614 lines
14 KiB
C
614 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* AM33XX Power Management Routines
|
|
*
|
|
* Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Vaibhav Bedia, Dave Gerlach
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/err.h>
|
|
#include <linux/genalloc.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-consumer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_data/pm33xx.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/rtc/rtc-omap.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/sram.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/ti-emif-sram.h>
|
|
#include <linux/wkup_m3_ipc.h>
|
|
|
|
#include <asm/proc-fns.h>
|
|
#include <asm/suspend.h>
|
|
#include <asm/system_misc.h>
|
|
|
|
#define AMX3_PM_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
|
|
(unsigned long)pm_sram->do_wfi)
|
|
|
|
#define RTC_SCRATCH_RESUME_REG 0
|
|
#define RTC_SCRATCH_MAGIC_REG 1
|
|
#define RTC_REG_BOOT_MAGIC 0x8cd0 /* RTC */
|
|
#define GIC_INT_SET_PENDING_BASE 0x200
|
|
#define AM43XX_GIC_DIST_BASE 0x48241000
|
|
|
|
static void __iomem *rtc_base_virt;
|
|
static struct clk *rtc_fck;
|
|
static u32 rtc_magic_val;
|
|
|
|
static int (*am33xx_do_wfi_sram)(unsigned long unused);
|
|
static phys_addr_t am33xx_do_wfi_sram_phys;
|
|
|
|
static struct gen_pool *sram_pool, *sram_pool_data;
|
|
static unsigned long ocmcram_location, ocmcram_location_data;
|
|
|
|
static struct rtc_device *omap_rtc;
|
|
static void __iomem *gic_dist_base;
|
|
|
|
static struct am33xx_pm_platform_data *pm_ops;
|
|
static struct am33xx_pm_sram_addr *pm_sram;
|
|
|
|
static struct device *pm33xx_dev;
|
|
static struct wkup_m3_ipc *m3_ipc;
|
|
|
|
#ifdef CONFIG_SUSPEND
|
|
static int rtc_only_idle;
|
|
static int retrigger_irq;
|
|
static unsigned long suspend_wfi_flags;
|
|
|
|
static struct wkup_m3_wakeup_src wakeup_src = {.irq_nr = 0,
|
|
.src = "Unknown",
|
|
};
|
|
|
|
static struct wkup_m3_wakeup_src rtc_alarm_wakeup = {
|
|
.irq_nr = 108, .src = "RTC Alarm",
|
|
};
|
|
|
|
static struct wkup_m3_wakeup_src rtc_ext_wakeup = {
|
|
.irq_nr = 0, .src = "Ext wakeup",
|
|
};
|
|
#endif
|
|
|
|
static u32 sram_suspend_address(unsigned long addr)
|
|
{
|
|
return ((unsigned long)am33xx_do_wfi_sram +
|
|
AMX3_PM_SRAM_SYMBOL_OFFSET(addr));
|
|
}
|
|
|
|
static int am33xx_push_sram_idle(void)
|
|
{
|
|
struct am33xx_pm_ro_sram_data ro_sram_data;
|
|
int ret;
|
|
u32 table_addr, ro_data_addr;
|
|
void *copy_addr;
|
|
|
|
ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
|
|
ro_sram_data.amx3_pm_sram_data_phys =
|
|
gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
|
|
ro_sram_data.rtc_base_virt = rtc_base_virt;
|
|
|
|
/* Save physical address to calculate resume offset during pm init */
|
|
am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
|
|
ocmcram_location);
|
|
|
|
am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location,
|
|
pm_sram->do_wfi,
|
|
*pm_sram->do_wfi_sz);
|
|
if (!am33xx_do_wfi_sram) {
|
|
dev_err(pm33xx_dev,
|
|
"PM: %s: am33xx_do_wfi copy to sram failed\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
