/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 2007, 2008, 2009, 2010, 2011 Cavium Networks */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define MRRS_CN5XXX 0 /* 128 byte Max Read Request Size */ #define MPS_CN5XXX 0 /* 128 byte Max Packet Size (Limit of most PCs) */ #define MRRS_CN6XXX 3 /* 1024 byte Max Read Request Size */ #define MPS_CN6XXX 0 /* 128 byte Max Packet Size (Limit of most PCs) */ /* Module parameter to disable PCI probing */ static int pcie_disable; module_param(pcie_disable, int, S_IRUGO); static int enable_pcie_14459_war; static int enable_pcie_bus_num_war[2]; union cvmx_pcie_address { uint64_t u64; struct { uint64_t upper:2; /* Normally 2 for XKPHYS */ uint64_t reserved_49_61:13; /* Must be zero */ uint64_t io:1; /* 1 for IO space access */ uint64_t did:5; /* PCIe DID = 3 */ uint64_t subdid:3; /* PCIe SubDID = 1 */ uint64_t reserved_36_39:4; /* Must be zero */ uint64_t es:2; /* Endian swap = 1 */ uint64_t port:2; /* PCIe port 0,1 */ uint64_t reserved_29_31:3; /* Must be zero */ /* * Selects the type of the configuration request (0 = type 0, * 1 = type 1). */ uint64_t ty:1; /* Target bus number sent in the ID in the request. */ uint64_t bus:8; /* * Target device number sent in the ID in the * request. Note that Dev must be zero for type 0 * configuration requests. */ uint64_t dev:5; /* Target function number sent in the ID in the request. */ uint64_t func:3; /* * Selects a register in the configuration space of * the target. */ uint64_t reg:12; } config; struct { uint64_t upper:2; /* Normally 2 for XKPHYS */ uint64_t reserved_49_61:13; /* Must be zero */ uint64_t io:1; /* 1 for IO space access */ uint64_t did:5; /* PCIe DID = 3 */ uint64_t subdid:3; /* PCIe SubDID = 2 */ uint64_t reserved_36_39:4; /* Must be zero */ uint64_t es:2; /* Endian swap = 1 */ uint64_t port:2; /* PCIe port 0,1 */ uint64_t address:32; /* PCIe IO address */ } io; struct { uint64_t upper:2; /* Normally 2 for XKPHYS */ uint64_t reserved_49_61:13; /* Must be zero */ uint64_t io:1; /* 1 for IO space access */ uint64_t did:5; /* PCIe DID = 3 */ uint64_t subdid:3; /* PCIe SubDID = 3-6 */ uint64_t reserved_36_39:4; /* Must be zero */ uint64_t address:36; /* PCIe Mem address */ } mem; }; static int cvmx_pcie_rc_initialize(int pcie_port); /** * Return the Core virtual base address for PCIe IO access. IOs are * read/written as an offset from this address. * * @pcie_port: PCIe port the IO is for * * Returns 64bit Octeon IO base address for read/write */ static inline uint64_t cvmx_pcie_get_io_base_address(int pcie_port) { union cvmx_pcie_address pcie_addr; pcie_addr.u64 = 0; pcie_addr.io.upper = 0; pcie_addr.io.io = 1; pcie_addr.io.did = 3; pcie_addr.io.subdid = 2; pcie_addr.io.es = 1; pcie_addr.io.port = pcie_port; return pcie_addr.u64; } /** * Size of the IO address region returned at address * cvmx_pcie_get_io_base_address() * * @pcie_port: PCIe port the IO is for * * Returns Size of the IO window */ static inline uint64_t cvmx_pcie_get_io_size(int pcie_port) { return 1ull << 32; } /** * Return the Core virtual base address for PCIe MEM access. Memory is * read/written as an offset from this address. * * @pcie_port: PCIe port the IO is for * * Returns 64bit Octeon IO base address for read/write */ static inline uint64_t cvmx_pcie_get_mem_base_address(int pcie_port) { union cvmx_pcie_address pcie_addr; pcie_addr.u64 = 0; pcie_addr.mem.upper = 0; pcie_addr.mem.io = 1; pcie_addr.mem.did = 3; pcie_addr.mem.subdid = 3 + pcie_port; return pcie_addr.u64; } /** * Size of the Mem address region returned at address * cvmx_pcie_get_mem_base_address() * * @pcie_port: PCIe port the IO is for * * Returns Size of the Mem window */ static inline uint64_t cvmx_pcie_get_mem_size(int pcie_port) { return 1ull << 36; } /** * Read a PCIe config space register indirectly. This is used for * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. * * @pcie_port: PCIe port to read from * @cfg_offset: Address to read * * Returns Value read */ static uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset) { if (octeon_has_feature(OCTEON_FEATURE_NPEI)) { union cvmx_pescx_cfg_rd pescx_cfg_rd; pescx_cfg_rd.u64 = 0; pescx_cfg_rd.s.addr = cfg_offset; cvmx_write_csr(CVMX_PESCX_CFG_RD(pcie_port), pescx_cfg_rd.u64); pescx_cfg_rd.u64 = cvmx_read_csr(CVMX_PESCX_CFG_RD(pcie_port)); return pescx_cfg_rd.s.data; } else { union cvmx_pemx_cfg_rd pemx_cfg_rd; pemx_cfg_rd.u64 = 0; pemx_cfg_rd.s.addr = cfg_offset; cvmx_write_csr(CVMX_PEMX_CFG_RD(pcie_port), pemx_cfg_rd.u64); pemx_cfg_rd.u64 = cvmx_read_csr(CVMX_PEMX_CFG_RD(pcie_port)); return pemx_cfg_rd.s.data; } } /** * Write a PCIe config space register indirectly. This is used for * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. * * @pcie_port: PCIe port to write to * @cfg_offset: Address to write * @val: Value to write */ static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset, uint32_t val) { if (octeon_has_feature(OCTEON_FEATURE_NPEI)) { union cvmx_pescx_cfg_wr pescx_cfg_wr; pescx_cfg_wr.u64 = 0; pescx_cfg_wr.s.addr = cfg_offset; pescx_cfg_wr.s.data = val; cvmx_write_csr(CVMX_PESCX_CFG_WR(pcie_port), pescx_cfg_wr.u64); } else { union cvmx_pemx_cfg_wr pemx_cfg_wr; pemx_cfg_wr.u64 = 0; pemx_cfg_wr.s.addr = cfg_offset; pemx_cfg_wr.s.data = val; cvmx_write_csr(CVMX_PEMX_CFG_WR(pcie_port), pemx_cfg_wr.u64); } } /** * Build a PCIe config space request address for a device * * @pcie_port: PCIe port to access * @bus: Sub bus * @dev: Device ID * @fn: Device sub function * @reg: Register to access * * Returns 64bit Octeon IO address */ static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus, int dev, int fn, int reg) { union cvmx_pcie_address pcie_addr; union cvmx_pciercx_cfg006 pciercx_cfg006; union cvmx_pciercx_cfg032 pciercx_cfg032; pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port)); if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0)) return 0; pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); if ((pciercx_cfg032.s.dlla == 0) || (pciercx_cfg032.s.lt == 1)) return 0; pcie_addr.u64 = 0; pcie_addr.config.upper = 2; pcie_addr.config.io = 1; pcie_addr.config.did = 3; pcie_addr.config.subdid = 1; pcie_addr.config.es = 1; pcie_addr.config.port = pcie_port; pcie_addr.config.ty = (bus > pciercx_cfg006.s.pbnum); pcie_addr.config.bus = bus; pcie_addr.config.dev = dev; pcie_addr.config.func = fn; pcie_addr.config.reg = reg; return pcie_addr.u64; } /** * Read 8bits from a Device's config space * * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID * @fn: Device sub function * @reg: Register to access * * Returns Result of the read */ static uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, int fn, int reg) { uint64_t address = __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); if (address) return cvmx_read64_uint8(address); else return 0xff; } /** * Read 16bits from a Device's config space * * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID * @fn: Device sub function * @reg: Register to access * * Returns Result of the read */ static uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev, int fn, int reg) { uint64_t address = __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); if (address) return le16_to_cpu(cvmx_read64_uint16(address)); else return 0xffff; } /** * Read 32bits from a Device's config space * * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID * @fn: Device sub function * @reg: Register to access * * Returns Result of the read */ static uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev, int fn, int reg) { uint64_t address = __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); if (address) return le32_to_cpu(cvmx_read64_uint32(address)); else return 0xffffffff; } /** * Write 8bits to a Device's config space * * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID * @fn: Device sub function * @reg: Register to access * @val: Value to write */ static