471 lines
13 KiB
C
471 lines
13 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
|
|
||
|
|
// motu-protocol-v1.c - a part of driver for MOTU FireWire series
|
||
|
|
//
|
||
|
|
// Copyright (c) 2021 Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
||
|
|
//
|
||
|
|
// Licensed under the terms of the GNU General Public License, version 2.
|
||
|
|
|
||
|
|
#include "motu.h"
|
||
|
|
|
||
|
|
#include <linux/delay.h>
|
||
|
|
|
||
|
|
// Status register for MOTU 828 (0x'ffff'f000'0b00).
|
||
|
|
//
|
||
|
|
// 0xffff0000: ISOC_COMM_CONTROL_MASK in motu-stream.c.
|
||
|
|
// 0x00008000: mode of optical input interface.
|
||
|
|
// 0x00008000: for S/PDIF signal.
|
||
|
|
// 0x00000000: disabled or for ADAT signal.
|
||
|
|
// 0x00004000: mode of optical output interface.
|
||
|
|
// 0x00004000: for S/PDIF signal.
|
||
|
|
// 0x00000000: disabled or for ADAT signal.
|
||
|
|
// 0x00003f00: monitor input mode.
|
||
|
|
// 0x00000800: analog-1/2
|
||
|
|
// 0x00001a00: analog-3/4
|
||
|
|
// 0x00002c00: analog-5/6
|
||
|
|
// 0x00003e00: analog-7/8
|
||
|
|
// 0x00000000: analog-1
|
||
|
|
// 0x00000900: analog-2
|
||
|
|
// 0x00001200: analog-3
|
||
|
|
// 0x00001b00: analog-4
|
||
|
|
// 0x00002400: analog-5
|
||
|
|
// 0x00002d00: analog-6
|
||
|
|
// 0x00003600: analog-7
|
||
|
|
// 0x00003f00: analog-8
|
||
|
|
// 0x00000080: enable stream input.
|
||
|
|
// 0x00000040: disable monitor input.
|
||
|
|
// 0x00000008: enable main out.
|
||
|
|
// 0x00000004: rate of sampling clock.
|
||
|
|
// 0x00000004: 48.0 kHz
|
||
|
|
// 0x00000000: 44.1 kHz
|
||
|
|
// 0x00000023: source of sampling clock.
|
||
|
|
// 0x00000003: source packet header (SPH)
|
||
|
|
// 0x00000002: S/PDIF on optical/coaxial interface.
|
||
|
|
// 0x00000021: ADAT on optical interface
|
||
|
|
// 0x00000001: ADAT on Dsub 9pin
|
||
|
|
// 0x00000000: internal
|
||
|
|
|
||
|
|
#define CLK_828_STATUS_OFFSET 0x0b00
|
||
|
|
#define CLK_828_STATUS_MASK 0x0000ffff
|
||
|
|
#define CLK_828_STATUS_FLAG_OPT_IN_IFACE_IS_SPDIF 0x00008000
|
||
|
|
#define CLK_828_STATUS_FLAG_OPT_OUT_IFACE_IS_SPDIF 0x00004000
|
||
|
|
#define CLK_828_STATUS_FLAG_FETCH_PCM_FRAMES 0x00000080
|
||
|
|
#define CLK_828_STATUS_FLAG_ENABLE_OUTPUT 0x00000008
|
||
|
|
#define CLK_828_STATUS_FLAG_RATE_48000 0x00000004
|
||
|
|
#define CLK_828_STATUS_MASK_SRC 0x00000023
|
||
|
|
#define CLK_828_STATUS_FLAG_SRC_ADAT_ON_OPT 0x00000021
|
||
|
|
#define CLK_828_STATUS_FLAG_SRC_SPH 0x00000003
|
||
|
|
#define CLK_828_STATUS_FLAG_SRC_SPDIF 0x00000002
|
||
|
|
#define CLK_828_STATUS_FLAG_SRC_ADAT_ON_DSUB 0x00000001
|
||
|
|
#define CLK_828_STATUS_FLAG_SRC_INTERNAL 0x00000000
|
||
|
|
|
||
|
|
// Status register for MOTU 896 (0x'ffff'f000'0b14).
|
||
|
|
//
|
||
|
|
// 0xf0000000: enable physical and stream input to DAC.
|
||
|
|
// 0x80000000: disable
|
||
|
|
// 0x40000000: disable
|
||
|
|
// 0x20000000: enable (prior to the other bits)
|
||
|
|
// 0x10000000: disable
|
||
|
|
// 0x00000000: disable
|
||
|
|
// 0x08000000: speed of word clock signal output on BNC interface.
