214 lines
8.0 KiB
ReStructuredText
214 lines
8.0 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
==============================================
|
|
Management Component Transport Protocol (MCTP)
|
|
==============================================
|
|
|
|
net/mctp/ contains protocol support for MCTP, as defined by DMTF standard
|
|
DSP0236. Physical interface drivers ("bindings" in the specification) are
|
|
provided in drivers/net/mctp/.
|
|
|
|
The core code provides a socket-based interface to send and receive MCTP
|
|
messages, through an AF_MCTP, SOCK_DGRAM socket.
|
|
|
|
Structure: interfaces & networks
|
|
================================
|
|
|
|
The kernel models the local MCTP topology through two items: interfaces and
|
|
networks.
|
|
|
|
An interface (or "link") is an instance of an MCTP physical transport binding
|
|
(as defined by DSP0236, section 3.2.47), likely connected to a specific hardware
|
|
device. This is represented as a ``struct netdevice``.
|
|
|
|
A network defines a unique address space for MCTP endpoints by endpoint-ID
|
|
(described by DSP0236, section 3.2.31). A network has a user-visible identifier
|
|
to allow references from userspace. Route definitions are specific to one
|
|
network.
|
|
|
|
Interfaces are associated with one network. A network may be associated with one
|
|
or more interfaces.
|
|
|
|
If multiple networks are present, each may contain endpoint IDs (EIDs) that are
|
|
also present on other networks.
|
|
|
|
Sockets API
|
|
===========
|
|
|
|
Protocol definitions
|
|
--------------------
|
|
|
|
MCTP uses ``AF_MCTP`` / ``PF_MCTP`` for the address- and protocol- families.
|
|
Since MCTP is message-based, only ``SOCK_DGRAM`` sockets are supported.
|
|
|
|
.. code-block:: C
|
|
|
|
int sd = socket(AF_MCTP, SOCK_DGRAM, 0);
|
|
|
|
The only (current) value for the ``protocol`` argument is 0.
|
|
|
|
As with all socket address families, source and destination addresses are
|
|
specified with a ``sockaddr`` type, with a single-byte endpoint address:
|
|
|
|
.. code-block:: C
|
|
|
|
typedef __u8 mctp_eid_t;
|
|
|
|
struct mctp_addr {
|
|
mctp_eid_t s_addr;
|
|
};
|
|
|
|
struct sockaddr_mctp {
|
|
__kernel_sa_family_t smctp_family;
|
|
unsigned int smctp_network;
|
|
struct mctp_addr smctp_addr;
|
|
__u8 smctp_type;
|
|
__u8 smctp_tag;
|
|
};
|
|
|
|
#define MCTP_NET_ANY 0x0
|
|
#define MCTP_ADDR_ANY 0xff
|
|
|
|
|
|
Syscall behaviour
|
|
-----------------
|
|
|
|
The following sections describe the MCTP-specific behaviours of the standard
|
|
socket system calls. These behaviours have been chosen to map closely to the
|
|
existing sockets APIs.
|
|
|
|
``bind()`` : set local socket address
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Sockets that receive incoming request packets will bind to a local address,
|
|
using the ``bind()`` syscall.
|
|
|
|
.. code-block:: C
|
|
|
|
struct sockaddr_mctp addr;
|
|
|
|
addr.smctp_family = AF_MCTP;
|
|
addr.smctp_network = MCTP_NET_ANY;
|
|
addr.smctp_addr.s_addr = MCTP_ADDR_ANY;
|
|
addr.smctp_type = MCTP_TYPE_PLDM;
|
|
addr.smctp_tag = MCTP_TAG_OWNER;
|
|
|
|
int rc = bind(sd, (struct sockaddr *)&addr, sizeof(addr));
|
|
|
|
This establishes the local address of the socket. Incoming MCTP messages that
|
|
match the network, address, and message type will be received by this socket.
|
|
The reference to 'incoming' is important here; a bound socket will only receive
|
|
messages with the TO bit set, to indicate an incoming request message, rather
|
|
than a response.
|
|
|
|
The ``smctp_tag`` value will configure the tags accepted from the remote side of
|
|
this socket. Given the above, the only valid value is ``MCTP_TAG_OWNER``, which
|
|
will result in remotely "owned" tags being routed to this socket. Since
|
|
``MCTP_TAG_OWNER`` is set, the 3 least-significant bits of ``smctp_tag`` are not
|
|
used; callers must set them to zero.
|
|
|
|
A ``smctp_network`` value of ``MCTP_NET_ANY`` will configure the socket to
|
|
receive incoming packets from any locally-connected network. A specific network
|
|
value will cause the socket to only receive incoming messages from that network.
|
|
|
|
The ``smctp_addr`` field specifies a local address to bind to. A value of
|
|
``MCTP_ADDR_ANY`` configures the socket to receive messages addressed to any
|
|
local destination EID.
