120 lines
4.2 KiB
ReStructuredText
120 lines
4.2 KiB
ReStructuredText
.. _amu_index:
|
|
|
|
=======================================================
|
|
Activity Monitors Unit (AMU) extension in AArch64 Linux
|
|
=======================================================
|
|
|
|
Author: Ionela Voinescu <ionela.voinescu@arm.com>
|
|
|
|
Date: 2019-09-10
|
|
|
|
This document briefly describes the provision of Activity Monitors Unit
|
|
support in AArch64 Linux.
|
|
|
|
|
|
Architecture overview
|
|
---------------------
|
|
|
|
The activity monitors extension is an optional extension introduced by the
|
|
ARMv8.4 CPU architecture.
|
|
|
|
The activity monitors unit, implemented in each CPU, provides performance
|
|
counters intended for system management use. The AMU extension provides a
|
|
system register interface to the counter registers and also supports an
|
|
optional external memory-mapped interface.
|
|
|
|
Version 1 of the Activity Monitors architecture implements a counter group
|
|
of four fixed and architecturally defined 64-bit event counters.
|
|
|
|
- CPU cycle counter: increments at the frequency of the CPU.
|
|
- Constant counter: increments at the fixed frequency of the system
|
|
clock.
|
|
- Instructions retired: increments with every architecturally executed
|
|
instruction.
|
|
- Memory stall cycles: counts instruction dispatch stall cycles caused by
|
|
misses in the last level cache within the clock domain.
|
|
|
|
When in WFI or WFE these counters do not increment.
|
|
|
|
The Activity Monitors architecture provides space for up to 16 architected
|
|
event counters. Future versions of the architecture may use this space to
|
|
implement additional architected event counters.
|
|
|
|
Additionally, version 1 implements a counter group of up to 16 auxiliary
|
|
64-bit event counters.
|
|
|
|
On cold reset all counters reset to 0.
|
|
|
|
|
|
Basic support
|
|
-------------
|
|
|
|
The kernel can safely run a mix of CPUs with and without support for the
|
|
activity monitors extension. Therefore, when CONFIG_ARM64_AMU_EXTN is
|
|
selected we unconditionally enable the capability to allow any late CPU
|
|
(secondary or hotplugged) to detect and use the feature.
|
|
|
|
When the feature is detected on a CPU, we flag the availability of the
|
|
feature but this does not guarantee the correct functionality of the
|
|
counters, only the presence of the extension.
|
|
|
|
Firmware (code running at higher exception levels, e.g. arm-tf) support is
|
|
needed to:
|
|
|
|
- Enable access for lower exception levels (EL2 and EL1) to the AMU
|
|
registers.
|
|
- Enable the counters. If not enabled these will read as 0.
|
|
- Save/restore the counters before/after the CPU is being put/brought up
|
|
from the 'off' power state.
|
|
|
|
When using kernels that have this feature enabled but boot with broken
|
|
firmware the user may experience panics or lockups when accessing the
|
|
counter registers. Even if these symptoms are not observed, the values
|
|
returned by the register reads might not correctly reflect reality. Most
|
|
commonly, the counters will read as 0, indicating that they are not
|
|
enabled.
|
|
|
|
If proper support is not provided in firmware it's best to disable
|
|
CONFIG_ARM64_AMU_EXTN. To be noted that for security reasons, this does not
|
|
bypass the setting of AMUSERENR_EL0 to trap accesses from EL0 (userspace) to
|
|
EL1 (kernel). Therefore, firmware should still ensure accesses to AMU registers
|
|
are not trapped in EL2/EL3.
|
|
|
|
The fixed counters of AMUv1 are accessible though the following system
|
|
register definitions:
|
|
|
|
- SYS_AMEVCNTR0_CORE_EL0
|
|
- SYS_AMEVCNTR0_CONST_EL0
|
|
- SYS_AMEVCNTR0_INST_RET_EL0
|
|
- SYS_AMEVCNTR0_MEM_STALL_EL0
|
|
|
|
Auxiliary platform specific counters can be accessed using
|
|
SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
|
|
|
|
Details can be found in: arch/arm64/include/asm/sysreg.h.
|
|
|
|
|
|
Userspace access
|
|
----------------
|
|
|
|
Currently, access from userspace to the AMU registers is disabled due to:
|
|
|
|
- Security reasons: they might expose information about code executed in
|
|
secure mode.
|
|
- Purpose: AMU counters are intended for system management use.
|
|
|
|
Also, the presence of the feature is not visible to userspace.
|
|
|
|
|
|
Virtualization
|
|
--------------
|
|
|
|
Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
|
|
guest side is disabled due to:
|
|
|
|
- Security reasons: they might expose information about code executed
|
|
by other guests or the host.
|
|
|
|
Any attempt to access the AMU registers will result in an UNDEFINED
|
|
exception being injected into the guest.
|