table_addr =
|
|
sram_suspend_address((unsigned long)pm_sram->emif_sram_table);
|
|
ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr);
|
|
if (ret) {
|
|
dev_dbg(pm33xx_dev,
|
|
"PM: %s: EMIF function copy failed\n", __func__);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
ro_data_addr =
|
|
sram_suspend_address((unsigned long)pm_sram->ro_sram_data);
|
|
copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr,
|
|
&ro_sram_data,
|
|
sizeof(ro_sram_data));
|
|
if (!copy_addr) {
|
|
dev_err(pm33xx_dev,
|
|
"PM: %s: ro_sram_data copy to sram failed\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int am33xx_do_sram_idle(u32 wfi_flags)
|
|
{
|
|
if (!m3_ipc || !pm_ops)
|
|
return 0;
|
|
|
|
if (wfi_flags & WFI_FLAG_WAKE_M3)
|
|
m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_IDLE);
|
|
|
|
return pm_ops->cpu_suspend(am33xx_do_wfi_sram, wfi_flags);
|
|
}
|
|
|
|
static int __init am43xx_map_gic(void)
|
|
{
|
|
gic_dist_base = ioremap(AM43XX_GIC_DIST_BASE, SZ_4K);
|
|
|
|
if (!gic_dist_base)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SUSPEND
|
|
static struct wkup_m3_wakeup_src rtc_wake_src(void)
|
|
{
|
|
u32 i;
|
|
|
|
i = __raw_readl(rtc_base_virt + 0x44) & 0x40;
|
|
|
|
if (i) {
|
|
retrigger_irq = rtc_alarm_wakeup.irq_nr;
|
|
return rtc_alarm_wakeup;
|
|
}
|
|
|
|
retrigger_irq = rtc_ext_wakeup.irq_nr;
|
|
|
|
return rtc_ext_wakeup;
|
|
}
|
|
|
|
static int am33xx_rtc_only_idle(unsigned long wfi_flags)
|
|
{
|
|
omap_rtc_power_off_program(&omap_rtc->dev);
|
|
am33xx_do_wfi_sram(wfi_flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Note that the RTC module clock must be re-enabled only for rtc+ddr suspend.
|
|
* And looks like the module can stay in SYSC_IDLE_SMART_WKUP mode configured
|
|
* by the interconnect code just fine for both rtc+ddr suspend and retention
|
|
* suspend.
|
|
*/
|
|
static int am33xx_pm_suspend(suspend_state_t suspend_state)
|
|
{
|
|
int i, ret = 0;
|
|
|
|
if (suspend_state == PM_SUSPEND_MEM &&
|
|
pm_ops->check_off_mode_enable()) {
|
|
ret = clk_prepare_enable(rtc_fck);
|
|
if (ret) {
|
|
dev_err(pm33xx_dev, "Failed to enable clock: %i\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pm_ops->save_context();
|
|
suspend_wfi_flags |= WFI_FLAG_RTC_ONLY;
|
|
clk_save_context();
|
|
ret = pm_ops->soc_suspend(suspend_state, am33xx_rtc_only_idle,
|
|
suspend_wfi_flags);
|
|
|
|
suspend_wfi_flags &= ~WFI_FLAG_RTC_ONLY;
|
|
dev_info(pm33xx_dev, "Entering RTC Only mode with DDR in self-refresh\n");
|
|
|
|
if (!ret) {
|
|
clk_restore_context();
|
|
pm_ops->restore_context();
|
|
m3_ipc->ops->set_rtc_only(m3_ipc);
|
|
am33xx_push_sram_idle();
|
|
}
|
|
} else {
|
|
ret = pm_ops->soc_suspend(suspend_state, am33xx_do_wfi_sram,
|
|
suspend_wfi_flags);
|
|
}
|
|
|
|
if (ret) {
|
|
dev_err(pm33xx_dev, "PM: Kernel suspend failure\n");
|
|
} else {
|
|
i = m3_ipc->ops->request_pm_status(m3_ipc);
|
|
|
|
switch (i) {
|
|
case 0:
|
|
dev_info(pm33xx_dev,
|
|
"PM: Successfully put all powerdomains to target state\n");
|
|
break;
|
|
case 1:
|
|
dev_err(pm33xx_dev,
|
|
"PM: Could not transition all powerdomains to target state\n");
