kernel/drivers/mmc/host/sdhci-pci-gli.c
2024-07-22 17:22:30 +08:00

987 lines
28 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Genesys Logic, Inc.
*
* Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
*
* Version: v0.9.0 (2019-08-08)
*/
#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/pci.h>
#include <linux/mmc/mmc.h>
#include <linux/delay.h>
#include <linux/of.h>
#include "sdhci.h"
#include "sdhci-pci.h"
#include "cqhci.h"
/* Genesys Logic extra registers */
#define SDHCI_GLI_9750_WT 0x800
#define SDHCI_GLI_9750_WT_EN BIT(0)
#define GLI_9750_WT_EN_ON 0x1
#define GLI_9750_WT_EN_OFF 0x0
#define PCI_GLI_9750_PM_CTRL 0xFC
#define PCI_GLI_9750_PM_STATE GENMASK(1, 0)
#define PCI_GLI_9750_CORRERR_MASK 0x214
#define PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT BIT(12)
#define SDHCI_GLI_9750_CFG2 0x848
#define SDHCI_GLI_9750_CFG2_L1DLY GENMASK(28, 24)
#define GLI_9750_CFG2_L1DLY_VALUE 0x1F
#define SDHCI_GLI_9750_DRIVING 0x860
#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0)
#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26)
#define GLI_9750_DRIVING_1_VALUE 0xFFF
#define GLI_9750_DRIVING_2_VALUE 0x3
#define SDHCI_GLI_9750_SEL_1 BIT(29)
#define SDHCI_GLI_9750_SEL_2 BIT(31)
#define SDHCI_GLI_9750_ALL_RST (BIT(24)|BIT(25)|BIT(28)|BIT(30))
#define SDHCI_GLI_9750_PLL 0x864
#define SDHCI_GLI_9750_PLL_LDIV GENMASK(9, 0)
#define SDHCI_GLI_9750_PLL_PDIV GENMASK(14, 12)
#define SDHCI_GLI_9750_PLL_DIR BIT(15)
#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23)
#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20)
#define GLI_9750_PLL_TX2_INV_VALUE 0x1
#define GLI_9750_PLL_TX2_DLY_VALUE 0x0
#define SDHCI_GLI_9750_PLLSSC_STEP GENMASK(28, 24)
#define SDHCI_GLI_9750_PLLSSC_EN BIT(31)
#define SDHCI_GLI_9750_PLLSSC 0x86C
#define SDHCI_GLI_9750_PLLSSC_PPM GENMASK(31, 16)
#define SDHCI_GLI_9750_SW_CTRL 0x874
#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6)
#define GLI_9750_SW_CTRL_4_VALUE 0x3
#define SDHCI_GLI_9750_MISC 0x878
#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2)
#define SDHCI_GLI_9750_MISC_RX_INV BIT(3)
#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4)
#define GLI_9750_MISC_TX1_INV_VALUE 0x0
#define GLI_9750_MISC_RX_INV_ON 0x1
#define GLI_9750_MISC_RX_INV_OFF 0x0
#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF
#define GLI_9750_MISC_TX1_DLY_VALUE 0x5
#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4)
#define GLI_9750_TUNING_CONTROL_EN_ON 0x1
#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16)
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19)
#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1
#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2
#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
#define SDHCI_GLI_9763E_CTRL_HS400 0x7
#define SDHCI_GLI_9763E_HS400_ES_REG 0x52C
#define SDHCI_GLI_9763E_HS400_ES_BIT BIT(8)
#define PCIE_GLI_9763E_VHS 0x884
#define GLI_9763E_VHS_REV GENMASK(19, 16)
#define GLI_9763E_VHS_REV_R 0x0
#define GLI_9763E_VHS_REV_M 0x1
#define GLI_9763E_VHS_REV_W 0x2
#define PCIE_GLI_9763E_MB 0x888
#define GLI_9763E_MB_CMDQ_OFF BIT(19)
#define GLI_9763E_MB_ERP_ON BIT(7)
#define PCIE_GLI_9763E_SCR 0x8E0
#define GLI_9763E_SCR_AXI_REQ BIT(9)
#define PCIE_GLI_9763E_CFG2 0x8A4
#define GLI_9763E_CFG2_L1DLY GENMASK(28, 19)
#define GLI_9763E_CFG2_L1DLY_MID 0x54
#define PCIE_GLI_9763E_MMC_CTRL 0x960
#define GLI_9763E_HS400_SLOW BIT(3)
#define PCIE_GLI_9763E_CLKRXDLY 0x934
#define GLI_9763E_HS400_RXDLY GENMASK(31, 28)
#define GLI_9763E_HS400_RXDLY_5 0x5