|
||
|
|
// 0x00000000: force to low rate (44.1/48.0 kHz).
|
||
|
|
// 0x08000000: follow to system clock.
|
||
|
|
// 0x04000000: something relevant to clock.
|
||
|
|
// 0x03000000: enable output.
|
||
|
|
// 0x02000000: enabled irreversibly once standing unless the device voluntarily disables it.
|
||
|
|
// 0x01000000: enabled irreversibly once standing unless the device voluntarily disables it.
|
||
|
|
// 0x00ffff00: monitor input mode.
|
||
|
|
// 0x00000000: disabled
|
||
|
|
// 0x00004800: analog-1/2
|
||
|
|
// 0x00005a00: analog-3/4
|
||
|
|
// 0x00006c00: analog-5/6
|
||
|
|
// 0x00007e00: analog-7/8
|
||
|
|
// 0x00104800: AES/EBU-1/2
|
||
|
|
// 0x00004000: analog-1
|
||
|
|
// 0x00004900: analog-2
|
||
|
|
// 0x00005200: analog-3
|
||
|
|
// 0x00005b00: analog-4
|
||
|
|
// 0x00006400: analog-5
|
||
|
|
// 0x00006d00: analog-6
|
||
|
|
// 0x00007600: analog-7
|
||
|
|
// 0x00007f00: analog-8
|
||
|
|
// 0x00104000: AES/EBU-1
|
||
|
|
// 0x00104900: AES/EBU-2
|
||
|
|
// 0x00000060: sample rate conversion for AES/EBU input/output.
|
||
|
|
// 0x00000000: None
|
||
|
|
// 0x00000020: input signal is converted to system rate
|
||
|
|
// 0x00000040: output is slave to input, ignoring system rate
|
||
|
|
// 0x00000060: output is double rate than system rate
|
||
|
|
// 0x00000018: nominal rate of sampling clock.
|
||
|
|
// 0x00000000: 44.1 kHz
|
||
|
|
// 0x00000008: 48.0 kHz
|
||
|
|
// 0x00000010: 88.2 kHz
|
||
|
|
// 0x00000018: 96.0 kHz
|
||
|
|
// 0x00000007: source of sampling clock.
|
||
|
|
// 0x00000000: internal
|
||
|
|
// 0x00000001: ADAT on optical interface
|
||
|
|
// 0x00000002: AES/EBU on XLR
|
||
|
|
// 0x00000003: source packet header (SPH)
|
||
|
|
// 0x00000004: word clock on BNC
|
||
|
|
// 0x00000005: ADAT on Dsub 9pin
|
||
|
|
|
||
|
|
#define CLK_896_STATUS_OFFSET 0x0b14
|
||
|
|
#define CLK_896_STATUS_FLAG_FETCH_ENABLE 0x20000000
|
||
|
|
#define CLK_896_STATUS_FLAG_OUTPUT_ON 0x03000000
|
||
|
|
#define CLK_896_STATUS_MASK_SRC 0x00000007
|
||
|
|
#define CLK_896_STATUS_FLAG_SRC_INTERNAL 0x00000000
|
||
|
|
#define CLK_896_STATUS_FLAG_SRC_ADAT_ON_OPT 0x00000001
|
||
|
|
#define CLK_896_STATUS_FLAG_SRC_AESEBU 0x00000002
|
||
|
|
#define CLK_896_STATUS_FLAG_SRC_SPH 0x00000003
|
||
|
|
#define CLK_896_STATUS_FLAG_SRC_WORD 0x00000004
|
||
|
|
#define CLK_896_STATUS_FLAG_SRC_ADAT_ON_DSUB 0x00000005
|
||
|
|
#define CLK_896_STATUS_MASK_RATE 0x00000018
|
||
|
|
#define CLK_896_STATUS_FLAG_RATE_44100 0x00000000
|
||
|
|
#define CLK_896_STATUS_FLAG_RATE_48000 0x00000008
|
||
|
|
#define CLK_896_STATUS_FLAG_RATE_88200 0x00000010
|
||
|
|
#define CLK_896_STATUS_FLAG_RATE_96000 0x00000018
|
||
|
|
|
||
|
|
static void parse_clock_rate_828(u32 data, unsigned int *rate)
|
||
|
|
{
|
||
|
|
if (data & CLK_828_STATUS_FLAG_RATE_48000)
|
||
|
|
*rate = 48000;
|
||
|
|
else
|
||
|
|
*rate = 44100;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int get_clock_rate_828(struct snd_motu *motu, unsigned int *rate)
|
||
|
|
{
|
||
|
|
__be32 reg;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
parse_clock_rate_828(be32_to_cpu(reg), rate);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int parse_clock_rate_896(u32 data, unsigned int *rate)