|
|
ret = -1;
|
|
break;
|
|
default:
|
|
dev_err(pm33xx_dev,
|
|
"PM: CM3 returned unknown result = %d\n", i);
|
|
ret = -1;
|
|
}
|
|
|
|
/* print the wakeup reason */
|
|
if (rtc_only_idle) {
|
|
wakeup_src = rtc_wake_src();
|
|
pr_info("PM: Wakeup source %s\n", wakeup_src.src);
|
|
} else {
|
|
pr_info("PM: Wakeup source %s\n",
|
|
m3_ipc->ops->request_wake_src(m3_ipc));
|
|
}
|
|
}
|
|
|
|
if (suspend_state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable())
|
|
clk_disable_unprepare(rtc_fck);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int am33xx_pm_enter(suspend_state_t suspend_state)
|
|
{
|
|
int ret = 0;
|
|
|
|
switch (suspend_state) {
|
|
case PM_SUSPEND_MEM:
|
|
case PM_SUSPEND_STANDBY:
|
|
ret = am33xx_pm_suspend(suspend_state);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int am33xx_pm_begin(suspend_state_t state)
|
|
{
|
|
int ret = -EINVAL;
|
|
struct nvmem_device *nvmem;
|
|
|
|
if (state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) {
|
|
nvmem = devm_nvmem_device_get(&omap_rtc->dev,
|
|
"omap_rtc_scratch0");
|
|
if (!IS_ERR(nvmem))
|
|
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
|
|
(void *)&rtc_magic_val);
|
|
rtc_only_idle = 1;
|
|
} else {
|
|
rtc_only_idle = 0;
|
|
}
|
|
|
|
pm_ops->begin_suspend();
|
|
|
|
switch (state) {
|
|
case PM_SUSPEND_MEM:
|
|
ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
|
|
break;
|
|
case PM_SUSPEND_STANDBY:
|
|
ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_STANDBY);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void am33xx_pm_end(void)
|
|
{
|
|
u32 val = 0;
|
|
struct nvmem_device *nvmem;
|
|
|
|
nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0");
|
|
if (IS_ERR(nvmem))
|
|
return;
|
|
|
|
m3_ipc->ops->finish_low_power(m3_ipc);
|
|
if (rtc_only_idle) {
|
|
if (retrigger_irq) {
|
|
/*
|
|
* 32 bits of Interrupt Set-Pending correspond to 32
|
|
* 32 interrupts. Compute the bit offset of the
|
|
* Interrupt and set that particular bit
|
|
* Compute the register offset by dividing interrupt
|
|
* number by 32 and mutiplying by 4
|
|
*/
|
|
writel_relaxed(1 << (retrigger_irq & 31),
|
|
gic_dist_base + GIC_INT_SET_PENDING_BASE
|
|
+ retrigger_irq / 32 * 4);
|
|
}
|
|
|
|
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
|
|
(void *)&val);
|
|
}
|
|
|
|
rtc_only_idle = 0;
|
|
|
|
pm_ops->finish_suspend();
|
|
}
|
|
|
|
static int am33xx_pm_valid(suspend_state_t state)
|
|
{
|
|
switch (state) {
|
|
case PM_SUSPEND_STANDBY:
|
|
case PM_SUSPEND_MEM:
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static const struct platform_suspend_ops am33xx_pm_ops = {
|
|
.begin = am33xx_pm_begin,
|
|
.end = am33xx_pm_end,
|
|
.enter = am33xx_pm_enter,
|
|
.valid = am33xx_pm_valid,
|
|
};
|
|
#endif /* CONFIG_SUSPEND */
|
|
|
|
static void am33xx_pm_set_ipc_ops(void)
|
|
{
|
|
u32 resume_address;
|
|
int temp;
|
|
|
|
temp = ti_emif_get_mem_type();
|
|
if (temp < 0) {
|
|
dev_err(pm33xx_dev, "PM: Cannot determine memory type, no PM available\n");
|
|
return;
|
|
}
|
|
m3_ipc->ops->set_mem_type(m3_ipc, temp);
|
|
|
|
