1582 lines
43 KiB
C
1582 lines
43 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner
|
|
* Pin compatible with the LMK0482x family
|
|
*
|
|
* Datasheet: https://www.ti.com/lit/ds/symlink/lmk04832.pdf
|
|
*
|
|
* Copyright (c) 2020, Xiphos Systems Corp.
|
|
*
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gcd.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
/* 0x000 - 0x00d System Functions */
|
|
#define LMK04832_REG_RST3W 0x000
|
|
#define LMK04832_BIT_RESET BIT(7)
|
|
#define LMK04832_BIT_SPI_3WIRE_DIS BIT(4)
|
|
#define LMK04832_REG_POWERDOWN 0x002
|
|
#define LMK04832_REG_ID_DEV_TYPE 0x003
|
|
#define LMK04832_REG_ID_PROD_MSB 0x004
|
|
#define LMK04832_REG_ID_PROD_LSB 0x005
|
|
#define LMK04832_REG_ID_MASKREV 0x006
|
|
#define LMK04832_REG_ID_VNDR_MSB 0x00c
|
|
#define LMK04832_REG_ID_VNDR_LSB 0x00d
|
|
|
|
/* 0x100 - 0x137 Device Clock and SYSREF Clock Output Control */
|
|
#define LMK04832_REG_CLKOUT_CTRL0(ch) (0x100 + (ch >> 1) * 8)
|
|
#define LMK04832_BIT_DCLK_DIV_LSB GENMASK(7, 0)
|
|
#define LMK04832_REG_CLKOUT_CTRL1(ch) (0x101 + (ch >> 1) * 8)
|
|
#define LMK04832_BIT_DCLKX_Y_DDLY_LSB GENMASK(7, 0)
|
|
#define LMK04832_REG_CLKOUT_CTRL2(ch) (0x102 + (ch >> 1) * 8)
|
|
#define LMK04832_BIT_CLKOUTX_Y_PD BIT(7)
|
|
#define LMK04832_BIT_DCLKX_Y_DDLY_PD BIT(4)
|
|
#define LMK04832_BIT_DCLKX_Y_DDLY_MSB GENMASK(3, 2)
|
|
#define LMK04832_BIT_DCLK_DIV_MSB GENMASK(1, 0)
|
|
#define LMK04832_REG_CLKOUT_SRC_MUX(ch) (0x103 + (ch % 2) + (ch >> 1) * 8)
|
|
#define LMK04832_BIT_CLKOUT_SRC_MUX BIT(5)
|
|
#define LMK04832_REG_CLKOUT_CTRL3(ch) (0x103 + (ch >> 1) * 8)
|
|
#define LMK04832_BIT_DCLKX_Y_PD BIT(4)
|
|
#define LMK04832_BIT_DCLKX_Y_DCC BIT(2)
|
|
#define LMK04832_BIT_DCLKX_Y_HS BIT(0)
|
|
#define LMK04832_REG_CLKOUT_CTRL4(ch) (0x104 + (ch >> 1) * 8)
|
|
#define LMK04832_BIT_SCLK_PD BIT(4)
|
|
#define LMK04832_BIT_SCLKX_Y_DIS_MODE GENMASK(3, 2)
|
|
#define LMK04832_REG_SCLKX_Y_ADLY(ch) (0x105 + (ch >> 1) * 8)
|
|
#define LMK04832_REG_SCLKX_Y_DDLY(ch) (0x106 + (ch >> 1) * 8)
|
|
#define LMK04832_BIT_SCLKX_Y_DDLY GENMASK(3, 0)
|
|
#define LMK04832_REG_CLKOUT_FMT(ch) (0x107 + (ch >> 1) * 8)
|
|
#define LMK04832_BIT_CLKOUT_FMT(ch) (ch % 2 ? 0xf0 : 0x0f)
|
|
#define LMK04832_VAL_CLKOUT_FMT_POWERDOWN 0x00
|
|
#define LMK04832_VAL_CLKOUT_FMT_LVDS 0x01
|
|
#define LMK04832_VAL_CLKOUT_FMT_HSDS6 0x02
|
|
#define LMK04832_VAL_CLKOUT_FMT_HSDS8 0x03
|
|
#define LMK04832_VAL_CLKOUT_FMT_LVPECL1600 0x04
|
|
#define LMK04832_VAL_CLKOUT_FMT_LVPECL2000 0x05
|
|
#define LMK04832_VAL_CLKOUT_FMT_LCPECL 0x06
|
|
#define LMK04832_VAL_CLKOUT_FMT_CML16 0x07
|
|
#define LMK04832_VAL_CLKOUT_FMT_CML24 0x08
|
|
#define LMK04832_VAL_CLKOUT_FMT_CML32 0x09
|
|
#define LMK04832_VAL_CLKOUT_FMT_CMOS_OFF_INV 0x0a
|
|
#define LMK04832_VAL_CLKOUT_FMT_CMOS_NOR_OFF 0x0b
|
|
#define LMK04832_VAL_CLKOUT_FMT_CMOS_INV_INV 0x0c
|
|
#define LMK04832_VAL_CLKOUT_FMT_CMOS_INV_NOR 0x0d
|
|
#define LMK04832_VAL_CLKOUT_FMT_CMOS_NOR_INV 0x0e
|
|
#define LMK04832_VAL_CLKOUT_FMT_CMOS_NOR_NOR 0x0f
|
|
|
|
/* 0x138 - 0x145 SYSREF, SYNC, and Device Config */
|
|
#define LMK04832_REG_VCO_OSCOUT 0x138
|
|
#define LMK04832_BIT_VCO_MUX GENMASK(6, 5)
|
|
#define LMK04832_VAL_VCO_MUX_VCO0 0x00
|
|
#define LMK04832_VAL_VCO_MUX_VCO1 0x01
|
|
#define LMK04832_VAL_VCO_MUX_EXT 0x02
|
|
#define LMK04832_REG_SYSREF_OUT 0x139
|
|
#define LMK04832_BIT_SYSREF_REQ_EN BIT(6)
|
|
#define LMK04832_BIT_SYSREF_MUX GENMASK(1, 0)
|
|
#define LMK04832_VAL_SYSREF_MUX_NORMAL_SYNC 0x00
|
|
#define LMK04832_VAL_SYSREF_MUX_RECLK 0x01
|
|
#define LMK04832_VAL_SYSREF_MUX_PULSER 0x02
|
|
#define LMK04832_VAL_SYSREF_MUX_CONTINUOUS 0x03
|
|
#define LMK04832_REG_SYSREF_DIV_MSB 0x13a
|
|
#define LMK04832_BIT_SYSREF_DIV_MSB GENMASK(4, 0)
|
|
#define LMK04832_REG_SYSREF_DIV_LSB 0x13b
|
|
#define LMK04832_REG_SYSREF_DDLY_MSB 0x13c
|
|
#define LMK04832_BIT_SYSREF_DDLY_MSB GENMASK(4, 0)
|
|
#define LMK04832_REG_SYSREF_DDLY_LSB 0x13d
|
|
#define LMK04832_REG_SYSREF_PULSE_CNT 0x13e
|
|
#define LMK04832_REG_FB_CTRL 0x13f
|
|
#define LMK04832_BIT_PLL2_RCLK_MUX BIT(7)
|
|
#define LMK04832_VAL_PLL2_RCLK_MUX_OSCIN 0x00
|
|
#define LMK04832_VAL_PLL2_RCLK_MUX_CLKIN 0x01
|
|
#define LMK04832_BIT_PLL2_NCLK_MUX BIT(5)
|
|
#define LMK04832_VAL_PLL2_NCLK_MUX_PLL2_P 0x00
|
|
#define LMK04832_VAL_PLL2_NCLK_MUX_FB_MUX 0x01
|
|
#define LMK04832_BIT_FB_MUX_EN BIT(0)
|
|
#define LMK04832_REG_MAIN_PD 0x140
|
|
#define LMK04832_BIT_PLL1_PD BIT(7)
|
|
#define LMK04832_BIT_VCO_LDO_PD BIT(6)
|
|
#define LMK04832_BIT_VCO_PD BIT(5)
|
|
#define LMK04832_BIT_OSCIN_PD BIT(4)
|
|