|
||
|
|
{
|
||
|
|
switch (data & CLK_896_STATUS_MASK_RATE) {
|
||
|
|
case CLK_896_STATUS_FLAG_RATE_44100:
|
||
|
|
*rate = 44100;
|
||
|
|
break;
|
||
|
|
case CLK_896_STATUS_FLAG_RATE_48000:
|
||
|
|
*rate = 48000;
|
||
|
|
break;
|
||
|
|
case CLK_896_STATUS_FLAG_RATE_88200:
|
||
|
|
*rate = 88200;
|
||
|
|
break;
|
||
|
|
case CLK_896_STATUS_FLAG_RATE_96000:
|
||
|
|
*rate = 96000;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return -ENXIO;
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int get_clock_rate_896(struct snd_motu *motu, unsigned int *rate)
|
||
|
|
{
|
||
|
|
__be32 reg;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
return parse_clock_rate_896(be32_to_cpu(reg), rate);
|
||
|
|
}
|
||
|
|
|
||
|
|
int snd_motu_protocol_v1_get_clock_rate(struct snd_motu *motu, unsigned int *rate)
|
||
|
|
{
|
||
|
|
if (motu->spec == &snd_motu_spec_828)
|
||
|
|
return get_clock_rate_828(motu, rate);
|
||
|
|
else if (motu->spec == &snd_motu_spec_896)
|
||
|
|
return get_clock_rate_896(motu, rate);
|
||
|
|
else
|
||
|
|
return -ENXIO;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int set_clock_rate_828(struct snd_motu *motu, unsigned int rate)
|
||
|
|
{
|
||
|
|
__be32 reg;
|
||
|
|
u32 data;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
data = be32_to_cpu(reg) & CLK_828_STATUS_MASK;
|
||
|
|
|
||
|
|
data &= ~CLK_828_STATUS_FLAG_RATE_48000;
|
||
|
|
if (rate == 48000)
|
||
|
|
data |= CLK_828_STATUS_FLAG_RATE_48000;
|
||
|
|
|
||
|
|
reg = cpu_to_be32(data);
|
||
|
|
return snd_motu_transaction_write(motu, CLK_828_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
}
|
||
|
|
|
||
|
|
static int set_clock_rate_896(struct snd_motu *motu, unsigned int rate)
|
||
|
|
{
|
||
|
|
unsigned int flag;
|
||
|
|
__be32 reg;
|
||
|
|
u32 data;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
data = be32_to_cpu(reg);
|
||
|
|
|
||
|
|
switch (rate) {
|
||
|
|
case 44100:
|
||
|
|
flag = CLK_896_STATUS_FLAG_RATE_44100;
|
||
|
|
break;
|
||
|
|
case 48000:
|
||
|
|
flag = CLK_896_STATUS_FLAG_RATE_48000;
|
||
|
|
break;
|
||
|
|
case 88200:
|
||
|
|
flag = CLK_896_STATUS_FLAG_RATE_88200;
|
||
|
|
break;
|
||
|
|
case 96000:
|
||
|
|
flag = CLK_896_STATUS_FLAG_RATE_96000;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
data &= ~CLK_896_STATUS_MASK_RATE;
|
||
|
|
data |= flag;
|
||
|
|
|
||
|
|
reg = cpu_to_be32(data);
|
||
|
|
return snd_motu_transaction_write(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
}
|
||
|
|
|
||
|
|
int snd_motu_protocol_v1_set_clock_rate(struct snd_motu *motu, unsigned int rate)
|
||
|
|
{
|
||
|
|
if (motu->spec == &snd_motu_spec_828)
|
||
|
|
return set_clock_rate_828(motu, rate);
|
||
|
|
else if (motu->spec == &snd_motu_spec_896)
|
||
|
|
return set_clock_rate_896(motu, rate);
|
||
|
|
else
|
||
|
|
return -ENXIO;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int get_clock_source_828(struct snd_motu *motu, enum snd_motu_clock_source *src)
|
||
|
|
{
|
||
|
|
__be32 reg;
|
||
|
|
u32 data;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