void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn, int reg, uint8_t val) { uint64_t address = __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); if (address) cvmx_write64_uint8(address, val); } /** * Write 16bits to a Device's config space * * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID * @fn: Device sub function * @reg: Register to access * @val: Value to write */ static void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn, int reg, uint16_t val) { uint64_t address = __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); if (address) cvmx_write64_uint16(address, cpu_to_le16(val)); } /** * Write 32bits to a Device's config space * * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID * @fn: Device sub function * @reg: Register to access * @val: Value to write */ static void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn, int reg, uint32_t val) { uint64_t address = __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg); if (address) cvmx_write64_uint32(address, cpu_to_le32(val)); } /** * Initialize the RC config space CSRs * * @pcie_port: PCIe port to initialize */ static void __cvmx_pcie_rc_initialize_config_space(int pcie_port) { union cvmx_pciercx_cfg030 pciercx_cfg030; union cvmx_pciercx_cfg070 pciercx_cfg070; union cvmx_pciercx_cfg001 pciercx_cfg001; union cvmx_pciercx_cfg032 pciercx_cfg032; union cvmx_pciercx_cfg006 pciercx_cfg006; union cvmx_pciercx_cfg008 pciercx_cfg008; union cvmx_pciercx_cfg009 pciercx_cfg009; union cvmx_pciercx_cfg010 pciercx_cfg010; union cvmx_pciercx_cfg011 pciercx_cfg011; union cvmx_pciercx_cfg035 pciercx_cfg035; union cvmx_pciercx_cfg075 pciercx_cfg075; union cvmx_pciercx_cfg034 pciercx_cfg034; /* Max Payload Size (PCIE*_CFG030[MPS]) */ /* Max Read Request Size (PCIE*_CFG030[MRRS]) */ /* Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] */ /* Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) */ pciercx_cfg030.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port)); if (OCTEON_IS_MODEL(OCTEON_CN5XXX)) { pciercx_cfg030.s.mps = MPS_CN5XXX; pciercx_cfg030.s.mrrs = MRRS_CN5XXX; } else { pciercx_cfg030.s.mps = MPS_CN6XXX; pciercx_cfg030.s.mrrs = MRRS_CN6XXX; } /* * Enable relaxed order processing. This will allow devices to * affect read response ordering. */ pciercx_cfg030.s.ro_en = 1; /* Enable no snoop processing. Not used by Octeon */ pciercx_cfg030.s.ns_en = 1; /* Correctable error reporting enable. */ pciercx_cfg030.s.ce_en = 1; /* Non-fatal error reporting enable. */ pciercx_cfg030.s.nfe_en = 1; /* Fatal error reporting enable. */ pciercx_cfg030.s.fe_en = 1; /* Unsupported request reporting enable. */ pciercx_cfg030.s.ur_en = 1; cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port), pciercx_cfg030.u32); if (octeon_has_feature(OCTEON_FEATURE_NPEI)) { union cvmx_npei_ctl_status2 npei_ctl_status2; /* * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match * PCIE*_CFG030[MPS]. Max Read Request Size * (NPEI_CTL_STATUS2[MRRS]) must not exceed * PCIE*_CFG030[MRRS] */ npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2); /* Max payload size = 128 bytes for best Octeon DMA performance */ npei_ctl_status2.s.mps = MPS_CN5XXX; /* Max read request size = 128 bytes for best Octeon DMA performance */ npei_ctl_status2.s.mrrs = MRRS_CN5XXX; if (pcie_port) npei_ctl_status2.s.c1_b1_s = 3; /* Port1 BAR1 Size 256MB */ else npei_ctl_status2.s.c0_b1_s = 3; /* Port0 BAR1 Size 256MB */ cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64); } else { /* * Max Payload Size (DPI_SLI_PRTX_CFG[MPS]) must match * PCIE*_CFG030[MPS]. Max Read Request Size * (DPI_SLI_PRTX_CFG[MRRS]) must not exceed * PCIE*_CFG030[MRRS]. */ union cvmx_dpi_sli_prtx_cfg prt_cfg; union cvmx_sli_s2m_portx_ctl sli_s2m_portx_ctl; prt_cfg.u64 = cvmx_read_csr(CVMX_DPI_SLI_PRTX_CFG(pcie_port)); prt_cfg.s.mps = MPS_CN6XXX; prt_cfg.s.mrrs = MRRS_CN6XXX; /* Max outstanding load request. */ prt_cfg.s.molr = 32; cvmx_write_csr(CVMX_DPI_SLI_PRTX_CFG(pcie_port), prt_cfg.u64); sli_s2m_portx_ctl.u64 = cvmx_read_csr(CVMX_PEXP_SLI_S2M_PORTX_CTL(pcie_port)); sli_s2m_portx_ctl.s.mrrs = MRRS_CN6XXX; cvmx_write_csr(CVMX_PEXP_SLI_S2M_PORTX_CTL(pcie_port), sli_s2m_portx_ctl.u64); } /* ECRC Generation (PCIE*_CFG070[GE,CE]) */ pciercx_cfg070.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG070(pcie_port)); pciercx_cfg070.s.ge = 1; /* ECRC generation enable. */ pciercx_cfg070.s.ce = 1; /* ECRC check enable. */ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG070(pcie_port), pciercx_cfg070.u32); /* * Access Enables (PCIE*_CFG001[MSAE,ME]) * ME and MSAE should always be set. * Interrupt Disable (PCIE*_CFG001[I_DIS]) * System Error Message Enable (PCIE*_CFG001[SEE]) */ pciercx_cfg001.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG001(pcie_port)); pciercx_cfg001.s.msae = 1; /* Memory space enable. */ pciercx_cfg001.s.me = 1; /* Bus master enable. */ pciercx_cfg001.s.i_dis = 1; /* INTx assertion disable. */ pciercx_cfg001.s.see = 1; /* SERR# enable */ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG001(pcie_port), pciercx_cfg001.u32); /* Advanced Error Recovery Message Enables */ /* (PCIE*_CFG066,PCIE*_CFG067,PCIE*_CFG069) */ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG066(pcie_port), 0); /* Use CVMX_PCIERCX_CFG067 hardware default */ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG069(pcie_port), 0); /* Active State Power Management (PCIE*_CFG032[ASLPC]) */ pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); pciercx_cfg032.s.aslpc = 0; /* Active state Link PM control. */ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG032(pcie_port), pciercx_cfg032.u32); /* * Link Width Mode (PCIERCn_CFG452[LME]) - Set during * cvmx_pcie_rc_initialize_link() * * Primary Bus Number (PCIERCn_CFG006[PBNUM]) * * We set the primary bus number to 1 so IDT bridges are * happy. They don't like zero. */ pciercx_cfg006.u32 = 0; pciercx_cfg006.s.pbnum = 1; pciercx_cfg006.s.sbnum = 1; pciercx_cfg006.s.subbnum = 1; cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port), pciercx_cfg006.u32); /* * Memory-mapped I/O BAR (PCIERCn_CFG008) * Most applications should disable the memory-mapped I/O BAR by * setting PCIERCn_CFG008[ML_ADDR] < PCIERCn_CFG008[MB_ADDR] */ pciercx_cfg008.u32 = 0; pciercx_cfg008.s.mb_addr = 0x100; pciercx_cfg008.s.ml_addr = 0; cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG008(pcie_port), pciercx_cfg008.u32); /* * Prefetchable BAR (PCIERCn_CFG009,PCIERCn_CFG010,PCIERCn_CFG011) * Most applications should disable the prefetchable BAR by setting * PCIERCn_CFG011[UMEM_LIMIT],PCIERCn_CFG009[LMEM_LIMIT] < * PCIERCn_CFG010[UMEM_BASE],PCIERCn_CFG009[LMEM_BASE] */ pciercx_cfg009.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG009(pcie_port)); pciercx_cfg010.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG010(pcie_port)); pciercx_cfg011.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG011(pcie_port)); pciercx_cfg009.s.lmem_base = 0x100; pciercx_cfg009.s.lmem_limit = 0; pciercx_cfg010.s.umem_base = 0x100; pciercx_cfg011.s.umem_limit = 0; cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG009(pcie_port), pciercx_cfg009.u32); cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG010(pcie_port), pciercx_cfg010.u32); cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG011(pcie_port), pciercx_cfg011.u32); /* * System Error Interrupt Enables (PCIERCn_CFG035[SECEE,SEFEE,SENFEE]) * PME Interrupt Enables (PCIERCn_CFG035[PMEIE]) */ pciercx_cfg035.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG035(pcie_port)); pciercx_cfg035.s.secee = 1; /* System error on correctable error enable. */ pciercx_cfg035.s.sefee = 1; /* System error on fatal error enable. */ pciercx_cfg035.s.senfee = 1; /* System error on non-fatal error enable. */ pciercx_cfg035.s.pmeie = 1; /* PME interrupt enable. */ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG035(pcie_port), pciercx_cfg035.u32); /* * Advanced Error Recovery Interrupt Enables * (PCIERCn_CFG075[CERE,NFERE,FERE]) */ pciercx_cfg075.