#define LMK04832_BIT_SYSREF_GBL_PD BIT(3)
|
|
#define LMK04832_BIT_SYSREF_PD BIT(2)
|
|
#define LMK04832_BIT_SYSREF_DDLY_PD BIT(1)
|
|
#define LMK04832_BIT_SYSREF_PLSR_PD BIT(0)
|
|
#define LMK04832_REG_SYNC 0x143
|
|
#define LMK04832_BIT_SYNC_CLR BIT(7)
|
|
#define LMK04832_BIT_SYNC_1SHOT_EN BIT(6)
|
|
#define LMK04832_BIT_SYNC_POL BIT(5)
|
|
#define LMK04832_BIT_SYNC_EN BIT(4)
|
|
#define LMK04832_BIT_SYNC_MODE GENMASK(1, 0)
|
|
#define LMK04832_VAL_SYNC_MODE_OFF 0x00
|
|
#define LMK04832_VAL_SYNC_MODE_ON 0x01
|
|
#define LMK04832_VAL_SYNC_MODE_PULSER_PIN 0x02
|
|
#define LMK04832_VAL_SYNC_MODE_PULSER_SPI 0x03
|
|
#define LMK04832_REG_SYNC_DIS 0x144
|
|
|
|
/* 0x146 - 0x14a CLKin Control */
|
|
#define LMK04832_REG_CLKIN_SEL0 0x148
|
|
#define LMK04832_REG_CLKIN_SEL1 0x149
|
|
#define LMK04832_REG_CLKIN_RST 0x14a
|
|
#define LMK04832_BIT_SDIO_RDBK_TYPE BIT(6)
|
|
#define LMK04832_BIT_CLKIN_SEL_MUX GENMASK(5, 3)
|
|
#define LMK04832_VAL_CLKIN_SEL_MUX_SPI_RDBK 0x06
|
|
#define LMK04832_BIT_CLKIN_SEL_TYPE GENMASK(2, 0)
|
|
#define LMK04832_VAL_CLKIN_SEL_TYPE_OUT 0x03
|
|
|
|
/* 0x14b - 0x152 Holdover */
|
|
|
|
/* 0x153 - 0x15f PLL1 Configuration */
|
|
|
|
/* 0x160 - 0x16e PLL2 Configuration */
|
|
#define LMK04832_REG_PLL2_R_MSB 0x160
|
|
#define LMK04832_BIT_PLL2_R_MSB GENMASK(3, 0)
|
|
#define LMK04832_REG_PLL2_R_LSB 0x161
|
|
#define LMK04832_REG_PLL2_MISC 0x162
|
|
#define LMK04832_BIT_PLL2_MISC_P GENMASK(7, 5)
|
|
#define LMK04832_BIT_PLL2_MISC_REF_2X_EN BIT(0)
|
|
#define LMK04832_REG_PLL2_N_CAL_0 0x163
|
|
#define LMK04832_BIT_PLL2_N_CAL_0 GENMASK(1, 0)
|
|
#define LMK04832_REG_PLL2_N_CAL_1 0x164
|
|
#define LMK04832_REG_PLL2_N_CAL_2 0x165
|
|
#define LMK04832_REG_PLL2_N_0 0x166
|
|
#define LMK04832_BIT_PLL2_N_0 GENMASK(1, 0)
|
|
#define LMK04832_REG_PLL2_N_1 0x167
|
|
#define LMK04832_REG_PLL2_N_2 0x168
|
|
#define LMK04832_REG_PLL2_DLD_CNT_MSB 0x16a
|
|
#define LMK04832_REG_PLL2_DLD_CNT_LSB 0x16b
|
|
#define LMK04832_REG_PLL2_LD 0x16e
|
|
#define LMK04832_BIT_PLL2_LD_MUX GENMASK(7, 3)
|
|
#define LMK04832_VAL_PLL2_LD_MUX_PLL2_DLD 0x02
|
|
#define LMK04832_BIT_PLL2_LD_TYPE GENMASK(2, 0)
|
|
#define LMK04832_VAL_PLL2_LD_TYPE_OUT_PP 0x03
|
|
|
|
/* 0x16F - 0x555 Misc Registers */
|
|
#define LMK04832_REG_PLL2_PD 0x173
|
|
#define LMK04832_BIT_PLL2_PRE_PD BIT(6)
|
|
#define LMK04832_BIT_PLL2_PD BIT(5)
|
|
#define LMK04832_REG_PLL1R_RST 0x177
|
|
#define LMK04832_REG_CLR_PLL_LOST 0x182
|
|
#define LMK04832_REG_RB_PLL_LD 0x183
|
|
#define LMK04832_REG_RB_CLK_DAC_VAL_MSB 0x184
|
|
#define LMK04832_REG_RB_DAC_VAL_LSB 0x185
|
|
#define LMK04832_REG_RB_HOLDOVER 0x188
|
|
#define LMK04832_REG_SPI_LOCK 0x555
|
|
|
|
enum lmk04832_device_types {
|
|
LMK04832,
|
|
};
|
|
|
|
/**
|
|
* lmk04832_device_info - Holds static device information that is specific to
|
|
* the chip revision
|
|
*
|
|
* pid: Product Identifier
|
|
* maskrev: IC version identifier
|
|
* num_channels: Number of available output channels (clkout count)
|
|
* vco0_range: {min, max} of the VCO0 operating range (in MHz)
|
|
* vco1_range: {min, max} of the VCO1 operating range (in MHz)
|
|
*/
|
|
struct lmk04832_device_info {
|
|
u16 pid;
|
|
u8 maskrev;
|
|
size_t num_channels;
|
|
unsigned int vco0_range[2];
|
|
unsigned int vco1_range[2];
|
|
};
|
|
|
|
static const struct lmk04832_device_info lmk04832_device_info[] = {
|
|
[LMK04832] = {
|
|
.pid = 0x63d1, /* WARNING PROD_ID is inverted in the datasheet */
|
|
.maskrev = 0x70,
|
|
.num_channels = 14,
|
|
.vco0_range = { 2440, 2580 },
|
|
.vco1_range = { 2945, 3255 },
|
|
},
|
|
};
|
|
|
|
enum lmk04832_rdbk_type {
|
|
RDBK_CLKIN_SEL0,
|
|
RDBK_CLKIN_SEL1,
|
|
RDBK_RESET,
|
|
};
|
|
|
|
struct lmk_dclk {
|
|
struct lmk04832 *lmk;
|
|
struct clk_hw hw;
|
|
u8 id;
|
|
};
|
|
|
|
struct lmk_clkout {
|
|
struct lmk04832 *lmk;
|
|
struct clk_hw hw;
|
|
bool sysref;
|
|
u32 format;
|
|
u8 id;
|
|
};
|
|
|
|
/**
|
|
* struct lmk04832 - The LMK04832 device structure
|
|
*
|
|
* @dev: reference to a struct device, linked to the spi_device
|
|
* @regmap: struct regmap instance use to access the chip
|
|
* @sync_mode: operational mode for SYNC signal
|
|
* @sysref_mux: select SYSREF source
|
|
* @sysref_pulse_cnt: number of SYSREF pulses generated while not in continuous
|
|
* mode.
|
|
* @sysref_ddly: SYSREF digital delay value
|
|
* @oscin: PLL2 input clock
|
|
* @vco: reference to the internal VCO clock
|
|
* @sclk: reference to the internal sysref clock (SCLK)
|
|
* @vco_rate: user provided VCO rate
|
|
* @reset_gpio: reference to the reset GPIO
|
|
* @dclk: list of internal device clock references.