#define SDHCI_GLI_9763E_CQE_BASE_ADDR 0x200
#define GLI_9763E_CQE_TRNS_MODE (SDHCI_TRNS_MULTI | \
SDHCI_TRNS_BLK_CNT_EN | \
SDHCI_TRNS_DMA)
#define PCI_GLI_9755_WT 0x800
#define PCI_GLI_9755_WT_EN BIT(0)
#define GLI_9755_WT_EN_ON 0x1
#define GLI_9755_WT_EN_OFF 0x0
#define PCI_GLI_9755_PECONF 0x44
#define PCI_GLI_9755_LFCLK GENMASK(14, 12)
#define PCI_GLI_9755_DMACLK BIT(29)
#define PCI_GLI_9755_INVERT_CD BIT(30)
#define PCI_GLI_9755_INVERT_WP BIT(31)
#define PCI_GLI_9755_CFG2 0x48
#define PCI_GLI_9755_CFG2_L1DLY GENMASK(28, 24)
#define GLI_9755_CFG2_L1DLY_VALUE 0x1F
#define PCI_GLI_9755_PLL 0x64
#define PCI_GLI_9755_PLL_LDIV GENMASK(9, 0)
#define PCI_GLI_9755_PLL_PDIV GENMASK(14, 12)
#define PCI_GLI_9755_PLL_DIR BIT(15)
#define PCI_GLI_9755_PLLSSC_STEP GENMASK(28, 24)
#define PCI_GLI_9755_PLLSSC_EN BIT(31)
#define PCI_GLI_9755_PLLSSC 0x68
#define PCI_GLI_9755_PLLSSC_PPM GENMASK(15, 0)
#define PCI_GLI_9755_SerDes 0x70
#define PCI_GLI_9755_SCP_DIS BIT(19)
#define GLI_MAX_TUNING_LOOP 40
/* Genesys Logic chipset */
static inline void gl9750_wt_on(struct sdhci_host *host)
{
u32 wt_value;
u32 wt_enable;
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
if (wt_enable == GLI_9750_WT_EN_ON)
return;
wt_value &= ~SDHCI_GLI_9750_WT_EN;
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON);
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
}
static inline void gl9750_wt_off(struct sdhci_host *host)
{
u32 wt_value;
u32 wt_enable;
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
if (wt_enable == GLI_9750_WT_EN_OFF)
return;
wt_value &= ~SDHCI_GLI_9750_WT_EN;
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF);
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
}
static void gli_set_9750(struct sdhci_host *host)
{
u32 driving_value;
u32 pll_value;
u32 sw_ctrl_value;
u32 misc_value;
u32 parameter_value;
u32 control_value;
u16 ctrl2;
gl9750_wt_on(host);
driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
driving_value &= ~(SDHCI_GLI_9750_DRIVING_1);
driving_value &= ~(SDHCI_GLI_9750_DRIVING_2);
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1,
GLI_9750_DRIVING_1_VALUE);
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
GLI_9750_DRIVING_2_VALUE);
driving_value &= ~(SDHCI_GLI_9750_SEL_1|SDHCI_GLI_9750_SEL_2|SDHCI_GLI_9750_ALL_RST);
driving_value |= SDHCI_GLI_9750_SEL_2;
sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4,
GLI_9750_SW_CTRL_4_VALUE);
sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
/* reset the tuning flow after reinit and before starting tuning */
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV;
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY;
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV,
GLI_9750_PLL_TX2_INV_VALUE);
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY,
GLI_9750_PLL_TX2_DLY_VALUE);
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV;
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY;
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV,
GLI_9750_MISC_TX1_INV_VALUE);
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
GLI_9750_MISC_RX_INV_VALUE);
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY,
GLI_9750_MISC_TX1_DLY_VALUE);
parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY;
parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY,
GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE);
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1;
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2;
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1,
GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE);
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2,
GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE);
sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
/* disable tuned clk */
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
/* enable tuning parameters control */
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
GLI_9750_TUNING_CONTROL_EN_ON);
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
/* write tuning parameters */
sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
/* disable tuning parameters control */
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
GLI_9750_TUNING_CONTROL_EN_OFF);
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
/* clear tuned clk */
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
gl9750_wt_off(host);
}
static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
{
u32 misc_value;
gl9750_wt_on(host);
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
if (b) {
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
GLI_9750_MISC_RX_INV_ON);
} else {
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
GLI_9750_MISC_RX_INV_OFF);
}
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
gl9750_wt_off(host);
}
static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
{
int i;
int rx_inv;
for (rx_inv = 0; rx_inv < 2; rx_inv++) {
gli_set_9750_rx_inv(host, !!rx_inv);
sdhci_start_tuning(host);
for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
u16 ctrl;
sdhci_send_tuning(host, opcode);
if (!host->tuning_done) {
sdhci_abort_tuning(host, opcode);
break;
}
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
if (ctrl & SDHCI_CTRL_TUNED_CLK)
return 0; /* Success! */
break;
}
}
}
if (!host->tuning_done) {
pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
return -ETIMEDOUT;
}
pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
sdhci_reset_tuning(host);
return -EAGAIN;
}
static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
{
host->mmc->retune_period = 0;
if (host->tuning_mode == SDHCI_TUNING_MODE_1)
host->mmc->retune_period = host->tuning_count;
gli_set_9750(host);
host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
sdhci_end_tuning(host);
return 0;
}
static void gl9750_disable_ssc_pll(struct sdhci_host *host)
{
u32 pll;
gl9750_wt_on(host);
pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
pll &= ~(SDHCI_GLI_9750_PLL_DIR | SDHCI_GLI_9750_PLLSSC_EN);
sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
gl9750_wt_off(host);
}
static void gl9750_set_pll(struct sdhci_host *host, u8 dir, u16 ldiv, u8 pdiv)
{
u32 pll;
gl9750_wt_on(host);
pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
pll &= ~(SDHCI_GLI_9750_PLL_LDIV |
SDHCI_GLI_9750_PLL_PDIV |
SDHCI_GLI_9750_PLL_DIR);
pll |= FIELD_PREP(SDHCI_GLI_9750_PLL_LDIV, ldiv) |
FIELD_PREP(SDHCI_GLI_9750_PLL_PDIV, pdiv) |
FIELD_PREP(SDHCI_GLI_9750_PLL_DIR, dir);
sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
gl9750_wt_off(host);
/* wait for pll stable */
mdelay(1);
}
static void gl9750_set_ssc(struct sdhci_host *host, u8 enable, u8 step, u16 ppm)
{
u32 pll;
u32 ssc;
gl9750_wt_on(host);
pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
ssc = sdhci_readl(host, SDHCI_GLI_9750_PLLSSC);
pll &= ~(SDHCI_GLI_9750_PLLSSC_STEP |
SDHCI_GLI_9750_PLLSSC_EN);
ssc &= ~SDHCI_GLI_9750_PLLSSC_PPM;
pll |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_STEP, step) |
FIELD_PREP(SDHCI_GLI_9750_PLLSSC_EN, enable);
ssc |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_PPM, ppm);
