteBooster Buffer configuration
|
|
02h Supporting both LU based WriteBooster.
|
|
Buffer and Single shared WriteBooster Buffer configuration
|
|
=== ==========================================================
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the status of WriteBooster.
|
|
|
|
== ============================
|
|
0 WriteBooster is not enabled.
|
|
1 WriteBooster is enabled
|
|
== ============================
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows if flush is enabled.
|
|
|
|
== =================================
|
|
0 Flush operation is not performed.
|
|
1 Flush operation is performed.
|
|
== =================================
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: Flush WriteBooster Buffer during hibernate state.
|
|
|
|
== =================================================
|
|
0 Device is not allowed to flush the
|
|
WriteBooster Buffer during link hibernate state.
|
|
1 Device is allowed to flush the
|
|
WriteBooster Buffer during link hibernate state.
|
|
== =================================================
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the amount of unused WriteBooster buffer
|
|
available.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the amount of unused current buffer.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the flush operation status.
|
|
|
|
|
|
=== ======================================
|
|
00h idle
|
|
01h Flush operation in progress
|
|
02h Flush operation stopped prematurely.
|
|
03h Flush operation completed successfully
|
|
04h Flush operation general failure
|
|
=== ======================================
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows an indication of the WriteBooster Buffer
|
|
lifetime based on the amount of performed program/erase cycles
|
|
|
|
=== =============================================
|
|
01h 0% - 10% WriteBooster Buffer life time used
|
|
...
|
|
0Ah 90% - 100% WriteBooster Buffer life time used
|
|
=== =============================================
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units
|
|
Date: June 2020
|
|
Contact: Asutosh Das <asutoshd@codeaurora.org>
|
|
Description: This entry shows the configured size of WriteBooster buffer.
|
|
0400h corresponds to 4GB.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/wb_on
|
|
Date: January 2021
|
|
Contact: Bean Huo <beanhuo@micron.com>
|
|
Description: This node is used to set or display whether UFS WriteBooster is
|
|
enabled. Echo 0 to this file to disable UFS WriteBooster or 1 to
|
|
enable it. The WriteBooster is enabled after power-on/reset,
|
|
however, it will be disabled/enable while CLK scaling down/up
|
|
(if the platform supports UFSHCD_CAP_CLK_SCALING). For a
|
|
platform that doesn't support UFSHCD_CAP_CLK_SCALING, we can
|
|
disable/enable WriteBooster through this sysfs node.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_version
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the HPB specification version.
|
|
The full information about the descriptor can be found in the UFS
|
|
HPB (Host Performance Booster) Extension specifications.
|
|
Example: version 1.2.3 = 0123h
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_control
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows an indication of the HPB control mode.
|
|
00h: Host control mode
|
|
01h: Device control mode
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_region_size
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the bHPBRegionSize which can be calculated
|
|
as in the following (in bytes):
|
|
HPB Region size = 512B * 2^bHPBRegionSize
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_number_lu
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the maximum number of HPB LU supported by
|
|
the device.
|
|
00h: HPB is not supported by the device.
|
|
01h ~ 20h: Maximum number of HPB LU supported by the device
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_subregion_size
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the bHPBSubRegionSize, which can be
|
|
calculated as in the following (in bytes) and shall be a multiple of
|
|
logical block size:
|
|
HPB Sub-Region size = 512B x 2^bHPBSubRegionSize
|
|
bHPBSubRegionSize shall not exceed bHPBRegionSize.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_max_active_regions
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the maximum number of active HPB regions that
|
|
is supported by the device.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/hpb_lu_max_active_regions
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the maximum number of HPB regions assigned to
|
|
the HPB logical unit.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/hpb_pinned_region_start_offset
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the start offset of HPB pinned region.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/unit_descriptor/hpb_number_pinned_regions
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the number of HPB pinned regions assigned to
|
|
the HPB logical unit.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_stats/hit_cnt
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the number of reads that changed to HPB read.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_stats/miss_cnt
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the number of reads that cannot be changed to
|
|
HPB read.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_stats/rb_noti_cnt
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the number of response UPIUs that has
|
|
recommendations for activating sub-regions and/or inactivating region.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_stats/rb_active_cnt
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the number of active sub-regions recommended by
|
|
response UPIUs.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_stats/rb_inactive_cnt
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the number of inactive regions recommended by
|
|
response UPIUs.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_stats/map_req_cnt
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the number of read buffer commands for
|
|
activating sub-regions recommended by response UPIUs.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_params/requeue_timeout_ms
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the requeue timeout threshold for write buffer
|
|
command in ms. The value can be changed by writing an integer to
|
|
this entry.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_size_hpb_single_cmd
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the maximum HPB data size for using a single HPB
|
|
command.