|
|
* Each pair of clkout clocks share a single device clock (DCLKX_Y)
|
|
* @clkout: list of output clock references
|
|
* @clk_data: holds clkout related data like clk_hw* and number of clocks
|
|
*/
|
|
struct lmk04832 {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
|
|
unsigned int sync_mode;
|
|
unsigned int sysref_mux;
|
|
unsigned int sysref_pulse_cnt;
|
|
unsigned int sysref_ddly;
|
|
|
|
struct clk *oscin;
|
|
struct clk_hw vco;
|
|
struct clk_hw sclk;
|
|
unsigned int vco_rate;
|
|
|
|
struct gpio_desc *reset_gpio;
|
|
|
|
struct lmk_dclk *dclk;
|
|
struct lmk_clkout *clkout;
|
|
struct clk_hw_onecell_data *clk_data;
|
|
};
|
|
|
|
static bool lmk04832_regmap_rd_regs(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case LMK04832_REG_RST3W ... LMK04832_REG_ID_MASKREV:
|
|
case LMK04832_REG_ID_VNDR_MSB:
|
|
case LMK04832_REG_ID_VNDR_LSB:
|
|
case LMK04832_REG_CLKOUT_CTRL0(0) ... LMK04832_REG_PLL2_DLD_CNT_LSB:
|
|
case LMK04832_REG_PLL2_LD:
|
|
case LMK04832_REG_PLL2_PD:
|
|
case LMK04832_REG_PLL1R_RST:
|
|
case LMK04832_REG_CLR_PLL_LOST ... LMK04832_REG_RB_DAC_VAL_LSB:
|
|
case LMK04832_REG_RB_HOLDOVER:
|
|
case LMK04832_REG_SPI_LOCK:
|
|
return true;
|
|
default:
|
|
return false;
|
|
};
|
|
};
|
|
|
|
static bool lmk04832_regmap_wr_regs(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case LMK04832_REG_RST3W:
|
|
case LMK04832_REG_POWERDOWN:
|
|
return true;
|
|
case LMK04832_REG_ID_DEV_TYPE ... LMK04832_REG_ID_MASKREV:
|
|
case LMK04832_REG_ID_VNDR_MSB:
|
|
case LMK04832_REG_ID_VNDR_LSB:
|
|
return false;
|
|
case LMK04832_REG_CLKOUT_CTRL0(0) ... LMK04832_REG_PLL2_DLD_CNT_LSB:
|
|
case LMK04832_REG_PLL2_LD:
|
|
case LMK04832_REG_PLL2_PD:
|
|
case LMK04832_REG_PLL1R_RST:
|
|
case LMK04832_REG_CLR_PLL_LOST ... LMK04832_REG_RB_DAC_VAL_LSB:
|
|
case LMK04832_REG_RB_HOLDOVER:
|
|
case LMK04832_REG_SPI_LOCK:
|
|
return true;
|
|
default:
|
|
return false;
|
|
};
|
|
};
|
|
|
|
static const struct regmap_config regmap_config = {
|
|
.name = "lmk04832",
|
|
.reg_bits = 16,
|
|
.val_bits = 8,
|
|
.use_single_read = 1,
|
|
.use_single_write = 1,
|
|
.read_flag_mask = 0x80,
|
|
.write_flag_mask = 0x00,
|
|
.readable_reg = lmk04832_regmap_rd_regs,
|
|
.writeable_reg = lmk04832_regmap_wr_regs,
|
|
.cache_type = REGCACHE_NONE,
|
|
.max_register = LMK04832_REG_SPI_LOCK,
|
|
};
|
|
|
|
static int lmk04832_vco_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
|
|
unsigned int tmp;
|
|
int ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_MAIN_PD, &tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !(FIELD_GET(LMK04832_BIT_OSCIN_PD, tmp) |
|
|
FIELD_GET(LMK04832_BIT_VCO_PD, tmp) |
|
|
FIELD_GET(LMK04832_BIT_VCO_LDO_PD, tmp));
|
|
}
|
|
|
|
static int lmk04832_vco_prepare(struct clk_hw *hw)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_PD,
|
|
LMK04832_BIT_PLL2_PRE_PD |
|
|
LMK04832_BIT_PLL2_PD,
|
|
0x00);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
|
|
LMK04832_BIT_VCO_LDO_PD |
|
|
LMK04832_BIT_VCO_PD |
|
|
LMK04832_BIT_OSCIN_PD, 0x00);
|
|
}
|
|
|
|
static void lmk04832_vco_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
|
|
|
|
regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_PD,
|
|
LMK04832_BIT_PLL2_PRE_PD | LMK04832_BIT_PLL2_PD,
|
|
0xff);
|
|
|
|
/* Don't set LMK04832_BIT_OSCIN_PD since other clocks depend on it */
|
|
regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
|
|
LMK04832_BIT_VCO_LDO_PD | LMK04832_BIT_VCO_PD, 0xff);
|
|
}
|
|
|
|
static unsigned long lmk04832_vco_recalc_rate(struct clk_hw *hw,
|
|
unsigned long prate)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
|
|
unsigned int pll2_p[] = {8, 2, 2, 3, 4, 5, 6, 7};
|
|
unsigned int pll2_n, p, pll2_r;
|
|
unsigned int pll2_misc;
|
|
unsigned long vco_rate;
|
|
u8 tmp[3];
|
|
int ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_PLL2_MISC, &pll2_misc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
p = FIELD_GET(LMK04832_BIT_PLL2_MISC_P, pll2_misc);
|
|
|
|
ret = regmap_bulk_read(lmk->regmap, LMK04832_REG_PLL2_N_0, &tmp, 3);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pll2_n = FIELD_PREP(0x030000, tmp[0]) |
|
|
FIELD_PREP(0x00ff00, tmp[1]) |
|
|
FIELD_PREP(0x0000ff, tmp[2]);
|
|
|
|
ret = regmap_bulk_read(lmk->regmap, LMK04832_REG_PLL2_R_MSB, &tmp, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pll2_r = FIELD_PREP(0x0f00, tmp[0]) |
|
|
FIELD_PREP(0x00ff, tmp[1]);
|
|
|
|
vco_rate = (prate << FIELD_GET(LMK04832_BIT_PLL2_MISC_REF_2X_EN,
|
|
pll2_misc)) * pll2_n * pll2_p[p] / pll2_r;
|
|
|
|
return vco_rate;
|
|
};
|
|
|
|
/**
|
|
* lmk04832_check_vco_ranges - Check requested VCO frequency against VCO ranges
|
|
*
|
|
* @lmk: Reference to the lmk device
|
|
* @rate: Desired output rate for the VCO
|
|
*
|
|
* The LMK04832 has 2 internal VCO, each with independent operating ranges.
|
|
* Use the device_info structure to determine which VCO to use based on rate.
|
|
*
|
|
* Returns VCO_MUX value or negative errno.
|
|
*/
|
|
static int lmk04832_check_vco_ranges(struct lmk04832 *lmk, unsigned long rate)
|
|
{
|
|
struct spi_device *spi = to_spi_device(lmk->dev);
|
|
const struct lmk04832_device_info *info;
|
|
unsigned long mhz = rate / 1000000;
|
|
|
|
info = &lmk04832_device_info[spi_get_device_id(spi)->driver_data];
|
|
|
|
if (mhz >= info->vco0_range[0] && mhz <= info->vco0_range[1])
|
|
return LMK04832_VAL_VCO_MUX_VCO0;
|
|
|
|
if (mhz >= info->vco1_range[0] && mhz <= info->vco1_range[1])
|
|
return LMK04832_VAL_VCO_MUX_VCO1;
|
|
|
|
dev_err(lmk->dev, "%lu Hz is out of VCO ranges\n", rate);
|
|
return -ERANGE;
|
|
}
|
|
|
|
/**
|
|
* lmk04832_calc_pll2_params - Get PLL2 parameters used to set the VCO frequency
|
|
*
|
|
* @prate: parent rate to the PLL2, usually OSCin
|
|
* @rate: Desired output rate for the VCO
|
|
* @n: reference to PLL2_N
|
|
* @p: reference to PLL2_P
|
|
* @r: reference to PLL2_R
|
|
*
|
|
* This functions assumes LMK04832_BIT_PLL2_MISC_REF_2X_EN is set since it is
|
|
* recommended in the datasheet because a higher phase detector frequencies
|
|
* makes the design of wider loop bandwidth filters possible.