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG075(pcie_port)); pciercx_cfg075.s.cere = 1; /* Correctable error reporting enable. */ pciercx_cfg075.s.nfere = 1; /* Non-fatal error reporting enable. */ pciercx_cfg075.s.fere = 1; /* Fatal error reporting enable. */ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG075(pcie_port), pciercx_cfg075.u32); /* * HP Interrupt Enables (PCIERCn_CFG034[HPINT_EN], * PCIERCn_CFG034[DLLS_EN,CCINT_EN]) */ pciercx_cfg034.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG034(pcie_port)); pciercx_cfg034.s.hpint_en = 1; /* Hot-plug interrupt enable. */ pciercx_cfg034.s.dlls_en = 1; /* Data Link Layer state changed enable */ pciercx_cfg034.s.ccint_en = 1; /* Command completed interrupt enable. */ cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG034(pcie_port), pciercx_cfg034.u32); } /** * Initialize a host mode PCIe gen 1 link. This function takes a PCIe * port from reset to a link up state. Software can then begin * configuring the rest of the link. * * @pcie_port: PCIe port to initialize * * Returns Zero on success */ static int __cvmx_pcie_rc_initialize_link_gen1(int pcie_port) { uint64_t start_cycle; union cvmx_pescx_ctl_status pescx_ctl_status; union cvmx_pciercx_cfg452 pciercx_cfg452; union cvmx_pciercx_cfg032 pciercx_cfg032; union cvmx_pciercx_cfg448 pciercx_cfg448; /* Set the lane width */ pciercx_cfg452.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG452(pcie_port)); pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); if (pescx_ctl_status.s.qlm_cfg == 0) /* We're in 8 lane (56XX) or 4 lane (54XX) mode */ pciercx_cfg452.s.lme = 0xf; else /* We're in 4 lane (56XX) or 2 lane (52XX) mode */ pciercx_cfg452.s.lme = 0x7; cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG452(pcie_port), pciercx_cfg452.u32); /* * CN52XX pass 1.x has an errata where length mismatches on UR * responses can cause bus errors on 64bit memory * reads. Turning off length error checking fixes this. */ if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { union cvmx_pciercx_cfg455 pciercx_cfg455; pciercx_cfg455.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG455(pcie_port)); pciercx_cfg455.s.m_cpl_len_err = 1; cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG455(pcie_port), pciercx_cfg455.u32); } /* Lane swap needs to be manually enabled for CN52XX */ if (OCTEON_IS_MODEL(OCTEON_CN52XX) && (pcie_port == 1)) { pescx_ctl_status.s.lane_swp = 1; cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64); } /* Bring up the link */ pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port)); pescx_ctl_status.s.lnk_enb = 1; cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64); /* * CN52XX pass 1.0: Due to a bug in 2nd order CDR, it needs to * be disabled. */ if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0)) __cvmx_helper_errata_qlm_disable_2nd_order_cdr(0); /* Wait for the link to come up */ start_cycle = cvmx_get_cycle(); do { if (cvmx_get_cycle() - start_cycle > 2 * octeon_get_clock_rate()) { cvmx_dprintf("PCIe: Port %d link timeout\n", pcie_port); return -1; } __delay(10000); pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); } while (pciercx_cfg032.s.dlla == 0); /* Clear all pending errors */ cvmx_write_csr(CVMX_PEXP_NPEI_INT_SUM, cvmx_read_csr(CVMX_PEXP_NPEI_INT_SUM)); /* * Update the Replay Time Limit. Empirically, some PCIe * devices take a little longer to respond than expected under * load. As a workaround for this we configure the Replay Time * Limit to the value expected for a 512 byte MPS instead of * our actual 256 byte MPS. The numbers below are directly * from the PCIe spec table 3-4. */ pciercx_cfg448.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port)); switch (pciercx_cfg032.s.nlw) { case 1: /* 1 lane */ pciercx_cfg448.s.rtl = 1677; break; case 2: /* 2 lanes */ pciercx_cfg448.s.rtl = 867; break; case 4: /* 4 lanes */ pciercx_cfg448.s.rtl = 462; break; case 8: /* 8 lanes */ pciercx_cfg448.s.rtl = 258; break; } cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port), pciercx_cfg448.u32); return 0; } static void __cvmx_increment_ba(union cvmx_sli_mem_access_subidx *pmas) { if (OCTEON_IS_MODEL(OCTEON_CN68XX)) pmas->cn68xx.ba++; else pmas->s.ba++; } /** * Initialize a PCIe gen 1 port for use in host(RC) mode. It doesn't * enumerate the bus. * * @pcie_port: PCIe port to initialize * * Returns Zero on success */ static int __cvmx_pcie_rc_initialize_gen1(int pcie_port) { int i; int base; u64 addr_swizzle; union cvmx_ciu_soft_prst ciu_soft_prst; union cvmx_pescx_bist_status pescx_bist_status; union cvmx_pescx_bist_status2 pescx_bist_status2; union cvmx_npei_ctl_status npei_ctl_status; union cvmx_npei_mem_access_ctl npei_mem_access_ctl; union cvmx_npei_mem_access_subidx mem_access_subid; union cvmx_npei_dbg_data npei_dbg_data; union cvmx_pescx_ctl_status2 pescx_ctl_status2; union cvmx_pciercx_cfg032 pciercx_cfg032; union cvmx_npei_bar1_indexx bar1_index; retry: /* * Make sure we aren't trying to setup a target mode interface * in host mode. */ npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); if ((pcie_port == 0) && !npei_ctl_status.s.host_mode) { cvmx_dprintf("PCIe: Port %d in endpoint mode\n", pcie_port); return -1; } /* * Make sure a CN52XX isn't trying to bring up port 1 when it * is disabled. */ if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); if ((pcie_port == 1) && npei_dbg_data.cn52xx.qlm0_link_width) { cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() called on port1, but port1 is disabled\n"); return -1; } } /* * PCIe switch arbitration mode. '0' == fixed priority NPEI, * PCIe0, then PCIe1. '1' == round robin. */ npei_ctl_status.s.arb = 1; /* Allow up to 0x20 config retries */ npei_ctl_status.s.cfg_rtry = 0x20; /* * CN52XX pass1.x has an errata where P0_NTAGS and P1_NTAGS * don't reset. */ if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { npei_ctl_status.s.p0_ntags = 0x20; npei_ctl_status.s.p1_ntags = 0x20; } cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS, npei_ctl_status.u64); /* Bring the PCIe out of reset */ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) { /* * The EBH5200 board swapped the PCIe reset lines on * the board. As a workaround for this bug, we bring * both PCIe ports out of reset at the same time * instead of on separate calls. So for port 0, we * bring both out of reset and do nothing on port 1 */ if (pcie_port == 0) { ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); /* * After a chip reset the PCIe will also be in * reset. If it isn't, most likely someone is * trying to init it again without a proper * PCIe reset. */ if (ciu_soft_prst.s.soft_prst == 0) { /* Reset the ports */ ciu_soft_prst.s.soft_prst = 1; cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); ciu_soft_prst.s.soft_prst = 1; cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); /* Wait until pcie resets the ports. */ udelay(2000); } ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); ciu_soft_prst.s.soft_prst = 0; cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); ciu_soft_prst.s.soft_prst = 0; cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); } } else { /* * The normal case: The PCIe ports are completely * separate and can be brought out of reset * independently. */ if (pcie_port) ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); else ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); /* * After a chip reset the PCIe will also be in * reset. If it isn't, most likely someone is trying * to init it again without a proper PCIe reset. */ if (ciu_soft_prst.s.soft_prst == 0) { /* Reset the port */ ciu_soft_prst.s.soft_prst = 1; if (pcie_port) cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); else cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); /* Wait until pcie resets the ports. */ udelay(2000); } if (pcie_port) { ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); ciu_soft_prst.s.soft_prst = 0; cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); } else { ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); ciu_soft_prst.s.soft_prst = 0; cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); } } /* * Wait for PCIe reset to complete. Due to errata PCIE-700, we * don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a * fixed number of cycles. */ __delay(400000); /* * PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of * CN56XX and CN52XX, so we only probe it on newer chips */ if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { /* Clear PCLK_RUN so we can check if the clock is running */ pescx_ctl_status2.