/* Physical resume address to be used by ROM code */
|
|
resume_address = am33xx_do_wfi_sram_phys +
|
|
*pm_sram->resume_offset + 0x4;
|
|
|
|
m3_ipc->ops->set_resume_address(m3_ipc, (void *)resume_address);
|
|
}
|
|
|
|
static void am33xx_pm_free_sram(void)
|
|
{
|
|
gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
|
|
gen_pool_free(sram_pool_data, ocmcram_location_data,
|
|
sizeof(struct am33xx_pm_ro_sram_data));
|
|
}
|
|
|
|
/*
|
|
* Push the minimal suspend-resume code to SRAM
|
|
*/
|
|
static int am33xx_pm_alloc_sram(void)
|
|
{
|
|
struct device_node *np;
|
|
int ret = 0;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
|
|
if (!np) {
|
|
np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
|
|
if (!np) {
|
|
dev_err(pm33xx_dev, "PM: %s: Unable to find device node for mpu\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
sram_pool = of_gen_pool_get(np, "pm-sram", 0);
|
|
if (!sram_pool) {
|
|
dev_err(pm33xx_dev, "PM: %s: Unable to get sram pool for ocmcram\n",
|
|
__func__);
|
|
ret = -ENODEV;
|
|
goto mpu_put_node;
|
|
}
|
|
|
|
sram_pool_data = of_gen_pool_get(np, "pm-sram", 1);
|
|
if (!sram_pool_data) {
|
|
dev_err(pm33xx_dev, "PM: %s: Unable to get sram data pool for ocmcram\n",
|
|
__func__);
|
|
ret = -ENODEV;
|
|
goto mpu_put_node;
|
|
}
|
|
|
|
ocmcram_location = gen_pool_alloc(sram_pool, *pm_sram->do_wfi_sz);
|
|
if (!ocmcram_location) {
|
|
dev_err(pm33xx_dev, "PM: %s: Unable to allocate memory from ocmcram\n",
|
|
__func__);
|
|
ret = -ENOMEM;
|
|
goto mpu_put_node;
|
|
}
|
|
|
|
ocmcram_location_data = gen_pool_alloc(sram_pool_data,
|
|
sizeof(struct emif_regs_amx3));
|
|
if (!ocmcram_location_data) {
|
|
dev_err(pm33xx_dev, "PM: Unable to allocate memory from ocmcram\n");
|
|
gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
|
|
ret = -ENOMEM;
|
|
}
|
|
|
|
mpu_put_node:
|
|
of_node_put(np);
|
|
return ret;
|
|
}
|
|
|
|
static int am33xx_pm_rtc_setup(void)
|
|
{
|
|
struct device_node *np;
|
|
unsigned long val = 0;
|
|
struct nvmem_device *nvmem;
|
|
int error;
|
|
|
|
np = of_find_node_by_name(NULL, "rtc");
|
|
|
|
if (of_device_is_available(np)) {
|
|
/* RTC interconnect target module clock */
|
|
rtc_fck = of_clk_get_by_name(np->parent, "fck");
|
|
if (IS_ERR(rtc_fck))
|
|
return PTR_ERR(rtc_fck);
|
|
|
|
rtc_base_virt = of_iomap(np, 0);
|
|
if (!rtc_base_virt) {
|
|
pr_warn("PM: could not iomap rtc");
|
|
error = -ENODEV;
|
|
goto err_clk_put;
|
|
}
|
|
|
|
omap_rtc = rtc_class_open("rtc0");
|
|
if (!omap_rtc) {
|
|
pr_warn("PM: rtc0 not available");
|
|
error = -EPROBE_DEFER;
|
|
goto err_iounmap;
|
|
}
|
|
|
|
nvmem = devm_nvmem_device_get(&omap_rtc->dev,
|
|
"omap_rtc_scratch0");
|
|
if (!IS_ERR(nvmem)) {
|
|
nvmem_device_read(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
|
|
4, (void *)&rtc_magic_val);
|
|
if ((rtc_magic_val & 0xffff) != RTC_REG_BOOT_MAGIC)
|
|
pr_warn("PM: bootloader does not support rtc-only!\n");
|
|
|
|
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
|
|
4, (void *)&val);
|
|
val = pm_sram->resume_address;
|
|
nvmem_device_write(nvmem, RTC_SCRATCH_RESUME_REG * 4,
|
|
4, (void *)&val);
|
|
}
|
|
} else {