|
|
*
|
|
* the VCO rate can be calculated using the following expression:
|
|
*
|
|
* VCO = OSCin * 2 * PLL2_N * PLL2_P / PLL2_R
|
|
*
|
|
* Returns vco rate or negative errno.
|
|
*/
|
|
static long lmk04832_calc_pll2_params(unsigned long prate, unsigned long rate,
|
|
unsigned int *n, unsigned int *p,
|
|
unsigned int *r)
|
|
{
|
|
unsigned int pll2_n, pll2_p, pll2_r;
|
|
unsigned long num, div;
|
|
|
|
/* Set PLL2_P to a fixed value to simplify optimizations */
|
|
pll2_p = 2;
|
|
|
|
div = gcd(rate, prate);
|
|
|
|
num = DIV_ROUND_CLOSEST(rate, div);
|
|
pll2_r = DIV_ROUND_CLOSEST(prate, div);
|
|
|
|
if (num > 4) {
|
|
pll2_n = num >> 2;
|
|
} else {
|
|
pll2_r = pll2_r << 2;
|
|
pll2_n = num;
|
|
}
|
|
|
|
if (pll2_n < 1 || pll2_n > 0x03ffff)
|
|
return -EINVAL;
|
|
if (pll2_r < 1 || pll2_r > 0xfff)
|
|
return -EINVAL;
|
|
|
|
*n = pll2_n;
|
|
*p = pll2_p;
|
|
*r = pll2_r;
|
|
|
|
return DIV_ROUND_CLOSEST(prate * 2 * pll2_p * pll2_n, pll2_r);
|
|
}
|
|
|
|
static long lmk04832_vco_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
|
|
unsigned int n, p, r;
|
|
long vco_rate;
|
|
int ret;
|
|
|
|
ret = lmk04832_check_vco_ranges(lmk, rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
vco_rate = lmk04832_calc_pll2_params(*prate, rate, &n, &p, &r);
|
|
if (vco_rate < 0) {
|
|
dev_err(lmk->dev, "PLL2 parameters out of range\n");
|
|
return vco_rate;
|
|
}
|
|
|
|
if (rate != vco_rate)
|
|
return -EINVAL;
|
|
|
|
return vco_rate;
|
|
};
|
|
|
|
static int lmk04832_vco_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long prate)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, vco);
|
|
unsigned int n, p, r;
|
|
long vco_rate;
|
|
int vco_mux;
|
|
int ret;
|
|
|
|
vco_mux = lmk04832_check_vco_ranges(lmk, rate);
|
|
if (vco_mux < 0)
|
|
return vco_mux;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_VCO_OSCOUT,
|
|
LMK04832_BIT_VCO_MUX,
|
|
FIELD_PREP(LMK04832_BIT_VCO_MUX, vco_mux));
|
|
if (ret)
|
|
return ret;
|
|
|
|
vco_rate = lmk04832_calc_pll2_params(prate, rate, &n, &p, &r);
|
|
if (vco_rate < 0) {
|
|
dev_err(lmk->dev, "failed to determine PLL2 parameters\n");
|
|
return vco_rate;
|
|
}
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_R_MSB,
|
|
LMK04832_BIT_PLL2_R_MSB,
|
|
FIELD_GET(0x000700, r));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_PLL2_R_LSB,
|
|
FIELD_GET(0x0000ff, r));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_MISC,
|
|
LMK04832_BIT_PLL2_MISC_P,
|
|
FIELD_PREP(LMK04832_BIT_PLL2_MISC_P, p));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* PLL2_N registers must be programmed after other PLL2 dividers are
|
|
* programmed to ensure proper VCO frequency calibration
|
|
*/
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_PLL2_N_0,
|
|
FIELD_GET(0x030000, n));
|
|
if (ret)
|
|
return ret;
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_PLL2_N_1,
|
|
FIELD_GET(0x00ff00, n));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_write(lmk->regmap, LMK04832_REG_PLL2_N_2,
|
|
FIELD_GET(0x0000ff, n));
|
|
};
|
|
|
|
static const struct clk_ops lmk04832_vco_ops = {
|
|
.is_enabled = lmk04832_vco_is_enabled,
|
|
.prepare = lmk04832_vco_prepare,
|
|
.unprepare = lmk04832_vco_unprepare,
|
|
.recalc_rate = lmk04832_vco_recalc_rate,
|
|
.round_rate = lmk04832_vco_round_rate,
|
|
.set_rate = lmk04832_vco_set_rate,
|
|
};
|
|
|
|
/*
|
|
* lmk04832_register_vco - Initialize the internal VCO and clock distribution
|
|
* path in PLL2 single loop mode.
|
|
*/
|
|
static int lmk04832_register_vco(struct lmk04832 *lmk)
|
|
{
|
|
const char *parent_names[1];
|
|
struct clk_init_data init;
|
|
int ret;
|
|
|
|
init.name = "lmk-vco";
|
|
parent_names[0] = __clk_get_name(lmk->oscin);
|
|
init.parent_names = parent_names;
|
|
|
|
init.ops = &lmk04832_vco_ops;
|
|
init.num_parents = 1;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_VCO_OSCOUT,
|
|
LMK04832_BIT_VCO_MUX,
|
|
FIELD_PREP(LMK04832_BIT_VCO_MUX,
|
|
LMK04832_VAL_VCO_MUX_VCO1));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_FB_CTRL,
|
|
LMK04832_BIT_PLL2_RCLK_MUX |
|
|
LMK04832_BIT_PLL2_NCLK_MUX,
|
|
FIELD_PREP(LMK04832_BIT_PLL2_RCLK_MUX,
|
|
LMK04832_VAL_PLL2_RCLK_MUX_OSCIN)|
|
|
FIELD_PREP(LMK04832_BIT_PLL2_NCLK_MUX,
|
|
LMK04832_VAL_PLL2_NCLK_MUX_PLL2_P));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_PLL2_MISC,
|
|
LMK04832_BIT_PLL2_MISC_REF_2X_EN,
|
|
LMK04832_BIT_PLL2_MISC_REF_2X_EN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_PLL2_LD,
|
|
FIELD_PREP(LMK04832_BIT_PLL2_LD_MUX,
|
|
LMK04832_VAL_PLL2_LD_MUX_PLL2_DLD) |
|
|
FIELD_PREP(LMK04832_BIT_PLL2_LD_TYPE,
|
|
LMK04832_VAL_PLL2_LD_TYPE_OUT_PP));
|
|
if (ret)
|
|
return ret;
|
|
|
|
lmk->vco.init = &init;
|
|
return devm_clk_hw_register(lmk->dev, &lmk->vco);
|
|
}
|
|
|
|
static int lmk04832_clkout_set_ddly(struct lmk04832 *lmk, int id)
|
|
{
|
|
int dclk_div_adj[] = {0, 0, -2, -2, 0, 3, -1, 0};
|
|
unsigned int sclkx_y_ddly = 10;
|
|
unsigned int dclkx_y_ddly;
|
|
unsigned int dclkx_y_div;
|
|
unsigned int sysref_ddly;
|
|
unsigned int dclkx_y_hs;
|
|
unsigned int lsb, msb;
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL2(id),
|
|
LMK04832_BIT_DCLKX_Y_DDLY_PD,
|
|
FIELD_PREP(LMK04832_BIT_DCLKX_Y_DDLY_PD, 0));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_SYSREF_DDLY_LSB, &lsb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_SYSREF_DDLY_MSB, &msb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sysref_ddly = FIELD_GET(LMK04832_BIT_SYSREF_DDLY_MSB, msb) << 8 | lsb;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL0(id), &lsb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL2(id), &msb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dclkx_y_div = FIELD_GET(LMK04832_BIT_DCLK_DIV_MSB, msb) << 8 | lsb;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL3(id), &lsb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dclkx_y_hs = FIELD_GET(LMK04832_BIT_DCLKX_Y_HS, lsb);
|
|
|
|
dclkx_y_ddly = sysref_ddly + 1 -
|
|
dclk_div_adj[dclkx_y_div < 6 ? dclkx_y_div : 7] -
|
|
dclkx_y_hs + sclkx_y_ddly;
|
|
|
|
if (dclkx_y_ddly < 7 || dclkx_y_ddly > 0x3fff) {
|
|
dev_err(lmk->dev, "DCLKX_Y_DDLY out of range (%d)\n",
|
|
dclkx_y_ddly);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_write(lmk->regmap,
|
|
LMK04832_REG_SCLKX_Y_DDLY(id),
|
|
FIELD_GET(LMK04832_BIT_SCLKX_Y_DDLY, sclkx_y_ddly));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_CLKOUT_CTRL1(id),
|
|
FIELD_GET(0x00ff, dclkx_y_ddly));
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_dbg(lmk->dev, "clkout%02u: sysref_ddly=%u, dclkx_y_ddly=%u, "
|
|
"dclk_div_adj=%+d, dclkx_y_hs=%u, sclkx_y_ddly=%u\n",
|
|
id, sysref_ddly, dclkx_y_ddly,
|
|
dclk_div_adj[dclkx_y_div < 6 ? dclkx_y_div : 7],
|
|
dclkx_y_hs, sclkx_y_ddly);
|
|
|
|
return regmap_update_bits(lmk->regmap, LMK04832_REG_CLKOUT_CTRL2(id),
|
|
LMK04832_BIT_DCLKX_Y_DDLY_MSB,
|
|
FIELD_GET(0x0300, dclkx_y_ddly));
|
|
}
|
|
|
|
/** lmk04832_sclk_sync - Establish deterministic phase relationship between sclk
|
|
* and dclk
|
|
*
|
|
* @lmk: Reference to the lmk device
|
|
*
|
|
* The synchronization sequence:
|
|
* - in the datasheet https://www.ti.com/lit/ds/symlink/lmk04832.pdf, p.31
|
|
* (8.3.3.1 How to enable SYSREF)
|
|
* - Ti forum: https://e2e.ti.com/support/clock-and-timing/f/48/t/970972
|
|
*
|
|
* Returns 0 or negative errno.