sdhci_writel(host, ssc, SDHCI_GLI_9750_PLLSSC);
sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
gl9750_wt_off(host);
}
static void gl9750_set_ssc_pll_205mhz(struct sdhci_host *host)
{
/* set pll to 205MHz and enable ssc */
gl9750_set_ssc(host, 0x1, 0x1F, 0xFFE7);
gl9750_set_pll(host, 0x1, 0x246, 0x0);
}
static void sdhci_gl9750_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct mmc_ios *ios = &host->mmc->ios;
u16 clk;
host->mmc->actual_clock = 0;
gl9750_disable_ssc_pll(host);
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
return;
clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
host->mmc->actual_clock = 205000000;
gl9750_set_ssc_pll_205mhz(host);
}
sdhci_enable_clk(host, clk);
}
static void gl9750_hw_setting(struct sdhci_host *host)
{
struct sdhci_pci_slot *slot = sdhci_priv(host);
struct pci_dev *pdev;
u32 value;
pdev = slot->chip->pdev;
gl9750_wt_on(host);
value = sdhci_readl(host, SDHCI_GLI_9750_CFG2);
value &= ~SDHCI_GLI_9750_CFG2_L1DLY;
/* set ASPM L1 entry delay to 7.9us */
value |= FIELD_PREP(SDHCI_GLI_9750_CFG2_L1DLY,
GLI_9750_CFG2_L1DLY_VALUE);
sdhci_writel(host, value, SDHCI_GLI_9750_CFG2);
/* toggle PM state to allow GL9750 to enter ASPM L1.2 */
pci_read_config_dword(pdev, PCI_GLI_9750_PM_CTRL, &value);
value |= PCI_GLI_9750_PM_STATE;
pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
value &= ~PCI_GLI_9750_PM_STATE;
pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
/* mask the replay timer timeout of AER */
pci_read_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, &value);
value |= PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT;
pci_write_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, value);
gl9750_wt_off(host);
}
static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot)
{
int ret;
ret = pci_alloc_irq_vectors(slot->chip->pdev, 1, 1,
PCI_IRQ_MSI | PCI_IRQ_MSIX);
if (ret < 0) {
pr_warn("%s: enable PCI MSI failed, error=%d\n",
mmc_hostname(slot->host->mmc), ret);
return;
}
slot->host->irq = pci_irq_vector(slot->chip->pdev, 0);
}
static inline void gl9755_wt_on(struct pci_dev *pdev)
{
u32 wt_value;
u32 wt_enable;
pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value);
wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value);
if (wt_enable == GLI_9755_WT_EN_ON)
return;
wt_value &= ~PCI_GLI_9755_WT_EN;
wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_ON);
pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value);
}
static inline void gl9755_wt_off(struct pci_dev *pdev)
{
u32 wt_value;
u32 wt_enable;
pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value);
wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value);
if (wt_enable == GLI_9755_WT_EN_OFF)
return;
wt_value &= ~PCI_GLI_9755_WT_EN;
wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_OFF);
pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value);
}
static void gl9755_disable_ssc_pll(struct pci_dev *pdev)
{
u32 pll;
gl9755_wt_on(pdev);
pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
pll &= ~(PCI_GLI_9755_PLL_DIR | PCI_GLI_9755_PLLSSC_EN);
pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
gl9755_wt_off(pdev);
}
static void gl9755_set_pll(struct pci_dev *pdev, u8 dir, u16 ldiv, u8 pdiv)
{
u32 pll;
gl9755_wt_on(pdev);
pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
pll &= ~(PCI_GLI_9755_PLL_LDIV |
PCI_GLI_9755_PLL_PDIV |
PCI_GLI_9755_PLL_DIR);
pll |= FIELD_PREP(PCI_GLI_9755_PLL_LDIV, ldiv) |
FIELD_PREP(PCI_GLI_9755_PLL_PDIV, pdiv) |
FIELD_PREP(PCI_GLI_9755_PLL_DIR, dir);
pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