|
|
pr_warn("PM: no-rtc available, rtc-only mode disabled.\n");
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_iounmap:
|
|
iounmap(rtc_base_virt);
|
|
err_clk_put:
|
|
clk_put(rtc_fck);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int am33xx_pm_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
if (!of_machine_is_compatible("ti,am33xx") &&
|
|
!of_machine_is_compatible("ti,am43"))
|
|
return -ENODEV;
|
|
|
|
pm_ops = dev->platform_data;
|
|
if (!pm_ops) {
|
|
dev_err(dev, "PM: Cannot get core PM ops!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = am43xx_map_gic();
|
|
if (ret) {
|
|
pr_err("PM: Could not ioremap GIC base\n");
|
|
return ret;
|
|
}
|
|
|
|
pm_sram = pm_ops->get_sram_addrs();
|
|
if (!pm_sram) {
|
|
dev_err(dev, "PM: Cannot get PM asm function addresses!!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
m3_ipc = wkup_m3_ipc_get();
|
|
if (!m3_ipc) {
|
|
pr_err("PM: Cannot get wkup_m3_ipc handle\n");
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
pm33xx_dev = dev;
|
|
|
|
ret = am33xx_pm_alloc_sram();
|
|
if (ret)
|
|
goto err_wkup_m3_ipc_put;
|
|
|
|
ret = am33xx_pm_rtc_setup();
|
|
if (ret)
|
|
goto err_free_sram;
|
|
|
|
ret = am33xx_push_sram_idle();
|
|
if (ret)
|
|
goto err_unsetup_rtc;
|
|
|
|
am33xx_pm_set_ipc_ops();
|
|
|
|
#ifdef CONFIG_SUSPEND
|
|
suspend_set_ops(&am33xx_pm_ops);
|
|
|
|
/*
|
|
* For a system suspend we must flush the caches, we want
|
|
* the DDR in self-refresh, we want to save the context
|
|
* of the EMIF, and we want the wkup_m3 to handle low-power
|
|
* transition.
|
|
*/
|
|
suspend_wfi_flags |= WFI_FLAG_FLUSH_CACHE;
|
|
suspend_wfi_flags |= WFI_FLAG_SELF_REFRESH;
|
|
suspend_wfi_flags |= WFI_FLAG_SAVE_EMIF;
|
|
suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
|
|
#endif /* CONFIG_SUSPEND */
|
|
|
|
pm_runtime_enable(dev);
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(dev);
|
|
goto err_pm_runtime_disable;
|
|
}
|
|
|
|
ret = pm_ops->init(am33xx_do_sram_idle);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to call core pm init!\n");
|
|
ret = -ENODEV;
|
|
goto err_pm_runtime_put;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_pm_runtime_put:
|
|
pm_runtime_put_sync(dev);
|
|
err_pm_runtime_disable:
|
|
pm_runtime_disable(dev);
|
|
err_unsetup_rtc:
|
|
iounmap(rtc_base_virt);
|
|
clk_put(rtc_fck);
|
|
err_free_sram:
|
|
am33xx_pm_free_sram();
|
|
pm33xx_dev = NULL;
|
|
err_wkup_m3_ipc_put:
|
|
wkup_m3_ipc_put(m3_ipc);
|
|
return ret;
|
|
}
|
|
|
|
static int am33xx_pm_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
if (pm_ops->deinit)
|
|
pm_ops->deinit();
|
|
suspend_set_ops(NULL);
|
|
wkup_m3_ipc_put(m3_ipc);
|
|
am33xx_pm_free_sram();
|
|
iounmap(rtc_base_virt);
|
|
clk_put(rtc_fck);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver am33xx_pm_driver = {
|
|
.driver = {
|
|
.name = "pm33xx",
|
|
},
|
|
.probe = am33xx_pm_probe,
|
|
.remove = am33xx_pm_remove,
|
|
};
|
|
module_platform_driver(am33xx_pm_driver);
|
|
|
|
MODULE_ALIAS("platform:pm33xx");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("am33xx power management driver");
|