|
|
*/
|
|
static int lmk04832_sclk_sync_sequence(struct lmk04832 *lmk)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
/* 1. (optional) mute all sysref_outputs during synchronization */
|
|
/* 2. Enable and write device clock digital delay to applicable clocks */
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
|
|
LMK04832_BIT_SYSREF_DDLY_PD,
|
|
FIELD_PREP(LMK04832_BIT_SYSREF_DDLY_PD, 0));
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < lmk->clk_data->num; i += 2) {
|
|
ret = lmk04832_clkout_set_ddly(lmk, i);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* 3. Configure SYNC_MODE to SYNC_PIN and SYSREF_MUX to Normal SYNC,
|
|
* and clear SYSREF_REQ_EN (see 6.)
|
|
*/
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYSREF_OUT,
|
|
LMK04832_BIT_SYSREF_REQ_EN |
|
|
LMK04832_BIT_SYSREF_MUX,
|
|
FIELD_PREP(LMK04832_BIT_SYSREF_REQ_EN, 0) |
|
|
FIELD_PREP(LMK04832_BIT_SYSREF_MUX,
|
|
LMK04832_VAL_SYSREF_MUX_NORMAL_SYNC));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
|
|
LMK04832_BIT_SYNC_MODE,
|
|
FIELD_PREP(LMK04832_BIT_SYNC_MODE,
|
|
LMK04832_VAL_SYNC_MODE_ON));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 4. Clear SYNXC_DISx or applicable clocks and clear SYNC_DISSYSREF */
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_SYNC_DIS, 0x00);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* 5. If SCLKX_Y_DDLY != 0, Set SYSREF_CLR=1 for at least 15 clock
|
|
* distribution path cycles (VCO cycles), then back to 0. In
|
|
* PLL2-only use case, this will be complete in less than one SPI
|
|
* transaction. If SYSREF local digital delay is not used, this step
|
|
* can be skipped.
|
|
*/
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
|
|
LMK04832_BIT_SYNC_CLR,
|
|
FIELD_PREP(LMK04832_BIT_SYNC_CLR, 0x01));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
|
|
LMK04832_BIT_SYNC_CLR,
|
|
FIELD_PREP(LMK04832_BIT_SYNC_CLR, 0x00));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* 6. Toggle SYNC_POL state between inverted and not inverted.
|
|
* If you use an external signal on the SYNC pin instead of toggling
|
|
* SYNC_POL, make sure that SYSREF_REQ_EN=0 so that the SYSREF_MUX
|
|
* does not shift into continuous SYSREF mode.
|
|
*/
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
|
|
LMK04832_BIT_SYNC_POL,
|
|
FIELD_PREP(LMK04832_BIT_SYNC_POL, 0x01));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
|
|
LMK04832_BIT_SYNC_POL,
|
|
FIELD_PREP(LMK04832_BIT_SYNC_POL, 0x00));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 7. Set all SYNC_DISx=1, including SYNC_DISSYSREF */
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_SYNC_DIS, 0xff);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 8. Restore state of SYNC_MODE and SYSREF_MUX to desired values */
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYSREF_OUT,
|
|
LMK04832_BIT_SYSREF_MUX,
|
|
FIELD_PREP(LMK04832_BIT_SYSREF_MUX,
|
|
lmk->sysref_mux));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYNC,
|
|
LMK04832_BIT_SYNC_MODE,
|
|
FIELD_PREP(LMK04832_BIT_SYNC_MODE,
|
|
lmk->sync_mode));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* 9. (optional) if SCLKx_y_DIS_MODE was used to mute SYSREF outputs
|
|
* during the SYNC event, restore SCLKx_y_DIS_MODE=0 for active state,
|
|
* or set SYSREF_GBL_PD=0 if SCLKx_y_DIS_MODE is set to a conditional
|
|
* option.
|
|
*/
|
|
|
|
/*
|
|
* 10. (optional) To reduce power consumption, after the synchronization
|
|
* event is complete, DCLKx_y_DDLY_PD=1 and SYSREF_DDLY_PD=1 disable the
|
|
* digital delay counters (which are only used immediately after the
|
|
* SYNC pulse to delay the output by some number of VCO counts).