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); pescx_ctl_status2.s.pclk_run = 1; cvmx_write_csr(CVMX_PESCX_CTL_STATUS2(pcie_port), pescx_ctl_status2.u64); /* Now that we cleared PCLK_RUN, wait for it to be set * again telling us the clock is running */ if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CTL_STATUS2(pcie_port), union cvmx_pescx_ctl_status2, pclk_run, ==, 1, 10000)) { cvmx_dprintf("PCIe: Port %d isn't clocked, skipping.\n", pcie_port); return -1; } } /* * Check and make sure PCIe came out of reset. If it doesn't * the board probably hasn't wired the clocks up and the * interface should be skipped. */ pescx_ctl_status2.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port)); if (pescx_ctl_status2.s.pcierst) { cvmx_dprintf("PCIe: Port %d stuck in reset, skipping.\n", pcie_port); return -1; } /* * Check BIST2 status. If any bits are set skip this * interface. This is an attempt to catch PCIE-813 on pass 1 * parts. */ pescx_bist_status2.u64 = cvmx_read_csr(CVMX_PESCX_BIST_STATUS2(pcie_port)); if (pescx_bist_status2.u64) { cvmx_dprintf("PCIe: Port %d BIST2 failed. Most likely this port isn't hooked up, skipping.\n", pcie_port); return -1; } /* Check BIST status */ pescx_bist_status.u64 = cvmx_read_csr(CVMX_PESCX_BIST_STATUS(pcie_port)); if (pescx_bist_status.u64) cvmx_dprintf("PCIe: BIST FAILED for port %d (0x%016llx)\n", pcie_port, CAST64(pescx_bist_status.u64)); /* Initialize the config space CSRs */ __cvmx_pcie_rc_initialize_config_space(pcie_port); /* Bring the link up */ if (__cvmx_pcie_rc_initialize_link_gen1(pcie_port)) { cvmx_dprintf("PCIe: Failed to initialize port %d, probably the slot is empty\n", pcie_port); return -1; } /* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */ npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL); npei_mem_access_ctl.s.max_word = 0; /* Allow 16 words to combine */ npei_mem_access_ctl.s.timer = 127; /* Wait up to 127 cycles for more data */ cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64); /* Setup Mem access SubDIDs */ mem_access_subid.u64 = 0; mem_access_subid.s.port = pcie_port; /* Port the request is sent to. */ mem_access_subid.s.nmerge = 1; /* Due to an errata on pass 1 chips, no merging is allowed. */ mem_access_subid.s.esr = 1; /* Endian-swap for Reads. */ mem_access_subid.s.esw = 1; /* Endian-swap for Writes. */ mem_access_subid.s.nsr = 0; /* Enable Snooping for Reads. Octeon doesn't care, but devices might want this more conservative setting */ mem_access_subid.s.nsw = 0; /* Enable Snoop for Writes. */ mem_access_subid.s.ror = 0; /* Disable Relaxed Ordering for Reads. */ mem_access_subid.s.row = 0; /* Disable Relaxed Ordering for Writes. */ mem_access_subid.s.ba = 0; /* PCIe Adddress Bits <63:34>. */ /* * Setup mem access 12-15 for port 0, 16-19 for port 1, * supplying 36 bits of address space. */ for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) { cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(i), mem_access_subid.u64); mem_access_subid.s.ba += 1; /* Set each SUBID to extend the addressable range */ } /* * Disable the peer to peer forwarding register. This must be * setup by the OS after it enumerates the bus and assigns * addresses to the PCIe busses. */ for (i = 0; i < 4; i++) { cvmx_write_csr(CVMX_PESCX_P2P_BARX_START(i, pcie_port), -1); cvmx_write_csr(CVMX_PESCX_P2P_BARX_END(i, pcie_port), -1); } /* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */ cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0); /* BAR1 follows BAR2 with a gap so it has the same address as for gen2. */ cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), CVMX_PCIE_BAR1_RC_BASE); bar1_index.u32 = 0; bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22); bar1_index.s.ca = 1; /* Not Cached */ bar1_index.s.end_swp = 1; /* Endian Swap mode */ bar1_index.s.addr_v = 1; /* Valid entry */ base = pcie_port ? 16 : 0; /* Big endian swizzle for 32-bit PEXP_NCB register. */ #ifdef __MIPSEB__ addr_swizzle = 4; #else addr_swizzle = 0; #endif for (i = 0; i < 16; i++) { cvmx_write64_uint32((CVMX_PEXP_NPEI_BAR1_INDEXX(base) ^ addr_swizzle), bar1_index.u32); base++; /* 256MB / 16 >> 22 == 4 */ bar1_index.s.addr_idx += (((1ull << 28) / 16ull) >> 22); } /* * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take * precedence where they overlap. It also overlaps with the * device addresses, so make sure the peer to peer forwarding * is set right. */ cvmx_write_csr(CVMX_PESCX_P2N_BAR2_START(pcie_port), 0); /* * Setup BAR2 attributes * * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM]) * - PTLP_RO,CTLP_RO should normally be set (except for debug). * - WAIT_COM=0 will likely work for all applications. * * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]). */ if (pcie_port) { union cvmx_npei_ctl_port1 npei_ctl_port; npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT1); npei_ctl_port.s.bar2_enb = 1; npei_ctl_port.s.bar2_esx = 1; npei_ctl_port.s.bar2_cax = 0; npei_ctl_port.s.ptlp_ro = 1; npei_ctl_port.s.ctlp_ro = 1; npei_ctl_port.s.wait_com = 0; npei_ctl_port.s.waitl_com = 0; cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT1, npei_ctl_port.u64); } else { union cvmx_npei_ctl_port0 npei_ctl_port; npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT0); npei_ctl_port.s.bar2_enb = 1; npei_ctl_port.s.bar2_esx = 1; npei_ctl_port.s.bar2_cax = 0; npei_ctl_port.s.ptlp_ro = 1; npei_ctl_port.s.ctlp_ro = 1; npei_ctl_port.s.wait_com = 0; npei_ctl_port.s.waitl_com = 0; cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT0, npei_ctl_port.u64); } /* * Both pass 1 and pass 2 of CN52XX and CN56XX have an errata * that causes TLP ordering to not be preserved after multiple * PCIe port resets. This code detects this fault and corrects * it by aligning the TLP counters properly. Another link * reset is then performed. See PCIE-13340 */ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X) || OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { union cvmx_npei_dbg_data dbg_data; int old_in_fif_p_count; int in_fif_p_count; int out_p_count; int in_p_offset = (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) ? 4 : 1; int i; /* * Choose a write address of 1MB. It should be * harmless as all bars haven't been setup. */ uint64_t write_address = (cvmx_pcie_get_mem_base_address(pcie_port) + 0x100000) | (1ull<<63); /* * Make sure at least in_p_offset have been executed before we try and * read in_fif_p_count */ i = in_p_offset; while (i--) { cvmx_write64_uint32(write_address, 0); __delay(10000); } /* * Read the IN_FIF_P_COUNT from the debug * select. IN_FIF_P_COUNT can be unstable sometimes so * read it twice with a write between the reads. This * way we can tell the value is good as it will * increment by one due to the write */ cvmx_write_csr(CVMX_PEXP_NPEI_DBG_SELECT, (pcie_port) ? 0xd7fc : 0xcffc); cvmx_read_csr(CVMX_PEXP_NPEI_DBG_SELECT); do { dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); old_in_fif_p_count = dbg_data.s.data & 0xff; cvmx_write64_uint32(write_address, 0); __delay(10000); dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); in_fif_p_count = dbg_data.s.data & 0xff; } while (in_fif_p_count != ((old_in_fif_p_count+1) & 0xff)); /* Update in_fif_p_count for it's offset with respect to out_p_count */ in_fif_p_count = (in_fif_p_count + in_p_offset) & 0xff; /* Read the OUT_P_COUNT from the debug select */ cvmx_write_csr(CVMX_PEXP_NPEI_DBG_SELECT, (pcie_port) ? 