data = be32_to_cpu(reg) & CLK_828_STATUS_MASK;
|
||
|
|
|
||
|
|
switch (data & CLK_828_STATUS_MASK_SRC) {
|
||
|
|
case CLK_828_STATUS_FLAG_SRC_ADAT_ON_OPT:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_OPT;
|
||
|
|
break;
|
||
|
|
case CLK_828_STATUS_FLAG_SRC_SPH:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_SPH;
|
||
|
|
break;
|
||
|
|
case CLK_828_STATUS_FLAG_SRC_SPDIF:
|
||
|
|
{
|
||
|
|
if (data & CLK_828_STATUS_FLAG_OPT_IN_IFACE_IS_SPDIF)
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_SPDIF_ON_COAX;
|
||
|
|
else
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_SPDIF_ON_OPT;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
case CLK_828_STATUS_FLAG_SRC_ADAT_ON_DSUB:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_DSUB;
|
||
|
|
break;
|
||
|
|
case CLK_828_STATUS_FLAG_SRC_INTERNAL:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_INTERNAL;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return -ENXIO;
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int get_clock_source_896(struct snd_motu *motu, enum snd_motu_clock_source *src)
|
||
|
|
{
|
||
|
|
__be32 reg;
|
||
|
|
u32 data;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
data = be32_to_cpu(reg);
|
||
|
|
|
||
|
|
switch (data & CLK_896_STATUS_MASK_SRC) {
|
||
|
|
case CLK_896_STATUS_FLAG_SRC_INTERNAL:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_INTERNAL;
|
||
|
|
break;
|
||
|
|
case CLK_896_STATUS_FLAG_SRC_ADAT_ON_OPT:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_OPT;
|
||
|
|
break;
|
||
|
|
case CLK_896_STATUS_FLAG_SRC_AESEBU:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_AESEBU_ON_XLR;
|
||
|
|
break;
|
||
|
|
case CLK_896_STATUS_FLAG_SRC_SPH:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_SPH;
|
||
|
|
break;
|
||
|
|
case CLK_896_STATUS_FLAG_SRC_WORD:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_WORD_ON_BNC;
|
||
|
|
break;
|
||
|
|
case CLK_896_STATUS_FLAG_SRC_ADAT_ON_DSUB:
|
||
|
|
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_DSUB;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return -ENXIO;
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
int snd_motu_protocol_v1_get_clock_source(struct snd_motu *motu, enum snd_motu_clock_source *src)
|
||
|
|
{
|
||
|
|
if (motu->spec == &snd_motu_spec_828)
|
||
|
|
return get_clock_source_828(motu, src);
|
||
|
|
else if (motu->spec == &snd_motu_spec_896)
|
||
|
|
return get_clock_source_896(motu, src);
|
||
|
|
else
|
||
|
|
return -ENXIO;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int switch_fetching_mode_828(struct snd_motu *motu, bool enable)
|
||
|
|
{
|
||
|
|
__be32 reg;
|
||
|
|
u32 data;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
data = be32_to_cpu(reg) & CLK_828_STATUS_MASK;
|
||
|
|
|
||
|
|
data &= ~(CLK_828_STATUS_FLAG_FETCH_PCM_FRAMES | CLK_828_STATUS_FLAG_ENABLE_OUTPUT);
|
||
|
|
if (enable) {
|
||
|
|
// This transaction should be initiated after the device receives batch of packets
|
||
|
|
// since the device voluntarily mutes outputs. As a workaround, yield processor over
|
||
|
|
// 100 msec.