|
|
*/
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lmk04832_sclk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
|
|
unsigned int tmp;
|
|
int ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_MAIN_PD, &tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return FIELD_GET(LMK04832_BIT_SYSREF_PD, tmp);
|
|
}
|
|
|
|
static int lmk04832_sclk_prepare(struct clk_hw *hw)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
|
|
|
|
return regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
|
|
LMK04832_BIT_SYSREF_PD, 0x00);
|
|
}
|
|
|
|
static void lmk04832_sclk_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
|
|
|
|
regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
|
|
LMK04832_BIT_SYSREF_PD, LMK04832_BIT_SYSREF_PD);
|
|
}
|
|
|
|
static unsigned long lmk04832_sclk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long prate)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
|
|
unsigned int sysref_div;
|
|
u8 tmp[2];
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(lmk->regmap, LMK04832_REG_SYSREF_DIV_MSB, &tmp, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sysref_div = FIELD_GET(LMK04832_BIT_SYSREF_DIV_MSB, tmp[0]) << 8 |
|
|
tmp[1];
|
|
|
|
return DIV_ROUND_CLOSEST(prate, sysref_div);
|
|
}
|
|
|
|
static long lmk04832_sclk_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
|
|
unsigned long sclk_rate;
|
|
unsigned int sysref_div;
|
|
|
|
sysref_div = DIV_ROUND_CLOSEST(*prate, rate);
|
|
sclk_rate = DIV_ROUND_CLOSEST(*prate, sysref_div);
|
|
|
|
if (sysref_div < 0x07 || sysref_div > 0x1fff) {
|
|
dev_err(lmk->dev, "SYSREF divider out of range\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (rate != sclk_rate)
|
|
return -EINVAL;
|
|
|
|
return sclk_rate;
|
|
}
|
|
|
|
static int lmk04832_sclk_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long prate)
|
|
{
|
|
struct lmk04832 *lmk = container_of(hw, struct lmk04832, sclk);
|
|
unsigned int sysref_div;
|
|
int ret;
|
|
|
|
sysref_div = DIV_ROUND_CLOSEST(prate, rate);
|
|
|
|
if (sysref_div < 0x07 || sysref_div > 0x1fff) {
|
|
dev_err(lmk->dev, "SYSREF divider out of range\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DIV_MSB,
|
|
FIELD_GET(0x1f00, sysref_div));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DIV_LSB,
|
|
FIELD_GET(0x00ff, sysref_div));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lmk04832_sclk_sync_sequence(lmk);
|
|
if (ret)
|
|
dev_err(lmk->dev, "SYNC sequence failed\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct clk_ops lmk04832_sclk_ops = {
|
|
.is_enabled = lmk04832_sclk_is_enabled,
|
|
.prepare = lmk04832_sclk_prepare,
|
|
.unprepare = lmk04832_sclk_unprepare,
|
|
.recalc_rate = lmk04832_sclk_recalc_rate,
|
|
.round_rate = lmk04832_sclk_round_rate,
|
|
.set_rate = lmk04832_sclk_set_rate,
|
|
};
|
|
|
|
static int lmk04832_register_sclk(struct lmk04832 *lmk)
|
|
{
|
|
const char *parent_names[1];
|
|
struct clk_init_data init;
|
|
int ret;
|
|
|
|
init.name = "lmk-sclk";
|
|
parent_names[0] = clk_hw_get_name(&lmk->vco);
|
|
init.parent_names = parent_names;
|
|
|
|
init.ops = &lmk04832_sclk_ops;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
init.num_parents = 1;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_SYSREF_OUT,
|
|
LMK04832_BIT_SYSREF_MUX,
|
|
FIELD_PREP(LMK04832_BIT_SYSREF_MUX,
|
|
lmk->sysref_mux));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DDLY_LSB,
|
|
FIELD_GET(0x00ff, lmk->sysref_ddly));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_DDLY_MSB,
|
|
FIELD_GET(0x1f00, lmk->sysref_ddly));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_SYSREF_PULSE_CNT,
|
|
ilog2(lmk->sysref_pulse_cnt));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap, LMK04832_REG_MAIN_PD,
|
|
LMK04832_BIT_SYSREF_DDLY_PD |
|
|
LMK04832_BIT_SYSREF_PLSR_PD,
|
|
FIELD_PREP(LMK04832_BIT_SYSREF_DDLY_PD, 0) |
|
|
FIELD_PREP(LMK04832_BIT_SYSREF_PLSR_PD, 0));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_SYNC,
|
|
FIELD_PREP(LMK04832_BIT_SYNC_POL, 0) |
|
|
FIELD_PREP(LMK04832_BIT_SYNC_EN, 1) |
|
|
FIELD_PREP(LMK04832_BIT_SYNC_MODE, lmk->sync_mode));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_SYNC_DIS, 0xff);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lmk->sclk.init = &init;
|
|
return devm_clk_hw_register(lmk->dev, &lmk->sclk);
|
|
}
|
|
|
|
static int lmk04832_dclk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
|
|
struct lmk04832 *lmk = dclk->lmk;
|
|
unsigned int tmp;
|
|
int ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL3(dclk->id),
|
|
&tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !FIELD_GET(LMK04832_BIT_DCLKX_Y_PD, tmp);
|
|
}
|
|
|
|
static int lmk04832_dclk_prepare(struct clk_hw *hw)
|
|
{
|
|
struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
|
|
struct lmk04832 *lmk = dclk->lmk;
|
|
|
|
return regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL3(dclk->id),
|
|
LMK04832_BIT_DCLKX_Y_PD, 0x00);
|
|
}
|
|
|
|
static void lmk04832_dclk_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
|
|
struct lmk04832 *lmk = dclk->lmk;
|
|
|
|
regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL3(dclk->id),
|
|
LMK04832_BIT_DCLKX_Y_PD, 0xff);
|
|
}
|
|
|
|
static unsigned long lmk04832_dclk_recalc_rate(struct clk_hw *hw,
|
|
unsigned long prate)
|
|
{
|
|
struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
|
|
struct lmk04832 *lmk = dclk->lmk;
|
|
unsigned int dclk_div;
|
|
unsigned int lsb, msb;
|
|
unsigned long rate;
|
|
int ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL0(dclk->id),
|
|
&lsb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL2(dclk->id),
|
|
&msb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dclk_div = FIELD_GET(LMK04832_BIT_DCLK_DIV_MSB, msb) << 8 | lsb;
|
|
rate = DIV_ROUND_CLOSEST(prate, dclk_div);
|
|
|
|
return rate;
|
|
};
|
|
|
|
static long lmk04832_dclk_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
|
|
struct lmk04832 *lmk = dclk->lmk;
|
|
unsigned long dclk_rate;
|
|
unsigned int dclk_div;
|
|
|
|
dclk_div = DIV_ROUND_CLOSEST(*prate, rate);
|
|
dclk_rate = DIV_ROUND_CLOSEST(*prate, dclk_div);
|
|
|
|
if (dclk_div < 1 || dclk_div > 0x3ff) {
|
|
dev_err(lmk->dev, "%s_div out of range\n", clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (rate != dclk_rate)
|
|
return -EINVAL;
|
|
|
|
return dclk_rate;
|
|
};
|
|
|
|
static int lmk04832_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long prate)
|
|
{
|
|
struct lmk_dclk *dclk = container_of(hw, struct lmk_dclk, hw);
|
|
struct lmk04832 *lmk = dclk->lmk;
|
|
unsigned int dclk_div;
|
|
int ret;
|
|
|
|
dclk_div = DIV_ROUND_CLOSEST(prate, rate);
|
|
|
|
if (dclk_div > 0x3ff) {
|
|
dev_err(lmk->dev, "%s_div out of range\n", clk_hw_get_name(hw));
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Enable Duty Cycle Correction */
|
|
if (dclk_div == 1) {
|
|
ret = regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL3(dclk->id),
|
|
LMK04832_BIT_DCLKX_Y_DCC,
|
|
FIELD_PREP(LMK04832_BIT_DCLKX_Y_DCC, 1));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* While using Divide-by-2 or Divide-by-3 for DCLK_X_Y_DIV, SYNC
|
|
* procedure requires to first program Divide-by-4 and then back to
|
|
* Divide-by-2 or Divide-by-3 before doing SYNC.