gl9755_wt_off(pdev);
/* wait for pll stable */
mdelay(1);
}
static void gl9755_set_ssc(struct pci_dev *pdev, u8 enable, u8 step, u16 ppm)
{
u32 pll;
u32 ssc;
gl9755_wt_on(pdev);
pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &ssc);
pll &= ~(PCI_GLI_9755_PLLSSC_STEP |
PCI_GLI_9755_PLLSSC_EN);
ssc &= ~PCI_GLI_9755_PLLSSC_PPM;
pll |= FIELD_PREP(PCI_GLI_9755_PLLSSC_STEP, step) |
FIELD_PREP(PCI_GLI_9755_PLLSSC_EN, enable);
ssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_PPM, ppm);
pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, ssc);
pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
gl9755_wt_off(pdev);
}
static void gl9755_set_ssc_pll_205mhz(struct pci_dev *pdev)
{
/* set pll to 205MHz and enable ssc */
gl9755_set_ssc(pdev, 0x1, 0x1F, 0xFFE7);
gl9755_set_pll(pdev, 0x1, 0x246, 0x0);
}
static void sdhci_gl9755_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pci_slot *slot = sdhci_priv(host);
struct mmc_ios *ios = &host->mmc->ios;
struct pci_dev *pdev;
u16 clk;
pdev = slot->chip->pdev;
host->mmc->actual_clock = 0;
gl9755_disable_ssc_pll(pdev);
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
return;
clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
host->mmc->actual_clock = 205000000;
gl9755_set_ssc_pll_205mhz(pdev);
}
sdhci_enable_clk(host, clk);
}
static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
{
struct pci_dev *pdev = slot->chip->pdev;
u32 value;
gl9755_wt_on(pdev);
pci_read_config_dword(pdev, PCI_GLI_9755_PECONF, &value);
/*
* Apple ARM64 platforms using these chips may have
* inverted CD/WP detection.
*/
if (of_property_read_bool(pdev->dev.of_node, "cd-inverted"))
value |= PCI_GLI_9755_INVERT_CD;
if (of_property_read_bool(pdev->dev.of_node, "wp-inverted"))
value |= PCI_GLI_9755_INVERT_WP;
value &= ~PCI_GLI_9755_LFCLK;
value &= ~PCI_GLI_9755_DMACLK;
pci_write_config_dword(pdev, PCI_GLI_9755_PECONF, value);
/* enable short circuit protection */
pci_read_config_dword(pdev, PCI_GLI_9755_SerDes, &value);
value &= ~PCI_GLI_9755_SCP_DIS;
pci_write_config_dword(pdev, PCI_GLI_9755_SerDes, value);
pci_read_config_dword(pdev, PCI_GLI_9755_CFG2, &value);
value &= ~PCI_GLI_9755_CFG2_L1DLY;
/* set ASPM L1 entry delay to 7.9us */
value |= FIELD_PREP(PCI_GLI_9755_CFG2_L1DLY,
GLI_9755_CFG2_L1DLY_VALUE);
pci_write_config_dword(pdev, PCI_GLI_9755_CFG2, value);
gl9755_wt_off(pdev);
}
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
gl9750_hw_setting(host);
gli_pcie_enable_msi(slot);
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
sdhci_enable_v4_mode(host);
return 0;
}
static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
gl9755_hw_setting(slot);
gli_pcie_enable_msi(slot);
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
sdhci_enable_v4_mode(host);
return 0;
}
static void sdhci_gli_voltage_switch(struct sdhci_host *host)
{
/*
* According to Section 3.6.1 signal voltage switch procedure in
* SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
* follows:
* (6) Set 1.8V Signal Enable in the Host Control 2 register.
* (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
* period.
* (8) If 1.8V Signal Enable is cleared by Host Controller, go to
* step (12).
*
* Wait 5ms after set 1.8V signal enable in Host Control 2 register
* to ensure 1.8V signal enable bit is set by GL9750/GL9755.
*
* ...however, the controller in the NUC10i3FNK4 (a 9755) requires
* slightly longer than 5ms before the control register reports that
* 1.8V is ready, and far longer still before the card will actually
* work reliably.