|
|
|
|
The ``smctp_type`` field specifies which message types to receive. Only the
|
|
lower 7 bits of the type is matched on incoming messages (ie., the
|
|
most-significant IC bit is not part of the match). This results in the socket
|
|
receiving packets with and without a message integrity check footer.
|
|
|
|
``sendto()``, ``sendmsg()``, ``send()`` : transmit an MCTP message
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
An MCTP message is transmitted using one of the ``sendto()``, ``sendmsg()`` or
|
|
``send()`` syscalls. Using ``sendto()`` as the primary example:
|
|
|
|
.. code-block:: C
|
|
|
|
struct sockaddr_mctp addr;
|
|
char buf[14];
|
|
ssize_t len;
|
|
|
|
/* set message destination */
|
|
addr.smctp_family = AF_MCTP;
|
|
addr.smctp_network = 0;
|
|
addr.smctp_addr.s_addr = 8;
|
|
addr.smctp_tag = MCTP_TAG_OWNER;
|
|
addr.smctp_type = MCTP_TYPE_ECHO;
|
|
|
|
/* arbitrary message to send, with message-type header */
|
|
buf[0] = MCTP_TYPE_ECHO;
|
|
memcpy(buf + 1, "hello, world!", sizeof(buf) - 1);
|
|
|
|
len = sendto(sd, buf, sizeof(buf), 0,
|
|
(struct sockaddr_mctp *)&addr, sizeof(addr));
|
|
|
|
The network and address fields of ``addr`` define the remote address to send to.
|
|
If ``smctp_tag`` has the ``MCTP_TAG_OWNER``, the kernel will ignore any bits set
|
|
in ``MCTP_TAG_VALUE``, and generate a tag value suitable for the destination
|
|
EID. If ``MCTP_TAG_OWNER`` is not set, the message will be sent with the tag
|
|
value as specified. If a tag value cannot be allocated, the system call will
|
|
report an errno of ``EAGAIN``.
|
|
|
|
The application must provide the message type byte as the first byte of the
|
|
message buffer passed to ``sendto()``. If a message integrity check is to be
|
|
included in the transmitted message, it must also be provided in the message
|
|
buffer, and the most-significant bit of the message type byte must be 1.
|
|
|
|
The ``sendmsg()`` system call allows a more compact argument interface, and the
|
|
message buffer to be specified as a scatter-gather list. At present no ancillary
|
|
message types (used for the ``msg_control`` data passed to ``sendmsg()``) are
|
|
defined.
|
|
|
|
Transmitting a message on an unconnected socket with ``MCTP_TAG_OWNER``
|
|
specified will cause an allocation of a tag, if no valid tag is already
|
|
allocated for that destination. The (destination-eid,tag) tuple acts as an
|
|
implicit local socket address, to allow the socket to receive responses to this
|
|
outgoing message. If any previous allocation has been performed (to for a
|
|
different remote EID), that allocation is lost.
|
|
|
|
Sockets will only receive responses to requests they have sent (with TO=1) and
|
|
may only respond (with TO=0) to requests they have received.
|
|
|
|
``recvfrom()``, ``recvmsg()``, ``recv()`` : receive an MCTP message
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
An MCTP message can be received by an application using one of the
|
|
``recvfrom()``, ``recvmsg()``, or ``recv()`` system calls. Using ``recvfrom()``
|
|
as the primary example:
|
|
|
|
.. code-block:: C
|
|
|
|
struct sockaddr_mctp addr;
|
|
socklen_t addrlen;
|
|
char buf[14];
|
|
ssize_t len;
|
|
|
|
addrlen = sizeof(addr);
|
|
|
|
len = recvfrom(sd, buf, sizeof(buf), 0,
|
|
(struct sockaddr_mctp *)&addr, &addrlen);
|
|
|
|
/* We can expect addr to describe an MCTP address */
|
|
assert(addrlen >= sizeof(buf));
|
|
assert(addr.smctp_family == AF_MCTP);
|
|
|
|
printf("received %zd bytes from remote EID %d\n", rc, addr.smctp_addr);
|
|
|
|
The address argument to ``recvfrom`` and ``recvmsg`` is populated with the
|
|
remote address of the incoming message, including tag value (this will be needed
|
|
in order to reply to the message).
|
|
|
|
The first byte of the message buffer will contain the message type byte. If an
|
|
integrity check follows the message, it will be included in the received buffer.
|
|
|
|
The ``recv()`` system call behaves in a similar way, but does not provide a
|
|
remote address to the application. Therefore, these are only useful if the
|
|
remote address is already known, or the message does not require a reply.
|
|
|
|
Like the send calls, sockets will only receive responses to requests they have
|
|
sent (TO=1) and may only respond (TO=0) to requests they have received.
|