0xd00f : 0xc80f); cvmx_read_csr(CVMX_PEXP_NPEI_DBG_SELECT); dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); out_p_count = (dbg_data.s.data>>1) & 0xff; /* Check that the two counters are aligned */ if (out_p_count != in_fif_p_count) { cvmx_dprintf("PCIe: Port %d aligning TLP counters as workaround to maintain ordering\n", pcie_port); while (in_fif_p_count != 0) { cvmx_write64_uint32(write_address, 0); __delay(10000); in_fif_p_count = (in_fif_p_count + 1) & 0xff; } /* * The EBH5200 board swapped the PCIe reset * lines on the board. This means we must * bring both links down and up, which will * cause the PCIe0 to need alignment * again. Lots of messages will be displayed, * but everything should work */ if ((cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) && (pcie_port == 1)) cvmx_pcie_rc_initialize(0); /* Rety bringing this port up */ goto retry; } } /* Display the link status */ pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); cvmx_dprintf("PCIe: Port %d link active, %d lanes\n", pcie_port, pciercx_cfg032.s.nlw); return 0; } /** * Initialize a host mode PCIe gen 2 link. This function takes a PCIe * port from reset to a link up state. Software can then begin * configuring the rest of the link. * * @pcie_port: PCIe port to initialize * * Return Zero on success. */ static int __cvmx_pcie_rc_initialize_link_gen2(int pcie_port) { uint64_t start_cycle; union cvmx_pemx_ctl_status pem_ctl_status; union cvmx_pciercx_cfg032 pciercx_cfg032; union cvmx_pciercx_cfg448 pciercx_cfg448; /* Bring up the link */ pem_ctl_status.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(pcie_port)); pem_ctl_status.s.lnk_enb = 1; cvmx_write_csr(CVMX_PEMX_CTL_STATUS(pcie_port), pem_ctl_status.u64); /* Wait for the link to come up */ start_cycle = cvmx_get_cycle(); do { if (cvmx_get_cycle() - start_cycle > octeon_get_clock_rate()) return -1; __delay(10000); pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); } while ((pciercx_cfg032.s.dlla == 0) || (pciercx_cfg032.s.lt == 1)); /* * Update the Replay Time Limit. Empirically, some PCIe * devices take a little longer to respond than expected under * load. As a workaround for this we configure the Replay Time * Limit to the value expected for a 512 byte MPS instead of * our actual 256 byte MPS. The numbers below are directly * from the PCIe spec table 3-4 */ pciercx_cfg448.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port)); switch (pciercx_cfg032.s.nlw) { case 1: /* 1 lane */ pciercx_cfg448.s.rtl = 1677; break; case 2: /* 2 lanes */ pciercx_cfg448.s.rtl = 867; break; case 4: /* 4 lanes */ pciercx_cfg448.s.rtl = 462; break; case 8: /* 8 lanes */ pciercx_cfg448.s.rtl = 258; break; } cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port), pciercx_cfg448.u32); return 0; } /** * Initialize a PCIe gen 2 port for use in host(RC) mode. It doesn't enumerate * the bus. * * @pcie_port: PCIe port to initialize * * Returns Zero on success. */ static int __cvmx_pcie_rc_initialize_gen2(int pcie_port) { int i; union cvmx_ciu_soft_prst ciu_soft_prst; union cvmx_mio_rst_ctlx mio_rst_ctl; union cvmx_pemx_bar_ctl pemx_bar_ctl; union cvmx_pemx_ctl_status pemx_ctl_status; union cvmx_pemx_bist_status pemx_bist_status; union cvmx_pemx_bist_status2 pemx_bist_status2; union cvmx_pciercx_cfg032 pciercx_cfg032; union cvmx_pciercx_cfg515 pciercx_cfg515; union cvmx_sli_ctl_portx sli_ctl_portx; union cvmx_sli_mem_access_ctl sli_mem_access_ctl; union cvmx_sli_mem_access_subidx mem_access_subid; union cvmx_sriox_status_reg sriox_status_reg; union cvmx_pemx_bar1_indexx bar1_index; if (octeon_has_feature(OCTEON_FEATURE_SRIO)) { /* Make sure this interface isn't SRIO */ if (OCTEON_IS_MODEL(OCTEON_CN66XX)) { /* * The CN66XX requires reading the * MIO_QLMX_CFG register to figure out the * port type. */ union cvmx_mio_qlmx_cfg qlmx_cfg; qlmx_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(pcie_port)); if (qlmx_cfg.s.qlm_spd == 15) { pr_notice("PCIe: Port %d is disabled, skipping.\n", pcie_port); return -1; } switch (qlmx_cfg.s.qlm_spd) { case 0x1: /* SRIO 1x4 short */ case 0x3: /* SRIO 1x4 long */ case 0x4: /* SRIO 2x2 short */ case 0x6: /* SRIO 2x2 long */ pr_notice("PCIe: Port %d is SRIO, skipping.\n", pcie_port); return -1; case 0x9: /* SGMII */ pr_notice("PCIe: Port %d is SGMII, skipping.\n", pcie_port); return -1; case 0xb: /* XAUI */ pr_notice("PCIe: Port %d is XAUI, skipping.\n", pcie_port); return -1; case 0x0: /* PCIE gen2 */ case 0x8: /* PCIE gen2 (alias) */ case 0x2: /* PCIE gen1 */ case 0xa: /* PCIE gen1 (alias) */ break; default: pr_notice("PCIe: Port %d is unknown, skipping.\n", pcie_port); return -1; } } else { sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(pcie_port)); if (sriox_status_reg.s.srio) { pr_notice("PCIe: Port %d is SRIO, skipping.\n", pcie_port); return -1; } } } #if 0 /* This code is so that the PCIe analyzer is able to see 63XX traffic */ pr_notice("PCIE : init for pcie analyzer.\n"); cvmx_helper_qlm_jtag_init(); cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 85); cvmx_helper_qlm_jtag_shift(pcie_port, 1, 1); cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 300-86); cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 85); cvmx_helper_qlm_jtag_shift(pcie_port, 1, 1); cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 300-86); cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 85); cvmx_helper_qlm_jtag_shift(pcie_port, 1, 1); cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 300-86); cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 85); cvmx_helper_qlm_jtag_shift(pcie_port, 1, 1); cvmx_helper_qlm_jtag_shift_zeros(pcie_port, 300-86); cvmx_helper_qlm_jtag_update(pcie_port); #endif /* Make sure we aren't trying to setup a target mode interface in host mode */ mio_rst_ctl.u64 = cvmx_read_csr(CVMX_MIO_RST_CTLX(pcie_port)); if (!mio_rst_ctl.s.host_mode) { pr_notice("PCIe: Port %d in endpoint mode.\n", pcie_port); return -1; } /* CN63XX Pass 1.0 errata G-14395 requires the QLM De-emphasis be programmed */ if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_0)) { if (pcie_port) { union cvmx_ciu_qlm ciu_qlm; ciu_qlm.u64 = cvmx_read_csr(CVMX_CIU_QLM1); ciu_qlm.s.txbypass = 1; ciu_qlm.s.txdeemph = 5; ciu_qlm.s.txmargin = 0x17; cvmx_write_csr(CVMX_CIU_QLM1, ciu_qlm.u64); } else { union cvmx_ciu_qlm ciu_qlm; ciu_qlm.u64 = cvmx_read_csr(CVMX_CIU_QLM0); ciu_qlm.s.txbypass = 1; ciu_qlm.s.txdeemph = 5; ciu_qlm.s.txmargin = 0x17; cvmx_write_csr(CVMX_CIU_QLM0, ciu_qlm.u64); } } /* Bring the PCIe out of reset */ if (pcie_port) ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); else ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); /* * After a chip reset the PCIe will also be in reset. If it * isn't, most likely someone is trying to init it again * without a proper PCIe reset */ if (ciu_soft_prst.s.soft_prst == 0) { /* Reset the port */ ciu_soft_prst.s.soft_prst = 1; if (pcie_port) cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); else cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); /* Wait until pcie resets the ports. */ udelay(2000); } if (pcie_port) { ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1); ciu_soft_prst.s.soft_prst = 0; cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64); } else { ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST); ciu_soft_prst.s.soft_prst = 0; cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64); } /* Wait for PCIe reset to complete */ udelay(1000); /* * Check and make sure PCIe came out of reset. If it doesn't * the board probably hasn't wired the clocks up and the * interface should be skipped. */ if (CVMX_WAIT_FOR_FIELD64(CVMX_MIO_RST_CTLX(pcie_port), union cvmx_mio_rst_ctlx, rst_done, ==, 1, 10000)) { pr_notice("PCIe: Port %d stuck in reset, skipping.