*/
usleep_range(100000, 110000);
}
static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
{
sdhci_reset(host, mask);
gli_set_9750(host);
}
static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
{
u32 value;
value = readl(host->ioaddr + reg);
if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff)))
value |= 0xc8;
return value;
}
#ifdef CONFIG_PM_SLEEP
static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip)
{
struct sdhci_pci_slot *slot = chip->slots[0];
pci_free_irq_vectors(slot->chip->pdev);
gli_pcie_enable_msi(slot);
return sdhci_pci_resume_host(chip);
}
static int sdhci_cqhci_gli_resume(struct sdhci_pci_chip *chip)
{
struct sdhci_pci_slot *slot = chip->slots[0];
int ret;
ret = sdhci_pci_gli_resume(chip);
if (ret)
return ret;
return cqhci_resume(slot->host->mmc);
}
static int sdhci_cqhci_gli_suspend(struct sdhci_pci_chip *chip)
{
struct sdhci_pci_slot *slot = chip->slots[0];
int ret;
ret = cqhci_suspend(slot->host->mmc);
if (ret)
return ret;
return sdhci_suspend_host(slot->host);
}
#endif
static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc,
struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
u32 val;
val = sdhci_readl(host, SDHCI_GLI_9763E_HS400_ES_REG);
if (ios->enhanced_strobe)
val |= SDHCI_GLI_9763E_HS400_ES_BIT;
else
val &= ~SDHCI_GLI_9763E_HS400_ES_BIT;
sdhci_writel(host, val, SDHCI_GLI_9763E_HS400_ES_REG);
}
static void sdhci_set_gl9763e_signaling(struct sdhci_host *host,
unsigned int timing)
{
u16 ctrl_2;
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
if (timing == MMC_TIMING_MMC_HS200)
ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
else if (timing == MMC_TIMING_MMC_HS)
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
else if (timing == MMC_TIMING_MMC_DDR52)
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
else if (timing == MMC_TIMING_MMC_HS400)
ctrl_2 |= SDHCI_GLI_9763E_CTRL_HS400;
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
static void sdhci_gl9763e_dumpregs(struct mmc_host *mmc)
{
sdhci_dumpregs(mmc_priv(mmc));
}
static void sdhci_gl9763e_cqe_pre_enable(struct mmc_host *mmc)
{
struct cqhci_host *cq_host = mmc->cqe_private;
u32 value;
value = cqhci_readl(cq_host, CQHCI_CFG);
value |= CQHCI_ENABLE;
cqhci_writel(cq_host, value, CQHCI_CFG);
}
static void sdhci_gl9763e_cqe_enable(struct mmc_host *mmc)
{
struct sdhci_host *host = mmc_priv(mmc);
sdhci_writew(host, GLI_9763E_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
sdhci_cqe_enable(mmc);
}
static u32 sdhci_gl9763e_cqhci_irq(struct sdhci_host *host, u32 intmask)
{
int cmd_error = 0;
int data_error = 0;
if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
return intmask;
cqhci_irq(host->mmc, intmask, cmd_error, data_error);
return 0;
}
static void sdhci_gl9763e_cqe_post_disable(struct mmc_host *mmc)
{
struct sdhci_host *host = mmc_priv(mmc);
struct cqhci_host *cq_host = mmc->cqe_private;
u32 value;
value = cqhci_readl(cq_host, CQHCI_CFG);
value &= ~CQHCI_ENABLE;
cqhci_writel(cq_host, value, CQHCI_CFG);
sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
}
static const struct cqhci_host_ops sdhci_gl9763e_cqhci_ops = {
.enable = sdhci_gl9763e_cqe_enable,
.disable = sdhci_cqe_disable,
.dumpregs = sdhci_gl9763e_dumpregs,
.pre_enable = sdhci_gl9763e_cqe_pre_enable,
.post_disable = sdhci_gl9763e_cqe_post_disable,
};
static int gl9763e_add_host(struct sdhci_pci_slot *slot)
{
struct device *dev = &slot->chip->pdev->dev;
struct sdhci_host *host = slot->host;
struct cqhci_host *cq_host;
bool dma64;
int ret;
ret = sdhci_setup_host(host);
if (ret)
return ret;
cq_host = devm_kzalloc(dev, sizeof(*cq_host), GFP_KERNEL);
if (!cq_host) {
ret = -ENOMEM;
goto cleanup;
}
cq_host->mmio = host->ioaddr + SDHCI_GLI_9763E_CQE_BASE_ADDR;
cq_host->ops = &sdhci_gl9763e_cqhci_ops;
dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