|
|
*/
|
|
if (dclk_div == 2 || dclk_div == 3) {
|
|
ret = regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL2(dclk->id),
|
|
LMK04832_BIT_DCLK_DIV_MSB, 0x00);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_write(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL0(dclk->id), 0x04);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_CLKOUT_CTRL0(dclk->id),
|
|
FIELD_GET(0x0ff, dclk_div));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL2(dclk->id),
|
|
LMK04832_BIT_DCLK_DIV_MSB,
|
|
FIELD_GET(0x300, dclk_div));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lmk04832_sclk_sync_sequence(lmk);
|
|
if (ret)
|
|
dev_err(lmk->dev, "SYNC sequence failed\n");
|
|
|
|
return ret;
|
|
};
|
|
|
|
static const struct clk_ops lmk04832_dclk_ops = {
|
|
.is_enabled = lmk04832_dclk_is_enabled,
|
|
.prepare = lmk04832_dclk_prepare,
|
|
.unprepare = lmk04832_dclk_unprepare,
|
|
.recalc_rate = lmk04832_dclk_recalc_rate,
|
|
.round_rate = lmk04832_dclk_round_rate,
|
|
.set_rate = lmk04832_dclk_set_rate,
|
|
};
|
|
|
|
static int lmk04832_clkout_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
|
|
struct lmk04832 *lmk = clkout->lmk;
|
|
unsigned int clkoutx_y_pd;
|
|
unsigned int sclkx_y_pd;
|
|
unsigned int tmp;
|
|
u32 enabled;
|
|
int ret;
|
|
u8 fmt;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_CTRL2(clkout->id),
|
|
&clkoutx_y_pd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
enabled = !FIELD_GET(LMK04832_BIT_CLKOUTX_Y_PD, clkoutx_y_pd);
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_SRC_MUX(clkout->id),
|
|
&tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (FIELD_GET(LMK04832_BIT_CLKOUT_SRC_MUX, tmp)) {
|
|
ret = regmap_read(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL4(clkout->id),
|
|
&sclkx_y_pd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
enabled = enabled && !FIELD_GET(LMK04832_BIT_SCLK_PD, sclkx_y_pd);
|
|
}
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_FMT(clkout->id),
|
|
&tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (clkout->id % 2)
|
|
fmt = FIELD_GET(0xf0, tmp);
|
|
else
|
|
fmt = FIELD_GET(0x0f, tmp);
|
|
|
|
return enabled && !fmt;
|
|
}
|
|
|
|
static int lmk04832_clkout_prepare(struct clk_hw *hw)
|
|
{
|
|
struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
|
|
struct lmk04832 *lmk = clkout->lmk;
|
|
unsigned int tmp;
|
|
int ret;
|
|
|
|
if (clkout->format == LMK04832_VAL_CLKOUT_FMT_POWERDOWN)
|
|
dev_err(lmk->dev, "prepared %s but format is powerdown\n",
|
|
clk_hw_get_name(hw));
|
|
|
|
ret = regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL2(clkout->id),
|
|
LMK04832_BIT_CLKOUTX_Y_PD, 0x00);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_SRC_MUX(clkout->id),
|
|
&tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (FIELD_GET(LMK04832_BIT_CLKOUT_SRC_MUX, tmp)) {
|
|
ret = regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_CTRL4(clkout->id),
|
|
LMK04832_BIT_SCLK_PD, 0x00);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_FMT(clkout->id),
|
|
LMK04832_BIT_CLKOUT_FMT(clkout->id),
|
|
clkout->format << 4 * (clkout->id % 2));
|
|
}
|
|
|
|
static void lmk04832_clkout_unprepare(struct clk_hw *hw)
|
|
{
|
|
struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
|
|
struct lmk04832 *lmk = clkout->lmk;
|
|
|
|
regmap_update_bits(lmk->regmap, LMK04832_REG_CLKOUT_FMT(clkout->id),
|
|
LMK04832_BIT_CLKOUT_FMT(clkout->id),
|
|
0x00);
|
|
}
|
|
|
|
static int lmk04832_clkout_set_parent(struct clk_hw *hw, uint8_t index)
|
|
{
|
|
struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
|
|
struct lmk04832 *lmk = clkout->lmk;
|
|
|
|
return regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_SRC_MUX(clkout->id),
|
|
LMK04832_BIT_CLKOUT_SRC_MUX,
|
|
FIELD_PREP(LMK04832_BIT_CLKOUT_SRC_MUX,
|
|
index));
|
|
}
|
|
|
|
static uint8_t lmk04832_clkout_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct lmk_clkout *clkout = container_of(hw, struct lmk_clkout, hw);
|
|
struct lmk04832 *lmk = clkout->lmk;
|
|
unsigned int tmp;
|
|
int ret;
|
|
|
|
ret = regmap_read(lmk->regmap, LMK04832_REG_CLKOUT_SRC_MUX(clkout->id),
|
|
&tmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return FIELD_GET(LMK04832_BIT_CLKOUT_SRC_MUX, tmp);
|
|
}
|
|
|
|
static const struct clk_ops lmk04832_clkout_ops = {
|
|
.is_enabled = lmk04832_clkout_is_enabled,
|
|
.prepare = lmk04832_clkout_prepare,
|
|
.unprepare = lmk04832_clkout_unprepare,
|
|
.set_parent = lmk04832_clkout_set_parent,
|
|
.get_parent = lmk04832_clkout_get_parent,
|
|
};
|
|
|
|
static int lmk04832_register_clkout(struct lmk04832 *lmk, const int num)
|
|
{
|
|
char name[] = "lmk-clkoutXX";
|
|
char dclk_name[] = "lmk-dclkXX_YY";
|
|
const char *parent_names[2];
|
|
struct clk_init_data init;
|
|
int dclk_num = num / 2;
|
|
int ret;
|
|
|
|
if (num % 2 == 0) {
|
|
sprintf(dclk_name, "lmk-dclk%02d_%02d", num, num + 1);
|
|
init.name = dclk_name;
|
|
parent_names[0] = clk_hw_get_name(&lmk->vco);
|
|
init.ops = &lmk04832_dclk_ops;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
init.num_parents = 1;
|
|
|
|
lmk->dclk[dclk_num].id = num;
|
|
lmk->dclk[dclk_num].lmk = lmk;
|
|
lmk->dclk[dclk_num].hw.init = &init;
|
|
|
|
ret = devm_clk_hw_register(lmk->dev, &lmk->dclk[dclk_num].hw);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
sprintf(dclk_name, "lmk-dclk%02d_%02d", num - 1, num);
|
|
}
|
|
|
|
if (of_property_read_string_index(lmk->dev->of_node,
|
|
"clock-output-names",
|
|
num, &init.name)) {
|
|
sprintf(name, "lmk-clkout%02d", num);
|
|
init.name = name;
|
|
}
|
|
|
|
parent_names[0] = dclk_name;
|
|
parent_names[1] = clk_hw_get_name(&lmk->sclk);
|
|
init.parent_names = parent_names;
|
|
init.ops = &lmk04832_clkout_ops;
|
|
init.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT;
|
|
init.num_parents = ARRAY_SIZE(parent_names);
|
|
|
|
lmk->clkout[num].id = num;
|
|
lmk->clkout[num].lmk = lmk;
|
|
lmk->clkout[num].hw.init = &init;
|
|
lmk->clk_data->hws[num] = &lmk->clkout[num].hw;
|
|
|
|
/* Set initial parent */
|
|
regmap_update_bits(lmk->regmap,
|
|
LMK04832_REG_CLKOUT_SRC_MUX(num),
|
|
LMK04832_BIT_CLKOUT_SRC_MUX,
|
|
FIELD_PREP(LMK04832_BIT_CLKOUT_SRC_MUX,
|
|
lmk->clkout[num].sysref));
|
|
|
|
return devm_clk_hw_register(lmk->dev, &lmk->clkout[num].hw);
|
|
}
|
|
|
|
static int lmk04832_set_spi_rdbk(const struct lmk04832 *lmk, const int rdbk_pin)