\n", pcie_port); return -1; } /* Check BIST status */ pemx_bist_status.u64 = cvmx_read_csr(CVMX_PEMX_BIST_STATUS(pcie_port)); if (pemx_bist_status.u64) pr_notice("PCIe: BIST FAILED for port %d (0x%016llx)\n", pcie_port, CAST64(pemx_bist_status.u64)); pemx_bist_status2.u64 = cvmx_read_csr(CVMX_PEMX_BIST_STATUS2(pcie_port)); /* Errata PCIE-14766 may cause the lower 6 bits to be randomly set on CN63XXp1 */ if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X)) pemx_bist_status2.u64 &= ~0x3full; if (pemx_bist_status2.u64) pr_notice("PCIe: BIST2 FAILED for port %d (0x%016llx)\n", pcie_port, CAST64(pemx_bist_status2.u64)); /* Initialize the config space CSRs */ __cvmx_pcie_rc_initialize_config_space(pcie_port); /* Enable gen2 speed selection */ pciercx_cfg515.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG515(pcie_port)); pciercx_cfg515.s.dsc = 1; cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG515(pcie_port), pciercx_cfg515.u32); /* Bring the link up */ if (__cvmx_pcie_rc_initialize_link_gen2(pcie_port)) { /* * Some gen1 devices don't handle the gen 2 training * correctly. Disable gen2 and try again with only * gen1 */ union cvmx_pciercx_cfg031 pciercx_cfg031; pciercx_cfg031.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG031(pcie_port)); pciercx_cfg031.s.mls = 1; cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG031(pcie_port), pciercx_cfg031.u32); if (__cvmx_pcie_rc_initialize_link_gen2(pcie_port)) { pr_notice("PCIe: Link timeout on port %d, probably the slot is empty\n", pcie_port); return -1; } } /* Store merge control (SLI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */ sli_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_SLI_MEM_ACCESS_CTL); sli_mem_access_ctl.s.max_word = 0; /* Allow 16 words to combine */ sli_mem_access_ctl.s.timer = 127; /* Wait up to 127 cycles for more data */ cvmx_write_csr(CVMX_PEXP_SLI_MEM_ACCESS_CTL, sli_mem_access_ctl.u64); /* Setup Mem access SubDIDs */ mem_access_subid.u64 = 0; mem_access_subid.s.port = pcie_port; /* Port the request is sent to. */ mem_access_subid.s.nmerge = 0; /* Allow merging as it works on CN6XXX. */ mem_access_subid.s.esr = 1; /* Endian-swap for Reads. */ mem_access_subid.s.esw = 1; /* Endian-swap for Writes. */ mem_access_subid.s.wtype = 0; /* "No snoop" and "Relaxed ordering" are not set */ mem_access_subid.s.rtype = 0; /* "No snoop" and "Relaxed ordering" are not set */ /* PCIe Adddress Bits <63:34>. */ if (OCTEON_IS_MODEL(OCTEON_CN68XX)) mem_access_subid.cn68xx.ba = 0; else mem_access_subid.s.ba = 0; /* * Setup mem access 12-15 for port 0, 16-19 for port 1, * supplying 36 bits of address space. */ for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) { cvmx_write_csr(CVMX_PEXP_SLI_MEM_ACCESS_SUBIDX(i), mem_access_subid.u64); /* Set each SUBID to extend the addressable range */ __cvmx_increment_ba(&mem_access_subid); } /* * Disable the peer to peer forwarding register. This must be * setup by the OS after it enumerates the bus and assigns * addresses to the PCIe busses. */ for (i = 0; i < 4; i++) { cvmx_write_csr(CVMX_PEMX_P2P_BARX_START(i, pcie_port), -1); cvmx_write_csr(CVMX_PEMX_P2P_BARX_END(i, pcie_port), -1); } /* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */ cvmx_write_csr(CVMX_PEMX_P2N_BAR0_START(pcie_port), 0); /* * Set Octeon's BAR2 to decode 0-2^41. Bar0 and Bar1 take * precedence where they overlap. It also overlaps with the * device addresses, so make sure the peer to peer forwarding * is set right. */ cvmx_write_csr(CVMX_PEMX_P2N_BAR2_START(pcie_port), 0); /* * Setup BAR2 attributes * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM]) * - PTLP_RO,CTLP_RO should normally be set (except for debug). * - WAIT_COM=0 will likely work for all applications. * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]) */ pemx_bar_ctl.u64 = cvmx_read_csr(CVMX_PEMX_BAR_CTL(pcie_port)); pemx_bar_ctl.s.bar1_siz = 3; /* 256MB BAR1*/ pemx_bar_ctl.s.bar2_enb = 1; pemx_bar_ctl.s.bar2_esx = 1; pemx_bar_ctl.s.bar2_cax = 0; cvmx_write_csr(CVMX_PEMX_BAR_CTL(pcie_port), pemx_bar_ctl.u64); sli_ctl_portx.u64 = cvmx_read_csr(CVMX_PEXP_SLI_CTL_PORTX(pcie_port)); sli_ctl_portx.s.ptlp_ro = 1; sli_ctl_portx.s.ctlp_ro = 1; sli_ctl_portx.s.wait_com = 0; sli_ctl_portx.s.waitl_com = 0; cvmx_write_csr(CVMX_PEXP_SLI_CTL_PORTX(pcie_port), sli_ctl_portx.u64); /* BAR1 follows BAR2 */ cvmx_write_csr(CVMX_PEMX_P2N_BAR1_START(pcie_port), CVMX_PCIE_BAR1_RC_BASE); bar1_index.u64 = 0; bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22); bar1_index.s.ca = 1; /* Not Cached */ bar1_index.s.end_swp = 1; /* Endian Swap mode */ bar1_index.s.addr_v = 1; /* Valid entry */ for (i = 0; i < 16; i++) { cvmx_write_csr(CVMX_PEMX_BAR1_INDEXX(i, pcie_port), bar1_index.u64); /* 256MB / 16 >> 22 == 4 */ bar1_index.s.addr_idx += (((1ull << 28) / 16ull) >> 22); } /* * Allow config retries for 250ms. Count is based off the 5Ghz * SERDES clock. */ pemx_ctl_status.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(pcie_port)); pemx_ctl_status.s.cfg_rtry = 250 * 5000000 / 0x10000; cvmx_write_csr(CVMX_PEMX_CTL_STATUS(pcie_port), pemx_ctl_status.u64); /* Display the link status */ pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port)); pr_notice("PCIe: Port %d link active, %d lanes, speed gen%d\n", pcie_port, pciercx_cfg032.s.nlw, pciercx_cfg032.s.ls); return 0; } /** * Initialize a PCIe port for use in host(RC) mode. It doesn't enumerate the bus. * * @pcie_port: PCIe port to initialize * * Returns Zero on success */ static int cvmx_pcie_rc_initialize(int pcie_port) { int result; if (octeon_has_feature(OCTEON_FEATURE_NPEI)) result = __cvmx_pcie_rc_initialize_gen1(pcie_port); else result = __cvmx_pcie_rc_initialize_gen2(pcie_port); return result; } /* Above was cvmx-pcie.c, below original pcie.c */ /** * Map a PCI device to the appropriate interrupt line * * @dev: The Linux PCI device structure for the device to map * @slot: The slot number for this device on __BUS 0__. Linux * enumerates through all the bridges and figures out the * slot on Bus 0 where this device eventually hooks to. * @pin: The PCI interrupt pin read from the device, then swizzled * as it goes through each bridge. * Returns Interrupt number for the device */ int octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { /* * The EBH5600 board with the PCI to PCIe bridge mistakenly * wires the first slot for both device id 2 and interrupt * A. According to the PCI spec, device id 2 should be C. The * following kludge attempts to fix this. */ if (strstr(octeon_board_type_string(), "EBH5600") && dev->bus && dev->bus->parent) { /* * Iterate all the way up the device chain and find * the root bus. */ while (dev->bus && dev->bus->parent) dev = to_pci_dev(dev->bus->bridge); /* * If the root bus is number 0 and the PEX 8114 is the * root, assume we are behind the miswired bus. We * need to correct the swizzle level by two. Yuck. */ if ((dev->bus->number == 1) && (dev->vendor == 0x10b5) && (dev->device == 0x8114)) { /* * The pin field is one based, not zero. We * need to swizzle it by minus two. */ pin = ((pin - 3) & 3) + 1; } } /* * The -1 is because pin starts with one, not zero. It might * be that this equation needs to include the slot number, but * I don't have hardware to check that against. */ return pin - 1 + OCTEON_IRQ_PCI_INT0; } static void set_cfg_read_retry(u32 retry_cnt) { union cvmx_pemx_ctl_status pemx_ctl; pemx_ctl.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(1)); pemx_ctl.s.cfg_rtry = retry_cnt; cvmx_write_csr(CVMX_PEMX_CTL_STATUS(1), pemx_ctl.u64); } static u32 disable_cfg_read_retry(void) { u32 retry_cnt; union cvmx_pemx_ctl_status pemx_ctl; pemx_ctl.