|
|
|
|
=== ========
|
|
00h 4KB
|
|
01h 8KB
|
|
02h 12KB
|
|
...
|
|
FFh 1024KB
|
|
=== ========
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/bus/platform/drivers/ufshcd/*/flags/hpb_enable
|
|
Date: June 2021
|
|
Contact: Daejun Park <daejun7.park@samsung.com>
|
|
Description: This entry shows the status of HPB.
|
|
|
|
== ============================
|
|
0 HPB is not enabled.
|
|
1 HPB is enabled
|
|
== ============================
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_param_sysfs/activation_thld
|
|
Date: February 2021
|
|
Contact: Avri Altman <avri.altman@wdc.com>
|
|
Description: In host control mode, reads are the major source of activation
|
|
trials. Once this threshold hs met, the region is added to the
|
|
"to-be-activated" list. Since we reset the read counter upon
|
|
write, this include sending a rb command updating the region
|
|
ppn as well.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_param_sysfs/normalization_factor
|
|
Date: February 2021
|
|
Contact: Avri Altman <avri.altman@wdc.com>
|
|
Description: In host control mode, we think of the regions as "buckets".
|
|
Those buckets are being filled with reads, and emptied on write.
|
|
We use entries_per_srgn - the amount of blocks in a subregion as
|
|
our bucket size. This applies because HPB1.0 only handles
|
|
single-block reads. Once the bucket size is crossed, we trigger
|
|
a normalization work - not only to avoid overflow, but mainly
|
|
because we want to keep those counters normalized, as we are
|
|
using those reads as a comparative score, to make various decisions.
|
|
The normalization is dividing (shift right) the read counter by
|
|
the normalization_factor. If during consecutive normalizations
|
|
an active region has exhausted its reads - inactivate it.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_param_sysfs/eviction_thld_enter
|
|
Date: February 2021
|
|
Contact: Avri Altman <avri.altman@wdc.com>
|
|
Description: Region deactivation is often due to the fact that eviction took
|
|
place: A region becomes active at the expense of another. This is
|
|
happening when the max-active-regions limit has been crossed.
|
|
In host mode, eviction is considered an extreme measure. We
|
|
want to verify that the entering region has enough reads, and
|
|
the exiting region has much fewer reads. eviction_thld_enter is
|
|
the min reads that a region must have in order to be considered
|
|
a candidate for evicting another region.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_param_sysfs/eviction_thld_exit
|
|
Date: February 2021
|
|
Contact: Avri Altman <avri.altman@wdc.com>
|
|
Description: Same as above for the exiting region. A region is considered to
|
|
be a candidate for eviction only if it has fewer reads than
|
|
eviction_thld_exit.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_param_sysfs/read_timeout_ms
|
|
Date: February 2021
|
|
Contact: Avri Altman <avri.altman@wdc.com>
|
|
Description: In order not to hang on to "cold" regions, we inactivate
|
|
a region that has no READ access for a predefined amount of
|
|
time - read_timeout_ms. If read_timeout_ms has expired, and the
|
|
region is dirty, it is less likely that we can make any use of
|
|
HPB reading it so we inactivate it. Still, deactivation has
|
|
its overhead, and we may still benefit from HPB reading this
|
|
region if it is clean - see read_timeout_expiries.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_param_sysfs/read_timeout_expiries
|
|
Date: February 2021
|
|
Contact: Avri Altman <avri.altman@wdc.com>
|
|
Description: If the region read timeout has expired, but the region is clean,
|
|
just re-wind its timer for another spin. Do that as long as it
|
|
is clean and did not exhaust its read_timeout_expiries threshold.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_param_sysfs/timeout_polling_interval_ms
|
|
Date: February 2021
|
|
Contact: Avri Altman <avri.altman@wdc.com>
|
|
Description: The frequency with which the delayed worker that checks the
|
|
read_timeouts is awakened.
|
|
|
|
What: /sys/class/scsi_device/*/device/hpb_param_sysfs/inflight_map_req
|
|
Date: February 2021
|
|
Contact: Avri Altman <avri.altman@wdc.com>
|
|
Description: In host control mode the host is the originator of map requests.
|
|
To avoid flooding the device with map requests, use a simple throttling
|
|
mechanism that limits the number of inflight map requests.
|