|
|
{
|
|
int reg;
|
|
int ret;
|
|
|
|
dev_info(lmk->dev, "setting up 4-wire mode\n");
|
|
ret = regmap_write(lmk->regmap, LMK04832_REG_RST3W,
|
|
LMK04832_BIT_SPI_3WIRE_DIS);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (rdbk_pin) {
|
|
case RDBK_CLKIN_SEL0:
|
|
reg = LMK04832_REG_CLKIN_SEL0;
|
|
break;
|
|
case RDBK_CLKIN_SEL1:
|
|
reg = LMK04832_REG_CLKIN_SEL1;
|
|
break;
|
|
case RDBK_RESET:
|
|
reg = LMK04832_REG_CLKIN_RST;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_write(lmk->regmap, reg,
|
|
FIELD_PREP(LMK04832_BIT_CLKIN_SEL_MUX,
|
|
LMK04832_VAL_CLKIN_SEL_MUX_SPI_RDBK) |
|
|
FIELD_PREP(LMK04832_BIT_CLKIN_SEL_TYPE,
|
|
LMK04832_VAL_CLKIN_SEL_TYPE_OUT));
|
|
}
|
|
|
|
static int lmk04832_probe(struct spi_device *spi)
|
|
{
|
|
const struct lmk04832_device_info *info;
|
|
int rdbk_pin = RDBK_CLKIN_SEL1;
|
|
struct device_node *child;
|
|
struct lmk04832 *lmk;
|
|
u8 tmp[3];
|
|
int ret;
|
|
int i;
|
|
|
|
info = &lmk04832_device_info[spi_get_device_id(spi)->driver_data];
|
|
|
|
lmk = devm_kzalloc(&spi->dev, sizeof(struct lmk04832), GFP_KERNEL);
|
|
if (!lmk)
|
|
return -ENOMEM;
|
|
|
|
lmk->dev = &spi->dev;
|
|
|
|
lmk->oscin = devm_clk_get(lmk->dev, "oscin");
|
|
if (IS_ERR(lmk->oscin)) {
|
|
dev_err(lmk->dev, "failed to get oscin clock\n");
|
|
return PTR_ERR(lmk->oscin);
|
|
}
|
|
|
|
ret = clk_prepare_enable(lmk->oscin);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lmk->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
|
|
lmk->dclk = devm_kcalloc(lmk->dev, info->num_channels >> 1,
|
|
sizeof(struct lmk_dclk), GFP_KERNEL);
|
|
if (!lmk->dclk) {
|
|
ret = -ENOMEM;
|
|
goto err_disable_oscin;
|
|
}
|
|
|
|
lmk->clkout = devm_kcalloc(lmk->dev, info->num_channels,
|
|
sizeof(*lmk->clkout), GFP_KERNEL);
|
|
if (!lmk->clkout) {
|
|
ret = -ENOMEM;
|
|
goto err_disable_oscin;
|
|
}
|
|
|
|
lmk->clk_data = devm_kzalloc(lmk->dev, struct_size(lmk->clk_data, hws,
|
|
info->num_channels),
|
|
GFP_KERNEL);
|
|
if (!lmk->clk_data) {
|
|
ret = -ENOMEM;
|
|
goto err_disable_oscin;
|
|
}
|
|
|
|
device_property_read_u32(lmk->dev, "ti,vco-hz", &lmk->vco_rate);
|
|
|
|
lmk->sysref_ddly = 8;
|
|
device_property_read_u32(lmk->dev, "ti,sysref-ddly", &lmk->sysref_ddly);
|
|
|
|
lmk->sysref_mux = LMK04832_VAL_SYSREF_MUX_CONTINUOUS;
|
|
device_property_read_u32(lmk->dev, "ti,sysref-mux",
|
|
&lmk->sysref_mux);
|
|
|
|
lmk->sync_mode = LMK04832_VAL_SYNC_MODE_OFF;
|
|
device_property_read_u32(lmk->dev, "ti,sync-mode",
|
|
&lmk->sync_mode);
|
|
|
|
lmk->sysref_pulse_cnt = 4;
|
|
device_property_read_u32(lmk->dev, "ti,sysref-pulse-count",
|
|
&lmk->sysref_pulse_cnt);
|
|
|
|
for_each_child_of_node(lmk->dev->of_node, child) {
|
|
int reg;
|
|
|
|
ret = of_property_read_u32(child, "reg", ®);
|
|
if (ret) {
|
|
dev_err(lmk->dev, "missing reg property in child: %s\n",
|
|
child->full_name);
|
|
of_node_put(child);
|
|
goto err_disable_oscin;
|
|
}
|
|
|
|
of_property_read_u32(child, "ti,clkout-fmt",
|
|
&lmk->clkout[reg].format);
|
|
|
|
if (lmk->clkout[reg].format >= 0x0a && reg % 2 == 0
|
|
&& reg != 8 && reg != 10)
|
|
dev_err(lmk->dev, "invalid format for clkout%02d\n",
|
|
reg);
|
|
|
|
lmk->clkout[reg].sysref =
|
|
of_property_read_bool(child, "ti,clkout-sysref");
|
|
}
|
|
|
|
lmk->regmap = devm_regmap_init_spi(spi, ®map_config);
|
|
if (IS_ERR(lmk->regmap)) {
|
|
dev_err(lmk->dev, "%s: regmap allocation failed: %ld\n",
|
|
|
|
__func__, PTR_ERR(lmk->regmap));
|
|
ret = PTR_ERR(lmk->regmap);
|
|
goto err_disable_oscin;
|
|
}
|
|
|
|
regmap_write(lmk->regmap, LMK04832_REG_RST3W, LMK04832_BIT_RESET);
|
|
|
|
if (!(spi->mode & SPI_3WIRE)) {
|
|
device_property_read_u32(lmk->dev, "ti,spi-4wire-rdbk",
|
|
&rdbk_pin);
|
|
ret = lmk04832_set_spi_rdbk(lmk, rdbk_pin);
|
|
if (ret)
|
|
goto err_disable_oscin;
|
|
}
|
|
|
|
regmap_bulk_read(lmk->regmap, LMK04832_REG_ID_PROD_MSB, &tmp, 3);
|
|
if ((tmp[0] << 8 | tmp[1]) != info->pid || tmp[2] != info->maskrev) {
|
|
dev_err(lmk->dev, "unsupported device type: pid 0x%04x, maskrev 0x%02x\n",
|
|
tmp[0] << 8 | tmp[1], tmp[2]);
|
|
ret = -EINVAL;
|
|
goto err_disable_oscin;
|
|
}
|
|
|
|
ret = lmk04832_register_vco(lmk);
|
|
if (ret) {
|
|
dev_err(lmk->dev, "failed to init device clock path\n");
|
|
goto err_disable_oscin;
|
|
}
|
|
|
|
if (lmk->vco_rate) {
|
|
dev_info(lmk->dev, "setting VCO rate to %u Hz\n", lmk->vco_rate);
|
|
ret = clk_set_rate(lmk->vco.clk, lmk->vco_rate);
|
|
if (ret) {
|
|
dev_err(lmk->dev, "failed to set VCO rate\n");
|
|
goto err_disable_vco;
|
|
}
|
|
}
|
|
|
|
ret = lmk04832_register_sclk(lmk);
|
|
if (ret) {
|
|
dev_err(lmk->dev, "failed to init SYNC/SYSREF clock path\n");
|
|
goto err_disable_vco;
|
|
}
|
|
|
|
for (i = 0; i < info->num_channels; i++) {
|
|
ret = lmk04832_register_clkout(lmk, i);
|
|
if (ret) {
|
|
dev_err(lmk->dev, "failed to register clk %d\n", i);
|
|
goto err_disable_vco;
|
|
}
|
|
}
|
|
|
|
lmk->clk_data->num = info->num_channels;
|
|
ret = of_clk_add_hw_provider(lmk->dev->of_node, of_clk_hw_onecell_get,
|
|
lmk->clk_data);
|
|
if (ret) {
|
|
dev_err(lmk->dev, "failed to add provider (%d)\n", ret);
|
|
goto err_disable_vco;
|
|
}
|
|
|
|
spi_set_drvdata(spi, lmk);
|
|
|
|
return 0;
|
|
|
|
err_disable_vco:
|
|
clk_disable_unprepare(lmk->vco.clk);
|
|
|
|
err_disable_oscin:
|
|
clk_disable_unprepare(lmk->oscin);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lmk04832_remove(struct spi_device *spi)
|
|
{
|
|
struct lmk04832 *lmk = spi_get_drvdata(spi);
|
|
|
|
clk_disable_unprepare(lmk->oscin);
|
|
of_clk_del_provider(spi->dev.of_node);
|
|
|
|
return 0;
|
|
}
|
|
static const struct spi_device_id lmk04832_id[] = {
|
|
{ "lmk04832", LMK04832 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, lmk04832_id);
|
|
|
|
static const struct of_device_id lmk04832_of_id[] = {
|
|
{ .compatible = "ti,lmk04832" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lmk04832_of_id);
|
|
|
|
static struct spi_driver lmk04832_driver = {
|
|
.driver = {
|
|
.name = "lmk04832",
|
|
.of_match_table = lmk04832_of_id,
|
|
},
|
|
.probe = lmk04832_probe,
|
|
.remove = lmk04832_remove,
|
|
.id_table = lmk04832_id,
|
|
};
|
|
module_spi_driver(lmk04832_driver);
|
|
|
|
MODULE_AUTHOR("Liam Beguin <lvb@xiphos.com>");
|
|
MODULE_DESCRIPTION("Texas Instruments LMK04832");
|
|
MODULE_LICENSE("GPL v2");
|