if (dma64)
cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
ret = cqhci_init(cq_host, host->mmc, dma64);
if (ret)
goto cleanup;
ret = __sdhci_add_host(host);
if (ret)
goto cleanup;
return 0;
cleanup:
sdhci_cleanup_host(host);
return ret;
}
static void sdhci_gl9763e_reset(struct sdhci_host *host, u8 mask)
{
if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) &&
host->mmc->cqe_private)
cqhci_deactivate(host->mmc);
sdhci_reset(host, mask);
}
static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
{
struct pci_dev *pdev = slot->chip->pdev;
u32 value;
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
value &= ~GLI_9763E_VHS_REV;
value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
pci_read_config_dword(pdev, PCIE_GLI_9763E_SCR, &value);
value |= GLI_9763E_SCR_AXI_REQ;
pci_write_config_dword(pdev, PCIE_GLI_9763E_SCR, value);
pci_read_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, &value);
value &= ~GLI_9763E_HS400_SLOW;
pci_write_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, value);
pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG2, &value);
value &= ~GLI_9763E_CFG2_L1DLY;
/* set ASPM L1 entry delay to 21us */
value |= FIELD_PREP(GLI_9763E_CFG2_L1DLY, GLI_9763E_CFG2_L1DLY_MID);
pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG2, value);
pci_read_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, &value);
value &= ~GLI_9763E_HS400_RXDLY;
value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
value &= ~GLI_9763E_VHS_REV;
value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
}
static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
{
struct pci_dev *pdev = slot->chip->pdev;
struct sdhci_host *host = slot->host;
u32 value;
host->mmc->caps |= MMC_CAP_8_BIT_DATA |
MMC_CAP_1_8V_DDR |
MMC_CAP_NONREMOVABLE;
host->mmc->caps2 |= MMC_CAP2_HS200_1_8V_SDR |
MMC_CAP2_HS400_1_8V |
MMC_CAP2_HS400_ES |
MMC_CAP2_NO_SDIO |
MMC_CAP2_NO_SD;
pci_read_config_dword(pdev, PCIE_GLI_9763E_MB, &value);
if (!(value & GLI_9763E_MB_CMDQ_OFF))
if (value & GLI_9763E_MB_ERP_ON)
host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
gli_pcie_enable_msi(slot);
host->mmc_host_ops.hs400_enhanced_strobe =
gl9763e_hs400_enhanced_strobe;
gli_set_gl9763e(slot);
sdhci_enable_v4_mode(host);
return 0;
}
static const struct sdhci_ops sdhci_gl9755_ops = {
.set_clock = sdhci_gl9755_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.voltage_switch = sdhci_gli_voltage_switch,
};
const struct sdhci_pci_fixes sdhci_gl9755 = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
.probe_slot = gli_probe_slot_gl9755,
.ops = &sdhci_gl9755_ops,
#ifdef CONFIG_PM_SLEEP
.resume = sdhci_pci_gli_resume,
#endif
};
static const struct sdhci_ops sdhci_gl9750_ops = {
.read_l = sdhci_gl9750_readl,
.set_clock = sdhci_gl9750_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_gl9750_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.voltage_switch = sdhci_gli_voltage_switch,
.platform_execute_tuning = gl9750_execute_tuning,
};
const struct sdhci_pci_fixes sdhci_gl9750 = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
.probe_slot = gli_probe_slot_gl9750,
.ops = &sdhci_gl9750_ops,
#ifdef CONFIG_PM_SLEEP
.resume = sdhci_pci_gli_resume,
#endif
};
static const struct sdhci_ops sdhci_gl9763e_ops = {
.set_clock = sdhci_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_gl9763e_reset,
.set_uhs_signaling = sdhci_set_gl9763e_signaling,
.voltage_switch = sdhci_gli_voltage_switch,
.irq = sdhci_gl9763e_cqhci_irq,
};
const struct sdhci_pci_fixes sdhci_gl9763e = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.probe_slot = gli_probe_slot_gl9763e,
.ops = &sdhci_gl9763e_ops,
#ifdef CONFIG_PM_SLEEP
.resume = sdhci_cqhci_gli_resume,
.suspend = sdhci_cqhci_gli_suspend,
#endif
.add_host = gl9763e_add_host,
};