|
||
|
|
msleep(100);
|
||
|
|
data |= CLK_828_STATUS_FLAG_FETCH_PCM_FRAMES | CLK_828_STATUS_FLAG_ENABLE_OUTPUT;
|
||
|
|
}
|
||
|
|
|
||
|
|
reg = cpu_to_be32(data);
|
||
|
|
return snd_motu_transaction_write(motu, CLK_828_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
}
|
||
|
|
|
||
|
|
static int switch_fetching_mode_896(struct snd_motu *motu, bool enable)
|
||
|
|
{
|
||
|
|
__be32 reg;
|
||
|
|
u32 data;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
data = be32_to_cpu(reg);
|
||
|
|
|
||
|
|
data &= ~CLK_896_STATUS_FLAG_FETCH_ENABLE;
|
||
|
|
if (enable)
|
||
|
|
data |= CLK_896_STATUS_FLAG_FETCH_ENABLE | CLK_896_STATUS_FLAG_OUTPUT_ON;
|
||
|
|
|
||
|
|
reg = cpu_to_be32(data);
|
||
|
|
return snd_motu_transaction_write(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
}
|
||
|
|
|
||
|
|
int snd_motu_protocol_v1_switch_fetching_mode(struct snd_motu *motu, bool enable)
|
||
|
|
{
|
||
|
|
if (motu->spec == &snd_motu_spec_828)
|
||
|
|
return switch_fetching_mode_828(motu, enable);
|
||
|
|
else if (motu->spec == &snd_motu_spec_896)
|
||
|
|
return switch_fetching_mode_896(motu, enable);
|
||
|
|
else
|
||
|
|
return -ENXIO;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int detect_packet_formats_828(struct snd_motu *motu)
|
||
|
|
{
|
||
|
|
__be32 reg;
|
||
|
|
u32 data;
|
||
|
|
int err;
|
||
|
|
|
||
|
|
motu->tx_packet_formats.pcm_byte_offset = 4;
|
||
|
|
motu->tx_packet_formats.msg_chunks = 2;
|
||
|
|
|
||
|
|
motu->rx_packet_formats.pcm_byte_offset = 4;
|
||
|
|
motu->rx_packet_formats.msg_chunks = 0;
|
||
|
|
|
||
|
|
err = snd_motu_transaction_read(motu, CLK_828_STATUS_OFFSET, ®, sizeof(reg));
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
data = be32_to_cpu(reg) & CLK_828_STATUS_MASK;
|
||
|
|
|
||
|
|
// The number of chunks is just reduced when SPDIF is activated.
|
||
|
|
if (!(data & CLK_828_STATUS_FLAG_OPT_IN_IFACE_IS_SPDIF))
|
||
|
|
motu->tx_packet_formats.pcm_chunks[0] += 8;
|
||
|
|
|
||
|
|
if (!(data & CLK_828_STATUS_FLAG_OPT_OUT_IFACE_IS_SPDIF))
|
||
|
|
motu->rx_packet_formats.pcm_chunks[0] += 8;
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int detect_packet_formats_896(struct snd_motu *motu)
|
||
|
|
{
|
||
|
|
// 24bit PCM frames follow to source packet header without message chunk.
|
||
|
|
motu->tx_packet_formats.pcm_byte_offset = 4;
|
||
|
|
motu->rx_packet_formats.pcm_byte_offset = 4;
|
||
|
|
|
||
|
|
// No message chunk in data block.
|
||
|
|
motu->tx_packet_formats.msg_chunks = 0;
|
||
|
|
motu->rx_packet_formats.msg_chunks = 0;
|
||
|
|
|
||
|
|
// Always enable optical interface for ADAT signal since the device have no registers
|
||
|
|
// to refer to current configuration.
|
||
|
|
motu->tx_packet_formats.pcm_chunks[0] += 8;
|
||
|
|
motu->tx_packet_formats.pcm_chunks[1] += 8;
|
||
|
|
|
||
|
|
motu->rx_packet_formats.pcm_chunks[0] += 8;
|
||
|
|
motu->rx_packet_formats.pcm_chunks[1] += 8;
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
int snd_motu_protocol_v1_cache_packet_formats(struct snd_motu *motu)
|
||
|
|
{
|
||
|
|
memcpy(motu->tx_packet_formats.pcm_chunks, motu->spec->tx_fixed_pcm_chunks,
|
||
|
|
sizeof(motu->tx_packet_formats.pcm_chunks));
|
||
|
|
memcpy(motu->rx_packet_formats.pcm_chunks, motu->spec->rx_fixed_pcm_chunks,
|
||
|
|
sizeof(motu->rx_packet_formats.pcm_chunks));
|
||
|
|
|
||
|
|
if (motu->spec == &snd_motu_spec_828)
|
||
|
|
return detect_packet_formats_828(motu);
|
||
|
|
else if (motu->spec == &snd_motu_spec_896)
|
||
|
|
return detect_packet_formats_896(motu);
|
||
|
|
else
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
const struct snd_motu_spec snd_motu_spec_828 = {
|
||
|
|
.name = "828",
|
||
|
|
.protocol_version = SND_MOTU_PROTOCOL_V1,
|
||
|
|
.tx_fixed_pcm_chunks = {10, 0, 0},
|
||
|
|
.rx_fixed_pcm_chunks = {10, 0, 0},
|
||
|
|
};
|
||
|
|
|
||
|
|
const struct snd_motu_spec snd_motu_spec_896 = {
|
||
|
|
.name = "896",
|
||
|
|
.tx_fixed_pcm_chunks = {10, 10, 0},
|
||
|
|
.rx_fixed_pcm_chunks = {10, 10, 0},
|
||
|
|
};
|