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(1)); retry_cnt = pemx_ctl.s.cfg_rtry; pemx_ctl.s.cfg_rtry = 0; cvmx_write_csr(CVMX_PEMX_CTL_STATUS(1), pemx_ctl.u64); return retry_cnt; } static int is_cfg_retry(void) { union cvmx_pemx_int_sum pemx_int_sum; pemx_int_sum.u64 = cvmx_read_csr(CVMX_PEMX_INT_SUM(1)); if (pemx_int_sum.s.crs_dr) return 1; return 0; } /* * Read a value from configuration space * */ static int octeon_pcie_read_config(unsigned int pcie_port, struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 *val) { union octeon_cvmemctl cvmmemctl; union octeon_cvmemctl cvmmemctl_save; int bus_number = bus->number; int cfg_retry = 0; int retry_cnt = 0; int max_retry_cnt = 10; u32 cfg_retry_cnt = 0; cvmmemctl_save.u64 = 0; BUG_ON(pcie_port >= ARRAY_SIZE(enable_pcie_bus_num_war)); /* * For the top level bus make sure our hardware bus number * matches the software one */ if (bus->parent == NULL) { if (enable_pcie_bus_num_war[pcie_port]) bus_number = 0; else { union cvmx_pciercx_cfg006 pciercx_cfg006; pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port)); if (pciercx_cfg006.s.pbnum != bus_number) { pciercx_cfg006.s.pbnum = bus_number; pciercx_cfg006.s.sbnum = bus_number; pciercx_cfg006.s.subbnum = bus_number; cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port), pciercx_cfg006.u32); } } } /* * PCIe only has a single device connected to Octeon. It is * always device ID 0. Don't bother doing reads for other * device IDs on the first segment. */ if ((bus->parent == NULL) && (devfn >> 3 != 0)) return PCIBIOS_FUNC_NOT_SUPPORTED; /* * The following is a workaround for the CN57XX, CN56XX, * CN55XX, and CN54XX errata with PCIe config reads from non * existent devices. These chips will hang the PCIe link if a * config read is performed that causes a UR response. */ if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) { /* * For our EBH5600 board, port 0 has a bridge with two * PCI-X slots. We need a new special checks to make * sure we only probe valid stuff. The PCIe->PCI-X * bridge only respondes to device ID 0, function * 0-1 */ if ((bus->parent == NULL) && (devfn >= 2)) return PCIBIOS_FUNC_NOT_SUPPORTED; /* * The PCI-X slots are device ID 2,3. Choose one of * the below "if" blocks based on what is plugged into * the board. */ #if 1 /* Use this option if you aren't using either slot */ if (bus_number == 2) return PCIBIOS_FUNC_NOT_SUPPORTED; #elif 0 /* * Use this option if you are using the first slot but * not the second. */ if ((bus_number == 2) && (devfn >> 3 != 2)) return PCIBIOS_FUNC_NOT_SUPPORTED; #elif 0 /* * Use this option if you are using the second slot * but not the first. */ if ((bus_number == 2) && (devfn >> 3 != 3)) return PCIBIOS_FUNC_NOT_SUPPORTED; #elif 0 /* Use this opion if you are using both slots */ if ((bus_number == 2) && !((devfn == (2 << 3)) || (devfn == (3 << 3)))) return PCIBIOS_FUNC_NOT_SUPPORTED; #endif /* The following #if gives a more complicated example. This is the required checks for running a Nitrox CN16XX-NHBX in the slot of the EBH5600. This card has a PLX PCIe bridge with four Nitrox PLX parts behind it */ #if 0 /* PLX bridge with 4 ports */ if ((bus_number == 4) && !((devfn >> 3 >= 1) && (devfn >> 3 <= 4))) return PCIBIOS_FUNC_NOT_SUPPORTED; /* Nitrox behind PLX 1 */ if ((bus_number == 5) && (devfn >> 3 != 0)) return PCIBIOS_FUNC_NOT_SUPPORTED; /* Nitrox behind PLX 2 */ if ((bus_number == 6) && (devfn >> 3 != 0)) return PCIBIOS_FUNC_NOT_SUPPORTED; /* Nitrox behind PLX 3 */ if ((bus_number == 7) && (devfn >> 3 != 0)) return PCIBIOS_FUNC_NOT_SUPPORTED; /* Nitrox behind PLX 4 */ if ((bus_number == 8) && (devfn >> 3 != 0)) return PCIBIOS_FUNC_NOT_SUPPORTED; #endif /* * Shorten the DID timeout so bus errors for PCIe * config reads from non existent devices happen * faster. This allows us to continue booting even if * the above "if" checks are wrong. Once one of these * errors happens, the PCIe port is dead. */ cvmmemctl_save.u64 = __read_64bit_c0_register($11, 7); cvmmemctl.u64 = cvmmemctl_save.u64; cvmmemctl.s.didtto = 2; __write_64bit_c0_register($11, 7, cvmmemctl.u64); } if ((OCTEON_IS_MODEL(OCTEON_CN63XX)) && (enable_pcie_14459_war)) cfg_retry_cnt = disable_cfg_read_retry(); pr_debug("pcie_cfg_rd port=%d b=%d devfn=0x%03x reg=0x%03x" " size=%d ", pcie_port, bus_number, devfn, reg, size); do { switch (size) { case 4: *val = cvmx_pcie_config_read32(pcie_port, bus_number, devfn >> 3, devfn & 0x7, reg); break; case 2: *val = cvmx_pcie_config_read16(pcie_port, bus_number, devfn >> 3, devfn & 0x7, reg); break; case 1: *val = cvmx_pcie_config_read8(pcie_port, bus_number, devfn >> 3, devfn & 0x7, reg); break; default: if (OCTEON_IS_MODEL(OCTEON_CN63XX)) set_cfg_read_retry(cfg_retry_cnt); return PCIBIOS_FUNC_NOT_SUPPORTED; } if ((OCTEON_IS_MODEL(OCTEON_CN63XX)) && (enable_pcie_14459_war)) { cfg_retry = is_cfg_retry(); retry_cnt++; if (retry_cnt > max_retry_cnt) { pr_err(" pcie cfg_read retries failed. retry_cnt=%d\n", retry_cnt); cfg_retry = 0; } } } while (cfg_retry); if ((OCTEON_IS_MODEL(OCTEON_CN63XX)) && (enable_pcie_14459_war)) set_cfg_read_retry(cfg_retry_cnt); pr_debug("val=%08x : tries=%02d\n", *val, retry_cnt); if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) || OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) write_c0_cvmmemctl(cvmmemctl_save.u64); return PCIBIOS_SUCCESSFUL; } static int octeon_pcie0_read_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 *val) { return octeon_pcie_read_config(0, bus, devfn, reg, size, val); } static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 *val) { return octeon_pcie_read_config(1, bus, devfn, reg, size, val); } static int octeon_dummy_read_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 *val) { return PCIBIOS_FUNC_NOT_SUPPORTED; } /* * Write a value to PCI configuration space */ static int octeon_pcie_write_config(unsigned int pcie_port, struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 val) { int bus_number = bus->number; BUG_ON(pcie_port >= ARRAY_SIZE(enable_pcie_bus_num_war)); if ((bus->parent == NULL) && (enable_pcie_bus_num_war[pcie_port])) bus_number = 0; pr_debug("pcie_cfg_wr port=%d b=%d devfn=0x%03x" " reg=0x%03x size=%d val=%08x\n", pcie_port, bus_number, devfn, reg, size, val); switch (size) { case 4: cvmx_pcie_config_write32(pcie_port, bus_number, devfn >> 3, devfn & 0x7, reg, val); break; case 2: cvmx_pcie_config_write16(pcie_port, bus_number, devfn >> 3, devfn & 0x7, reg, val); break; case 1: cvmx_pcie_config_write8(pcie_port, bus_number, devfn >> 3, devfn & 0x7, reg, val); break; default: return PCIBIOS_FUNC_NOT_SUPPORTED; } return PCIBIOS_SUCCESSFUL; } static int octeon_pcie0_write_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 val) { return octeon_pcie_write_config(0, bus, devfn, reg, size, val); } static int octeon_pcie1_write_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 val) { return octeon_pcie_write_config(1, bus, devfn, reg, size, val); } static int octeon_dummy_write_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 val) { return PCIBIOS_FUNC_NOT_SUPPORTED; } static struct pci_ops octeon_pcie0_ops = { .read = octeon_pcie0_read_config, .write = octeon_pcie0_write_config, }; static struct resource octeon_pcie0_mem_resource = { .name = "Octeon PCIe0 MEM", .flags = IORESOURCE_MEM, }; static struct resource octeon_pcie0_io_resource = { .name = "Octeon PCIe0 IO", .flags = IORESOURCE_IO, }; static struct pci_controller octeon_pcie0_controller = { .pci_ops = &octeon_pcie0_ops, .mem_resource = &octeon_pcie0_mem_resource, .io_resource = &octeon_pcie0_io_resource, }; static struct pci_ops octeon_pcie1_ops = { .read = octeon_pcie1_read_config, .write = octeon_pcie1_write_config, }; static struct resource octeon_pcie1_mem_resource = { .name = "Octeon PCIe1 MEM", .flags = IORESOURCE_MEM, }; static struct resource octeon_pcie1_io_resource = { .name = "Octeon PCIe1 IO", .flags = IORESOURCE_IO, }; static struct pci_controller octeon_pcie1_controller = { .pci_ops = &octeon_pcie1_ops, .mem_resource = &octeon_pcie1_mem_resource, .io_resource = &octeon_pcie1_io_resource, }; static struct pci_ops octeon_dummy_ops = { .read = octeon_dummy_read_config, .write = octeon_dummy_write_config, }; static struct resource octeon_dummy_mem_resource = { .name = "Virtual PCIe MEM", .flags = IORESOURCE_MEM, }; static struct resource octeon_dummy_io_resource = { .name = "Virtual PCIe IO", .flags = IORESOURCE_IO, }; static struct pci_controller octeon_dummy_controller = { .pci_ops = &octeon_dummy_ops, .mem_resource = &octeon_dummy_mem_resource, .io_resource = &octeon_dummy_io_resource, }; static int device_needs_bus_num_war(uint32_t deviceid) { #define IDT_VENDOR_ID 0x111d if ((deviceid & 0xffff) == IDT_VENDOR_ID) return 1; return 0; } /** * Initialize the Octeon PCIe controllers * * Returns */ static int __init octeon_pcie_setup(void) { int result; int host_mode; int srio_war15205 = 0, port; union cvmx_sli_ctl_portx sli_ctl_portx; union cvmx_sriox_status_reg sriox_status_reg; /* These chips don't have PCIe */ if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) return 0; /* No PCIe simulation */ if (octeon_is_simulation()) return 0; /* Disable PCI if instructed on the command line */ if (pcie_disable) return 0; /* Point pcibios_map_irq() to the PCIe version of it */ octeon_pcibios_map_irq = octeon_pcie_pcibios_map_irq; /* * PCIe I/O range. It is based on port 0 but includes up until * port 1's end. */ set_io_port_base(CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0))); ioport_resource.start = 0; ioport_resource.end = cvmx_pcie_get_io_base_address(1) - cvmx_pcie_get_io_base_address(0) + cvmx_pcie_get_io_size(1) - 1; /* * Create a dummy PCIe controller to swallow up bus 0. IDT bridges * don't work if the primary bus number is zero. Here we add a fake * PCIe controller that the kernel will give bus 0. This allows * us to not change the normal kernel bus enumeration */ octeon_dummy_controller.io_map_base = -1; octeon_dummy_controller.mem_resource->start = (1ull<<48); octeon_dummy_controller.mem_resource->end = (1ull<<48); register_pci_controller(&octeon_dummy_controller); if (octeon_has_feature(OCTEON_FEATURE_NPEI)) { union cvmx_npei_ctl_status npei_ctl_status; npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS); host_mode = npei_ctl_status.s.host_mode; octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE; } else { union cvmx_mio_rst_ctlx mio_rst_ctl; mio_rst_ctl.u64 = cvmx_read_csr(CVMX_MIO_RST_CTLX(0)); host_mode = mio_rst_ctl.s.host_mode; octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE2; } if (host_mode) { pr_notice("PCIe: Initializing port 0\n"); /* CN63XX pass 1_x/2.0 errata PCIe-15205 */ if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) { sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(0)); if (sriox_status_reg.s.srio) { srio_war15205 += 1; /* Port is SRIO */ port = 0; } } result = cvmx_pcie_rc_initialize(0); if (result == 0) { uint32_t device0; /* Memory offsets are physical addresses */ octeon_pcie0_controller.mem_offset = cvmx_pcie_get_mem_base_address(0); /* IO offsets are Mips virtual addresses */ octeon_pcie0_controller.io_map_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address (0)); octeon_pcie0_controller.io_offset = 0; /* * To keep things similar to PCI, we start * device addresses at the same place as PCI * uisng big bar support. This normally * translates to 4GB-256MB, which is the same * as most x86 PCs. */ octeon_pcie0_controller.mem_resource->start = cvmx_pcie_get_mem_base_address(0) + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20); octeon_pcie0_controller.mem_resource->end = cvmx_pcie_get_mem_base_address(0) + cvmx_pcie_get_mem_size(0) - 1; /* * Ports must be above 16KB for the ISA bus * filtering in the PCI-X to PCI bridge. */ octeon_pcie0_controller.io_resource->start = 4 << 10; octeon_pcie0_controller.io_resource->end = cvmx_pcie_get_io_size(0) - 1; msleep(100); /* Some devices need extra time */ register_pci_controller(&octeon_pcie0_controller); device0 = cvmx_pcie_config_read32(0, 0, 0, 0, 0); enable_pcie_bus_num_war[0] = device_needs_bus_num_war(device0); } } else { pr_notice("PCIe: Port 0 in endpoint mode, skipping.\n"); /* CN63XX pass 1_x/2.0 errata PCIe-15205 */ if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) { srio_war15205 += 1; port = 0; } } if (octeon_has_feature(OCTEON_FEATURE_NPEI)) { host_mode = 1; /* Skip the 2nd port on CN52XX if port 0 is in 4 lane mode */ if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { union cvmx_npei_dbg_data dbg_data; dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA); if (dbg_data.cn52xx.qlm0_link_width) host_mode = 0; } } else { union cvmx_mio_rst_ctlx mio_rst_ctl; mio_rst_ctl.u64 = cvmx_read_csr(CVMX_MIO_RST_CTLX(1)); host_mode = mio_rst_ctl.s.host_mode; } if (host_mode) { pr_notice("PCIe: Initializing port 1\n"); /* CN63XX pass 1_x/2.0 errata PCIe-15205 */ if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) { sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(1)); if (sriox_status_reg.s.srio) { srio_war15205 += 1; /* Port is SRIO */ port = 1; } } result = cvmx_pcie_rc_initialize(1); if (result == 0) { uint32_t device0; /* Memory offsets are physical addresses */ octeon_pcie1_controller.mem_offset = cvmx_pcie_get_mem_base_address(1); /* * To calculate the address for accessing the 2nd PCIe device, * either 'io_map_base' (pci_iomap()), or 'mips_io_port_base' * (ioport_map()) value is added to * pci_resource_start(dev,bar)). The 'mips_io_port_base' is set * only once based on first PCIe. Also changing 'io_map_base' * based on first slot's value so that both the routines will * work properly. */ octeon_pcie1_controller.io_map_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0)); /* IO offsets are Mips virtual addresses */ octeon_pcie1_controller.io_offset = cvmx_pcie_get_io_base_address(1) - cvmx_pcie_get_io_base_address(0); /* * To keep things similar to PCI, we start device * addresses at the same place as PCI uisng big bar * support. This normally translates to 4GB-256MB, * which is the same as most x86 PCs. */ octeon_pcie1_controller.mem_resource->start = cvmx_pcie_get_mem_base_address(1) + (4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20); octeon_pcie1_controller.mem_resource->end = cvmx_pcie_get_mem_base_address(1) + cvmx_pcie_get_mem_size(1) - 1; /* * Ports must be above 16KB for the ISA bus filtering * in the PCI-X to PCI bridge. */ octeon_pcie1_controller.io_resource->start = cvmx_pcie_get_io_base_address(1) - cvmx_pcie_get_io_base_address(0); octeon_pcie1_controller.io_resource->end = octeon_pcie1_controller.io_resource->start + cvmx_pcie_get_io_size(1) - 1; msleep(100); /* Some devices need extra time */ register_pci_controller(&octeon_pcie1_controller); device0 = cvmx_pcie_config_read32(1, 0, 0, 0, 0); enable_pcie_bus_num_war[1] = device_needs_bus_num_war(device0); } } else { pr_notice("PCIe: Port 1 not in root complex mode, skipping.\n"); /* CN63XX pass 1_x/2.0 errata PCIe-15205 */ if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) { srio_war15205 += 1; port = 1; } } /* * CN63XX pass 1_x/2.0 errata PCIe-15205 requires setting all * of SRIO MACs SLI_CTL_PORT*[INT*_MAP] to similar value and * all of PCIe Macs SLI_CTL_PORT*[INT*_MAP] to different value * from the previous set values */ if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) { if (srio_war15205 == 1) { sli_ctl_portx.u64 = cvmx_read_csr(CVMX_PEXP_SLI_CTL_PORTX(port)); sli_ctl_portx.s.inta_map = 1; sli_ctl_portx.s.intb_map = 1; sli_ctl_portx.s.intc_map = 1; sli_ctl_portx.s.intd_map = 1; cvmx_write_csr(CVMX_PEXP_SLI_CTL_PORTX(port), sli_ctl_portx.u64); sli_ctl_portx.u64 = cvmx_read_csr(CVMX_PEXP_SLI_CTL_PORTX(!port)); sli_ctl_portx.s.inta_map = 0; sli_ctl_portx.s.intb_map = 0; sli_ctl_portx.s.intc_map = 0; sli_ctl_portx.s.intd_map = 0; cvmx_write_csr(CVMX_PEXP_SLI_CTL_PORTX(!port), sli_ctl_portx.u64); } } octeon_pci_dma_init(); return 0; } arch_initcall(octeon_pcie_setup);